Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting.

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

Metal-organic framework heterojunctions for photocatalysis.

Heterojunctions combining two photocatalysts of staggered conduction and valence band energy levels can increase the photocatalytic efficiency compared to their individual components. This activity enhancement is due to the minimization of undesirable charge recombination by the occurrence of carrier migration through the heterojunction interface with separated electrons and holes on the reducing and oxidizing junction component, respectively. Metal-organic frameworks (MOFs) are currently among the most researched photocatalysts due to their tunable light absorption, facile charge separation, large surface area and porosity. The present review summarizes the current state-of-the-art in MOF-based heterojunctions, providing critical comments on the construction of these heterostructures. Besides including examples showing the better performance of MOF heterojunctions for three important photocatalytic processes, such as hydrogen evolution reaction, CO2 photoreduction and dye decolorization, the focus of this review is on describing synthetic procedures to form heterojunctions with MOFs and on discussing the experimental techniques that provide evidence for the operation of charge migration between the MOF and the other component. Special attention has been paid to the design of rational MOF heterojunctions with small particle size and controlled morphology for an appropriate interfacial contact. The final section summarizes the achievements of the field and provides our views on future developments.

Correction: Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications.

Correction for 'Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications' by Saba Daliran et al., Chem. Soc. Rev., 2024, https://doi.org/10.1039/d3cs01057k.

Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications.

This comprehensive review explores the diverse applications of defective zirconium-based metal-organic frameworks (Zr-MOFs) in energy and environmental remediation. Zr-MOFs have gained significant attention due to their unique properties, and deliberate introduction of defects further enhances their functionality. The review encompasses several areas where defective Zr-MOFs exhibit promise, including environmental remediation, detoxification of chemical warfare agents, photocatalytic energy conversions, and electrochemical applications. Defects play a pivotal role by creating open sites within the framework, facilitating effective adsorption and remediation of pollutants. They also contribute to the catalytic activity of Zr-MOFs, enabling efficient energy conversion processes such as hydrogen production and CO2 reduction. The review underscores the importance of defect manipulation, including control over their distribution and type, to optimize the performance of Zr-MOFs. Through tailored defect engineering and precise selection of functional groups, researchers can enhance the selectivity and efficiency of Zr-MOFs for specific applications. Additionally, pore size manipulation influences the adsorption capacity and transport properties of Zr-MOFs, further expanding their potential in environmental remediation and energy conversion. Defective Zr-MOFs exhibit remarkable stability and synthetic versatility, making them suitable for diverse environmental conditions and allowing for the introduction of missing linkers, cluster defects, or post-synthetic modifications to precisely tailor their properties. Overall, this review highlights the promising prospects of defective Zr-MOFs in addressing energy and environmental challenges, positioning them as versatile tools for sustainable solutions and paving the way for advancements in various sectors toward a cleaner and more sustainable future.

Opportunities of MXenes in Heterogeneous Catalysis: V2C as Aerobic Oxidation Catalyst.

MXenes are two-dimensional nanomaterials having alternating sheets of one atom-thick early transition metal layer and one atom-thick carbide or nitride layer. The external surface contains termination groups, whose nature depends on the etching agent used in the preparation procedure from the MAX phase. The present concept proposes that, due to their composition, the metal-surface termination groups make MXenes particularly suited as heterogeneous catalysts for some reactions. This proposal comes from the consideration that early transition metal atoms bonded to hydroxyl and oxo groups are a general type of active sites in heterogeneous catalysis and that similar catalytic centers can also be present in the MXene structure. After having presented the concept, we have selected V2C Mxene as an example to illustrate its catalytic activity and to show how the catalytic performance varies when the surface groups are modified. As a test reaction, we selected the aerobic oxidation of indane to the corresponding indanol/indanone mixture using molecular oxygen as terminal oxidizing reagent. Two previously reported procedures to modify the surface groups, namely surface dehydroxylation by thermal treatment under diluted hydrogen flow and surface oxidation with ammonium persulfate to convert some surface groups into oxo groups were used, observing in both cases a decrease in the catalytic activity of V2C. Based on this, VIII/IV-OH are proposed as catalytic centers in this aerobic oxidation. Overall, the present concept shows the merits of MXenes in heterogeneous catalysis, based on their chemical composition and the surface functionality.

Design of Multivariate Biological Metal-Organic Frameworks: Toward Mimicking Active Sites of Enzymes.

