ÉquiNanos: innovative team for nanoparticle risk management.

Interactions between nanoparticles (NP), humans and the environment are not fully understood yet. Moreover, frameworks aiming at protecting human health have not been adapted to NP but are nonetheless applied to NP-related activities. Consequently, business organizations currently have to deal with NP-related risks despite the lack of a proven effective method of risk-management. To respond to these concerns and fulfill the needs of populations and industries, ÉquiNanos was created as a largely interdisciplinary provincial research team in Canada. ÉquiNanos consists of eight platforms with different areas of action, from adaptive decision-aid tool to public and legal governance, while including biological monitoring. ÉquiNanos resources aim at responding to the concerns of the Quebec nanotechnology industry and public health authorities. Our mandate is to understand the impact of NP on human health in order to protect the population against all potential risks emerging from these high-priority and rapidly expanding innovative technologies. FROM THE CLINICAL EDITOR: In this paper by Canadian authors an important framework is discussed with the goal of acquiring more detailed information and establishing an infrastructure to evaluate the interaction between nanoparticles and living organisms, with the ultimate goal of safety and risk management of the rapidly growing fields of nanotechnology-based biological applications.

Short, fine and WHO asbestos fibers in the lungs of quebec workers with an asbestos-related disease.

BACKGROUND: The possible role of short asbestos fibers in the development of asbestos-related diseases and availability of lung fiber burden data prompted this study on the relationships between fiber characteristics and asbestos-related diseases among compensated workers. METHODS: Data collected between 1988 and 2007 for compensation purposes were used; lung asbestos fibers content of 123 Quebec workers are described according to socio-demographic characteristics, job histories and diseases (asbestosis, mesothelioma, lung cancer). RESULTS: Most workers (85%) presented chrysotile fibers in their lungs, and respectively 76%, 64%, and 43% had tremolite, amosite, and crocidolite. Half of the total fibers were short, 30% were thin fibers and 20% corresponded to the World Health Organization definition of fibers (length ≥ 5 µm, diameter ≥ 0.2 and <3 µm). Chrysotile fibers were still observed in the lungs of workers 30 years or more after last exposure. CONCLUSION: Our findings stress the relevance of considering several dimensional criteria to characterize health risks associated with asbestos inhalation.

A New Sturgeon Herpesvirus from Juvenile Lake Sturgeon Acipenser fulvescens Displaying Epithelial Skin Lesions.

Herpesvirus infections of sturgeon pose a potential threat to sturgeon culture efforts worldwide. A new epitheliotropic herpesvirus named Acipenser herpesvirus 3 (AciHV-3) was detected in hatchery-reared Lake Sturgeon Acipenser fulvescens displaying skin lesions in central Canada. The growths were discovered in the fall, reached average prevalence levels of 0.2-40% and eventually regressed. No unusual mortality was observed. The cellular changes within the lesions included epithelial hyperplasia and were reminiscent of other herpesvirus infections. The virus was not evident in lesions examined by electron microscopy. Skin tissue homogenates from symptomatic sturgeon produced atypical cytopathic effects on a primary Lake Sturgeon cell line, and next-generation sequence analysis of the DNA samples revealed the presence of an alloherpesvirus. A new genotyping PCR assay targeting the major capsid protein sequence detected AciHV-3 in symptomatic Lake Sturgeon as well as other apparently healthy sturgeon species. Bayesian inference of phylogeny reconstructed with a concatenation of five alloherpesvirus core proteins revealed a new Alloherpesviridae lineage isomorphic with a new genus. The presence of AciHV-3 homologs in cell lines and sturgeon sequence datasets, low sequence divergence among these homologs and branching patterns within the genotyping phylogeny provide preliminary evidence of an endogenous virus lifestyle established in an ancestral sturgeon.

Bayesian estimation of the probability of asbestos exposure from lung fiber counts.

Asbestos exposure is a well-known risk factor for various lung diseases, and when they occur, workmen's compensation boards need to make decisions concerning the probability the cause is work related. In the absence of a definitive work history, measures of short and long asbestos fibers as well as counts of asbestos bodies in the lung can be used as diagnostic tests for asbestos exposure. Typically, data from one or more lung samples are available to estimate the probability of asbestos exposure, often by comparing the values with those from a reference nonexposed population. As there is no gold standard measure, we explore a variety of latent class models that take into account the mixed discrete/continuous nature of the data, that each subject may provide data from more than one lung sample, and that the within-subject results across different samples may be correlated. Our methods can be useful to compensation boards in providing individual level probabilities of exposure based on available data, to researchers who are studying the test properties for the various measures used in this area, and more generally, to other test situations with similar data structure.

Exposure to aerosolized bacteria and fungi among collectors of commercial, mixed residential, recyclable and compostable waste.

