Effect of isolation method on human corneal stromal cell behaviour.

Current research on healthy corneal stromal cells will typically use primary cells as they are the most representative of in vivo behaviour. Primary cells are normally isolated from the limbus of discarded donor peripheral corneal tissue left over from transplantation (due to its relative abundance). Therefore, the central part of the cornea is less used in research as this tissue is usually used for transplantation. In some cases, although rare, the whole cornea, can become available for research. It is important to keep in mind that these corneas often have longer storage time, but the use of the central tissue for research is even more interesting, as knowing what cells are being transplanted into recipients would be highly relevant. To this end, stromal cells were extracted from both the limbus and central button of healthy corneas donated for research. This allowed for important comparison between central and limbal cells in culture. Of interest here was the extraction method of stromal cells from the donor tissue. The two most common methods of extraction are enzyme digestion and explant migration. However, no work has been done to understand how each method relatively affects the extracted cells. The extraction method and location from which stromal cells are harvested seems to have a significant effect on the cell adherence, survival, and gene expression of the stromal cells in culture. Enzyme digested cells showed that limbal and central cells had different gene expressions prior to culture, with gene such as ALDH3A1 being much more expressed in limbal cells. Enzyme digesting the limbal ring seems to yield the hardiest populations of stromal cells, a desirable trait in the culture of primary cells.

Hypothermically Stored Adipose-Derived Mesenchymal Stromal Cell Alginate Bandages Facilitate Use of Paracrine Molecules for Corneal Wound Healing.

Adipose-derived mesenchymal stromal cells (Ad-MSCs) may alleviate corneal injury through the secretion of therapeutic factors delivered at the injury site. We aimed to investigate the therapeutic factors secreted from hypothermically stored, alginate-encapsulated Ad-MSCs' bandages in in vitro and in vivo corneal wounds. Ad-MSCs were encapsulated in 1.2% w/v alginate gels to form bandages and stored at 15 °C for 72 h before assessing cell viability and co-culture with corneal scratch wounds. Genes of interest, including HGF, TSG-6, and IGF were identified by qPCR and a human cytokine array kit used to profile the therapeutic factors secreted. In vivo, bandages were applied to adult male mice corneas following epithelial debridement. Bandages were shown to maintain Ad-MSCs viability during storage and able to indirectly improve corneal wound healing in vivo. Soluble protein concentration and paracrine factors such as TSG-6, HGF, IL-8, and MCP-1 release were greatest following hypothermic storage. In vivo, Ad-MSCs bandages-treated groups reduced immune cell infiltration when compared to untreated groups. In conclusion, bandages were shown to maintain Ad-MSCs ability to produce a cocktail of key therapeutic factors following storage and that these soluble factors can improve in vitro and in vivo corneal wound healing.

3D bioprinting of a corneal stroma equivalent.

Corneal transplantation constitutes one of the leading treatments for severe cases of loss of corneal function. Due to its limitations, a concerted effort has been made by tissue engineers to produce functional, synthetic corneal prostheses as an alternative recourse. However, successful translation of these therapies into the clinic has not yet been accomplished. 3D bioprinting is an emerging technology that can be harnessed for the fabrication of biological tissue for clinical applications. We applied this to the area of corneal tissue engineering in order to fabricate corneal structures that resembled the structure of the native human corneal stroma using an existing 3D digital human corneal model and a suitable support structure. These were 3D bioprinted from an in-house collagen-based bio-ink containing encapsulated corneal keratocytes. Keratocytes exhibited high cell viability both at day 1 post-printing (>90%) and at day 7 (83%). We established 3D bio-printing to be a feasible method by which artificial corneal structures can be engineered.

Assessing corneal biomechanics with Brillouin spectro-microscopy.

A new Brillouin spectro-microscope was designed and built to investigate the mechanical properties of bovine and human corneas. This instrument integrates a single-stage virtually imaged phased array spectrometer with a novel adaptive-optics interferometric filter to achieve unprecedented rejection of the elastic background signal. As a result, highly-resolved, reproducible data from both thin and thick collagen-based materials were obtained. In particular, this technique is capable of rigorously measuring the relative stiffness of different areas of human corneas, thus providing a true non-contact method to characterise the fundamental mechanical features of both live and fixed biological tissue samples.

