What constitutes an ideal dental restorative material?

Intense environmental concerns recently have prompted dentistry to evaluate the performance and environmental impact of existing restoration materials. Doing so entices us to explore the 'what if?' innovation in materials science to create more ideal restorative materials. Articulating a specification for our design and evaluation methods is proving to be more complicated than originally anticipated. Challenges exist not only in specifying how the material should be manipulated and perform clinically but also in understanding and incorporating implications of the skill of the operator placing the restoration, economic considerations, expectations patients have for their investment, cost-effectiveness, influences of the health care system on how and for whom restorations are to be placed, and global challenges that limit the types of materials available in different areas of the world. The quandary is to find ways to actively engage multiple stakeholders to agree on priorities and future actions to focus future directions on the creation of more ideal restorative materials that can be available throughout the world.

Yellow fever vaccination in organ transplanted patients: is it safe? A multicenter study.

BACKGROUND: Yellow fever (YF) may be very serious, with mortality reaching 50%. Live attenuated virus YF vaccine (YFV) is effective, but may present, although rare, life-threatening side effects and is contraindicated in immunocompromised patients. However, some transplant patients may inadvertently receive the vaccine. METHODS: A questionnaire was sent to all associated doctors to the Brazilian Organ Transplantation Association through its website, calling for reports of organ transplanted patients who have been vaccinated against YF. RESULTS: Twelve doctors reported 19 cases. None had important side effects. Only one had slight reaction at the site of YFV injection. Eleven patients were male. Organs received were 14 kidneys, 3 hearts, and 2 livers. Twelve patients received organs from deceased donors. Mean age at YFV was 45.6 ± 13.6 years old (range 11-69); creatinine: 1.46 ± 0.62 mg/dL (range 0.8-3.4); post-transplant time: 65 ± 83.9 months (range 3-340); and time from YFV at the time of survey: 45 ± 51 months (range 3-241). Immunosuppression varied widely with different drug combinations: azathioprine (7 patients), cyclosporine (8), deflazacort (1), mycophenolate (10), prednisone (11), sirolimus (3), and tacrolimus (4). CONCLUSIONS: YFV showed no important side effects in this cohort of solid organ transplanted patients. However, owing to the small number of studied patients, it is not possible to extend these findings to the rest of the transplanted population, assuring safety. Therefore, these data are not strong enough to safely recommend YFV in organ transplanted recipients, as severe, even life-threatening side effects may occur.

Effects of potassium oxalate on knoop hardness of etch-and-rinse adhesives.

The objective of this study was to determine whether the hardness of etch-and-rinse adhesives may be affected by the pretreatment of acid-etched dentin with potassium oxalate desensitizer. Unerupted human third molars were cut into crown segments by removing the occlusal enamel and roots. The pulp chamber of these crown segments was connected to a syringe barrel filled with phosphate-buffered saline so that the moisture of dentin was maintained during the bonding procedures. Three etch-and-rinse adhesives-two two-step systems (Adper Single Bond 2 [SB], One-Step [OS]) and one three-step system (Adper Scotchbond Multi-Purpose [MP])-were applied to acid-etched dentin that had been treated (experimental groups) or not (control groups) with potassium oxalate (BisBlock). The Knoop hardness (KHN) of adhesives was taken at different sites of the outer surface of the adhesive-bonded dentin. The KHN of the three tested adhesives applied to acid-etched dentin treated with potassium oxalate was significantly lower than that exhibited by the respective controls (not treated with oxalate; p<0.05). Regardless of the adhesive, the treatment with potassium oxalate reduced the adhesives' KHN (p<0.05), with the OS system exhibiting the lowest KHN compared with the MP and SB systems.

Methods used by Dental Practice-based Research Network (DPBRN) dentists to diagnose dental caries.

