Analysis of Biofilm Adhesion on CAD/CAM Lithium Disilicates Under Different Types of Intraoral Polishing.

PURPOSE: To evaluate the adhesion of Streptococcus mutans (S. mutans) on lithium disilicate ceramics, submitted to different intraoral polishing protocols, and the degree of surface smoothness obtained. MATERIALS AND METHODS: Fifty lithium disilicate specimens were divided into 5 groups (n=10): G1-Glaze Group (positive control); G2-Glaze Group + Wear + Glaze; G3-Wear Group (negative control); G4-Ceramisté Wear Group; G5-Optrafine Wear Group. Surface roughness (Ra - µm) was evaluated and the surface characteristics were assessed using a scanning electron microscope (SEM); to assess S. mutans biofilm, the number of cultured cells was evaluated by counting colony-forming units (CFU/mL). The data underwent one-way ANOVA followed by Tukey's test (P⟨.05). RESULTS: There was a significant difference in the surface roughness of all groups compared with G3. There was no significant difference between the G4 and G5 groups that received polishing. G1 group had the lowest mean roughness values. There was a difference in Log values (CFU/mL) between the G3 group and the groups that received glaze (G1 and G2). The G3 group had the highest adhesion of S. mutans (4.53 Log). CONCLUSION: The most effective polishing protocol after wear is glazing, presenting the lowest roughness and CFU/mL values.

Subsampled digital holographic image reconstruction by a compressive sensing approach.

We show an in-line digital holographic image reconstruction from subsampled holograms with resolution improvement and lensless magnification with high noise immunity by a compressive sensing approach. Our method treats the sensed field as subsampled, low-pass filtered and projected on a Fresnel-Bluestein base in an inverse problem approach to image reconstruction with controlled lensless magnification. So, we have demonstrated by simulation and experimental results that the approach can reconstruct images with quality even when used in holograms obtained from unusual subsampling schemes.

Estimation of statistical properties of rough surface profiles from the Hurst exponent of speckle patterns.

We applied the Hurst exponent technique to an experimental study of rough metallic surface profiles and the speckle patterns generated by them. Characterization of important statistical properties of the surface profile and speckle patterns were performed. We observed a clear correlation between the Hurst exponent of a surface profile and the one calculated from the associated speckle patterns. Therefore, in principle, information of the Hurst exponent of the profile can be obtained from the Hurst exponent of speckle patterns. Range and sampling analyses were performed in the Hurst exponent calculations showing the robustness of the method. As an additional application, we performed a basic simulation to show that the Hurst exponent is sensitive to surface waviness.

Influence of the Application and Light-Curing of Bonding Adhesives Inside Lithium Disilicate Ceramic Crowns.

This in vitro study evaluated the effect of the application and previous photoactivation of bonding adhesives in lithium disilicate ceramics. This was achieved by analyzing the bond strength of the cement-ceramic interface, nanohardness and elastic modulus of bonding adhesives and resin cements. The bonding adhesives used were Scotchbond Multi-Purpose (SBMP); Scotchbond Multi-Purpose light-cured (SBMP+LC); Single Bond 2 (SB2); Single Bond 2 light-cured (SB2+LC); Single Bond Universal (SBU) and Single Bond Universal light-cured (SBU+LC). After luting the ceramic in composite resin blocks, all specimens were subjected to 10,000 thermocycles. Sticks were obtained for the microtensile bonding strength test and the nanohardness and elastic modulus of the bonding adhesive and resin cements. Data were submitted to one-way ANOVA and Fishers tests (α =0.05). The results indicated that the bonding strength and mechanical properties were influenced by the interaction of the bonding adhesive and resin cement. For the mechanical properties analyzed, no statistically significant differences were observed between the groups. Single Bond Universal was the only system that was effective with or without previous light activation. For the other adhesive systems, Scotchbond Multi- Purpose and Single Bond 2, the previous light activation was necessary to optimize the bonding strength of the adhesive interface.

Effect of photopolymerized glaze application on bacterial adhesion on ocular acrylic resin surfaces submitted to accelerated ageing.