Mimicking enzymatic processes carried out by natural enzymes, which are highly efficient biocatalysts with key roles in living organisms, attracts much interest but constitutes a synthetic challenge. Biological metal-organic frameworks (bioMOFs) are potential candidates to be enzyme catalysis mimics, as they offer the possibility to combine biometals and biomolecules into open-framework porous structures capable of simulating the catalytic pockets of enzymes. In this work, we first study the catalase activity of a previously reported bioMOF, derived from the amino acid L-serine, with formula {CaIICuII6[(S,S)-serimox]3(OH)2(H2O)} · 39H2O (1) (serimox = bis[(S)-serine]oxalyl diamide), which is indeed capable to mimic catalase enzymes, in charge of preventing cell oxidative damage by decomposing, efficiently, hydrogen peroxide to water and oxygen (2H2O2 → 2 H2O + O2). With these results in hand, we then prepared a new multivariate bioMOF (MTV-bioMOF) that combines two different types of bioligands derived from L-serine and L-histidine amino acids with formula CaIICuII6[(S,S)-serimox]2[(S,S)-hismox]1(OH)2(H2O)}·27H2O (2) (hismox = bis[(S)-histidine]oxalyl diamide ligand). MTV-bioMOF 2 outperforms 1 degrading hydrogen peroxide, confirming the importance of the amino acid residue from the histidine amino acid acting as a nucleophile in the catalase degradation mechanism. Despite displaying a more modest catalytic behavior than other reported MOF composites, in which the catalase enzyme is immobilized inside the MOF, this work represents the first example of a MOF in which an attempt is made to replicate the active center of the catalase enzyme with its constituent elements and is capable of moderate catalytic activity.

Selective Gas-Phase Hydrogenation of CO2 to Methanol Catalysed by Metal-Organic Frameworks.

Large scale production of green CH3 OH obtained from CO2 and green H2 is a highly wanted process due to the role of CH3 OH as H2 /energy carrier and for producing chemicals. Starting with a short summary of the advantages of metal-organic frameworks (MOFs) as catalysts in liquid-phase reactions, the present article highlights the opportunities that MOFs may offer also for some gas-phase reactions, particularly for the selective CO2 hydrogenation to CH3 OH. It is commented that there is a temperature compatibility window that combines the thermal stability of some MOFs with the temperature required in the CO2 hydrogenation to CH3 OH that frequently ranges from 250 to 300 °C. The existing literature in this area is briefly organized according to the role of MOF as providing the active sites or as support of active metal nanoparticles (NPs). Emphasis is made to show how the flexibility in design and synthesis of MOFs can be used to enhance the catalytic activity by adjusting the composition of the nodes and the structure of the linkers. The influence of structural defects and material crystallinity, as well as the role that should play theoretical calculations in models have also been highlighted.

New Opportunities in Metal-Organic Framework Catalysis: From Bifunctional to Frustrated Lewis Pairs Catalysis.

This article highlights novel prospects for metal-organic frameworks (MOFs) in heterogeneous catalysis as having frustrated Lewis acid-base pairs (FLPs) or as bifunctional acid-base solid catalysts able to activate molecular hydrogen. Starting from the extensive application MOFs as Lewis acid and Lewis base catalysts, this article uses catalytic hydrogenation to briefly summarize the efforts made to heterogenize boron and amine in MOFs to mimic molecular FLP systems. The core of this concept is based on recent findings which demonstrate the ability of two commonly used MOFs, namely UiO-66 and MIL-101, to catalyze the selective hydrogenation of polar double X=Y bonds at moderate H2 pressures below 10 bar. The influence of electron-donating, the withdrawal of substituents on the linker, and the aniline poisoning effect highlight the significance of Lewis acid sites, while density-functional theory calculations indicate the heterolytic H-H bond cleavage at the MOF metal oxo clusters. It is expected that this new perspective on MOFs as solid FLP systems will spur further research to explore and define the potential of dual sites in the catalytic activation of small molecules.

Functionalized Metal-Organic Framework for Selective Fluorometric Detection of Sodium Dodecyl Sulfate and Vitamin B12 Using MOF@Cotton Composites and Lewis Base-Catalyzed Condensation Reaction.

