RESUMO
IV-V two-dimensional materials have emerged as key contenders for polarization-sensitive and angle-resolved devices, given their inherent anisotropic physical properties. While these materials exhibit intriguing high-pressure quasi-particle behavior and phase transition, the evolution of quasi-particles and their interactions under external pressure remain elusive. Here, employing a diamond anvil cell and spectroscopic measurements coupled with first-principles calculations, we unveil rarely observed pressure-induced phonon-phonon coupling in layered SiP flakes. This coupling manifests as an anomalous phonon hardening behavior for the A1 mode within a broad wavenumber phonon softening region. Furthermore, we demonstrate the effective tuning of exciton emissions in SiP flakes under pressure, revealing a remarkable 63% enhancement in the degree of polarization (DOP) within the pressure range of 0-3.5 GPa. These findings contribute to our understanding of high-pressure phonon evolution in SiP materials and offer a strategic approach to manipulate the anisotropic performance of in-plane anisotropic 2D materials.
RESUMO
The interaction between light and moiré superlattices presents a platform for exploring unique light-matter phenomena. Tailoring these optical properties holds immense potential for advancing the utilization of moiré superlattices in photonics, optoelectronics, and valleytronics. However, the control of the optical polarization state in moiré superlattices, particularly in the presence of moiré effects, remains elusive. Here, we unveil the emergence of optical anisotropy in moiré superlattices by constructing twisted WSe2/WSe2/SiP heterostructures. We report a linear polarization degree of â¼70% for moiré excitons, attributed to the spatially nonuniform charge distribution, corroborated by first-principles calculations. Furthermore, we demonstrate the modulation of this linear polarization state via the application of a magnetic field, resulting in polarization angle rotation and a magnetic-field-dependent linear polarization degree, influenced by valley coherence and moiré potential effects. Our findings demonstrate an efficient strategy for tuning the optical polarization state of moiré superlattices using heterointerface engineering.
RESUMO
Moiré superlattices induced by twisted van der Waals (vdW) heterostructures or homostructures have recently gained significant attention due to their potential to generate exotic strong-correlation electronic and phonon phenomena. However, the lack of dynamic tuning for interlayer coupling of moiré superlattices hinders a thorough understanding and development of the moiré correlation state. Here, we present a dynamic tuning method for twisted WSe2/WSe2 homobilayers using a diamond anvil cell (DAC). We demonstrate the powerful tuning of interlayer coupling and observe an enhanced response to pressure for interlayer breathing modes and the rapid descent of indirect excitons in twisted WSe2/WSe2 homobilayers. Our findings indicate that the introduction of a moiré superlattice for WSe2 bilayers gives rise to hybridized excitons, which lead to the different pressure-evolution exciton behaviors compared to natural WSe2 bilayers. Our results provide a novel understanding of moiré physics and offer an effective method to tune interlayer coupling of moiré superlattices.
RESUMO
Two-dimensional (2D) semiconductors featuring low-symmetry crystal structures hold an immense potential for the design of advanced optoelectronic devices, leveraging their inherent anisotropic attributes. While the synthesis techniques for transition metal dichalcogenides (TMDs) have matured, a promising avenue emerges: the induction of anisotropy within symmetric TMDs through interlayer van der Waals coupling engineering. Here, we unveil the creation of heterostructures (HSs) by stacking highly symmetric MoSe2 with low-symmetry ReS2, introducing artificial anisotropy into monolayer MoSe2. Through a meticulous analysis of angle-dependent photoluminescence (PL) spectra, we discern a remarkable anisotropic intensity ratio of approximately 1.34. Bolstering this observation, the angle-resolved Raman spectra provide unequivocal validation of the anisotropic optical properties inherent to MoSe2. This intriguing behavior can be attributed to the in-plane polarization of MoSe2, incited by the deliberate disruption of lattice symmetry within the monolayer MoSe2 structure. Collectively, our findings furnish a conceptual blueprint for engineering both isotropic and anisotropic HSs, thereby unlocking an expansive spectrum of applications in the realm of high-performance optoelectronic devices.
