Seeded growth of large single-crystal copper foils with high-index facets.

The production of large single-crystal metal foils with various facet indices has long been a pursuit in materials science owing to their potential applications in crystal epitaxy, catalysis, electronics and thermal engineering1-5. For a given metal, there are only three sets of low-index facets ({100}, {110} and {111}). In comparison, high-index facets are in principle infinite and could afford richer surface structures and properties. However, the controlled preparation of single-crystal foils with high-index facets is challenging, because they are neither thermodynamically6,7 nor kinetically3 favourable compared to low-index facets6-18. Here we report a seeded growth technique for building a library of single-crystal copper foils with sizes of about 30 × 20 square centimetres and more than 30 kinds of facet. A mild pre-oxidation of polycrystalline copper foils, followed by annealing in a reducing atmosphere, leads to the growth of high-index copper facets that cover almost the entire foil and have the potential of growing to lengths of several metres. The creation of oxide surface layers on our foils means that surface energy minimization is not a key determinant of facet selection for growth, as is usually the case. Instead, facet selection is dictated randomly by the facet of the largest grain (irrespective of its surface energy), which consumes smaller grains and eliminates grain boundaries. Our high-index foils can be used as seeds for the growth of other Cu foils along either the in-plane or the out-of-plane direction. We show that this technique is also applicable to the growth of high-index single-crystal nickel foils, and we explore the possibility of using our high-index copper foils as substrates for the epitaxial growth of two-dimensional materials. Other applications are expected in selective catalysis, low-impedance electrical conduction and heat dissipation.

Precursor-mediated in situ growth of hierarchical N-doped graphene nanofibers confining nickel single atoms for CO2 electroreduction.

Despite the various strategies for achieving metal-nitrogen-carbon (M-N-C) single-atom catalysts (SACs) with different microenvironments for electrochemical carbon dioxide reduction reaction (CO2RR), the synthesis-structure-performance correlation remains elusive due to the lack of well-controlled synthetic approaches. Here, we employed Ni nanoparticles as starting materials for the direct synthesis of nickel (Ni) SACs in one spot through harvesting the interaction between metallic Ni and N atoms in the precursor during the chemical vapor deposition growth of hierarchical N-doped graphene fibers. By combining with first-principle calculations, we found that the Ni-N configuration is closely correlated to the N contents in the precursor, in which the acetonitrile with a high N/C ratio favors the formation of Ni-N3, while the pyridine with a low N/C ratio is more likely to promote the evolution of Ni-N2. Moreover, we revealed that the presence of N favors the formation of H-terminated edge of sp2 carbon and consequently leads to the formation of graphene fibers consisting of vertically stacked graphene flakes, instead of the traditional growth of carbon nanotubes on Ni nanoparticles. With a high capability in balancing the *COOH formation and *CO desorption, the as-prepared hierarchical N-doped graphene nanofibers with Ni-N3 sites exhibit a superior CO2RR performance compared to that with Ni-N2 and Ni-N4 ones.

Composition and phase engineering of metal chalcogenides and phosphorous chalcogenides.

Two-dimensional (2D) materials with multiphase, multielement crystals such as transition metal chalcogenides (TMCs) (based on V, Cr, Mn, Fe, Cd, Pt and Pd) and transition metal phosphorous chalcogenides (TMPCs) offer a unique platform to explore novel physical phenomena. However, the synthesis of a single-phase/single-composition crystal of these 2D materials via chemical vapour deposition is still challenging. Here we unravel a competitive-chemical-reaction-based growth mechanism to manipulate the nucleation and growth rate. Based on the growth mechanism, 67 types of TMCs and TMPCs with a defined phase, controllable structure and tunable component can be realized. The ferromagnetism and superconductivity in FeXy can be tuned by the y value, such as superconductivity observed in FeX and ferromagnetism in FeS2 monolayers, demonstrating the high quality of as-grown 2D materials. This work paves the way for the multidisciplinary exploration of 2D TMPCs and TMCs with unique properties.

The Transfer Dehydrogenation Method Enables a Family of High Crystalline Benzimidazole-linked Cu (II)-phthalocyanine-based Covalent Organic Frameworks Films.