Self-Assembly and Collagen-Stimulating Activity of a Peptide Amphiphile Incorporating a Peptide Sequence from Lumican.

The self-assembly and bioactivity of a peptide amphiphile (PA) incorporating a 13-residue sequence derived from the last 13 amino acids of the C-terminus of lumican, C16-YEALRVANEVTLN, attached to a hexadecyl (C16) lipid chain have been examined. Lumican is a proteoglycan found in many types of tissue and is involved in collagen fibril organization. A critical aggregation concentration (cac) for the PA was determined through pyrene fluorescence measurements. The structure of the aggregates was imaged using electron microscopy, and twisted and curved nanotapes were observed. In situ small-angle X-ray scattering and fiber X-ray diffraction reveal that these tapes contain interdigitated bilayers of the PA molecules. FTIR and circular dichroism spectroscopy and fiber X-ray diffraction indicate that the lumican sequence in the PA adopts a ß-sheet secondary structure. Cell assays using human dermal fibroblasts show that below the cac the PA displays good biocompatibility and also stimulates collagen production over a period of 3 weeks, exceeding a 2-fold enhancement for several concentrations. Thus, this PA has promise in future biological applications, in particular, in tissue engineering.

Self-assembly of a dual functional bioactive peptide amphiphile incorporating both matrix metalloprotease substrate and cell adhesion motifs.

We describe a bioactive lipopeptide that combines the capacity to promote the adhesion and subsequent self-detachment of live cells, using template-cell-environment feedback interactions. This self-assembling peptide amphiphile comprises a diene-containing hexadecyl lipid chain (C16e) linked to a matrix metalloprotease-cleavable sequence, Thr-Pro-Gly-Pro-Gln-Gly-Ile-Ala-Gly-Gln, and contiguous with a cell-attachment and signalling motif, Arg-Gly-Asp-Ser. Biophysical characterisation revealed that the PA self-assembles into 3 nm diameter spherical micelles above a critical aggregation concentration (cac). In addition, when used in solution at 5-150 nM (well below the cac), the PA is capable of forming film coatings that provide a stable surface for human corneal fibroblasts to attach and grow. Furthermore, these coatings were demonstrated to be sensitive to metalloproteases expressed endogenously by the attached cells, and consequently to elicit the controlled detachment of cells without compromising their viability. As such, this material constitutes a novel class of multi-functional coating for both fundamental and clinical applications in tissue engineering.

Bio-fabrication and physiological self-release of tissue equivalents using smart peptide amphiphile templates.

In this study we applied a smart biomaterial formed from a self-assembling, multi-functional synthetic peptide amphiphile (PA) to coat substrates with various surface chemistries. The combination of PA coating and alignment-inducing functionalised substrates provided a template to instruct human corneal stromal fibroblasts to adhere, become aligned and then bio-fabricate a highly-ordered, multi-layered, three-dimensional tissue by depositing an aligned, native-like extracellular matrix. The newly-formed corneal tissue equivalent was subsequently able to eliminate the adhesive properties of the template and govern its own complete release via the action of endogenous proteases. Tissues recovered through this method were structurally stable, easily handled, and carrier-free. Furthermore, topographical and mechanical analysis by atomic force microscopy showed that tissue equivalents formed on the alignment-inducing PA template had highly-ordered, compact collagen deposition, with a two-fold higher elastic modulus compared to the less compact tissues produced on the non-alignment template, the PA-coated glass. We suggest that this technology represents a new paradigm in tissue engineering and regenerative medicine, whereby all processes for the bio-fabrication and subsequent self-release of natural, bio-prosthetic human tissues depend solely on simple template-tissue feedback interactions.

Differential nuclear expression of Yap in basal epithelial cells across the cornea and substrates of differing stiffness.