RESUMO
In this work, we investigate the polarization of the excitonics valley in MoS2-WS2 heterostructures using circular polarization-resolved photoluminescence. The valley polarization is the largest (≈28.45%) in the 1L-1L MoS2-WS2 heterostructure and the polarizability of AWS2 decreases as the number of WS2 layers increases. We further observed a redshift of exciton XMoS2- in MoS2-WS2 heterostructures with the increase of WS2 layers, which is attributed to the displacement of the MoS2 band edge, indicating the layer-sensitive optical properties of the MoS2-WS2 heterostructure. Our findings shed light on the understanding of exciton behavior in multilayer MoS2-WS2 heterostructures that may promote their potential applications in optoelectronic devices.
RESUMO
Rhenium disulfide (ReS2) has emerged as a promising material for future optoelectric applications due to its extraordinary electrical, mechanical, and optoelectrical properties. However, the ReS2-based photodetectors are severely restricted by their slow response speed (>10 s). Here, we demonstrate a high-performance polarization-sensitive photodetector based on suspended ReS2. Such a transistor shows an n-type behavior with the mobility of about 14.1 cm2V-1s-1, an on/off ratio of 105, and a responsivity of 0.22 A/W. Benefitting from well-developed contact between Au and the ReS2 channel and reduced interface scattering from the Si substrate, the response time of the device can be as short as 83.5 and 325.3µs, respectively, which are three orders of magnitude faster than that reported earlier. Furthermore, the suspended ReS2 photodetector also has the capability to detect polarized light (Imax/Imin ≈ 1.4 at 532 nm) due to the robust in-plane anisotropy of the material. These findings offer an efficient approach for improving the performance of ReS2-based photodetectors.
RESUMO
Two-dimensional van der Waals heterostructures (vdWHs) are drawing growing interest in the investigation of their valley polarization properties of localized excitons. However, most of the reported vdWHs were made by micro-mechanical peeling, limiting their large-scale production and practical applications. Furthermore, the circular polarization characters of localized excitons in WSe2/WS2 heterostructures remain elusive. Here, a bidirectional-flow physical vapor deposition technique was employed for the synthesis of the WSe2/WS2 type-II vertical heterostructures. The interfaces of such heterojunctions are sharp and clean, making the neutral excitons of the constituent layers quenched, which significantly highlights the luminescence of the local excitons. The circular polarization of localized excitons in this WSe2/WS2 heterostructure was demonstrated by circularly-polarized PL spectroscopy. The degree of the circular polarization of the localized excitons was determined as 7.17% for σ- detection and 4.78% for σ+ detection. Such local excitons play a critical role in a quantum emitter with enhanced spontaneous emission rate that could lead to the evolution of LEDs. Our observations provide valuable information for the exploration of intriguing excitonic physics and the applications of innovative local exciton devices.
RESUMO
Interlayer excitons (IX) are produced by the spatially separated electron-hole pairs due to the robust Coulomb interactions in van der Waals transition metal dichalcogenide (TMDC) heterostructures (HSS). IX is characterized by a larger binding energy, and its lifetime is orders of magnitude longer than that of the direct excitons, providing a significant platform for the manufacture of long-lived exciton devices and the exploration of exciton quantum gas. However, the studies are restricted to the single interlayer exciton, and the simultaneous capture and study of double IX remain challenging in the WSe2/WS2 HS. Here, we demonstrate the existence of double indirect IX in the WSe2/WS2 HS with the emission centers at 1.4585eV (â¼25.9meV wide) and 1.4885â eV (â¼14.4â meV wide) at cryogenic temperature. Interestingly, the intensities of the double IX emission peaks are almost equal, and the energy difference between them is in a good agreement with the cleavage value of the WS2 conduction band (CB). Additionally, diverse types of excitons in the individual materials were successfully observed in the PL spectra at 8â K. Such unique double IX features, in combination with excellent exciton identification, open up new opportunities for further investigations for new physical properties of TMDCs and explorations for the technological innovation of exciton devices.
