Cachexia: Pathophysiology and Ghrelin Liposomes for Nose-to-Brain Delivery.

Cachexia, a severe multifactorial condition that is underestimated and unrecognized in patients, is characterized by continuous muscle mass loss that leads to progressive functional impairment, while nutritional support cannot completely reverse this clinical condition. There is a strong need for more effective and targeted therapies for cachexia patients. There is a need for drugs that act on cachexia as a distinct and treatable condition to prevent or reverse excess catabolism and inflammation. Due to ghrelin properties, it has been studied in the cachexia and other treatments in a growing number of works. However, in the body, exogenous ghrelin is subject to very rapid degradation. In this context, the intranasal release of ghrelin-loaded liposomes to cross the blood-brain barrier and the release of the drug into the central nervous system may be a promising alternative to improve its bioavailability. The administration of nose-to-brain liposomes for the management of cachexia was addressed only in a limited number of published works. This review focuses on the discussion of the pathophysiology of cachexia, synthesis and physiological effects of ghrelin and the potential treatment of the diseased using ghrelin-loaded liposomes through the nose-to-brain route.

ß-Cyclodextrin/Isopentyl Caffeate Inclusion Complex: Synthesis, Characterization and Antileishmanial Activity.

Isopentyl caffeate (ICaf) is a bioactive ester widely distributed in nature. Our patented work has shown promising results of this molecule against Leishmania. However, ICaf shows poor solubility, which limits its usage in clinical settings. In this work, we have proposed the development of an inclusion complex of ICaf in ß-cyclodextrin (ß-CD), with the aim to improve the drug solubility, and thus, its bioavailability. The inclusion complex (ICaf:ß-CD) was developed applying three distinct methods, i.e., physical mixture (PM), kneading (KN) or co-evaporation (CO) in different molar proportions (0.25:1, 1:1 and 2:1). Characterization of the complexes was carried out by thermal analysis, Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and molecular docking. The ICaf:ß-CD complex in a molar ratio of 1:1 obtained by CO showed the best complexation and, therefore, was selected for further analysis. Solubility assay showed a marked improvement in the ICaf:ß-CD (CO, 1:1) solubility profile when compared to the pure ICaf compound. Cell proliferation assay using ICaf:ß-CD complex showed an IC50 of 3.8 and 2.7 µg/mL against L. amazonesis and L. chagasi promastigotes, respectively. These results demonstrate the great potential of the inclusion complex to improve the treatment options for visceral and cutaneous leishmaniases.

Properties, Extraction Methods, and Delivery Systems for Curcumin as a Natural Source of Beneficial Health Effects.

This review discusses the impact of curcumin-an aromatic phytoextract from the turmeric (Curcuma longa) rhizome-as an effective therapeutic agent. Despite all of the beneficial health properties ensured by curcumin application, its pharmacological efficacy is compromised in vivo due to poor aqueous solubility, high metabolism, and rapid excretion that may result in poor systemic bioavailability. To overcome these problems, novel nanosystems have been proposed to enhance its bioavailability and bioactivity by reducing the particle size, the modification of surfaces, and the encapsulation efficiency of curcumin with different nanocarriers. The solutions based on nanotechnology can improve the perspective for medical patients with serious illnesses. In this review, we discuss commonly used curcumin-loaded bio-based nanoparticles that should be implemented for overcoming the innate constraints of this natural ingredient. Furthermore, the associated challenges regarding the potential applications in combination therapies are discussed as well.

Praziquantel-Solid Lipid Nanoparticles Produced by Supercritical Carbon Dioxide Extraction: Physicochemical Characterization, Release Profile, and Cytotoxicity.

Solid lipid nanoparticles (SLNs) can be produced by various methods, but most of them are difficult to scale up. Supercritical fluid (SCF) is an important tool to produce micro/nanoparticles with a narrow size distribution and high encapsulation efficiency. The aim of this work was to produce cetyl palmitate SLNs using SCF to be loaded with praziquantel (PZQ) as an insoluble model drug. The mean particle size (nm), polydispersity index (PdI), zeta potential, and encapsulation efficiency (EE) were determined on the freshly prepared samples, which were also subject of Differential Scanning Calorimetry (DSC), Fourier-Transform Infrared Spectroscopy (FTIR), drug release profile, and in vitro cytotoxicity analyses. PZQ-SLN exhibited a mean size of ~25 nm, PdI ~ 0.5, zeta potential ~-28 mV, and EE 88.37%. The DSC analysis demonstrated that SCF reduced the crystallinity of cetyl palmitate and favored the loading of PZQ into the lipid matrices. No chemical interaction between the PZQ and cetyl palmitate was revealed by FTIR analysis, while the release or PZQ from SLN followed the Weibull model. PZQ-SLN showed low cytotoxicity against fibroblasts cell lines. This study demonstrates that SCF may be a suitable scale-up procedure for the production of SLN, which have shown to be an appropriate carrier for PZQ.