Corneal epithelium is maintained throughout life by well-orchestrated proliferation of limbal epithelial stem cells, followed by migration and maturation centripetally across the ocular surface. The present study sets out to explore the role tissue stiffness (compliance) may have in directing both differentiation and centripetal migration of limbal epithelial stem cells during homeostasis. For that, we analysed the localization of the Yes-associated protein (Yap), a transcriptional co-activator previously shown to mediate cellular response and mechanical stimuli. Using both models of ocular surface compliance and normal bovine corneas we evaluated the nuclear/cytoplasmic expression ratio of Yap. Expression levels within corneal epithelial cells were compared in situ between the limbus and central cornea, and in vitro between limbal epithelial stem cells expanded upon biomimetic collagen gels of increasing stiffness. Nuclear expression of Yap was shown to increase within the expanded cells upon substrates of increasing stiffness. Subsequently, Yap was used as a novel molecular probe to investigate the mechanical microenvironment within a normal ocular surface. The in situ localization of Yap was predominantly cytoplasmic within basal limbal epithelial cells and nuclear within basal central corneal epithelial cells. Furthermore, nuclear p63 expression was not co-localized with Yap in basal limbal epithelial cells. In conclusion, the current investigation provides new insights into the relationship between Yap and distinct cell populations across the ocular surface indicating that cells experience a different mechanical environment between the limbus and central cornea. A new hypothesis is put forward, in which centripetal differences in substrate stiffness drives the migration and differentiation of limbal epithelial stem cells, thus controlling corneal epithelium homeostasis.

Cyclodextrin-mediated enhancement of riboflavin solubility and corneal permeability.

Cyclodextrins are water-soluble cyclic oligosaccharides consisting of six, seven, and eight α-(1,4)-linked glucopyranose subunits. This study reports the use of different cyclodextrins in eye drop formulations to improve the aqueous solubility and corneal permeability of riboflavin. Riboflavin is a poorly soluble drug with a solubility up to 0.08 mg mL(-1) in deionized water. It is used as a drug topically administered to the eye to mediate UV-induced corneal cross-linking in the treatment of keratoconus. Aqueous solutions of ß-cyclodextrin (10-30 mg mL(-1)) can enhance the solubility of riboflavin up to 0.12-0.19 mg mL(-1), whereas the higher concentration of α-cyclodextrin (100 mg mL(-1)) achieved a lower level of enhancement of 0.11 mg mL(-1). The other oligosaccharides were found to be inefficient for this purpose. In vitro diffusion experiments performed with fresh and cryopreserved bovine cornea have demonstrated that ß-cyclodextrin enhances riboflavin permeability. The mechanism of this enhancement was examined through microscopic histological analysis of the cornea and is discussed in this paper.

Collagen stimulating effect of peptide amphiphile C16-KTTKS on human fibroblasts.

The collagen production of human dermal and corneal fibroblasts in contact with solutions of the peptide amphiphile (PA) C16-KTTKS is investigated and related to its self-assembly into nanotape structures. This PA is used in antiwrinkle cosmeceutical applications (trade name Matrixyl). We prove that C16-KTTKS stimulates collagen production in a concentration-dependent manner close to the critical aggregation concentration determined from pyrene fluorescence spectroscopy. This suggests that self-assembly and the stimulation of collagen production are inter-related.

Storable Cell-Laden Alginate Based Bioinks for 3D Biofabrication.

Over the last decade, progress in three dimensional (3D) bioprinting has advanced considerably. The ability to fabricate complex 3D structures containing live cells for drug discovery and tissue engineering has huge potential. To realise successful clinical translation, biologistics need to be considered. Refinements in the storage and transportation process from sites of manufacture to the clinic will enhance the success of future clinical translation. One of the most important components for successful 3D printing is the 'bioink', the cell-laden biomaterial used to create the printed structure. Hydrogels are favoured bioinks used in extrusion-based bioprinting. Alginate, a natural biopolymer, has been widely used due to its biocompatibility, tunable properties, rapid gelation, low cost, and easy modification to direct cell behaviour. Alginate has previously demonstrated the ability to preserve cell viability and function during controlled room temperature (CRT) storage and shipment. The novelty of this research lies in the development of a simple and cost-effective hermetic system whereby alginate-encapsulated cells can be stored at CRT before being reformulated into an extrudable bioink for on-demand 3D bioprinting of cell-laden constructs. To our knowledge the use of the same biomaterial (alginate) for storage and on-demand 3D bio-printing of cells has not been previously investigated. A straightforward four-step process was used where crosslinked alginate containing human adipose-derived stem cells was stored at CRT before degelation and subsequent mixing with a second alginate. The printability of the resulting bioink, using an extrusion-based bioprinter, was found to be dependent upon the concentration of the second alginate, with 4 and 5% (w/v) being optimal. Following storage at 15 °C for one week, alginate-encapsulated human adipose-derived stem cells exhibited a high viable cell recovery of 88 ± 18%. Stored cells subsequently printed within 3D lattice constructs, exhibited excellent post-print viability and even distribution. This represents a simple, adaptable method by which room temperature storage and biofabrication can be integrated for on-demand bioprinting.