Conditions of the acrylic resin (AR) surface, such as roughness, can promote a favourable environment for the adhesion of micro-organisms, even on the surface of ocular prostheses. This study evaluated the influence of photopolymerized glaze application on the roughness of ARs and adhesion of Staphylococcus aureus and Staphylococcus epidermidis on ocular AR surfaces submitted to accelerated ageing. Two hundred and eighty-eight samples of white colour (N1) and colourless ARs were distributed in eight groups (n = 9), based on surface treatments (glaze or ARs submitted to only a final polishing), accelerated ageing (before and after) and periods of microbial growth (24- and 48-h). The roughness average (Ra) and total height of roughness profile (Rt) values were greater for the groups with glaze and increased for all groups after ageing. The microbial adhesion among the groups with and without glaze did not present a statistically significant difference. The ageing did not statistically affect the adhesion of Staph. epidermidis, but affected the adhesion of Staph. aureus, which presented an increase after 24 h of growth on only N1 AR with glaze. These results demonstrate that the glaze did not contribute to adhesion of Staph. aureus and Staph. epidermidis, which are responsible for most ocular prosthetic infections. SIGNIFICANCE AND IMPACT OF THE STUDY: Some recent evidence suggested that the surface finish of ocular prostheses influences the accumulation of deposits that can affect the interaction with pathogenic bacteria, increasing the probability of infections. In addition, surface deterioration over time can increase the roughness and, consequently, biofilm formation. Thus, a better understanding of the influence of surface finish on bacterial adhesion becomes extremely important. In this study, we tested a glaze for surface polishing compared to mechanical polishing, before and after ageing. The results suggest that the glaze did not contribute to microbial adhesion and might be useful in preventing possible prosthetic infections.

Low-Cost Interrogation System for Long-Period Fiber Gratings Applied to Remote Sensing.

We present a portable and low-cost system for interrogation of long-period fiber gratings (LPFGs) costing around a 30th of the price of a typical setup using an optical spectrum analyzer and a broadband light source. The unit is capable of performing real-time monitoring or as a stand-alone data-logger. The proposed technique uses three thermally modulated fiber-coupled laser diodes, sweeping a few nanometers around their central wavelength. The light signal is then modulated by the LPFG and its intensity is acquired by a single photo-detector. Through curve-fitting algorithms the sensor transmission spectrum is reconstructed. Testing and validation were accomplished by inducing variations in the spectral features of an LPFG through changes either in external air temperature from 22 to 425 °C or in refractive index (RI) of the surrounding medium from 1.3000 to 1.4240. A dynamic resolution between 3.5 and 1.9 °C was achieved, in temperatures from 125 to 325 °C. In RI measurements, maximum wavelength and optical power deviations of 2.75 nm and 2.86 dB, respectively, were obtained in the range from 1530 to 1570 nm. The worse RI resolution obtained was 3.47 × 10 - 3 . The interrogation platform was then applied in the detection of iron corrosion, expressing wavelength peak values within 1.12 nm from the real value in the region between 1530 and 1570 nm.

Recording and erasure of photorefractive holograms in undoped BTO crystal at moderate to high intensities of 639.7 nm laser under action of 532 nm laser pre-illumination.

We investigate recording and erasure of photorefractive holographic gratings in an undoped Bi12TiO20 crystal in a moderate to high intensity regime of the recording beams at 639.7 nm without and with the action of laser pre-illumination at 532 nm. The detected hologram without pre-illumination indicates the participation of two photorefractive electronic gratings in its recording process, and the diffracted signal by itself exhibits a fivefold enhancement when the total intensity increases from 38.4 to 214.5 mW/cm2. The dependence of the measured total diffraction efficiency on intensity was investigated and showed linear behavior. At least three gratings are present in the regime of pre-illumination and participate in the writing and erasure of holographic mechanisms. Two of them are electronic, and one is hole-based, with a phase difference of Δϕ between them. The theoretical approach used to analyze the total diffraction efficiency based upon the photorefractivity standard model, and considering the presence of the three gratings, showed good agreement with the holographic erasure experimental data and permitted us to compute Δϕ, which exhibited strong and unusual dependence on the total intensity.

Evaluating internal and external markers versus fecal sampling procedure interactions when estimating intake in dairy cows consuming a corn silage-based diet.