Association of Silver Nanoparticles and Curcumin Solid Dispersion: Antimicrobial and Antioxidant Properties.

The last century, more precisely after 1945, was marked by major advances in the treatment of infectious diseases which promoted a decrease in mortality and morbidity. Despite these advances, currently the development of antimicrobial resistance has been growing drastically and therefore there is a pressing need to search for new compounds. Silver nanoparticles (AgNps) have been demonstrating good antimicrobial activity against different bacteria, viruses, and fungi. Curcumin (CUR) extracted from rhizomes of Curcuma longa has a variety of applications including antiinflammatory, antioxidant, and antibacterial agent. The association between silver nanoparticles and curcumin in a formulation can be a good alternative to control infectious diseases due the antimicrobial properties of both compounds. The objective of this work was to develop a formulation composed of a thermoresponsive gel-with antimicrobial and antioxidant properties due to the association of AgNps with PVP and PVA polymers. After AgNp synthesis, these were incorporated together with the previously prepared CUR/P407 (1:2) solid dispersion (SD) into a polymer dispersion of 20% P407 (thermosensitive gel). Our results showed that the association between the AgNps with CUR SD demonstrated good antioxidant activity as compared to the standard compound. Measures of MIC showed more efficacy against Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa) than for Gram-positive bacteria (Staphylococcus aureus). This association enhances antimicrobial activity against E. coli and P aeruginosa and added antioxidant value in formulations.

Spotlight on Biomimetic Systems Based on Lyotropic Liquid Crystal.

The behavior of lyotropic biomimetic systems in drug delivery was reviewed. These behaviors are influenced by drug properties, the initial water content, type of lyotropic liquid crystals (LLC), swell ability, drug loading rate, the presence of ions with higher or less kosmotropic or chaotropic force, and the electrostatic interaction between the drug and the lipid bilayers. The in vivo interaction between LCC-drugs, and the impact on the bioavailability of drugs, was reviewed. The LLC with a different architecture can be formed by the self-assembly of lipids in aqueous medium, and can be tuned by the structures and physical properties of the emulsion. These LLC lamellar phase, cubic phase, and hexagonal phase, possess fascinating viscoelastic properties, which make them useful as a dispersion technology, and a highly ordered, thermodynamically stable internal nanostructure, thereby offering the potential as a sustained drug release matrix for drug delivery. In addition, the biodegradable and biocompatible nature of lipids demonstrates a minimum toxicity and thus, they are used for various routes of administration. This review is not intended to provide a comprehensive overview, but focuses on the advantages over non modified conventional materials and LLC biomimetic properties.

Development of a water-in-oil-in-water multiple emulsion system integrating biomimetic aqueous-core lipid nanodroplets for protein entity stabilization. Part II: process and product characterization.

The aqueous-core enclosed in lipid nanoballoons integrating multiple emulsions of the type water-in-oil-in-water mimic, at least in theory, the environment within viable cells, thus being suitable for housing hydrophilic protein entities such as bioactive proteins, peptides and bacteriophage particles. This study reports a complete physicochemical characterization of optimized biomimetic aqueous-core lipid nanoballoons housing hydrophilic (BSA) protein entities, evolved from a statistical 23×31 factorial design study (three variables at two levels and one variable at three levels) that was the subject of the first paper of a series of three, aiming at complete stabilization of the three-dimensional structure of protein entities attempted via housing the said molecular entities within biomimetic aqueous-core lipid nanoballoons integrating a multiple (W/O/W) emulsion. The statistical factorial design followed led to the production of an optimum W/O/W multiple emulsion possessing quite homogeneous particles with an average hydrodynamic size of (186.2 ± 2.6) nm and average Zeta potential of (-36.5 ± 0.9) mV, and exhibiting a polydispersity index of 0.206 ± 0.014. Additionally, the results obtained for the diffusion coefficient of the lipid nanoballoons integrating the optimized W/O/W multiple emulsion were comparable and of the same order of magnitude (10-12 m2 s-1) as those published by other authors since, typically, diffusion coefficients for molecules range from 10-10 to 10-7 m2 s-1, but diffusion coefficients for nanoparticles are typically of the order of magnitude of 10-12 m2 s-1.

