RESUMO
Janus structure plays a crucial role in achieving chemically driven nanomotors with exceptional motion performance. However, Janus-structured chemically driven nanomotors with magnetic responsiveness are commonly fabricated by sputtering metal films. In the study, a self-assembly technique is employed to asymmetrically modify the surfaces of magnetic silica (SiO2@Fe3O4) nanoparticles with platinum nanoparticles, resulting in the formation of this kind nanomotors. Compared to platinum film, platinum nanoparticles exhibit a larger surface area and a higher catalytic activity. Hence, the nanomotors demonstrate improved diffusion capabilities at a significantly lower concentration (0.05%) of hydrogen peroxide (H2O2). Meanwhile, exosomes have gained attention as a potential tool for the efficient delivery of biological therapeutic drugs due to their biocompatibility. However, the clinical applications of exosomes are limited by their restricted tropism. The previously obtained nanomotors are utilized to deliver exosomes, greatly enhancing its targetability. The drug doxorubicin (DOX) is subsequently encapsulated within exosomes, acting as a representative drug model. Under the conditions of H2O2 concentration at the tumor site, the exosomes exhibited a significantly enhanced rate of entry into the breast cancer cells. The utilization of the nanomotors for exosomes presents a novel approach in the development of hybrid chemically and magnetically responsive nanomotors.
RESUMO
The integrated optical delay line plays a crucial role in microwave photonic chips. Continuous tunability is a growing trend in filtering and beamforming techniques of microwave photonics. Based on the silicon platform, we present and experimentally demonstrate an integrated continuously optical tunable delay line (OTDL) chip, which contains a 4-bit optical switched delay line (OSDL) and a thermally tunable delay line based on grating-assisted Contradirectional coupler (CDC). The OSDL can achieve stepwise optical delays, while the CDC is introduced to improve delay tuning resolution within one step delay of the OSDL. The combination of the two modules can realize tuning delays from 0 to 160 ps. Additionally, it is easy to increase the maximum delay by cascading more optical switches. The experimental results demonstrate that the proposed OTDL shows outstanding performance and good expansibility.
RESUMO
The silicon thermo-optic switch (TOS) is one of the most fundamental and crucial blocks in large-scale silicon photonic integrated circuits (PICs). An energy-efficient silicon TOS with ultrahigh extinction ratio can effectively mitigate cross talk and reduce power consumption in optical systems. In this Letter, we demonstrate a silicon TOS based on cascading Mach-Zehnder interferometers (MZIs) with spiral thermo-optic phase shifters. The experimental results show that an ultrahigh extinction ratio of 58.8â dB is obtained, and the switching power consumption is as low as 2.32â mW/π without silicon air trench. The rise time and fall time of the silicon TOS are about 10.8 and 11.2â µs, respectively. Particularly, the figure of merit (FOM) has been improved compared with previously reported silicon TOS. The proposed silicon TOS may find potential applications in optical switch arrays, on-chip optical delay lines, etc.
RESUMO
We propose a low loss, wideband silicon transverse magnetic (TM) polarizer with high polarization extinction ratio and low reflection based on subwavelength grating. By arranging and optimizing a mutually perpendicular subwavelength grating with different duty cycles as the core and cladding, efficient waveguiding and radiation can be achieved for the TM and transverse electric (TE) injection, respectively. In simulation, the proposed TM polarizer has a footprint of 40µm×16.68µm, an insertion loss <0.7d B, a polarization extinction ratio ≥20d B, and an unwanted TE reflection <-17.4d B in the wavelength range of 1230-1700 nm. Moreover, the fabrication tolerance of the proposed device is also investigated.