RESUMO
CO2 emissions from power plants are the dominant source of global CO2 emissions, thus in the context of global warming, accurate estimation of CO2 emissions from power plants is essential for the effective control of carbon emissions. Based on the XCO2 retrievals from the Orbiting Carbon Observatory 2 (OCO-2) and the Gaussian Plume Model (GPM), a series of studies have been carried out to estimate CO2 emission from power plants. However, the GPM is an ideal model, and there are a number of assumptions that need to be made when using this model, resulting in large uncertainties in the inverted emissions. Here, based on 6 cases of power plant plumes observed by the OCO-2 satellite over the Yangtze River Delta, China, we use an inline plume rise module coupled in the Community Multi-scale Air Quality model (CMAQ) to simulate the plumes and invert the emissions, and compare the simulated plumes and inverted emissions using the GPM model. We found that CO2 emissions can be significantly overestimated or underestimated based on the GPM simulations, and that the CMAQ inline plume simulation could significantly improve the estimates. However, the simulation bias in wind speed can significantly affect the inversion results. These results indicate that accurate meteorological field and plume simulations are critical for future inversion of point source emissions.
RESUMO
Some species of Carex can form tussocks, which are usually distributed in valleys and flood plains. The soil microbial community diversity and function of micro-habitats formed by tussocks are associated with plant diversity, and research on these associations can guide Carex tussock wetland restoration. In this study, we selected tussock wetlands dominated by Carex appendiculata, including natural wetlands (NW), artificially restored wetlands (ARW), and naturally restored wetlands (NRW), and investigated plant diversity. Soil samples were collected from the quadrats of each sample plot with the maximum (ma), median (me), and minimum (mi) plant Shannon index values, and high-throughput sequencing was used to analyze the bacterial community composition, diversity, and functions. The plant diversity indexes of neither ARW nor NRW significantly differed from that of NW, but the companion species in NRW were hygrophytes and mesophytes, in contrast to only hygrophytes serving as companion species in NW and ARW. The soil bacterial communities at the operational taxonomic unit level of the nine quadrats with different plant Shannon index values significantly (p < 0.01) differed. The relative abundances of the dominant phyla (Proteobacteria, Chloroflexi, and Bacteroidetes) and the dominant genera (Geobacter, Sideroxydans, and Clostridium except for unassigned genera) significantly (p < 0.05) differed under the different levels of plant diversity. The plant Shannon index, soil moisture content, total organic carbon, N, and P were significantly (p < 0.05 or p < 0.01) correlated with the bacterial Shannon index. The phylogenetic diversity of the bacterial community in NW was significantly (p < 0.0001) different from those in ARW and NRW, and that in ARW was also significantly (p < 0.05) different from that in NRW. The functional groups of bacterial communities associated with plant diversity. In the NWme, ARWme, and NRWme bacterial communities, the relative proportions of functional groups related to soil N cycle were higher, but those related to soil S and C cycles were lower. Considering the rehabilitation of both plant and microbial communities, the methods used for establishing the ARW are recommended for Carex tussock wetland restoration.
RESUMO
Moiré superlattices have emerged as a promising platform for investigating and designing optically generated excitonic properties. The electronic band structure of these systems can be qualitatively modulated by interactions between the top and bottom layers, leading to the emergence of new quantum phenomena. However, the inhomogeneities present in atomically thin bilayer moiré superlattices created by artificial stacking have hindered a deeper understanding of strongly correlated electron properties. In this work, we report the fabrication of homogeneous moiré superlattices with controllable twist angles using a 2L-WSe2/2L-WSe2 homostructure. By adding extra layers, we provide additional degrees of freedom to tune the optical properties of the moiré superlattices while mitigating the nonuniformity problem. The presence of an additional bottom layer acts as a buffer, reducing the inhomogeneity of the moiré superlattice, while the encapsulation effect of the additional top and bottom WSe2 monolayers further enhances the localized moiré excitons. Our observations of alternating circularly polarized photoluminescence confirm the existence of moiré excitons, and their characteristics were further confirmed by theoretical calculations. These findings provide a fundamental basis for studying moiré potential correlated quantum phenomena and pave the way for their application in quantum optical devices.