Heterocycle-linked phthalocyanine-based COFs with close-packed π-π conjugated structures are a kind of material with intrinsic electrical conductivity, and they are considered to be candidates for photoelectrical devices. Previous studies have revealed their applications for energy storage, gas sensors, and field-effect transistors. However, their potential application in photodetector is still not fully studied. The main difficulty is preparing high-quality films. In our study, we found that our newly designed benzimidazole-linked Cu (II)-phthalocyanine-based COFs (BICuPc-COFs) film can hardly formed with a regular aerobic oxidation method. Therefore, we developed a transfer dehydrogenation method with N-benzylideneaniline (BA) as a mild reagent. With this in hand, we successfully prepared a family of high crystalline BICuPc-COFs powders and films. Furthermore, both of these new BICuPc-COFs films showed high electrical conductivity (0.022-0.218 S/m), higher than most of the reported COFs materials. Due to the broad absorption and high conductivity of BICuPc-COFs, synaptic devices with small source-drain voltage (VDS=1 V) were fabricated with response light from visible to near-infrared. Based on these findings, we expect this study will provide a new perspective for the application of conducting heterocycle-linked COFs in synaptic devices.

Strategies, Status, and Challenges in Wafer Scale Single Crystalline Two-Dimensional Materials Synthesis.

The successful exfoliation of graphene has given a tremendous boost to research on various two-dimensional (2D) materials in the last 15 years. Different from traditional thin films, a 2D material is composed of one to a few atomic layers. While atoms within a layer are chemically bonded, interactions between layers are generally weak van der Waals (vdW) interactions. Due to their particular dimensionality, 2D materials exhibit special electronic, magnetic, mechanical, and thermal properties, not found in their 3D counterparts, and therefore they have great potential in various applications, such as 2D materials-based devices. To fully realize their large-scale practical applications, especially in devices, wafer scale single crystalline (WSSC) 2D materials are indispensable. In this review, we present a detailed overview on strategies toward the synthesis of WSSC 2D materials while highlighting the recent progress on WSSC graphene, hexagonal boron nitride (hBN), and transition metal dichalcogenide (TMDC) synthesis. The challenges that need to be addressed in future studies have also been described. In general, there have been two distinct routes to synthesize WSSC 2D materials: (i) allowing only one nucleus on a wafer scale substrate to be formed and developed into a large single crystal and (ii) seamlessly stitching a large number of unidirectionally aligned 2D islands on a wafer scale substrate, which is generally single crystalline. Currently, the synthesis of WSSC graphene has been realized by both routes, and WSSC hBN and MoS2 have been synthesized by route (ii). On the other hand, the growth of other WSSC 2D materials and WSSC multilayer 2D materials still remains a big challenge. In the last section, we wrap up this review by summarizing the future challenges and opportunities in the synthesis of various WSSC 2D materials.

Near-Equilibrium Growth of Chemically Stable Covalent Organic Framework/Graphene Oxide Hybrid Materials for the Hydrogen Evolution Reaction.

Facile synthesis and post-processing of covalent organic frameworks (COFs) under mild synthetic conditions are highly sought after and important for widespread utilizations in catalysis and energy storage. Here we report the synthesis of the chemically stable aza-fused COFs BPT-COF and PT-COF by a liquid-phase method. The process involves the spontaneous polycondensation of vicinal diamines and vicinal diketones, and is driven by the near-equilibrium growth of COF domains at a very low monomer concentration. The method permits in situ assembly of COFs and COF-GO hybrid materials and leads to the formation of a uniform conducting film on arbitrary substrates on vacuum filtration. When used as electrocatalysts, the as-prepared membranes show a fast hydrogen evolution reaction (HER) with a low overpotential (45 mV at 10 mA cm-2 ) and a small Tafel slope (53 mV dec-1 ), which are the best among metal-free catalysts. Our results may open a new route towards the preparation of highly π-conjugated COFs for multifunctional applications.

Growth and Selective Etching of Twinned Graphene on Liquid Copper Surface.

Although grain boundaries (GBs) in two-dimensional (2D) materials have been extensively observed and characterized, their formation mechanism still remains unexplained. Here a general model has reported to elucidate the mechanism of formation of GBs during 2D materials growth. Based on our model, a general method is put forward to synthesize twinned 2D materials on a liquid substrate. Using graphene growth on liquid Cu surface as an example, the growth of twinned graphene has been demonstrated successfully, in which all the GBs are ultra-long straight twin boundaries. Furthermore, well-defined twin boundaries (TBs) are found in graphene that can be selectively etched by hydrogen gas due to the preferential adsorption of hydrogen atoms at high-energy twins. This study thus reveals the formation mechanism of GBs in 2D materials during growth and paves the way to grow various 2D nanostructures with controlled GBs.