OBJECTIVES: To (1) identify the methods that dentists in The Dental Practice-Based Research Network (DPBRN) use to diagnose dental caries; (2) quantify their frequency of use and (3) test the hypothesis that certain dentist and dental practice characteristics are significantly associated with their use. METHODS: A questionnaire about methods used for caries diagnosis was sent to DPBRN dentists who reported doing some restorative dentistry; 522 dentists participated. Questions included the use of dental radiographs, the dental explorer, laser fluorescence, air-drying and fiber-optic devices and magnification as used when diagnosing primary, secondary/recurrent or non-specific caries lesions. Variations on the frequency of their use were tested using multivariate analysis and Bonferroni tests. RESULTS: Overall, the dental explorer was the instrument most commonly used to detect primary occlusal caries and caries at the margins of existing restorations. In contrast, laser fluorescence was rarely used to help diagnose occlusal primary caries. For proximal caries, radiographs were used to help diagnose 75%­100% of lesions by 96% of the DPBRN dentists. Dentists who use radiographs most often to assess proximal surfaces of posterior teeth were significantly more likely to also report providing a higher percentage of patients with individualized caries prevention (p=.040) and seeing a higher percentage of pediatric patients (p=.001). CONCLUSION: The use of specific diagnostic methods varied substantially. The dental explorer and radiographs are still the most commonly used diagnostic methods..

Does Shortened Application Time Affect Long-Term Bond Strength of Universal Adhesives to Dentin?

OBJECTIVE: This study evaluated the effect of shortened application time on long-term bond strength with universal adhesives. METHODS AND MATERIALS: Three universal adhesives were used: Clearfil Universal Bond (CU, Kuraray Noritake Dental Inc, Tokyo, Japan), Scotchbond Universal Adhesive (SB, 3M ESPE, St Paul, MN, USA) or G-Premio Bond (GP, GC Corp, Tokyo, Japan). Sixty molars were cut to expose midcoronal dentin and prepared with a regular diamond bur. Each adhesive was applied either according to the manufacturer's instruction or with shortened time. Specimens were stored in distilled water at 37°C for 24 hours and then cut into resin-dentin sticks. Microtensile bond strength (µTBS) was tested after either 24 hours or 1 year of water storage. Data were analyzed by the three-way ANOVA and Duncan tests ( α=0.05). Fracture modes were analyzed under a scanning electron microscope (SEM). One dentin stick per group was selected after fracture mode analysis and further observed using transmission electron microscopy (TEM). Six additional dentin discs were prepared and conditioned with each adhesive under the different application time to observe the adhesive-smear layer interaction by SEM. RESULTS: Shortened application time affected the µTBS ( p<0.001) while storage time did not affect bond strength ( p=0.187). A significant effect of shortened application time on µTBS was observed in the CU at 1 year and in the GP at both storage times. CONCLUSIONS: One-year storage time had no effect on the µTBS of universal adhesives to bur-cut dentin. The performance of universal adhesives can be compromised when applied using a shortened application time.

In vivo preservation of the hybrid layer by chlorhexidine.

Host-derived proteases have been reported to degrade the collagen matrix of incompletely-resin-infiltrated dentin. This study tested the hypothesis that interfacial degradation of resin-dentin bonds may be prevented or delayed by the application of chlorhexidine (CHX), a matrix metalloproteinase inhibitor, to dentin after phosphoric acid-etching. Contralateral pairs of resin-bonded Class I restorations in non-carious third molars were kept under intra-oral function for 14 months. Preservation of resin-dentin bonds was assessed by microtensile bond strength tests and TEM examination. In vivo bond strength remained stable in the CHX-treated specimens, while bond strength decreased significantly in control teeth. Resin-infiltrated dentin in CHX-treated specimens exhibited normal structural integrity of the collagen network. Conversely, progressive disintegration of the fibrillar network was identified in control specimens. Auto-degradation of collagen matrices can occur in resin-infiltrated dentin, but may be prevented by the application of a synthetic protease inhibitor, such as chlorhexidine.

Chlorhexidine preserves dentin bond in vitro.