RESUMO
Guava (Psidium guajava L.), a nutrient-rich and economically significant fruit, is extensively cultivated in southern China. In six continuous years (from 2018 to 2023), dark-purple rotted guava with sunken lesion were observed on guava trees (variety 'Zhenzhu', aged over 5 years) in Dongguan and Panyu districts, Guangdong Province. Annually, the incidence of fruit rot disease in the affected fields reached 30% to 50% and significantly reduced the yield and quality of harvest guava. The initial symptoms on the epicarp of the fruits were black, needle-like dots that rapidly spread, causing partial or complete fruit rot within two to three weeks. To identify the causative agent, six symptomatic fruits were collected from two different orchards. Samples of 0.5 cm³ were excised from the lesion margins of each fruit. These samples were surface-sterilized with 70% ethanol for 30 seconds, followed by 0.2% NaClO for 2-3 minutes, and rinsed in sterile water three times. The samples were then cultured on potato dextrose agar (PDA) at 25°C for five days. This process yielded eight fungal isolates with similar morphological. Initially, the colonies were white with dense aerial mycelium becoming dark gray after 4 to 5 days. The mycelia were septate and branched. No spores were observed on PDA. To induce spore formation, the isolates were cultured on water agar for 20 days. This process led to the production of hyaline, aseptate, ellipsoid conidia, which were thin-walled, smooth-surfaced, and measured 3.7-5.1 × 1.6-2.2 µm (n = 100). Three isolates, including at least one from each orchard (Np1, Np2, Np3), were selected for further analysis. Genomic DNA was extracted using Axygen MAG-FRAG-I-50 (Axygen Bio-Tek). The internal transcribed spacer of rDNAs (ITS), beta-tubulin (tub2), the nuclear ribosomal large subunit (LSU), and translation elongation factor 1-α (tef1-α) gene regions were amplified using the primers ITS1/4, Bt2a/Bt2b, LR5/LR0R, and EF1-728F/EF1-986R (Golzar and Burgess 2011) and sequenced. Sequence analysis using MEGA 7.0 (Kumar et al., 2018) revealed 100% similarity among the isolates. BLAST searches of the ITS, tub2, LSU, and tef1-α sequences (accession nos. MN907637, MT537938, MT528156, MT537939) showed the highest nucleotide similarities (99.24 to 100%) to Neofusicoccum parvum strains (Crous et al. 2006). A phylogenetic tree was constructed with MEGA 7.0 based on the nucleotide sequence tub2 using the maximum likelihood method. Pathogenicity tests on 10 healthy guava fruits using mycelium-inoculated and control fruits confirmed the causative agent. The inoculated fruits, maintained at 25°C under a 12-h light/dark cycle, exhibited symptoms identical to the field infections within four to seven days, while control fruits remained symptomless. The fungus, reisolated from the inoculated fruits, was morphologically identical to the original isolates, fulfilling Koch's postulates. In conclusion, based on molecular, morphological, and pathogenic analysis, N. parvum as the causal agent of the fruit rot disease on guava. Previously, N. parvum has been reported in association with fruit rot on Eriobotrya japonica and Juglans regia (Zhai et al. 2019; Chen et al. 2019). To our knowledge, this is the first report of N. parvum affecting guava in China.
RESUMO
Coptis (Coptis chinensis) belongs to the Ranunculaceae family, the rhizomes used in traditional Chinese medicine. Since 2021, an uncommon stem and leaf wilt disease, with an average disease incidence of 70%~90%, has been observed in Guangdong and Guangxi provinces. The early wilt symptoms were observed on older leaves and stems, and the whole seedling wilted and died. The rhizome of the diseased seedlings changed in color, became necrotic, and rotted. Symptomatic roots and stems were surface-sterilized with 70% ethanol for 30 s, followed by 0.2% NaClO for 2-3 min, rinsed in sterile water three times, and then placed on potato dextrose agar (PDA) at 25âfor 14 days. Fungal growth was observed, and six isolates with similar morphology were obtained. The 14-day-old colonies on PDA were buff with few aerial hyphae and slimy surfaces. Aerial hyphae were sparse with simple or branched conidiophores. Conidia were hyaline, smooth, ovoid, septate or aseptate, and 5.77 to 9.53 × 2.15 to 3.32 µm (n = 50). Three of the six isolates were subjected to further analysis. The genomic DNA of three isolates (CCF1-1, CCF1-2, CCF1-3) was extracted using Axygen MAG-FRAG- I-50 (Axygen Bio-Tek) for molecular identification. Partial sequences of the internal transcribed spacer of rDNA (ITS) and large subunit rDNA (LSU) were amplified using the primers ITS1/4 and LR5F/LROR, respectively (Vilgalys and Hester 1990). Their sequences were aligned by MEGA X (Kumar et al., 2018), and the sequences of each region showed 100% sequence similarity among