Alginate in corneal tissue engineering.

Corneal blindness is the major cause of vision impairment and the fourth-largest leading cause of blindness worldwide. An allograft corneal transplant is the most routine treatment for visual loss. Further complications can occur, such as transplant rejection, astigmatism, glaucoma, uveitis, retinal detachment, corneal ulceration due to reopening of the surgical wounds, and infection. For patients with autoimmune disorders, allografting for chemical burns and infections is contraindicated because of the risk of disease transmission and further complications. Moreover, corrective eye surgery renders the corneas unsuitable for allografting, further increasing the gap between donor tissue demand and supply. Due to these challenges, other therapeutic strategies such as artificial alternatives to donor corneal tissue are being considered. This review focuses on the use of alginate as a building block of therapeutic drugs or cell delivery systems to enhance drug retention and encourage corneal regeneration. The similarity of alginate hydrogel water content to native corneal tissue makes it a promising support structure. Alginate possess desired drug carrier characteristics, such as mucoadhesiveness and penetration enhancing properties. Whilst alginates have been extensively studied for their application in tissue engineering (TE), with many reviews being published, no reviews exist to our knowledge directly looking at alginates for corneal applications. The role of alginate in drug delivery to the surface of the eye and as a support structure (bioinspired tissue scaffold) for corneal TE is discussed. Biofabrication techniques such as gel casting, electrospinning, and bioprinting to develop tissue precursors and substitutes are compared. Finally, cell and tissue encapsulation in alginate for storage and transport to expand the scope of cell-based therapy for corneal blindness is also discussed in the light of recent applications of alginate in maintaining the function of biofabricated constructs for storage and transport.

Milliscale Substrate Curvature Promotes Myoblast Self-Organization and Differentiation.

Biological tissues comprise complex structural environments known to influence cell behavior via multiple interdependent sensing and transduction mechanisms. Yet, and despite the predominantly nonplanar geometry of these environments, the impact of tissue-size (milliscale) curvature on cell behavior is largely overlooked or underestimated. This study explores how concave, hemicylinder-shaped surfaces 3-50 mm in diameter affect the migration, proliferation, orientation, and differentiation of C2C12 myoblasts. Notably, these milliscale cues significantly affect cell responses compared with planar substrates, with myoblasts grown on surfaces 7.5-15 mm in diameter showing prevalent migration and alignment parallel to the curvature axis. Moreover, surfaces within this curvature range promote myoblast differentiation and the formation of denser, more compact tissues comprising highly oriented multinucleated myotubes. Based on the similarity of effects, it is further proposed that myoblast susceptibility to substrate curvature depends on mechanotransduction signaling. This model thus supports the notion that cellular responses to substrate curvature and compliance share the same molecular pathways and that control of cell behavior can be achieved via modulation of either individual parameter or in combination. This correlation is relevant for elucidating how muscle tissue forms and heals, as well as for designing better biomaterials and more appropriate cell-surface interfaces.

Use of biomaterials in corneal endothelial repair.