Feed intake assessment is a valuable tool for herd management decisions. The use of markers, either internal or external, is currently the most used technique for estimating feed intake in production animals. The experiment used 10 multiparous Holstein cows fed a corn silage-based diet, with 55:45 forage-to-concentrate ratio, the average fecal recovery (FR) of TiO2 was higher than FR of Cr2O3, and both FR were more than unity. With internal markers, acetyl bromide lignin and cutin FR were lower than unity, and average FR for indigestible neutral detergent fiber (iNDF) and indigestible acid detergent fiber (iADF) was 1.5. The FR was unaffected by the fecal sampling procedure and appears to be an intrinsic property of each molecule and how it interacts with digesta. Of the 2 external markers, only Cr2O3 produced accurate fecal output (FO) estimates and the same happened to dry matter digestibility (DMD) when iNDF and iADF were used. Estimates for DMD and FO were affected by sampling procedure; 72-h bulk [sub-sample from total feces collection (TFC)] sampling consistently produced accurate results. The grab (sub-samples taken at specific times during the day) sampling procedures were accurate when using either of the indigestible fibers (iNDF or iADF) to estimate DMD. However, grab sampling procedures can only be recommended when concomitant TFC is performed on at least one animal per treatment to determine FR. Under these conditions, Cr2O3 is a suitable marker for estimating FO, and iNDF and iADF are adequate for estimating DMD. Moreover, the Cr2O3+iADF marker pair produces accurate dry matter intake estimates and deserves further attention in ruminant nutrition studies. The method of dosing the external markers is extremely important and greatly affects and determines results. Whichever the method, it must allow the animals to display normal feeding behavior and not affect performance. The grab sampling procedures can replace TFC (once FR is established), which may open new possibilities for pasture-based or collectively housed animals.

Distinct Roles of Th17 and Th1 Cells in Inflammatory Responses Associated with the Presentation of Paucibacillary Leprosy and Leprosy Reactions.

It is well established that helper T cell responses influence resistance or susceptibility to Mycobacterium leprae infection, but the role of more recently described helper T cell subsets in determining severity is less clear. To investigate the involvement of Th17 cells in the pathogenesis of leprosy, we determined the immune profile with variant presentations of leprosy. Firstly, IL-17A, IFN-γ and IL-10 were evaluated in conjunction with CD4+ T cell staining by confocal microscopy of lesion biopsies from tuberculoid (TT) and lepromatous leprosy (LL) patients. Secondly, inflammatory cytokines were measured by multiplex assay of serum samples from Multibacillary (MB, n = 28) and Paucibacillary (PB, n = 23) patients and household contacts (HHC, n = 23). Patients with leprosy were also evaluated for leprosy reaction occurrence: LR+ (n = 8) and LR- (n = 20). Finally, peripheral blood mononuclear cells were analysed by flow cytometry used to determine the phenotype of cytokine-producing cells. Lesions from TT patients were found to have more CD4+ IL-17A+ cells than those from LL patients. Higher concentrations of IL-17A and IL-1ß were observed in serum from PB than MB patients. The highest serum IFN-γ concentrations were, however, detected in sera from MB patients that developed leprosy reactions (MB LR+ ). Together, these results indicate that Th1 cells were associated with both the PB presentation and also with leprosy reactions. In contrast, Th17 cells were associated with an effective inflammatory response that is present in the PB forms but were not predictive of leprosy reactions in MB patients.

Photorefractive moiré-like patterns for the multifringe projection method in Fourier transform profilometry.

In the present paper, the method of simultaneous moiré-like fringe pattern projection for Fourier transform profilometry is described. The photorefractive holographic interferometric process produces controlled moiré-like patterns with two or more different variation directions. Each low spatial frequency fringe pattern is experimentally obtained as a result of the superposition of two high spatial frequency sinusoidal gratings, with slightly different pitches, for each fringe variation direction. These dynamic moiré-like patterns are induced due to an optical holographic beating of the sinusoidal induced gratings in the volume of the photorefractive Bi12TiO20 (BTO) crystal sample used as dynamic holographic medium. Two or more moiré-like fringe patterns, with at least two different variation directions, simultaneously (or not), are projected onto the object surface. Thus, this is the 2D fringe projection stage of our proposed Fourier transform procedure to determine the profile of a simple object.

Branch-cut algorithm for optical phase unwrapping.