A zirconium(IV)-based metal-organic framework (MOF) fluorophore containing the 2,5-diaminoterephthalic acid (H2BDC-(NH)2) linker was synthesized and characterized. The physicochemically stable, porous (SBET = 504 m2 g-1) MOF (1') exhibited selective and sensitive fluorescence turn-on behavior toward the sodium dodecyl sulfate (SDS) surfactant and turn-off response toward vitamin B12. This is the first ever reported MOF-based dual optical sensor of SDS and vitamin B12. Other competitive analytes did not interfere in the detection of both the analytes. Along with the lowest ever reported limit of detection (LOD) values (LOD for SDS = 108 nM and LOD for vitamin B12 = 45.3 nM), 1' displayed short response time for SDS (50 s) and vitamin B12 (5 s) detection. The MOF was able to detect SDS in various real water samples and vitamin B12 in various bio-fluids (urine and serum) and pH media. A MOF-coated cotton composite was fabricated, which displayed a visible color change under UV light even after treating it with a nanomolar concentration of both the analytes. The sensor displayed excellent reusability up to five cycles of sensing. Various experimental outcomes evidenced that the electrostatic interaction between the -NH2 groups of the linker and the -SO3- group of SDS is the possible reason for the selective SDS sensing. For vitamin B12, the energy transfer from the probe to vitamin B12 resulted in fluorescence quenching. In addition, the catalytic performance of 1' was investigated in the condensation reaction between benzaldehyde derivatives with cyanoacetamide with high yields in ethanol at 70 °C. The solid was used for three cycles with no decrease in its activity and selectivity. PXRD and FESEM analysis before and after the reaction suggested the retention of the crystallinity of 1', thus indicating catalyst stability.

A Zr-Based Metal-Organic Framework with a DUT-52 Structure Containing a Trifluoroacetamido-Functionalized Linker for Aqueous Phase Fluorescence Sensing of the Cyanide Ion and Aerobic Oxidation of Cyclohexane.

A zirconium (Zr) metal-organic framework having a DUT-52 (DUT stands for Dresden University of Technology) structure with face-centered cubic topology and bearing the rigid 1-(2,2,2-trifluoroacetamido) naphthalene-3,7-dicarboxylic acid (H2NDC-NHCOCF3) ligand was prepared, and its solid structure was characterized with the help of the X-ray powder diffraction (XRPD) technique. Other characterization methods like thermogravimetric analysis (TGA) and Fourier transform infrared (FT-IR) spectroscopy were applied to verify the phase purity of the compound. In order to get the solvent-free compound (1'), 1 was stirred with methanol for overnight and subsequently heated at 100 °C overnight under vacuum. As-synthesized (1) and activated (1') compounds are thermally stable up to 300 °C. The Brunsuer Emmett-Teller (BET) surface area of 1' was found to be 1105 m2 g-1. Fluorescence titration experiments showed that 1' exhibits highly selective and sensitive fluorescence turn-on behavior toward cyanide (CN-) anion. The interference experiments suggested that other anions did not interfere in the detection of CN-. Moreover, a very short response time (2 min) was shown by probe 1' for CN- detection. The detection limit was found to be 0.23 µM. 1' can also be effectively used for CN- detection in real water samples. The mechanism for the selective detection of CN- was investigated systematically. Furthermore, the aerobic oxidation of cyclohexane was performed with 1' under mild reaction conditions, observing higher activity than the analogous DUT-52 solid under identical conditions. These experiments clearly indicate the benefits of hydrophobic cavities of 1' in achieving higher conversion of cyclohexane and cyclohexanol/cyclohexanone selectivity. Catalyst stability was proved by two consecutive reuses and comparing the structural integrity of 1' before and after reuses by the XRPD study.

A Visual and Ratiometric Chemosensor Using Thiophene Functionalized Hydrazone for the Selective Sensing of Pb2+ and F- Ions.

Herein, a simple, efficient ratiometric chemosensor was reported for the selective sensing of Pb2+ and F- ions using thiophene functionalized hydrazone as a chemical probe. Hydrazone moiety was developed by utilizing thiophene/naphthalene as a platform for the particular recognition of cation and anion. The structures of the precursor (Z)-(1-(5-bromothiophen-2-yl)ethylidene)hydrazine (ABTH) and the final probe 1-((Z)-(((Z)-1-(5-bromothiophen-2-yl)ethylidene)hydrazono)methyl)naphthalen-2-ol (NAPABTH) were confirmed by 1H, 13C-NMR and LC-MS spectroscopic methods. The interaction of NAPABTH with Pb2+ and F- ions was visually observed by the formation of pink and dark yellow solutions, respectively. The detection limits were found to be very low for Pb2+ as 1.06 ppm and for F- ions as 3.72 nM. This visual detection of Pb2+/F- ions with satisfactory outcomes obtained from UV-Vis titrations. The sensing mechanistic pathways and stoichiometric ratios were obtained from DFT and Job's plot, respectively. The observed results are highly promising as highly selective chemosensor with lower detection limits for Pb2+ and F- ions. This strategy could exhibit tremendous applications for the selective sensing of heavy metal cations with rapid sensitivity for the design of new devices.

Metal organic frameworks for biomass conversion.