Human corneal endothelium (HCE) is a single layer of hexagonal cells that lines the posterior surface of the cornea. It forms the barrier that separates the aqueous humor from the rest of the corneal layers (stroma and epithelium layer). This layer plays a fundamental role in maintaining the hydration and transparency of the cornea, which in turn ensures a clear vision. In vivo, human corneal endothelial cells (HCECs) are generally believed to be nonproliferating. In many cases, due to their nonproliferative nature, any damage to these cells can lead to further issues with Descemet's membrane (DM), stroma and epithelium which may ultimately lead to hazy vision and blindness. Endothelial keratoplasties such as Descemet's stripping automated endothelial keratoplasty (DSAEK) and Descemet's membrane endothelial keratoplasty (DEK) are the standard surgeries routinely used to restore vision following endothelial failure. Basically, these two similar surgical techniques involve the replacement of the diseased endothelial layer in the center of the cornea by a healthy layer taken from a donor cornea. Globally, eye banks are facing an increased demand to provide corneas that have suitable features for transplantation. Consequently, it can be stated that there is a significant shortage of corneal grafting tissue; for every 70 corneas required, only 1 is available. Nowadays, eye banks face long waiting lists due to shortage of donors, seriously aggravated when compared with previous years, due to the global COVID-19 pandemic. Thus, there is an urgent need to find alternative and more sustainable sources for treating endothelial diseases, such as utilizing bioengineering to use of biomaterials as a remedy. The current review focuses on the use of biomaterials to repair the corneal endothelium. A range of biomaterials have been considered based on their promising results and outstanding features, including previous studies and their key findings in the context of each biomaterial.

Biomechanical Modulation Therapy-A Stem Cell Therapy Without Stem Cells for the Treatment of Severe Ocular Burns.

Ocular injuries caused by chemical and thermal burns are often unmanageable and frequently result in disfigurement, corneal haze/opacification, and vision loss. Currently, a considerable number of surgical and pharmacological approaches are available to treat such injuries at either an acute or a chronic stage. However, these existing interventions are mainly directed at (and limited to) suppressing corneal inflammation and neovascularization while promoting re-epithelialization. Reconstruction of the ocular surface represents a suitable but last-option recourse in cases where epithelial healing is severely impaired, such as due to limbal stem cell deficiency. In this concise review, we discuss how biomechanical modulation therapy (BMT) may represent a more effective approach to promoting the regeneration of ocular tissues affected by burn injuries via restoration of the limbal stem cell niche. Specifically, the scientific basis supporting this new therapeutic modality is described, along with our growing understanding of the role that tissue biomechanics plays in stem cell fate and function. The potential impact of BMT as a future treatment option for the management of injuries affecting tissue compliance is also further discussed.

Keratoconus at a Molecular Level: A Review.

Keratoconus is the most common ectatic disease of the cornea. The disease is usually detected between ages 15 and 25. Incidence is estimated at one out of every 2000 individuals, with some specific ethnic groups being more at risk. Keratoconus manifests itself as a progressive stromal thinning and deformation of the corneal tissue into a conical shape. The etiology of keratoconus is uncertain, although several studies have associated the disease to environmental factors, behavioral conditions and certain genetic disorders. In an effort to better understand how the corneal stroma becomes compromised, multiple experiments have been conducted over the last few years looking at the cells themselves and the factors they produce. The secretion pathways and levels of inflammatory molecules, growth factors, digestive enzymes, and apoptotic factors are all relevant to keratoconus. This review describes the current knowledge of keratoconic pathological signaling pathways within the cornea that may help future developments in disease prevention, treatment and modeling. Anat Rec, 2019. © 2019 Wiley Periodicals, Inc.

Scale-Up Technologies for the Manufacture of Adherent Cells.

Great importance is being given to the impact our food supply chain and consumers' food habits are having on the environment, human health, and animal welfare. One of the latest developments aiming at positively changing the food ecosystem is represented by cultured meat. This form of cellular agriculture has the objective to generate slaughter-free meat products starting from the cultivation of few cells harvested from the animal tissue of interest. As a consequence, a large number of cells has to be generated at a reasonable cost. Just to give an idea of the scale, there were billions of cells just in a bite of the first cultured-meat burger. Thus, one of the major challenges faced by the scientists involved in this new ambitious and fascinating field, is how to efficiently scale-up cell manufacture. Considering the great potential presented by cultured meat, audiences from different backgrounds are very interested in this topic and eager to be informed of the challenges and possible solutions in this area. In light of this, we will provide an overview of the main existing bioprocessing technologies used to scale-up adherent cells at a small and large scale. Thus, giving a brief technical description of these bioprocesses, with the main associated advantages and disadvantages. Moreover, we will introduce an alternative solution we believe has the potential to revolutionize the way adherent cells are grown, helping cultured meat become a reality.