In this Letter, a proposal addressing the problem of two-dimensional phase unwrapping based on the theory of residues is presented. Here, wrapped phase maps with shifted phase jumps are used to balance residue charges. With this approach, we seek to minimize processing time and residue connection, which is essential in the development of branch-cut algorithms. Finally, a phase-unwrapping algorithm is applied to these wrapped maps, generated by Fourier transform profilometry to obtain three-dimensional profiles of objects illuminated by photorefractive moiré-like patterns generated in an experiment of real-time dynamic holography, and by fringe patterns generated with a Michelson interferometer.

Alteration of the serum biomarker profiles of visceral leishmaniasis during treatment.

Until recently, chemotherapy for visceral leishmaniasis (VL; also known as kala-azar) was severely limited by factors such as high cost, route of administration, generation of side effects and potential for resistance. Although largely effective, chemotherapies have become available with the introduction of new drugs and multi-drug regimens for VL. These could be further improved by the identification of biomarkers that are altered during effective treatment. The identification of such biomarkers in the circulation would also simplify efficacy trials. In this study, we determined immunological signatures within the serum of ethnically and geographically distinct VL patients (from Bangladesh and Brazil). Our results indicate that inflammatory and regulatory cytokines (IFNγ, TNFα, IL-10, IL-17), as well as levels of growth factors (FGF, VEGF), are elevated within the serum of VL patients from these sites. The examination of samples from Brazilian VL patients during and beyond standard treatment with meglumine antimoniate identified multiple parameters that revert to levels comparable to those of healthy endemic control individuals. The consolidation of these results provides a 'response to treatment' signature that could be used within efficacy trials to rapidly and simply determine successful interruption of VL.

Thermodynamics of the Eu(III)-Mg-SO4-H2O and Eu(III)-Na-SO4-H2O systems. Part I: solubility experiments and the full dissociation Pitzer model.

The solubility of Eu(III) was investigated under undersaturated conditions in acidic, dilute to concentrated MgSO4 and Na2SO4 solutions at T = (22 ± 2) °C. After attaining equilibrium conditions, solid phases were characterized by a multi-method approach, including X-ray diffraction (XRD), Raman and infrared (IR) spectroscopy, quantitative chemical analysis (ICP-OES) and thermogravimetric analysis (TG-DTA). A total of 45 solubility samples were investigated for the systems Eu2(SO4)3-MgSO4-H2O (19 samples) and Eu2(SO4)3-Na2SO4-H2O (26 samples). Eu2(SO4)3·8H2O(cr) was found to control the solubility of Eu(III) in all investigated MgSO4 solutions, as well as in dilute Na2SO4 systems. The transformation of Eu2(SO4)3·8H2O(cr) into the double salt Na2Eu2(SO4)4·2H2O(cr) was observed at mNa2SO4 > 0.01 mol kg-1. The latter phase is characterized by significantly lower solubility. Based on these experimental solubility measurements, thermodynamic and activity models were proposed based on the Pitzer equations considering the full dissociation of the Eu(III) species in MgSO4 and Na2SO4 aqueous solutions, i.e. deliberately excluding Eu(III)-sulfate complex formation. A combination of the geochemical calculation code PhreeSCALE and the parameter estimation code PEST was used to determine the values of solubility products and binary and ternary specific interaction parameters (ß(0)ij, ß(1)ij, Cϕij, θik, Ψijk).

Thermodynamics of the Eu(III)-Mg-SO4-H2O and Eu(III)-Na-SO4-H2O systems. Part II: spectroscopy experiments, complexation and Pitzer/SIT models.

A time-resolved laser fluorescence spectroscopy (TRLFS) study was carried out to investigate the Eu(III)-SO4 complexation at room temperature over a wide range of Na2SO4 concentrations (0-2 mol kg-1). Spectroscopic observations confirm the step-wise formation of the aqueous complexes Eu(SO4)+, Eu(SO4)2- and Eu(SO4)33- over the investigated Na2SO4 concentrations. Combining TRLFS data obtained in this study and solubility data reported in Part I of this work for the Eu2(SO4)3-Na2SO4-H2O and Eu2(SO4)3-MgSO4-H2O systems, thermodynamic and activity models were derived based on the SIT and Pitzer formalisms. A combination of the geochemical calculation codes PhreeqC (SIT), PhreeSCALE (Pitzer) and the parameter estimation code PEST was used to determine the solubility products of Eu2(SO4)3·8H2O(cr) and Na2Eu2(SO4)4·2H2O(cr), stability constants of the Eu(III)-SO4 complexes (ß0i), and the specific binary and ternary interaction parameters (εij, ß(0)ij, ß(1)ij, Cϕij, θik, Ψijk) for both activity models. The thermodynamic constants determined in this work are discussed with reference to values available in the literature.