RESUMO
The stacking of twisted two-dimensional (2D) layered materials has led to the creation of moiré superlattices, which have become a new platform for the study of quantum optics. The strong coupling of moiré superlattices can result in flat minibands that boost electronic interactions and generate interesting strongly correlated states, including unconventional superconductivity, Mott insulating states, and moiré excitons. However, the impact of adjusting and localizing moiré excitons in Van der Waals heterostructures has yet to be explored experimentally. Here, we present experimental evidence of the localization-enhanced moiré excitons in the twisted WSe2/WS2/WSe2 heterotrilayer with type-II band alignments. At low temperatures, we observed multiple excitons splitting in the twisted WSe2/WS2/WSe2 heterotrilayer, which is manifested as multiple sharp emission lines, in stark contrast to the moiré excitonic behavior of the twisted WSe2/WS2 heterobilayer (which has a linewidth 4 times wider). This is due to the enhancement of the two moiré potentials in the twisted heterotrilayer, enabling highly localized moiré excitons at the interface. The confinement effect of moiré potential on moiré excitons is further demonstrated by changes in temperature, laser power, and valley polarization. Our findings offer a new approach for localizing moiré excitons in twist-angle heterostructures, which has the potential for the development of coherent quantum light emitters.
RESUMO
The investigation of in-plane two-dimensional (2D) anisotropic materials has garnered significant attention due to their exceptional electronic, optical, and mechanical characteristics. The anisotropic optical properties and angle-dependent photodetectors based on 2D anisotropic materials have been extensively studied. However, novel in-plane anisotropic materials still need to be explored to satisfy for distinct environments and devices. Here, we report the remarkable anisotropic behavior of excitons and demonstrate a unique linear-dichroism transition of absorption between ultraviolet and visible light in layered silicon phosphide (SiP) through the analysis of polarization photoluminescence (PL) and absorbance spectra. Its high absorption linear dichroism ratio of 1.16 at 388 nm, 1.15 at 532 nm, and 1.19 at 733 nm is revealed, suggesting the brilliant non-isotropic responses. The robust periodic variation of the A1 and A2 Raman modes in 2D SiP materials allows for the determination of their crystal orientation. Furthermore, the presence of indirect excitons with phonon sidebands in the temperature-dependent PL spectra exhibits non-monotonic energy shifts with increasing temperature, which is attributed to an enhanced electron-phonon interaction and thermal expansion. Our findings provide valuable insights into the fundamental physical properties of layered SiP and offer guidelines for designing polarization-sensitive photodetectors and angle-dependent devices based on 2D anisotropic materials.
RESUMO
Moiré superlattices offer a fascinating platform for designing the properties of optical excitons. The moiré pattern can generate an ordered exciton array in space, making it possible for topological excitons and quantum emitters. Recently, evidence of moiré excitons in the twisted heterostructures of TMDs has been widely reported. However, to date, the capture and investigation of moiré excitons in the twisted homostructure (T-HS) remain elusive. Here, we report the observation of moiré excitons in the WS2/WS2 T-HS with a twist angle of about 1.5°. The PL spectrum of the T-HS region shows many small peaks with nearly constant peak spacing, which is attributed to the reconstructed moiré potential generated by the reconstructed moiré pattern to confine the intralayer excitons, thereby forming an ordered moiré exciton array. Furthermore, we have studied the influence of temperature and laser power on the moiré excitons as well as the valley polarization of the moiré excitons. Our results provide a promising prospect for further exploration of artificial excitonic crystals and quantum emitters of TMD moiré patterns.
RESUMO
Recent advances in twisted van der Waals heterostructure superlattices have emerged as a powerful and attractive platform for exploring novel condensed matter physics due to the interplay between the moiré potential and Coulomb interactions. The moiré superlattices act as a periodic confinement potential in space to capture interlayer excitons (IXs), resulting in moiré exciton arrays, which provide opportunities for quantum emitters and many-body physics. The observation of moiré IXs in twisted transition-metal dichalcogenide (TMD) heterostructures has recently been widely reported. However, the capture and study of the moiré intralayer excitons based on TMD twisted homobilayer (T-HB) remain elusive. Here, we report the observation of moiré intralayer excitons in a WSe2/WSe2 T-HB with a small twist angle by measuring PL spectrum. The multiple split peaks with an energy range of 1.55-1.73 eV are different from that of the monolayer WSe2 exciton peaks. The split peaks were caused by the trapping of intralayer excitons via the moiré potential. The confinement effect of the moiré potential on the moiré intralayer excitons was further demonstrated by the changing of temperature, laser power, and valley polarization. Our findings provide a new avenue for exploring new correlated quantum phenomena and their applications.