Biomass is increasingly used as a source of fuels and chemicals as a renewable alternative to fossil feedstocks. Cellulose, hemicellulose and lignin are converted into platform chemicals from which a large range of compounds are derived with different structures. These biomass transformation processes require the use of efficient and durable catalysts that should drive the selectivity of the process. This review focuses on the use of metal-organic frameworks (MOFs) and derivatives as catalysts for biomass conversion. After an introduction setting up the importance of the field and the MOF features that justify their prevalence as heterogeneous catalysts for liquid phase reactions, the two main parts of the review are the description of MOF synthesis and adaptation and coverage of the catalytic reactions involving biomass substrates organized according to the type of MOF. The last section summarizes the current state of the art and our outlook for the future development of the field.

Metal-Organic Frameworks as Versatile Heterogeneous Solid Catalysts for Henry Reactions.

Metal-organic frameworks (MOFs) have become one of the versatile solid materials used for a wide range of applications, such as gas storage, gas separation, proton conductivity, sensors and catalysis. Among these fields, one of the more well-studied areas is the use of MOFs as heterogeneous catalysts for a broad range of organic reactions. In the present review, the employment of MOFs as solid catalysts for the Henry reaction is discussed, and the available literature data from the last decade are grouped. The review is organized with a brief introduction of the importance of Henry reactions and structural properties of MOFs that are suitable for catalysis. The second part of the review discusses the use of MOFs as solid catalysts for the Henry reaction involving metal nodes as active sites, while the third section provides data utilizing basic sites (primary amine, secondary amine, amides and urea-donating sites). While commenting on the catalytic results in these two sections, the advantage of MOFs over other solid catalysts is compared in terms of activity by providing turnover number (TON) values and the structural stability of MOFs during the course of the reaction. The final section provides our views on further directions in this field.

A Thiophene-2-carboxamide-Functionalized Zr(IV) Organic Framework as a Prolific and Recyclable Heterogeneous Catalyst for Regioselective Ring Opening of Epoxides.

A new thiophene-2-carboxamide-functionalized Zr-UiO-66 MOF (1) was synthesized by employing a traditional solvothermal procedure. Compound 1 displayed high thermal (up to 340 °C under an Ar atmosphere) and chemical stability (in water, 1 M HCl, and acetic acid). A nitrogen physisorption measurement with the activated form of 1 (denoted 1') exhibited a BET surface area (781 m2/g) despite attachment of a bulky side chain with the linker molecule. Compound 1' was able to heterogeneously catalyze the ring-opening reaction of epoxides with  amines. Catalyst 1' exhibited significant yields as well as wide substrate scope in the ring opening of epoxides by means of amines. It also displayed better catalytic performance in comparison to known MOF catalysts such as Cu3(BTC)2, Fe(BTC) (BTC: 1, 3, 5-benzenetricarboxylate), and Zr-UiO-66. Control experiments were performed with free linker,  Zr(IV) salt and without catalyst 1', confirming the exclusive role of 1' in the catalytic reaction. The reusability characteristics of catalyst 1' was established for up to five consecutive catalytic cycles. The synthesis and characterization of the linker molecule, material 1, and 1' and mechanism of the catalysis reaction were studied elaborately.

Highly Active Urea-Functionalized Zr(IV)-UiO-67 Metal-Organic Framework as Hydrogen Bonding Heterogeneous Catalyst for Friedel-Crafts Alkylation.

A new Zr(IV)-based UiO-67 metal-organic framework (1) was prepared with urea-functionalized biphenyl-4,4'-dicarboxylic acid (BPDC-urea) as the linker using conventional solvothermal technique and thoroughly characterized using X-ray powder diffraction (XRPD), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric (TG), and N2 sorption analyses. The activated form of 1 (called 1') exhibited excellent BET surface area in spite of having a large functional moiety (urea) in the linker side. The activated form of this material (1') was successfully employed for the Friedel-Crafts alkylation of indole with ß-nitrostyrene to achieve 97% yield in toluene at 70 °C for 24 h. Furthermore, the catalyst was used for four cycles, with no significant loss in its activity, and the reaction was heterogeneous in nature. The activity of 1' was comparable to UiO-67-(NH2)2, whereas the activity was 2-fold higher compared to the parent UiO-67. Further, the activity of the BPDC-urea linker was nearly 2-fold higher than that of ZrCl4, suggesting the crucial role played by the urea moiety than the metal node. In addition, the catalyst (1') exhibited a wide substrate scope, allowing the preparation of a series of compounds with moderate to high yields under the optimized reaction conditions. The roles of metal salt and linker in the catalysis have also been studied separately, and the mechanism for the catalysis has been clarified.