Inorganic Phosphate Effect in a Hydrogen Peroxide-based Bleaching Agent: Physicochemical, Mechanical, and Morphological Properties of Dental Enamel.

OBJECTIVES: This in vitro study aimed to assess the impact of incorporating calcium glycerophosphate (CaGP) and sodium fluoride (NaF) in addition to 35% hydrogen peroxide concerning the enamel mechanical and morphological properties. METHODS: Specimens of bovine enamel were chosen based on their initial surface hardness (SHi) and subsequently divided into five gel groups (n=12): 1) 35% Hydrogen Peroxide (HP) Gel; 2) HP + 0.1% NaF Gel (HP/NaF); 3) HP + 0.25% CaGP Gel (HP/CaGP); 4) HP + 0.1% NaF + 0.25% CaGP Gel (HP/NaF/CaGP) and 5) HP Blue 35% Gel (HP Blue). The bleaching gels were applied thrice, for 40 min, at intervals of 7 days each. After 21 days, the final surface hardness (SHf), integrated hardness (IH), Polydispersity Index (PdI) and Zeta Potential (Zp), surface roughness (Ra, after and before), and surface/structural analysis by Scanning Electron Microscopy (SEM) were determined. The data were submitted to ANOVA (one-way and two-way) followed by the Student-Newman-Keuls test (α=0.05). RESULTS: The addition of NaF to HP reduced demineralization by 11.5% in relation to HP (p<0.05). The NaF/CaGP association reduction is 22.8 and 20% higher in comparison to HP/NaF/CaGP and HP Blue, respectively. The IH when the PH/NaF/CaGP bleaching gel was applied, was 14% higher compared to HP and HP Blue groups. CONCLUSIONS: It can be concluded that the association of NaF and CaGP with the 35% hydrogen peroxide gel (HP/NaF/CaGP) significantly changed tooth enamel demineralization in terms of surface, depth, roughness, and enamel morphology.

The impact of sputum quality on Xpert positivity in active case-finding for TB.

BACKGROUND: Studies evaluating sputum quality and Xpert® MTB/RIF positivity in the context of active case finding are scarce. We aimed to determine whether sputum quality is associated with Xpert positivity and whether the association differed according to demographic and clinical characteristics.METHODS: A cross-sectional analysis using data from a mass screening programme in Brazilian prisons was conducted from 2017 to 2021. We administered a standardised questionnaire, obtained a chest X-ray and collected a spot sputum sample for Xpert testing. Sputum quality was classified as 'salivary', 'mucoid/mucopurulent' or 'blood-stained'. We used log binomial regressions to estimate the relationship between sputum quality and Xpert positivity, assessing interactions with participant characteristics.RESULTS: Among 4,368 participants for whom sputum quality was assessed, 957 (21.9%) produced salivary specimens, 3,379 (77.4%) had mucoid/mucopurulent sputum and 32 (0.7%) had blood-stained sputum. Xpert positivity was higher among those with mucoid/mucopurulent sputum than among those with salivary samples (12.0% vs. 3.7%). Mucopurulent sputum independently predicted Xpert positivity among individuals with and without symptoms, current smoking and abnormal chest radiographs on CAD4TB.CONCLUSIONS: In our study, sputum appearance independently predicted Xpert positivity, and could be used together with chest X-ray and symptom screening to inform use of Xpert in individual or pooled testing.

Photorefractive holographic moiré-like patterns for secure numerical code generation.