Loss of hybrid layer integrity compromises resin-dentin bond stability. Matrix metalloproteinases (MMPs) may be partially responsible for hybrid layer degradation. Since chlorhexidine inhibits MMPs, we hypothesized that chlorhexidine would decelerate the loss of resin-dentin bonds. Class I preparations in extracted third molars were sectioned into two halves. One half was customarily restored (etch-and-rinse adhesive/resin composite), and the other was treated with 2% chlorhexidine after being acid-etched before restoration. Specimens were stored in artificial saliva with/without protease inhibitors. Microtensile bond strengths and failure mode distribution under SEM were analyzed immediately after specimens' preparation and 6 months later. With chlorhexidine, significantly better preservation of bond strength was observed after 6 months; protease inhibitors in the storage medium had no effect. Failure analysis showed significantly less failure in the hybrid layer with chlorhexidine, compared with controls after 6 months. In conclusion, this in vitro study suggests that chlorhexidine might be useful for the preservation of dentin bond strength.

The potential effect of ultra-long insulin degludec on glycemic variability.

Despite the therapeutic advances in the treatment of diabetes, metabolic control instability due to glycemic variability (GV) is frequently observed in patients with diabetes on intensive insulin therapy and is associated with hyperglycemic peaks and hypoglycemic episodes. Hyperglycemia associated with GV has been implicated in the development of chronic complications due to its pro-oxidative consequences. On the other hand, hypoglycemia can be associated with increased cardiovascular risk secondarily to adrenergic activation. The ultra-long-acting insulin analogue, insulin degludec (IDeg), presents a flat and stable glucose-lowering effect both in Type 1 and Type 2 diabetes patients. In pharmacodynamic studies, IDeg has been associated with a lower variability in its insulin action than other alternatives for basal insulin, which might have clinical advantages for the stability of the glycemic control. The main objective of this review is to present pharmacological and clinical data regarding the efficacy and safety of IDeg for the treatment of diabetes focusing on its effects on GV and on hypoglycemia frequency.

Evaluation of a self-limiting concept in dentinal caries removal.

The mechanical removal of dentinal caries traditionally involves the use of tactile sensation and/or caries-indicating dyes. This study tested the hypothesis that self-limiting polymer burs are as effective as conventional carbide burs in creating substrates for dentin bonding. Carious dentin from extracted human molars was removed with carbide or polymer burs, with dental explorer hardness as the end-point for caries removal. Dentin substrates were bonded with etch-and-rinse or self-etch adhesives and prepared for microtensile bond testing and transmission electron microscopy. For each bur type, there was no difference in bond strength between adhesives. However, the polymer bur surface exhibited significantly lower bond strengths than the carbide bur, and both were lower than flat, non-carious dentin controls. TEM revealed areas of incompletely removed, denatured caries-infected dentin in the polymer bur specimens. These first-generation polymer burs might best be utilized for deep caries removal where pulpal exposure is a concern.

Incompatibility of oxalate desensitizers with acidic, fluoride-containing total-etch adhesives.

The use of oxalate desensitizers on acid-etched dentin prior to adhesive application can result in subsurface tubular occlusion by calcium oxalate crystals. However, the solubility of calcium oxalate increases in acidic solution. We hypothesized that total-etch adhesives can, depending upon their pH, interact with oxalate-desensitizer-treated dentin in an adverse manner. Acid-etched human dentin treated with 2 oxalate desensitizers (BisBlock and Super Seal) was bonded with 4 simplified total-etch adhesives: One-Step (OS), Single Bond (SB), OptiBond Solo Plus (OB), and Prime&Bond NT (PB). Composite-dentin beams were examined by SEM and TEM, both of which revealed numerous spherical globules on OB- and PB-bonded, desensitizer-treated dentin, but not in OS or SB samples. Bond strengths produced by OB and PB were significantly lower in oxalate-treated specimens than those produced by OS or SB. These surface globules may have interfered with hybridization of demineralized dentin with OB and PB resins and caused compromised bond strengths.

A laparoscopic approach to allograft nephrectomy and bilateral native nephrectomy: a case report.

