RESUMO
The logical range of laser power density and optimum laser power density were explored for multi-element analysis of pulverized coal flow with laser-induced breakdown spectroscopy in the present paper. The range of laser energy was chosen from 20 to 160 mJ in the experiment. Pulverized coal less than 200 microm in diameter of particles fell freely through feeder outlet and the rate of flow was controlled by screw feeder. Emissions were collected with pulse laser at 1 064 nm focusing on pulverized coal flow and plasma was generated. The intensity and cause of fluctuation of emission spectra at various laser energy levels were studied. A suitable range of laser power density is from 14.4 to 34.4 GW x cm(-2), and the optimum laser power density is 19.5 GW x cm(-2) for the determination of pulverized coal flow with LIBS.
RESUMO
In modern radiation therapy for lung cancer, examining the uncertainty between tumor motion and beam delivery is vitally important. To lower the radiation dose delivery to the patient's normal tissue, narrowing the irradiation field margin to hit the tumor accurately is critical. Thus we proposed a phantom that simulates the thorax and lung tumor's motions by employing a 3D printing technique. The lung tumor is controlled by a linear miniature Delta robot arm, with a maximum displacement of 20 mm in each direction. When we simulated the thoracic breathing movements at 12 mm in A-P (Anterior-Posterior), the control errors were within 10%. The average tracking errors of the prosthetic tumor were within 1.1 mm. Therefore, the 3D-printed phantom with a robot arm can provide a reliable simulation for training and dosimetry measurement before lung radiotherapy, especially SBRT.