In this Letter, low-frequency photorefractive holographic moiré fringe patterns are proposed as secure numerical code generators that could be useful for storage or data transmission. These dynamic moiré patterns are holographically obtained by the superposition of two or more sinusoidal gratings with slightly different pitches. The Bi(12)TiO(20) photorefractive crystal sample is used as holographic medium. An optical numerical base was defined with patterns representing the 0, 1 and -1 digits as bits. Then, the complete set of these optical bits is combined to form bytes, where a numerical sequence is represented. The results show that the proposed numerical code is simple, robust and extremely secure, then could be used efficiently as standard numerical identification in robotic vision or eventually in storage or transmission of secure numerical data.

Effect of Antioxidant Agents After Dental Bleaching on Color Stability and Mechanical Properties of Bonding Interface Components in Ceramic Laminate Veneer Luting.

PURPOSE: Few studies have evaluated the influence of antioxidant agents on the optical and mechanical properties of ceramic laminate veneers after dental bleaching. Thus, this in vitro study aimed to evaluate the influence of antioxidant agents on the color stability and mechanical properties, such as nanohardness (HIT), elastic modulus (Eit*), and degree of conversion (DC) of the bonding interface components after dental bleaching in ceramic laminate veneer luting. METHODS AND MATERIALS: A total of 143 bovine teeth were distributed into experimental groups, according to the procedure method (unbleached or bleached with Whiteness HP Maxx 35%), antioxidant type (control, 10% ascorbic acid, or 10% α-tocopherol), and luting period (24 hours or 14 days) (n=13). The Tetric N-Bond Universal adhesive system and Variolink Esthetic LC resin cement were used as luting agents to lute IPS e.max ceramic restorations (0.6 mm in thickness) to enamel. A UV-visible spectrophotometer was used to assess color stability before and after UV-B artificial accelerated aging for 252, 504, and 756 hours (n=8). The HIT and Eit* of the adhesive and resin cement were measured using a nanohardness tester under a load of 1000 µN, and the DC was measured using a micro-Raman spectrometer (n=5). The color stability and mechanical properties were measured and evaluated by twoway and one-way ANOVA, respectively, and Tukey test (α=0.05). RESULTS: Distinct aging periods exerted significant changes on the color stability of the restorations luted in enamel associated with ascorbic acid, bleached and unbleached, and the bleached enamel under no antioxidant agent action, for the experimental groups evaluated after 14 days (p<0.05). The use of the α-tocopherol antioxidant solution after the bleaching process for 24 hours did not alter the optical and mechanical properties of the adhesive interface of the laminate restorations compared to those of the control group (p>0.05). CONCLUSION: The use of a 10% α-tocopherol antioxidant solution produced promising results, suggesting that it could be mediately used after tooth bleaching to lute ceramic laminate veneers.

[Report template from the German Society of Urology and the German Radiological Society for standardized, structured reporting of native computed tomography scans in the diagnosis of urinary stones]. / Befundvorlage der Deutschen Gesellschaft für Urologie e. V. und der Deutschen Röntgengesellschaft zur standardisierten strukturierten Befundung von nativen Computertomographien in der Harnsteindiagnostik.

Standardized structured radiological reporting (SSRB) has been promoted in recent years. The aims of SSRB include that reports be complete, clear, understandable, and stringent. Repetitions or superfluous content should be avoided. In addition, there are advantages in the presentation of chronological sequences, tracking and correlations with structured findings from other disciplines and also the use of artificial intelligence (AI)-based methods. The development of the presented template for SSRB of native computed tomography for urinary stones followed the "process for the creation of quality-assured and consensus-based report templates as well as subsequent continuous quality control and updating" proposed by the German Radiological Society (DRG). This includes several stages of drafts, consensus meetings and further developments. The final version was published on the DRG website ( www.befundung.drg.de ). The template will be checked annually by the steering group and adjusted as necessary. The template contains 6 organ domains (e.g., right kidney) for which entries can be made for a total of 21 different items, mostly with selection windows. If "no evidence of stones" is selected for an organ in the first query, the query automatically jumps to the next organ, so that the processing can be processed very quickly despite the potentially high total number of individual queries for all organs. The German, European, and North American Radiological Societies perceive the establishment of a standardized structured diagnosis of tomographic imaging methods not only in oncological radiology as one of the current central tasks. With the present template for the description of computed tomographic findings for urinary stone diagnostics, we are presenting the first version of a urological template. Further templates for urological diseases are to follow.