RESUMO
A previous study on mobilization of organochlorine pesticides (OCPs) in contaminated soils from the field revealed that the total amount of OCPs measured in digestive fluid and chyme of an in vitro gastrointestinal model was higher than the quantity directly extracted using a solvent extraction without digestion, providing a clue that the bound residue of OCPs might be mobilized. This hypothesis was tested in this study for both OCPs and polycyclic aromatic hydrocarbons (PAHs). Three contaminated surface soil samples with different organic carbon (OC) contents were collected from the field, and extracted with a solvent with and without digestion in an in vitro gastrointestinal model. It was found that bound residues of OCPs and PAHs were mobilized to a certain extent during digestion. The ratios of the mobilized bound residues over the total quantities extracted after digestion (R(b)) varied from 0 to 0.96 for individual compounds. The R(b) was positively correlated with OC content. Among the five constitutes of digestive juice, bile salt was the only one that served to mobilize the bound residues and the extractability of bile salt was constant over a concentration range from 2 to 20 mg/mL. The mobilization process followed typical first-order kinetics. The calculated rate constants suggest that mobilization was fast and 90% of extracted bound residues of OCPs and PAHs were mobilized within 2.4 and 4.8 h, respectively.
Assuntos
Suco Gástrico/metabolismo , Hidrocarbonetos Clorados/química , Resíduos de Praguicidas/química , Hidrocarbonetos Policíclicos Aromáticos/química , Poluentes do Solo/química , Ácidos e Sais Biliares/metabolismo , Hidrocarbonetos Clorados/análise , Hidrocarbonetos Clorados/metabolismo , Cinética , Modelos Biológicos , Modelos Químicos , Resíduos de Praguicidas/análise , Resíduos de Praguicidas/metabolismo , Hidrocarbonetos Policíclicos Aromáticos/análise , Hidrocarbonetos Policíclicos Aromáticos/metabolismo , Solo/química , Poluentes do Solo/análise , Poluentes do Solo/metabolismoRESUMO
Indoor solid fuel combustion is a dominant source of polycyclic aromatic hydrocarbons (PAHs) and oxygenated PAHs (OPAHs) and the latter are believed to be more toxic than the former. However, there is limited quantitative information on the emissions of OPAHs from solid fuel combustion. In this study, emission factors of OPAHs (EF(OPAH)) for nine commonly used crop residues and five coals burnt in typical residential stoves widely used in rural China were measured under simulated kitchen conditions. The total EF(OPAH) ranged from 2.8 ± 0.2 to 8.1 ± 2.2 mg/kg for tested crop residues and from 0.043 to 71 mg/kg for various coals and 9-fluorenone was the most abundant specie. The EF(OPAH) for indoor crop residue burning were 1-2 orders of magnitude higher than those from open burning, and they were affected by fuel properties and combustion conditions, like moisture and combustion efficiency. For both crop residues and coals, significantly positive correlations were found between EFs for the individual OPAHs and the parent PAHs. An oxygenation rate, R(o), was defined as the ratio of the EFs between the oxygenated and parent PAH species to describe the formation potential of OPAHs. For the studied OPAH/PAH pairs, mean R(o) values were 0.16-0.89 for crop residues and 0.03-0.25 for coals. R(o) for crop residues burned in the cooking stove were much higher than those for open burning and much lower than those in ambient air, indicating the influence of secondary formation of OPAH and loss of PAHs. In comparison with parent PAHs, OPAHs showed a higher tendency to be associated with particulate matter (PM), especially fine PM, and the dominate size ranges were 0.7-2.1 µm for crop residues and high caking coals and <0.7 µm for the tested low caking briquettes.