Catalysis and photocatalysis by metal organic frameworks.

Metal organic frameworks (MOFs) are a class of porous crystalline materials that feature a series of unique properties, such as large surface area and porosity, high content of transition metals, and possibility to be designed and modified after synthesis, that make these solids especially suitable as heterogeneous catalysts. The active sites can be coordinatively unsaturated metal ions, substituents at the organic linkers or guest species located inside the pores. The defects on the structure also create these open sites. The present review summarizes the current state of the art in the use of MOFs as solid catalysts according to the type of site, making special emphasis on the more recent strategies to increase the population of these active sites and tuning their activity, either by adapting the synthesis conditions or by post-synthetic modification. This review highlights those reports illustrating the synergy derived from the presence of more than one of these types of sites, leading to activation of a substrate by more than one site or to the simultaneous activation of different substrates by complementary sites. This synergy is frequently the main reason for the higher catalytic activity of MOFs compared to homogeneous catalysts or other alternative solid materials. Besides dark reactions, this review also summarizes the use of MOFs as photocatalysts emphasizing the uniqueness of these materials regarding adaptation of the linkers as light absorbers and metal exchange at the nodes to enhance photoinduced electron transfer, in comparison with conventional inorganic photocatalysts. This versatility and flexibility that is offered by MOFs to optimize their visible light photocatalytic activity explains the current interest in exploiting these materials for novel photocatalytic reactions, including hydrogen evolution and photocatalytic CO2 reduction.

Encapsulation of Metal Nanoparticles within Metal-Organic Frameworks for the Reduction of Nitro Compounds.

Nitro group reduction is a reaction of a considerable importance for the preparation of bulk chemicals and in organic synthesis. There are reports in the literature showing that incorporation of metal nanoparticles (MNPs) inside metal-organic frameworks (MOFs) is a suitable strategy to develop catalysts for these reactions. Some of the examples reported in the literature have shown activity data confirming the superior performance of MNPs inside MOFs. In the present review, the existing literature reports have been grouped depending on whether these MNPs correspond to a single metal or they are alloys. The final section of this review summarizes the state of the art and forecasts future developments in the field.

Mixed-Metal MOFs: Unique Opportunities in Metal-Organic Framework (MOF) Functionality and Design.

Mixed-metal metal-organic frameworks (MM-MOFs) can be considered to be those MOFs having two different metals anywhere in the structure. Herein we summarize the various strategies for the preparation of MM-MOFs and some of their applications in adsorption, gas separation, and catalysis. It is shown that compared to homometallic MOFs, MM-MOFs bring about the opportunity to take advantage of the complexity and the synergism derived from the presence of different metal ions in the structure of MOFs. This is reflected in a superior performance and even stability of MM-MOFs respect to related single-metal MOFs. Emphasis is made on the use of MM-MOFs as catalysts for tandem reactions.

Active sites on graphene-based materials as metal-free catalysts.

Graphenes and related materials have attracted growing interest as metal-free catalysts. The present review is focused on describing the active sites that have been proposed to be responsible for the catalytic activity observed for such systems. It will be shown that diverse defects and chemical functionalities on the graphene layers can catalyze reactions, including oxygenated functional groups, carbon vacancies and holes, edge effects, and the presence of dopant elements. Besides discrete active sites, the catalytic activity arising from the collective properties of graphenes as materials by adsorbing substrates and reagents and activating them by charge transfer is also commented. The review has an introductory general section summarizing the general methodologies that have been used to support the proposed structure of the active sites, including theoretical calculations, comparison of the catalytic activity of graphene samples with different compositions, the use of organic molecules as models of the active centers, and selective masking of functional groups. The review is concluded with our view on future developments in the field.

Metal-Organic Frameworks as Catalysts for Oxidation Reactions.

This Concept is aimed at describing the current state of the art in metal-organic frameworks (MOFs) as heterogeneous catalysts for liquid-phase oxidations, focusing on three important substrates, namely, alkenes, alkanes and alcohols. Emphases are on the nature of active sites that have been incorporated within MOFs and on future targets to be set in this area. Thus, selective alkene epoxidation with peroxides or oxygen catalyzed by constitutional metal nodes of MOFs as active sites are still to be developed. Moreover, no noble metal-free MOF has been reported to date that can act as a general catalyst for the aerobic oxidation of primary and secondary aliphatic alcohols. In contrast, in the case of alkanes, a target should be to tune the polarity of MOF internal pores to control the outcome of the autooxidation process, resulting in the selective formation of alcohol/ketone mixtures at high conversion.