our isolates. A BLAST search of ITS and LSU sequences (accession nos. ON377369, ON428244) showed that both regions had the highest nucleotide similarities (99.43 to 99.89%) to the Plectosphaerella cucumerina strains. Based on morphological and molecular analyses, the isolates were identified as P. cucumerina (Palm et al. 1995). The pathogenicity of our isolates CCF1-1, CCF1-2, CCF1-3 was tested on ten 2-month-old healthy seedlings of coptis, respectively. For the seedlings, 30 ml of fungal conidial suspension (1×106 conidia/ml) or sterile water, as control, were poured into their root area. Conidia suspension were prepared from 14-day-old cultures on PDA by eluting with sterilized water. The seedlings were incubated at 25°C and 75% relative humidity under a 12-h/12-h light/dark cycle. The test was repeated three times. After 20 days, only seedlings inoculated with P. cucumerina exhibited symptoms similar to those diseased seedlings in the field. The control seedling had no symptoms. The morphologically similar fungus was re-isolated from the tested seedlings, thus fulfilling Koch's postulates. Based on molecular, morphological, and pathogenic properties, P. cucumerina is the causal fungal pathogen of coptis wilt disease. Previously, P. cucumerina has been related to wilt disease in strawberry and Chinese cabbage (Yang et al. 2023; Gao et al. 2022), but to our knowledge, this is the first report of P. cucumerina causing wilt disease on coptis in China. Coptis wilt disease tends to occur in a warm and rainy environment, and strengthening the detection and quarantine of seedlings is the key to preventing the occurrence and spread of the disease.
RESUMO
We propose and experimentally demonstrate a scheme for the photonic generation of pulsed microwave signals with selectable frequency based on spectral shaping and wavelength-to-time mapping (WTTM) technique. The frequency selectivity is realized by channel switching on an integrated silicon-on-insulator (SOI) spectral shaping chip. The incident signal is spectrally shaped by the asymmetric Mach-Zehnder interferometer (MZI) in the selected channel, and an optical spectrum with uniform free spectral range (FSR) can be generated in a broad bandwidth up to dozens of nanometers, implying large microwave signal duration after WTTM if a pulse light source with matched bandwidth is available. Microwave pulses of frequency from 3.6â GHz to 28.4â GHz with a fixed interval are experimentally generated respectively. The realization of eight microwave frequencies selectable with only one shared dispersive element (DE) required indicates high expansibility in the frequency cover range of our scheme by tuning the dispersion value in WTTM.
RESUMO
Ag+ ions are widely used in various fields of human life due to their unique properties and they threaten the environment and human health. The traditional methods for Ag+ detection commonly suffer from disadvantages including limited sensitivity, expensive equipment and complicated operating steps. Herein, we developed a highly specific dual-color fluorescence co-localization (DFC) strategy based on the C-Ag+-C structure for Ag+ detection. In this strategy, Ag+ ions can be captured to form C-Ag+-C base pairs, and these ions enable single-stranded DNAs to form double strands. The DFC strategy can exclude nonspecific interaction sites and greatly improve the sensitivity and specificity. By DFC of the QDs and Cy5 linked to the DNA strands, highly sensitive Ag+ detection was achieved in the concentration range from 0.14 pM to 200 nM, with a limit of detection (LOD) of 0.14 pM. Moreover, this method has been applied for the detection of Ag+ ions in real environmental samples with satisfactory recoveries. We believe that the DFC strategy is promising for Ag+ detection.
Assuntos
DNA de Cadeia Simples , Prata , Humanos , Prata/química , DNA/química , Limite de Detecção , ÍonsRESUMO
A reconfigurable silicon microring filter, which is constructed by cascading a tunable Mach-Zehnder interferometer and a double injected silicon microring resonator with a variable input angle, is proposed and investigated. The spectra reconfigurations of the optical filter were simulated and analyzed using the transmission matrix method. The results show that when keeping the perimeter of the microring constant, the free spectral range (FSR) of the filter can be multiplied by adjusting the angle between the two injections. Moreover, by changing the coupling coefficients of the microring and the optical power ratio between the two injections, different types of spectral responses such as square, sinusoidal, and flat-top interleaver can be obtained. The device is simple and easy to integrate, and its capabilities to expand the FSR and spectral reconfiguration may have great potential in reconfigurable integrated optic chips.