Assuntos
Poluentes Atmosféricos/análise , Poluição do Ar em Ambientes Fechados/análise , Combustíveis Fósseis/análise , Hidrocarbonetos Policíclicos Aromáticos/análise , Poluentes Atmosféricos/química , Poluição do Ar em Ambientes Fechados/estatística & dados numéricos , Culinária/estatística & dados numéricos , Produtos Agrícolas/química , Oxigênio/química , Hidrocarbonetos Policíclicos Aromáticos/químicaRESUMO
Indoor combustion of crop residues for cooking or heating is one of the most important emission sources of polycyclic aromatic hydrocarbons (PAHs) in developing countries. However, data on PAH emission factors (EFs) for burning crop residues indoor, particularly those measured in the field, were scarce, leading to large uncertainties in the emission inventories. In this study, EFs of PAHs for nine commonly used crop residues burned in a typical Chinese rural cooking stove were measured in a simulated kitchen. The measured EFs of total PAHs averaged at 63 ± 37 mg/kg, ranging from 27 to 142 mg/kg, which were higher than those measured in chamber experiments, implying that the laboratory experiment-based emission and risk assessment should be carefully reviewed. EFs of gaseous and particulate phase PAHs were 27 ± 13 and 35 ± 23 mg/kg, respectively. Composition profiles and isomer ratios of emitted PAHs were characterized. Stepwise regressions found that modified combustion efficiency and fuel moisture were the most important factors affecting the emissions. There was 80 ± 6% of PAHs associated with PM2.5, and the mass percentage of PAHs in fine particles increased as the molecular weight increased. For freshly emitted PAHs, absorption into organic carbon, rather than adsorption, dominated the gas-particle partitioning.
Assuntos
Poluição do Ar em Ambientes Fechados/análise , Culinária , Hidrocarbonetos Policíclicos Aromáticos/análise , China , Produtos Agrícolas , Incêndios , Gases , Calefação , Utensílios Domésticos , População RuralRESUMO
Both particulate matter (PM) and black carbon (BC) impact climate change and human health. Uncertainties in emission inventories of PM and BC are partially due to large variation of measured emission factors (EFs) and lack of EFs from developing countries. Although there is a debate whether thermal-optically measured elemental carbon (EC) may be referred to as BC, EC is often treated as the same mass of BC. In this study, EFs of PM (EF(PM)) and EC (EF(EC)) for 9 crop residues and 5 coals were measured in actual rural cooking and coal stoves using the carbon mass balance method. The dependence of the EFs on fuel properties and combustion conditions was investigated. It was found that the mean EF(PM) were 8.19 ± 4.27 and 3.17 ± 4.67 g/kg and the mean EF(EC) were 1.38 ± 0.70 and 0.23 ± 0.36 g/kg for crop residues and coals, respectively. PM with size less than 10 µm (PM(10)) from crop residues were dominated by particles of aerodynamic size ranging from 0.7 to 2.1 µm, while the most abundant size ranges of PM(10) from coals were either from 0.7 to 2.1 µm or less than 0.7 µm. Of various fuel properties and combustion conditions tested, fuel moisture and modified combustion efficiency (MCE) were the most critical factors affecting EF(PM) and EF(EC) for crop residues. For coal combustion, EF(PM) were primarily affected by MCE and volatile matter, whereas EF(EC) were significantly influenced by ash content, volatile matter, heat value, and MCE. It was also found that EC emissions were significantly correlated with emissions of PM with size less than 0.4 µm.
Assuntos
Carbono/química , Carvão Mineral/análise , Produtos Agrícolas/química , Utensílios Domésticos , Incineração , Material Particulado/química , Resíduos/análise , China , Tamanho da Partícula , Análise de RegressãoRESUMO
Coal consumption is one important contributor to energy production, and is regarded as one of the most important sources of air pollutants that have considerable impacts on human health and climate change. Emissions of polycyclic aromatic hydrocarbons (PAHs) from coal combustion were studied in a typical stove. Emission factors (EFs) of 16 EPA priority PAHs from tested coals ranged from 6.25 ± 1.16 mg kg-1 (anthracite) to 253 ± 170 mg kg-1 (bituminous), with NAP and PHE dominated in gaseous and particulate phases, respectively. Size distributions of particulate phase PAHs from tested coals showed that they were mostly associated with particulate matter (PM) with size either between 0.7 and 2.1 µm or less than 0.4 µm (PM0.4). In the latter category, not only were more PAHs present in PM0.4, but also contained higher fractions of high molecular weight PAHs. Generally, there were more than 89% of total particulate phase PAHs associated with PM2.5. Gas-particle partitioning of freshly emitted PAHs from residential coal combustions were thought to be mainly controlled by absorption rather than adsorption, which is similar to those from other sources. Besides, the influence of fuel properties and combustion conditions was further investigated by using stepwise regression analysis, which indicated that almost 57 ± 10% of total variations in PAH EFs can be accounted for by moisture and volatile matter content of coal in residential combustion.