INTRODUCTION: Laparoscopic surgery is rapidly emerging as the standard of care for a variety of urological conditions, even among patients who have undergone prior renal transplantation. We describe the technique of bilateral native nephrectomy and allograft nephrectomy by laparoscopy. CASE REPORT: A 32-year-old man with end-stage renal disease who had undergone a cadaveric renal transplant presented with chronic graft dysfunction. He had received a living donor kidney transplant with a postoperative course complicated by persistent proteinuria and refractory hypertension. Our nephrology service indicated the need for bilateral native nephrectomy and allograft nephrectomy for better blood pressure control following a second transplant. Bilateral native nephrectomy was performed following the previous reported techniques for pure laparoscopic nephrectomy. Allograft nephrectomy started by dissection of the iliac vessels to identify the vascular anastomosis. The hilum of the transplanted kidney was accessed. The renal vessels were clipped and transected. The ureter was identified and clipped. All three kidneys were removed from the abdominal cavity through a 3-cm skin incision. RESULTS: The left nephrectomy took 25 minutes and the right nephrectomy, 40 minutes. The estimated blood loss was 300 mL and the total operative time was 210 minutes. The patient had an uneventful postoperative course and was discharged on the third postoperative day. CONCLUSIONS: We demonstrate the feasibility of laparoscopic allograft nephrectomy and bilateral native nephrectomy in a transplant recipient.

Effects of Temperature and Aging on Working/Setting Time of Dual-cured Resin Cements.

OBJECTIVES: To evaluate the effects of aging and temperature on working time (WT) and setting time (ST) of several dual-cured resin cements. METHODS: WT and ST were determined with a thermo-controlled stage oscillating rheometer. New cement kits were used for the study. Cements were mixed according to instructions and dispensed on the oscillating stage that was preset at 22°C or 37°C. Rheologic charts were generated from the beginning of mixing until no further oscillation was detected. After initial measurements, cement kits were aged at 37°C for 12 weeks, and WT/ST was determined again at both temperatures. Five samples were read for each material and condition. Data were analyzed with repeated measures analysis of variance and a Tukey test at α=5% for each individual material. RESULTS: The WT and ST of all cements were significantly affected by temperature and aging (p<0.05). In general, higher temperature accelerated WT/ST, but aging effects were material dependent. Some materials presented reduced WT/ST, whereas others showed increased WT/ST, regardless of the temperature. CONCLUSIONS: The WT and ST were significantly affected by temperature variation and aging condition. Although temperature changes appeared to affect all materials similarly, aging effects were material dependent.

Effect of resin hydrophilicity and water storage on resin strength.

This study evaluated the change in the ultimate tensile strength (UTS) of five polymerised resin blends of increasing hydrophilicity, after ageing in distilled water or silicon oil. Resin blocks were prepared from each resin blend by dispensing the uncured resin into a flexible, embedding mould, containing multiple cavities. The resins were polymerised in the moulds under nitrogen at 551.6 kPa and light-activated at 125 degrees C for 10 min. After dry ageing for 24 h at 37 degrees C, the middle third of each resin specimen was trimmed into an 'I' shape. Fifteen control specimens were randomly selected from each resin blend for baseline UTS evaluation. The UTS of the experimental specimens were determined after 1, 3, 6 and 12 months of ageing in water or oil. The UTS of each group of resins at different storage periods in water or oil were analysed using the Friedman multiple ANOVA on ranks and Dunn's multiple comparison tests at 95% confidence level. Significant reduction (p < 0.01) in UTS was observed in Groups II-V resins after 12-month storage in water, while the most hydrophobic Group I resin showed no significant change (p > 0.05) in the same period. The percentage reduction in UTS increased with the hydrophilicity of the resin blends. Long-term water storage of hydrophilic resin blends such as those employed in dentine adhesives, resulted in a marked reduction in their mechanical strength that may compromise the durability of resin-dentine bonds.

H+-induced tension development in demineralized dentin matrix.