Nanostructured Lipid Carriers as a Strategy to Improve the In Vitro Schistosomiasis Activity of Praziquantel.

Praziquantel (PZQ) is a pyrazinoisoquinoline anthelmintic that was discovered in 1972 by Bayer Germany. Currently, due to its efficacy, PZQ is the drug of choice against all species of Schistosoma. Although widely used, PZQ exhibits low and erratic bioavailability because of its poor water solubility. Nanostructured lipid carriers (NLC), second-generation solid lipid nanoparticles, were developed in the 1990s to improve the bioavailability of poorly water soluble drugs. The aim of this study was to investigate nanostructured lipid carriers as a strategy to improve the efficacy of PZQ in S. mansoni treatment. We prepared NLC2 and NLC4 by adding seventy percent glycerol monostearate (GMS) as the solid lipid, 30% oleic acid (OA) as the liquid lipid and two surfactant systems containing either soybean phosphatidylcholine/poloxamer (PC/P-407) or phosphatidylcholine/Tween 60 (PC/T60), respectively. The carriers were characterized by nuclear magnetic resonance, differential scanning calorimetry, thermogravimetric analysis and Fourier transform-infrared spectroscopy. The safety profile was evaluated using red cell hemolysis and in vitro cytotoxicity assays. The results showed that the encapsulation of PZQ in NLC2 or NLC4 improved the safety profile of the drug. Treatment efficacy was evaluated on the S. mansoni BH strain. PZQ-NLC2 and PZQ-NLC4 demonstrated an improved efficacy in comparison with free PZQ. The results showed that the intestinal transport of free PZQ and PZQ-NLC2 was similar. However, we observed that the concentration of PZQ absorbed was smaller when PZQ was loaded in NLC4. The difference between the amounts of absorbed PZQ could indicate that the presence of T60 in the nanoparticles (NLC4) increased the rigid lipid matrix, prolonging release of the drug. Both systems showed considerable in vitro activity against S. mansoni, suggesting that these systems may be a promising platform for the administration of PZQ for treating schistosomiasis.

Nanomaterials-combined methacrylated gelatin hydrogels (GelMA) for cardiac tissue constructs.

Among non-communicable diseases, cardiovascular diseases are the most prevalent, accounting for approximately 17 million deaths per year. Despite conventional treatment, cardiac tissue engineering emerges as a potential alternative for the advancement and treatment of these patients, using biomaterials to replace or repair cardiac tissues. Among these materials, gelatin in its methacrylated form (GelMA) is a biodegradable and biocompatible polymer with adjustable biophysical properties. Furthermore, gelatin has the ability to replace and perform collagen-like functions for cell development in vitro. The interest in using GelMA hydrogels combined with nanomaterials is increasingly growing to promote the responsiveness to external stimuli and improve certain properties of these hydrogels by exploring the incorporation of nanomaterials into these hydrogels to serve as electrical signaling conductive elements. This review highlights the applications of electrically conductive nanomaterials associated with GelMA hydrogels for the development of structures for cardiac tissue engineering, by focusing on studies that report the combination of GelMA with nanomaterials, such as gold and carbon derivatives (carbon nanotubes and graphene), in addition to the possibility of applying these materials in 3D tissue engineering, developing new possibilities for cardiac studies.

Psidium guajava L. phenolic compound-reinforced lamellar scaffold for tracheal tissue engineering.

The aim of this work was to develop a dense lamellar scaffold, as a biomimetic material with potential applications in the regeneration of tracheal tissue after surgical tumor resection. The scaffolds were produced by plastic compression technique, exploiting the use of total phenolic compounds (TPC) from Psidium guajava Linn as a potential cross-linking agent in a polymeric mixture based on collagen (COL), silk fibroin (SF), and polyethylene glycol 400 (PEG 400). Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) confirmed the chemical interactions between the polymers and the cross-linking of TPC between COL and SF. Morphological analyses showed scaffolds with porosity, interconnectivity, and a porous surface structure with a gyroid-like geometry. The analysis of the anisotropic degree resulted in anisotropic structures (0.1% TFC and 0.3% TFC) and an isotropic structure (0.5% TFC). In the mechanical properties, it was evidenced greater resistance for the 0.3% TFC formulation. The addition of TPC percentages did not result in a significant difference (p > 0.05) in swelling capacity and disintegration rate. The results confirmed that TPC were able to modulate the morphological, morphometric, and mechanical properties of scaffolds. Thus, this study describes a potential new material to improve the regeneration of major tracheal structures after surgical tumor removal.