Size-Dependent Phase Transformation of Noble Metal Nanomaterials.

As an important aspect of crystal phase engineering, controlled crystal phase transformation of noble metal nanomaterials has emerged as an effective strategy to explore novel crystal phases of nanomaterials. In particular, it is of significant importance to observe the transformation pathway and reveal the transformation mechanism in situ. Here, the phase transformation behavior of face-centered cubic (fcc) Au nanoparticles (fcc-AuNPs), adhering to the surface of 4H nanodomains in 4H/fcc Au nanorods, referred to as 4H-AuNDs, during in situ transmission electron microscopy imaging is systematically studied. It is found that the phase transformation is dependent on the ratio of the size of the monocrystalline nanoparticle (NP) to the diameter of 4H-AuND. Furthermore, molecular dynamics simulation and theoretical modeling are used to explain the experimental results, giving a size-dependent phase transformation diagram which provides a general guidance to predict the phase transformation pathway between fcc and 4H Au nanomaterials. Impressively, this method is general, which is used to study the phase transformation of other metal NPs, such as Pd, Ag, and PtPdAg, adhering to 4H-AuNDs. The work opens an avenue for selective phase engineering of nanomaterials which may possess unique physicochemical properties and promising applications.

Advance in Close-Edged Graphene Nanoribbon: Property Investigation and Structure Fabrication.

The absence of dangling bonds in close-edged graphene nanoribbons (CEGNRs) confers upon them a series of fascinating properties, especially when compared with cylindrical carbon nanotubes and open-edged GNRs. Here, the configuration of CEGNRs is described, followed by the structure-related properties, including mechanical, thermal, electrical, optical, and magnetic properties. Based on the unique structures and extraordinary properties, their potential applications in a variety of fields, such as field-effect transistors, energy suppliers, nanoactuators, and fibers, are discussed. Remarkably, the strategies applied for generating CEGNRs, mainly from the collapse of carbon nanotubes and graphene tubes, are depicted in detail. Finally, the prospects in the research area of CEGNRs are proposed.

Formation of Twinned Graphene Polycrystals.

Liquid metals have been widely used as substrates to grow graphene and other 2D materials. On a homogeneous and isotropic liquid surface, a polycrystalline 2D material is formed by coalescence of many randomly nucleated single-crystal islands, and as a result, the domains in a polycrystal are expected to be randomly aligned. Here, we report the unexpected finding that only 30°-twinned graphene polycrystals are grown on a liquid Cu surface. Atomic simulations confirm that the unique domain alignment in graphene polycrystals is due to the free rotation of graphene islands on the liquid Cu surface and the highly stable 30°-grain boundaries in graphene. In-depth analysis predicts 30 types of possible 30°-twinned graphene polycrystals and 27 of them are observed. The revealed formation mechanism of graphene polycrystals on a liquid Cu surface deepens our fundamental understanding on polycrystal growth and could serve as a guideline for the controlled synthesis of 2D materials.

What Drives Metal-Surface Step Bunching in Graphene Chemical Vapor Deposition?

Compressive strain relaxation of a chemical vapor deposition (CVD) grown graphene overlayer has been considered to be the main driving force behind metal surface step bunching (SB) in CVD graphene growth. Here, by combining theoretical studies with experimental observations, we prove that the SB can occur even in the absence of a compressive strain, is enabled by the rapid diffusion of metal adatoms beneath the graphene and is driven by the release of the bending energy of the graphene overlayer in the vicinity of steps. Based on this new understanding, we explain a number of experimental observations such as the temperature dependence of SB, and how SB depends on the thickness of the graphene film. This study also shows that SB is a general phenomenon that can occur in all substrates covered by films of two-dimensional (2D) materials.

The formation and stability of junctions in single-wall carbon nanotubes.