Recent atomic force microscopy studies have shown that acid-etching dentin causes the surface to recede. The purpose of this work was to test the hypothesis that acidic solutions can cause contraction of demineralized dentin matrix. Small beams of dentin were cut from extracted human third molars. The central region of each specimen was completely demineralized in EDTA. Specimens held in a tester were immersed in acidic solutions, and the amount of tension was recorded. Test variables included gauge length, cross-sectional area, pre-strain, and pH. The results showed that immersion of demineralized dentin in acidic solutions caused tension that was directly related both to H+ concentration at pH < 2 and to pre-strain. The contractile stress development (ca. 0.2-0.4 MPa) was sufficient to cause a collapse of demineralized dentin matrix. The mechanism for this effect probably involves H+-induced conformation changes in the collagen matrix.

Regional measurement of resin-dentin bonding as an array.

During the development of the microtensile bond-testing method, large variations in bond strengths were noted among serial sections. The reason for these variations is unknown. The purpose of this work was to determine the consistency of resin-dentin bond strengths across the occlusal surface of coronal dentin by dividing composite resin buildups into an array of 1x1 mm beams, the top half consisting of composite resin, and the bottom half consisting of dentin. Extracted human third molars had the occlusal enamel removed as a single section by means of a diamond saw. Resin composite buildups were made after the dentin was bonded with either One-Step or MacBond. After being stored in 37 degrees C water for 1 day, the teeth were vertically sectioned at 1-mm increments into slabs of bonded teeth. Each slab was further subdivided by vertical sections into 1x1x8 mm beams. Each beam was assigned an x-y coordinate and tested for tensile bond strength. Two different clinicians (A and B) performed the same procedures using One-Step in a parallel study. Using One-Step, clinician A obtained a large number of zero bonds in superficial dentin but fewer in deep dentin. This resulted in a very large standard deviation in bond strengths (mean +/- SD of 22+/-20 MPa in superficial dentin and 27+/-14 MPa in deep dentin). Clinician B obtained much higher (p<0.001) and more uniform bond strengths with One-Step (56+/-13 MPa in superficial dentin and 57+/-12 MPa in deep dentin). With MacBond, there were no zero bonds and hence less variation, with a mean of 41+/-13 MPa in superficial dentin and 27+/-12 MPa (x +/- SD) in deep dentin. When pairs of Z100 resin composite cylinders were bonded together with One-Step and then sectioned into an array, there was little variation in regional bond strength (37 +/-1 MPa). Dividing bonded resin composite buildups into an array of 20 to 30 1x1x8 mm beams allows for the evaluation of uniformity of resin-dentin bonds. The method used in this study detected local regional differences in resin-dentin bond strengths. The largest differences were shown to be related to technique rather than to material. The results indicate that resin-dentin bonds may not be as homogenous as was previously thought.

Integrating oxalate desensitizers with total-etch two-step adhesive.

Compromised bonding of total-etch adhesives to dentin treated with oxalate desensitizers results from the interference of a surface layer of acid-resistant crystals of calcium oxalate. We hypothesize that effective tubular occlusion and dentin bonding may be simultaneously achieved by depleting dentin surfaces of calcium with acids before desensitizer application. Dentin specimens treated with 4 oxalate desensitizers before or after being acid-etched were bonded with a two-step adhesive. Microtensile bond strengths ( micro TBS) were significantly lower, compared with the control, when oxalates were used before the specimens were acid-etched; in contrast, when oxalates were used after acid-etching. micro TBS were similar to nonoxalate-treated controls. Dentin surfaces and tubular orifices were covered with a surface layer of crystals when desensitizers were applied to fractured dentin and smear-layer-covered dentin before specimens were acid-etched. However, when the dentin was acid-etched prior to the application of oxalate desensitizers, the crystals were largely limited to the subsurface of dentinal tubules, where they did not interfere with subsequent resin bonding.

Collagen degradation by host-derived enzymes during aging.