Chitosan membranes incorporating Aloe vera glycolic extract with joint synthesis of silver nanoparticles for the treatment of skin lesions.

New wound dressings based on polymeric membranes have been widely exploited for clinical applications to assist in the healing process and prevent additional complications (e.g., bacterial infections). Here we propose the development of a new production method of polymeric membranes based on chitosan, incorporating glycolic extract of Aloe vera with joint synthesis of silver nanoparticles for use as a new bioactive dressing. The membranes were obtained by casting technique, and their morphological, physicochemical characteristics, degree of swelling, degradation profile and antimicrobial activity evaluated. Morphological analyzes confirmed the synthesis and presence of silver nanoparticles in the polymeric membrane. The chemical compatibility between the materials was demonstrated through thermal analysis (TGA and DSC) combined with ATR-FTIR tests, showing the complexation of the membranes (Mb-Ch-Ex.Av-NPs). All membranes were characterized as hydrophilic material (with a contact angle (Ó©) < 90°); however, the highest degree of swelling was obtained for the chitosan. (Mb-Ch) membrane (69.91 ± 5.75%) and the lowest for Mb-Ch-Ex.Av-NPs (26.62 ± 8.93%). On the other hand, the degradation profile was higher for Mb-Ch-Ex.Av-NPs (77.85 ± 7.51%) and lower for Mb-Ch (57.60 ± 2.29%). The manufactured bioactive dressings showed activity against Escherichia coli and Staphylococcus aureus. Our work confirmed the development of translucent and flexible chitosan-based membranes, incorporating Aloe vera glycolic extract with joint synthesis of silver nanoparticles for use as a new bioactive dressing, with proven antimicrobial activity.

Nanotechnology-Based Dressings for Wound Management.

Wound healing is known to be a complicated and intricate process and commonly classified as chronic or acute. Patients with chronic wounds are of public health concern, and require more attention onto skin lesions, including atopic dermatitis. Despite being a natural process, healing can be impaired by existing chronic de diseases such as diabetes, for example. Recently, wound dressings based in nanotechnology systems have emerged as a viable option to improve the healing process. Current advances in nanotechnology-based systems to release growth factors and bioactive agents represent a great opportunity to develop new therapies for wound treatments. It is essential that healthcare professionals understand the key processes involved in the healing cascade, to maximize care with these patients and minimize the undesirable outcomes of non-healing wounds. Therefore, this review aims to summarize the healing process phases and provide a general overview of dressings based in nanotechnology using biomaterials for the release of active agents in wound site.

Physicochemical and biopharmaceutical aspects influencing skin permeation and role of SLN and NLC for skin drug delivery.

The skin is a complex and multifunctional organ, in which the static versus dynamic balance is responsible for its constant adaptation to variations in the external environment that is continuously exposed. One of the most important functions of the skin is its ability to act as a protective barrier, against the entry of foreign substances and against the excessive loss of endogenous material. Human skin imposes physical, chemical and biological limitations on all types of permeating agents that can cross the epithelial barrier. For a molecule to be passively permeated through the skin, it must have properties, such as dimensions, molecular weight, pKa and hydrophilic-lipophilic gradient, appropriate to the anatomy and physiology of the skin. These requirements have limited the number of commercially available products for dermal and transdermal administration of drugs. To understand the mechanisms involved in the drug permeation process through the skin, the approach should be multidisciplinary in order to overcome biological and pharmacotechnical barriers. The study of the mechanisms involved in the permeation process, and the ways to control it, can make this route of drug administration cease to be a constant promise and become a reality. In this work, we address the physicochemical and biopharmaceutical aspects encountered in the pathway of drugs through the skin, and the potential added value of using solid lipid nanoparticles (SLN) and nanostructured lipid vectors (NLC) to drug permeation/penetration through this route. The technology and architecture for obtaining lipid nanoparticles are described in detail, namely the composition, production methods and the ability to release pharmacologically active substances, as well as the application of these systems in the vectorization of various pharmacologically active substances for dermal and transdermal applications. The characteristics of these systems in terms of dermal application are addressed, such as biocompatibility, occlusion, hydration, emollience and the penetration of pharmacologically active substances. The advantages of using these systems over conventional formulations are described and explored from a pharmaceutical point of view.