RESUMO
We propose a machine-learning-based method for grating waveguides and augmented reality, significantly reducing the computation time compared with existing finite-element-based numerical simulation methods. Among the slanted, coated, interlayer, twin-pillar, U-shaped, and hybrid structure gratings, we exploit structural parameters such as grating slanted angle, grating depth, duty cycle, coating ratio, and interlayer thickness to construct the gratings. The multi-layer perceptron algorithm based on the Keras framework was used with a dataset comprised of 3000-14,000 samples. The training accuracy reached a coefficient of determination of more than 99.9% and an average absolute percentage error of 0.5%-2%. At the same time, the hybrid structure grating we built achieved a diffraction efficiency of 94.21% and a uniformity of 93.99%. This hybrid structure grating also achieved the best results in tolerance analysis. The high-efficiency artificial intelligence waveguide method proposed in this paper realizes the optimal design of a high-efficiency grating waveguide structure. It can provide theoretical guidance and technical reference for optical design based on artificial intelligence.
RESUMO
In this work, a hollow-core anti-resonant terahertz (THz) fiber with elliptical cladding and nested tubes is proposed and fabricated. It is an effective way to reduce the loss of THz waves by transmitting them in an air core and breaking the material absorption. After parameter optimization of the initial structure, multiple transmission windows exist in the 0.2-0.8 THz band, where confinement loss is as low as 3.47×10-3cm-1 at 0.8 THz. At 0.2-0.7 THz, confinement losses lie between 10-3 and 10-2cm-1. The 3D printed samples are characterized by a THz time-domain spectroscopy system. Experimental results showed that the designed fiber structure transmits loss coefficients up to 10-2cm-1 in the 0.2-0.8 THz band (the minimum value is located at 0.46 THz, corresponding to a loss coefficient of 0.0284cm-1). The experiments show that the designed THz fiber achieves a good transmission effect.
RESUMO
Tumor cell-derived extracellular vesicles and their cargo of bioactive substances have gradually been recognized as novel biomarkers for cancer diagnosis. Meanwhile, the PD-L1 (Programmed Death-Ligand 1) protein, as an immune checkpoint molecule, is highly expressed on certain tumor cells and holds significant potential in immune therapy. In comparison to PD-L1 monoclonal antibodies, the inhibitory effect of PD-L1 siRNA (small interfering RNA) is more advantageous. In this article, we introduced a microfluidic chip integrating cell cultivation and exosome detection modules, which were intended for the investigation of the gene silencing effect of PD-L1 siRNA. Basically, cells were first cultured with PD-L1 siRNA in the chip. Then, the secreted exosomes were detected via super-resolution imaging, to validate the inhibitory effect of siRNA on PD-L1 expression. To be specific, a "sandwich" immunological structure was employed to detect exosomes secreted from HeLa cells. Immunofluorescence staining and DNA-PAINT (DNA Point Accumulation for Imaging in Nanoscale Topography) techniques were utilized to quantitatively analyze the PD-L1 proteins on HeLa exosomes, which enabled precise structural and content analysis of the exosomes. Compared with other existing PD-L1 detection methods, the advantages of our work include, first, the integration of microfluidic chips greatly simplifying the cell culture, gene silencing, and PD-L1 detection procedures. Second, the utilization of DNA-PAINT can provide an ultra-high spatial resolution, which is beneficial for exosomes due to their small sizes. Third, qPAINT could allow quantitative detection of PD-L1 with better precision. Hence, the combination of the microfluidic chip with DNA-PAINT could provide a more powerful integrated platform for the study of PD-L1-related tumor immunotherapy.