Incompletely infiltrated collagen fibrils in acid-etched dentin are susceptible to degradation. We hypothesize that degradation can occur in the absence of bacteria. Partially demineralized collagen matrices (DCMs) prepared from human dentin were stored in artificial saliva. Control specimens were stored in artificial saliva containing proteolytic enzyme inhibitors, or pure mineral oil. We retrieved them at 24 hrs, 90 and 250 days to examine the extent of degradation of DCM. In the 24-hour experimental and 90- and 250-day control specimens, we observed 5- to 6-microm-thick layers of DCM containing banded collagen fibrils. DCMs were almost completely destroyed in the 250-day experimental specimens, but not when incubated with enzyme inhibitors or mineral oil. Functional enzyme analysis of dentin powder revealed low levels of collagenolytic activity that was inhibited by protease inhibitors or 0.2% chlorhexidine. We hypothesize that collagen degradation occurred over time, via host-derived matrix metalloproteinases that are released slowly over time.

Regional strengths of bonding agents to cervical sclerotic root dentin.

The regional bond strengths of three current-generation bonding systems (All Bond 2, Scotchbond Multi-Purpose, and Clearfil Liner Bond 2) were measured in natural wedge-shaped defects in the cervical area of extracted human teeth. A microtensile testing method was used to compare the strengths of resin bonds made to occlusal margins with those made to gingival margins. Controls consisted of normal teeth which had artificial wedge-shaped defects, of the same depth and dimension, created with a high-speed bur. The results indicated that there were no regional differences in bond strength, although bonds made to natural lesions were from 20 to 45% lower than those made to normal dentin in artificially created wedge-shaped defects, depending on the bonding agent. Scanning electron microscopy revealed that Clearfil Liner Bond 2 created the thinnest hybrid layers, which were difficult to measure in the natural lesions. The natural lesions contained sclerotic dentin, whereas the artificial lesions were composed of normal dentin. Although the bond strengths to sclerotic dentin were lower than those to normal dentin, the absolute values (ca. 16 to 17 MPa) were high relative to previous-generation bonding agents.

Reversal of compromised bonding to oxidized etched dentin.

The mechanism responsible for hydrogen-peroxide- or sodium-hypochlorite-induced reductions in dentin bond strength is unknown. This in vitro study tested the hypothesis that these oxidizing agents were responsible by attempting to reverse the effect with sodium ascorbate, a reducing agent. Human dentin was treated with these oxidants before or after being acid-etched and with or without post-treatment with sodium ascorbate. They were bonded with either Single Bond or Excite. Hydrogen peroxide reduced the bond strengths of both adhesives, while sodium hypochlorite produced reduction in adhesion of only Single Bond (p < 0.05). Following treatment with sodium ascorbate, reductions in bond strength were reversed. Transmission and scanning electron microscopy showed partial removal of the demineralized collagen matrix only by sodium hypochlorite. The observed compromised bond strengths cannot be attributed to incomplete deproteinization and may be related to changes in the redox potential of the bonding substrates.

Effects of HEMA/solvent combinations on bond strength to dentin.

Re-expansion of dried demineralized dentin is required to optimize resin adhesion. This study tested the hypothesis that bond strengths to dentin depend upon the ability of experimental HEMA(2-hydroxy-ethyl-methacrylate)/solvent primers to re-expand the matrix. Dentin surfaces were acid-etched with 37% phosphoric acid for 20 sec, air-dried for 30 sec, primed with either 35/65% (v/v) HEMA/water, HEMA/methanol, HEMA/ethanol, or HEMA/propanol for 60 sec, and bonded with 4-META-TBBO(4-methacryloyloxyethyl trimellitate anhydride-tri-n-butyl borane) adhesive. After storage in water for 1 day at 37 degrees C, the samples were prepared for microtensile bond strength testing. We used transmission electron microscopy to measure the width of interfibrillar spaces in the hybrid layers. The HEMA/ethanol primer and the HEMA/propanol primer produced the highest and the lowest bond strengths, respectively (p < 0.05). Bond strengths were directly correlated with the width of the interfibrillar spaces (p < 0.05). Bond strengths are related to the ability of the primer to maintain the re-expansion of collapsed demineralized dentin matrix.