Rutin-Functionalized Multi-Walled Carbon Nanotubes: Molecular Docking, Physicochemistry and Cytotoxicity in Fibroblasts.

Multi-Walled Carbon Nanotubes (MWCNT) have been functionalized with rutin through three steps (i. reaction step; ii. purification step; iii. drying step) and their physicochemical properties investigated with respect to morphological structure, thermal analysis, Fourier Transform Infrared Spectroscopy (FTIR), and cytotoxicity. The molecular docking suggested the rutin-functionalized MWCNT occurred by hydrogen bonds, which was confirmed by FTIR assays, corroborating the results obtained by thermal analyses. A tubular shape, arranged in a three-dimensional structure, could be observed. Mild cytotoxicity observed in 3T3 fibroblasts suggested a dose-effect relationship after exposure. These findings suggest the formation of aggregates of filamentous structures on the cells favoring the cell penetration.

Curcumin encapsulation in nanostructures for cancer therapy: A 10-year overview.

Curcumin (CUR) is a phenolic compound present in some herbs, including Curcuma longa Linn. (turmeric rhizome), with a high bioactive capacity and characteristic yellow color. It is mainly used as a spice, although it has been found that CUR has interesting pharmaceutical properties, acting as a natural antioxidant, anti-inflammatory, antimicrobial, and antitumoral agent. Nonetheless, CUR is a hydrophobic compound with low water solubility, poor chemical stability, and fast metabolism, limiting its use as a pharmacological compound. Smart drug delivery systems (DDS) have been used to overcome its low bioavailability and improve its stability. The current work overviews the literature from the past 10 years on the encapsulation of CUR in nanostructured systems, such as micelles, liposomes, niosomes, nanoemulsions, hydrogels, and nanocomplexes, emphasizing its use and ability in cancer therapy. The studies highlighted in this review have shown that these nanoformulations achieved higher solubility, improved tumor cytotoxicity, prolonged CUR release, and reduced side effects, among other interesting advantages.

Nanotoxicology and Nanosafety: Safety-By-Design and Testing at a Glance.

This review offers a systematic discussion about nanotoxicology and nanosafety associated with nanomaterials during manufacture and further biomedical applications. A detailed introduction on nanomaterials and their most frequently uses, followed by the critical risk aspects related to regulatory uses and commercialization, is provided. Moreover, the impact of nanotoxicology in research over the last decades is discussed, together with the currently available toxicological methods in cell cultures (in vitro) and in living organisms (in vivo). A special focus is given to inorganic nanoparticles such as titanium dioxide nanoparticles (TiO2NPs) and silver nanoparticles (AgNPs). In vitro and in vivo case studies for the selected nanoparticles are discussed. The final part of this work describes the significance of nano-security for both risk assessment and environmental nanosafety. "Safety-by-Design" is defined as a starting point consisting on the implementation of the principles of drug discovery and development. The concept "Safety-by-Design" appears to be a way to "ensure safety", but the superficiality and the lack of articulation with which it is treated still raises many doubts. Although the approach of "Safety-by-Design" to the principles of drug development has helped in the assessment of the toxicity of nanomaterials, a combination of scientific efforts is constantly urgent to ensure the consistency of methods and processes. This will ensure that the quality of nanomaterials is controlled and their safe development is promoted. Safety issues are considered strategies for discovering novel toxicological-related mechanisms still needed to be promoted.

Bilayer Mucoadhesive Buccal Film for Mucosal Ulcers Treatment: Development, Characterization, and Single Study Case.

The formation of mucosal ulcers is an end result of epithelial damage, and it occurs due to some specific causes, such as trauma, aphthous stomatitis, lichen planus and lichenoid reactions, cytotoxic effects of chemotherapy and radiation, and drug-induced hypersensitivity reactions and malignant settings. This study focused on films for target drug delivery with respect to the treatment of the diseases of the oral mucosa, specifically mucositis. The results of a single clinical study as a pre-experimental design was performed and followed up to the outcome until 30 days. The polymeric film was prepared in a mucoadhesive bilayer structure: the basal layer with lidocaine HCl had a faster release than the apical layer with benzydamine HCl and N-acetyl-cysteine. Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and SEM characterized the physical-chemical and morphological properties. The cell viability and cytotoxicity were evaluated in cell line MCF7. The transport mechanism of the solvent (swelling) and the drugs in the basal or apical layer (drug release) was explained with mathematical models. To evaluate the effect of movement inside the mouth, the folding endurance was determined. The mucoadhesive bilayer film is biologically safe and stimulates cellular proliferation. A single study in vivo demonstrated the therapeutic effect of the mucoadhesive bilayer film in buccal mucositis.