Assuntos
Exossomos , Humanos , Antígeno B7-H1/genética , Células HeLa , RNA Interferente Pequeno/genética , DNARESUMO
Surface-enhanced Raman spectroscopy (SERS) is a promising technology for wearable sensors due to its fingerprint spectrum and high detection sensitivity. However, since SERS-activity is sensitive to both the distribution of "hotspots" and excitation angle, it is profoundly challenging to develop a wearable SERS sensor with high stability under various deformations during movements. Herein, inspired by omnidirectional light-harvesting of the compound eye of Xenos Peckii, a wearable SERS sensor is developed using omnidirectional plasmonic nanovoids array (OPNA), which is prepared by assembling a monolayer of metal nanoparticles into the artificial plasmonic compound-eye (APC). Specifically, APC is an interconnected frame containing omnidirectional "pockets" and acts as an "armour", not only rendering a broadband and omnidirectional enhancement of "hotspots" in the delicate nanoparticles array, but also maintaining an integrity of the "hotspots" against external mechanical deformations. Furthermore, an asymmetry super-hydrophilic pattern is fabricated on the surface of OPNA, endowing the hydrophobic OPNA with the ability to spontaneously extract and concentrate the analytes from sweat. Such an armored SERS sensor can enable the wearable and in situ analysis with high sensitivity and stability, exhibiting great potential in point-of-care analysis.
Assuntos
Nanopartículas Metálicas , Dispositivos Eletrônicos Vestíveis , Interações Hidrofóbicas e Hidrofílicas , Nanopartículas Metálicas/química , Análise Espectral Raman/métodosRESUMO
Since chirality is a fundamental building block of nature, the identification of the chiral specimen's structure is of great interest, especially in applications involving the modification and utilization of proteins. In this work, by exploiting photoinduced force exerted on an achiral tip placed in the vicinity of a reciprocal chiral sample, a novel technique is proposed to detect the sample's chirality in nanoscale spatial resolution. Under separate excitation of focal field carrying chiral dipole moment with opposite handedness, there is a differential optical force ΔF exerted on the tip apex, which is connected to the enantiomer type and quasi-linearly depends on specific component of the sample's chirality parameter. With the help of time-reversal approach, we prove that the required excitation can be derived by radiation fields from the superposition of parallel electric and magnetic dipoles. Through adjusting the orientation of the chiral dipole moment, all the diagonal components of the sample's chirality can be exclusively retrieved. In addition, the sensitivity of the proposed technique is demonstrated to enantiospecify nanoscale chiral samples with chirality parameter on the order of 0.001. The proposed technique may open new avenue for wide applications in biomedicine, material science and pharmaceutics.
RESUMO
Spatiotemporal (ST) wave packet carrying pure transverse orbital angular moment (OAM) with subwavelength spatial size has attracted increasing attentions in recent years, which can be obtained by tightly focusing a linear superposition of ST vortices with different topological charges. In this work, numerical models are proposed to explore the impact of the pulse width of the ST vortex on the characteristics of its focal field. We demonstrate that the rigorous model for calculating the focused ST wave packet is essential for ultrashort optical pulse, while the simplified model has the advantage of high efficiency but can only provide credible results when the pulse width of the illumination is long enough. Specifically, when the pulse width decreases from 100 fs to 5 fs, the accuracy of the simplified model would decrease significantly from 99% to 65.5%. In addition, it is found that the pulse duration would still lead to the collapse of transverse OAM structure near the focus of a high numerical aperture lens, even though the ST astigmatism has already been corrected. To analyze the physical mechanism behind this distortion, Levenberg-Marquardt algorithm is adopted to retrieve the OAM distribution of the focal field. It is shown that the contributions from undesired OAM modes would become nontrivial for short pulse width, leading to the formation of the focal field with hybrid OAM structures. These findings provide insight for the focusing and propagation studies of ultrashort ST wave packets, which could have wide potential applications in microscopy, optical trapping, laser machining, nonlinear light-matter interactions, etc.