The structure and stability of molecular junctions, which connect two single-wall carbon nanotubes (SWCNTs) of different diameters and chiral angles, (n 1, m 1)-(n 2, m 2), are systematically investigated by density functional tight binding calculations. More than 100 junctions, which connect well-aligned SWCNTs, were constructed and calculated. For a highly stable junction between two chiral (n 1, m 1) and (n 2, m 2) SWCNTs with opposite handedness, the number of pentagon-heptagon (5/7) pairs required to build the junction can be denoted as ∣∣n 2 - n 1∣ - âˆ£m 2 - m 1∣∣+min{∣n 2 - n 1∣, ∣m 2 - m 1∣} with (n 2, m 2) rotating π/3 angle or not. While for a junction connected by two zigzag, armchair or two chiral SWCNTs with the same handedness, the number of 5/7 pairs is equal to ∣n 1 - n 2∣ + âˆ£m 1 - m 2∣. Similar to the formation energies of grain boundaries in graphene, the curve of the formation energies vs. chiral angle difference present an 'M' shape indicating the preference of ∼30 degree junctions. Moreover, the formation energies of the zigzag-type and armchair-type junctions with zero misorientation angles are largely sensitive to the diameter difference of two sub-SWCNTs.

Edge-Controlled Growth and Etching of Two-Dimensional GaSe Monolayers.

Understanding the atomistic mechanisms governing the growth of two-dimensional (2D) materials is of great importance in guiding the synthesis of wafer-sized, single-crystalline, high-quality 2D crystals and heterostructures. Etching, in many cases regarded as the reverse process of material growth, has been used to study the growth kinetics of graphene. In this work, we explore a growth-etching-regrowth process of monolayer GaSe crystals, including single-crystalline triangles and irregularly shaped domains formed by merged triangles. We show that the etching begins at a slow rate, creating triangular, truncated triangular, or hexagonally shaped holes that eventually evolve to exclusively triangles that are rotated 60° with respect to the crystalline orientation of the monolayer triangular crystals. The regrowth occurs much faster than etching, reversibly filling the etched holes and then enlarging the size of the monolayer crystals. A theoretical model developed based on kinetic Wulff construction (KWC) theory and density functional theory (DFT) calculations accurately describe the observed morphology evolution of the monolayer GaSe crystals and etched holes during the growth and etching processes, showing that they are governed by the probability of atom attachment/detachment to/from different types of edges with different formation energies of nucleus/dents mediated by chemical potential difference Δµ between Ga and Se. Our growth-etching-regrowth study provides not only guidance to understand the growth mechanisms of 2D binary crystals but also a potential method for the synthesis of large, shape-controllable, high-quality single-crystalline 2D crystals and their lateral heterostructures.

Multifunctional heterostructures constructed using MoS2 and WS2 nanoribbons.

Using first-principles calculations based on nonequilibrium Green's function together with density functional theory, we investigated the electronic transport properties of some devices consisting of armchair and zigzag MoS2NRs/WS2NRs in-plane heterostructures. The results indicate that these heterostructures exhibit rectifying performance, which are depressed as the number of WS2NR unit cell decreases. In addition, the NDR effect is observed and can be modulated. Importantly, the zigzag MoS2NRs/WS2NRs heterostructures can be used as spintronic devices because of their tunable spin filtering behavior and NDR effect. The devices with WS2NRs electrode display a better NDR effect and spin filtering behavior. The unique properties of these heterostructures suggest promising applications in the next generation nanoelectronic devices.

Evolution of domains and grain boundaries in graphene: a kinetic Monte Carlo simulation.

To understand the mystery of preferential mismatching angle of grain boundaries (GB) in multi-crystalline graphene observed experimentally, a systematic kinetic Monte Carlo simulation is designed to explore how a two-dimensional amorphous carbon system evolves into graphene domains and GBs. The details of the evolution, including the graphene domain nucleation, growth, rotation, coalescence, the corresponding GB motion, rotation and elimination, are observed. One hundred individual simulations with different initial configurations are performed and our simulation confirms that it is the Stone-Wales (SW) transformation that dominates the GB fast annealing process, and the results show that graphene domains with small angle GBs (<10°) tend to be annihilated but those with medium angles (>15°) tend to become large angle (≈30°), which is a consequence of the fact that the formation energies of GBs have two minima at 0° and 30°. The behavior of the formation energies is also responsible for the distribution of GBs' mismatch angles obtained by our simulations, which is very similar to those broadly observed experimentally.

Electronic transport properties of ultra-thin Ni and Ni-C nanowires.

The structures and electronic transport properties of ultra-thin Ni and Ni-C nanowires obtained from carbon nanotube (CNT) templates are theoretically investigated. C atoms tend to locate at the central positions of nanowires and are surrounded by Ni atoms. Spin polarization at the Fermi level is not responsible for the spin filtration of these nanowires. Increasing C concentration can improve the resistance of nanowires by abating the number of electronic transmission channels and the coupling of electron orbitals between Ni atoms. Moreover, with the increase of diameter, the conductance of these nanowires increases as well. This study is helpful for guiding the synthesis of nanowires with desired applications.