Nanopharmaceuticals for Eye Administration: Sterilization, Depyrogenation and Clinical Applications.

As an immune-privileged target organ, the eyes have important superficial and internal barriers, protecting them from physical and chemical damage from exogenous and/or endogenous origins that would cause injury to visual acuity or even vision loss. These anatomic, physiological and histologic barriers are thus a challenge for drug access and entry into the eye. Novel therapeutic concepts are highly desirable for eye treatment. The design of an efficient ocular drug delivery system still remains a challenge. Although nanotechnology may offer the ability to detect and treat eye diseases, successful treatment approaches are still in demand. The growing interest in nanopharmaceuticals offers the opportunity to improve ophthalmic treatments. Besides their size, which needs to be critically monitored, nanopharmaceuticals for ophthalmic applications have to be produced under sterilized conditions. In this work, we have revised the different sterilization and depyrogenation methods for ophthalmic nanopharmaceuticals with their merits and drawbacks. The paper also describes clinical sterilization of drugs and the outcomes of inappropriate practices, while recent applications of nanopharmaceuticals for ocular drug delivery are also addressed.

Hyaluronic acid behavior in oral administration and perspectives for nanotechnology-based formulations: A review.

Hyaluronic acid (HA) is a ubiquitous polysaccharide with diverse biological functions. Is known that in the intestinal epithelium, the exogenous HA of molar mass ≥105 Da orally administered antagonizes TLR4 overexpression resulting from dysbiosis and promotes immunomodulation in multifactorial crosstalk, thus helping to treat or to prevent injuries. As macromolecules mediate cell signaling, the three-dimensional structure of HA plays a vital role in those functions. Introducing HA in terms of its molecular structure, its spatial architecture as dependent on pH, concentration and molar mass, occurrence, biological functions and turnover in the tissues, this review addresses the HA in the gastrointestinal system, the molecular dynamics of intestinal uptake and signaling, immunomodulation at intestinal and systemic levels and HA fate to other tissues. Finally, at the light of these behaviors, a nanotechnological approach is presented as progress in the field of the oral HA administration and discussed with perspectives for future developments.

Alternative Cutaneous Substitutes Based on Poly(l-co-d,l-lactic acid-co-trimethylene carbonate) with Schinus terebinthifolius Raddi Extract Designed for Skin Healing.

The search for new therapies and drugs that act as topical agents to relieve pain and control the inflammatory processes in burns always attracted interest in clinical trials. As an alternative to synthetic drugs, natural extracts are useful in the development of new strategies and formulations for improving the quality of life. The aim of this study was to develop a wound dressing using poly(l-co-d,l-lactic acid-co-trimethylene carbonate) (PLDLA-TMC) containing Schinus terebinthifolius Raddi (S.T.R.). S.T.R. is a native Brazilian plant known for its strong anti-inflammatory responses. The membrane of PLDLA-TMC + S. terebinthifolius Raddi was prepared at different concentrations of S.T.R. (5, 10, 15, and 50%). The Fourier transform infrared results showed no change in the PLDLA-TMC spectrum after S.T.R. addition, whereas the swelling test showed changes only in PLDLA-TMC + S.T.R. at 50%. The wettability measurements showed a mass loss due to the decrease in the contact angle in all samples after the S.T.R. addition in the polymer, whereas the S.T.R. release test showed a linear delivery pattern. The scanning electron microscopy analysis showed that S.T.R. was homogeneously distributed at only 5 and 10%. Tensile tests demonstrated an increase in Young's modulus and a reduction in the elongation till rupture of PLDLA-TMC after the addition of S.T.R. The biocompatibility in vitro evaluation with rat fibroblast cells seeded in the membranes of PLDLA-TMC + S.T.R. showed that although S.T.R. interfered in cell morphology, all concentrations tested showed that cells were able to adhere and proliferate during 7 days. Thus, S.T.R. at 50% was chosen to be tested for in vivo trials. The histological and immunohistochemistry results revealed an accelerated skin healing at 7 days after controlled secondary burns were introduced in the dorsal skin, with a striking total recovery of the epidermis and high rates of molecular activation of cell proliferation. Due to the known biocompatibility properties of PLDLA-TMC and its stable release of S.T.R., we strongly recommend S.T.R.-containing PLDLA-TMC as a curative device to favor skin healing.