RESUMO
Fano resonance with asymmetric line shape is very promising in many applications such as optical switching, sensing, slow light, laser. Fano resonances based on some integrated structures have been demonstrated on the silicon on insulator platform. However, the extinction ratios and slope rates of the most proposed integrated Fano resonances are relatively low, which limits their applications. In this paper, a tunable silicon nitride coupled resonator optical waveguide (CROW) embedded in a Mach-Zehnder interferometer (MZI) is proposed to achieve Fano resonance. Benefiting from fine tuning supported by the low thermo-optic coefficient of the silicon nitride optical waveguide, the optical amplitudes and phases in the two arms of the MZI were accurately adjusted to achieve destructive interference, which gives an ultra-high extinction ratio. Furthermore, high quality factor CROW, supported by the native low loss silicon nitride optical waveguide, greatly shrinks the resonance bandwidth. Combining the above two superiorities, a Fano resonance with a very high extinction ratio of up to 57 dB and slope rate as high as 8.1 × 104 dB/nm was obtained, which is an order of magnitude larger than the reported integrated Fano resonances. We believe that the proposed structure would be a promising candidate for high-performance switching and high-sensitivity sensing.
RESUMO
Spin angular momentum (SAM) is widely used in spin-dependent unidirectional optical interfaces, optical manipulation, integrated optical signal processing, laser structuring and other fields, but its physical mechanism has not been fully understood so far. In this work, we investigate the three-dimensional (3D) SAM in tightly focused x-polarized first-order vortex beams from the perspectives of light field itself, phase distribution, and focusing propagation. It is shown that the distribution of three orthogonal components of SAM at the focal plane has pseudo two-fold rotational symmetry, because the cycloidal rotation of the electric field of the tightly focused vortex beam is opposite. The 3D SAM distribution in the focal region is visualized by mapping the 3D distribution of state of polarization (SoP). In addition, a principle experimental method for identifying the transverse SAM by using the direction of particle's rotation axis in optical tweezers is proposed.
RESUMO
In this paper, based on the low loss double strip silicon nitride platform, we designed and fabricated an ultra-low loss 1×4 microwave photonic beamforming chip, which contains a 1×4 beam splitter and four 5-bit optical delay lines. Each optical delay line can achieve 32 delay states varying from 0 ps to about 130 ps, which can support 21 different beamforming angles covers from -56.42° to 56.68° for 10 GHz RF signal. A low on-chip insertion loss of about 4 dB is achieved for each 5-bit optical delay line. Furthermore, a very low loss delay ratio of about 0.0016 dB/ps is achieved and a recorded low loss fluctuation of about 0.3 dB is obtained during the 32 states delay switching. In addition, the switching speed and driving power consumptions of the proposed beamforming chip were investigated. The proposed beamforming chip could have great potential in optical controlled phased antenna arrays systems.
RESUMO
Microwave frequency combs (MFCs) have important applications in communication and sensing owing to their characteristics of large number of comb lines, wide frequency range, and high precision of comb spacing. In many applications, MFCs are required to emit signals with tunable center frequency and variable comb spacing to accommodate different operating frequency bands and accuracies. Here, we demonstrate a tunable MFC by injecting a low-frequency electrical signal into a tunable optoelectronic oscillator (OEO). Tuning of MFC's center frequency and comb spacing are realized, allowing a frequency tuning range from 1 to 22 GHz and 50 comb lines within a 5 MHz bandwidth obtained in the MFC generator. In addition, the introduction of the silicon nitride micro-disk resonator (Si3N4-MDR) in the system paves the way for the integration of MFC generator.
RESUMO
A compact and broadband silicon mode-order converter (MOC) scheme by employing reciprocal mode evolution between asymmetric input/output taper and bricked subwavelength gratings (BSWG) is proposed. In the proposed MOC, a quasi-TE0 mode is generated in the BSWG region, which can be regarded as an effective bridge between the two TE modes to be converted. Flexible mode conversion can be realized by only choosing appropriate structure parameters for specific mode transitions between input/output modes and the quasi-TE0 mode. By combing 3D finite difference time domain (FDTD) and particle swarm optimization (PSO) method, TE0-TE1 and TE0-TE2 MOCs are optimal designed, which can efficiently convert TE0 mode to TE1 and TE2 modes with lengths of 9.39 µm and 11.27 µm, respectively. Results show that the insertion losses of <1 dB and crosstalk of <-15 dB are achieved for both TE0-TE1 and TE0-TE2 MOCs, the corresponding working bandwidth are 128 nm (1511â¼1639 nm) and 126 nm (1527â¼1653 nm), respectively. Additionally, the MOCs can be fabricated with only single etch step with minimum feature size of 145 nm.