Substrate Screening for the Epitaxial Growth of a Single-Crystal Graphene Wafer.

Epitaxial growth of a two-dimensional (2D) single crystal necessitates the symmetry group of the substrate being a subgroup of that of the 2D material. As a consequence of the theory of 2D material epitaxy, high-index surfaces, which own very low symmetry, have been successfully used to grow various 2D single crystals, while the rule of selecting the best substrates for 2D single crystal growth is still absent. Here, extensive density functional theory calculations were conducted to investigate the growth of graphene on abundant high-index Cu substrates. Although step edges are commonly regarded as the most active sites for graphene nucleation, our study reveals that, in some cases, graphene nucleation on terraces is superior than that near a step edge. To achieve parallel alignments of graphene islands, it is essential to either suppress terrace nucleation or ensure consistent orientations templated by both the terrace and step edge. In agreement with most experimental observations, we show that Cu substrates for the growth of single-crystalline graphene include vicinal Cu(111) surfaces, vicinal Cu(110) surfaces with Miller indices of (nn1) (n > 3), and vicinal Cu(100) surfaces with Miller indices of (n11) (n > 3).

Synthesis and Modulation of Low-Dimensional Transition Metal Chalcogenide Materials via Atomic Substitution.

In recent years, low-dimensional transition metal chalcogenide (TMC) materials have garnered growing research attention due to their superior electronic, optical, and catalytic properties compared to their bulk counterparts. The controllable synthesis and manipulation of these materials are crucial for tailoring their properties and unlocking their full potential in various applications. In this context, the atomic substitution method has emerged as a favorable approach. It involves the replacement of specific atoms within TMC structures with other elements and possesses the capability to regulate the compositions finely, crystal structures, and inherent properties of the resulting materials. In this review, we present a comprehensive overview on various strategies of atomic substitution employed in the synthesis of zero-dimensional, one-dimensional and two-dimensional TMC materials. The effects of substituting elements, substitution ratios, and substitution positions on the structures and morphologies of resulting material are discussed. The enhanced electrocatalytic performance and photovoltaic properties of the obtained materials are also provided, emphasizing the role of atomic substitution in achieving these advancements. Finally, challenges and future prospects in the field of atomic substitution for fabricating low-dimensional TMC materials are summarized.

Self-condensation-assisted chemical vapour deposition growth of atomically two-dimensional MOF single-crystals.

Two-dimensional metal-organic frameworks (MOFs) have a wide variety of applications in molecular separation and other emerging technologies, including atomically thin electronics. However, due to the inherent fragility and strong interlayer interactions, high-quality MOF crystals of atomic thickness, especially isolated MOF crystal monolayers, have not been easy to prepare. Here, we report the self-condensation-assisted chemical vapour deposition growth of atomically thin MOF single-crystals, yielding monolayer single-crystals of poly[Fe(benzimidazole)2] up to 62 µm in grain sizes. By using transmission electron microscopy and high-resolution atomic force microscopy, high crystallinity and atomic-scale single-crystal structure are verified in the atomically MOF flakes. Moreover, integrating such MOFs with MoS2 to construct ultrathin van der Waals heterostructures is achieved by direct growth of atomically MOF single-crystals onto monolayer MoS2, and enables a highly selective ammonia sensing. These demonstrations signify the great potential of the method in facilitating the development of the fabrication and application of atomically thin MOF crystals.

Biomimetic nanocluster photoreceptors for adaptative circular polarization vision.

Nanoclusters with atomically precise structures and discrete energy levels are considered as nanoscale semiconductors for artificial intelligence. However, nanocluster electronic engineering and optoelectronic behavior have remained obscure and unexplored. Hence, we create nanocluster photoreceptors inspired by mantis shrimp visual systems to satisfy the needs of compact but multi-task vision hardware and explore the photo-induced electronic transport. Wafer-scale arrayed photoreceptors are constructed by a nanocluster-conjugated molecule heterostructure. Nanoclusters perform as an in-sensor charge reservoir to tune the conductance levels of artificial photoreceptors by a light valve mechanism. A ligand-assisted charge transfer process takes place at nanocluster interface and it features an integration of spectral-dependent visual adaptation and circular polarization recognition. This approach is further employed for developing concisely structured, multi-task, and compact artificial visual systems and provides valuable guidelines for nanocluster neuromorphic devices.