Response of human oral mucosal epithelial cells to different storage temperatures: A structural and transcriptional study.

PURPOSE: Seeking to improve the access to regenerative medicine, this study investigated the structural and transcriptional effects of storage temperature on human oral mucosal epithelial cells (OMECs). METHODS: Cells were stored at four different temperatures (4°C, 12°C, 24°C and 37°C) for two weeks. Then, the morphology, cell viability and differential gene expression were examined using light and scanning electron microscopy, trypan blue exclusion test and TaqMan gene expression array cards, respectively. RESULTS: Cells stored at 4°C had the most similar morphology to non-stored controls with the highest viability rate (58%), whereas the 37°C group was most dissimilar with no living cells. The genes involved in stress-induced growth arrest (GADD45B) and cell proliferation inhibition (TGFB2) were upregulated at 12°C and 24°C. Upregulation was also observed in multifunctional genes responsible for morphology, growth, adhesion and motility such as EFEMP1 (12°C) and EPHA4 (4°C-24°C). Among genes used as differentiation markers, PPARA and TP53 (along with its associated gene CDKN1A) were downregulated in all temperature conditions, whereas KRT1 and KRT10 were either unchanged (4°C) or downregulated (24°C and 12°C; and 24°C, respectively), except for upregulation at 12°C for KRT1. CONCLUSIONS: Cells stored at 12°C and 24°C were stressed, although the expression levels of some adhesion-, growth- and apoptosis-related genes were favourable. Collectively, this study suggests that 4°C is the optimal storage temperature for maintenance of structure, viability and function of OMECs after two weeks.

Autogenous Biofabrication of Nativelike, Scaffold-Free Human Skin Equivalents Using a Smart, Enzyme-Degradable Tissue Templating Coating.

In this study, we used tissue templating technology to direct human dermal fibroblasts to biofabricate large-area tissues that closely emulate the natural dermis. This technology also allowed the new tissues to promote their own release from the template surface, thus facilitating their recovery as self-sustained, scaffold-free dermal equivalents solely comprising human cells and their own extracellular matrix. The structure and composition of these dermal self-lifting autogenous tissue equivalents (SLATEs) were evaluated in detail and were shown to closely correlate to normal tissue function. Specifically, dermal SLATEs were shown to be composed of a dense collagen-based matrix interwoven with dermal-characteristic elastic fibers. In addition, the mechanical properties of these tissues (i.e., robustness, elastic modulus, and resistance to contraction and enzymatic degradation) were comparable to those of the natural human dermis. Furthermore, dermal SLATEs were capable of constituting tissues with a higher-order complexity by serving as a substrate to support the growth of keratinocytes into stratified epithelia with distinct layers of differentiation. This work thus illustrates the great potential of tissue templating technologies and how these can pave the way for the biofabrication of easily retrievable, scaffold-free human skin tissues with a structure, composition, and function suitable for both clinical and nonclinical applications.

Mesenchymal stromal cells for ocular surface repair.

INTRODUCTION: Cornea is a transparent, robust tissue that comprises highly organized cells. Disruption of this specialized tissue can lead to scarring and subsequent blindness, making corneal damage a considerable challenge worldwide. At present, the available medical treatments are unable to address the wide range of corneal diseases. Mesenchymal stem cells (MSCs) have increasingly been investigated for their regenerative effect on ocular surface injury due to their unique ability for growth factor production, anti-inflammatory activity, immunomodulatory capacity and differentiation into multiple cell lineages. AREAS COVERED: Within this review, we explore the pathogenesis of corneal disorders in response to injury and disease, and the potential for MSCs to modulate this process as a treatment. Through the review of over 25 animal studies, we investigate the common mechanisms of action by which MSCs have their effect and discuss their potential for treating and/or preventing corneal deterioration EXPERT OPINION: Depending on the environmental cues, MSCs can exert a potent effect on corneal wound healing through reducing opacity and vascularization, whilst promoting re-epithelialization. Whilst their mechanism is multifactorial, it seems clear that the anti-inflammatory/immunomodulatory factors they produce in response to damage are key to their control of cellular milieu and improving healing outcomes.