Biological hazards associated with the collection of solid and compostable waste have not been well characterized in North America. This is an issue because workers who handle such materials may be exposed to bioaerosols (airborne bacteria and fungi) and dusts resulting in infections or allergic diseases. We conducted a personal sampling campaign for culturable bacteria and fungi in the breathing zones of waste collectors in a variety of typical work settings (scenarios) in the province of Quebec, Canada. Total culturable bacterial and fungal counts were analyzed and compared to ambient environmental levels (background) to determine the degree of incremental exposure among workers. In several scenarios, worker exposure counts were significantly (p < or = 0.05) higher than ambient levels measured upwind, with the highest personal exposures to bacteria observed for urban compostable waste collectors (median = 50,300 Colony Forming Units/m(3) of air (CFU/m(3))). On the other hand, fungal counts collected on an every-other-week cycle were highest among a group of rural compostable waste collectors (median = 101,700 CFU/m(3)). Similar exposures to culturable bacteria and fungi have been reported in European workers who showed such adverse health effects as nausea, diarrhea, upper respiratory tract irritation, and allergy. Therefore, it may be necessary to modify certain work practices in order to minimize exposure. Recommendations include automation of waste and compost collection, use of personal protective equipment including goggles, gloves, and disposable masks, and meticulous personal hygiene.

Chalazal seed coat development in Brassica napus.

The chalazal seed coat (CZSC) is a maternal subregion adjacent to the funiculus which serves as the first point of entry into the developing seed. This subregion is of particular interest in Brassica napus (canola) because of its location within the seed and its putative contribution to seed filling processes. In this study, the CZSC of canola was characterized at an anatomical and molecular level to (i) describe the cellular and subcellular features of the CZSC throughout seed development, (ii) reveal cellular features of the CZSC that relate to transport processes, (iii) study gene activity of transporters and transcriptional regulators in the CZSC subregion over developmental time, and (iv) briefly investigate the contribution of the A and C constituent genomes to B. napus CZSC gene activity. We found that the CZSC contains terminating ends of xylem and phloem as well as a mosaic of endomembrane and plasmodesmatal connections, suggesting that this subregion is likely involved in the transport of material and information from the maternal tissues of the plant to other regions of the seed. Laser microdissection coupled with quantitative RT-PCR identified the relative abundance of sugar, water, auxin and amino acid transporter homologs inherited from the constituent genomes of this complex polyploid. We also studied the expression of three transcription factors that were shown to co-express with these biological processes providing a preliminary framework for the regulatory networks responsible for seed filling in canola and discuss the relationship of the CZSC to other regions and subregions of the seed and its role in seed development.

Implementing fit testing for N95 filtering facepiece respirators: practical information from a large cohort of hospital workers.

Qualitative fit testing for N95 respirators was conducted on 1271 health care workers. All male participants were fitted with a respirator. Six females, all under age 40 years, were not successfully fitted. The first-choice respirator provided a successful fit in 95.1% of the men and 85.4% of the women. Gender and age in women were significant factors associated with successful fitting. These differences should be considered when implementing a respiratory protection program.

Characterizing and predicting ultrafine particle counts in Canadian classrooms during the winter months: model development and evaluation.

School classrooms are potentially important micro-environments for childhood exposures owing to the large amount of time children spend in these locations. While a number of airborne contaminants may be present in schools, to date few studies have examined ultrafine particle (0.02-1 microm) (UFP) levels in classrooms. In this study, our objective was to characterize UFP counts (cm(-3)) in classrooms during the winter months and to develop a model to predict such exposures based on ambient weather conditions and outdoor UFPs, as well as classroom characteristics such as size, temperature, relative humidity, and carbon dioxide levels. In total, UFP count data were collected on 60 occasions in 37 occupied classrooms at one elementary school and one secondary school in Pembroke, Ontario. On average, outdoor UFP levels exceeded indoor measures by 8989 cm(-3) (95% confidence interval (CI): 6382, 11596), and classroom UFP counts were similar at both schools with a combined average of 5017 cm(-3) (95% CI: 4300, 5734). Of the variables examined only wind speed and outdoor UFPs were important determinants of classrooms UFP levels. Specifically, each 10 km/h increase in wind speed corresponded to an 1873 cm(-3) (95% CI: 825, 2920) decrease in classroom UFP counts, and each 10000 cm(-3) increase in outdoor UFPs corresponded to a 1550 cm(-3) (95% CI: 930, 2171) increase in classroom UFP levels. However, high correlations between these two predictors meant that the independent effects of wind speed and outdoor UFPs could not be separated in multivariable models, and only outdoor UFP counts were included in the final predictive model. To evaluate model performance, classroom UFP counts were collected for 8 days at two new schools and compared to predicted values based on outdoor UFP measures. A moderate correlation was observed between measured and predicted classroom UFP counts (r=0.63) for both schools combined, but this relationship was not valid on days in which a strong indoor UFP source (electric kitchen stove) was active in schools. In general, our findings suggest that reasonable estimates of classroom UFP counts may be obtained from outdoor UFP data but that the accuracy of such estimates are limited in the presence of indoor UFP sources.

Determinants of ultrafine particle exposures in transportation environments: findings of an 8-month survey conducted in Montréal, Canada.

An 8-month sampling campaign was conducted in Montréal, Canada to explore determinants of ultrafine particle (UFP) exposures in transportation environments and to develop models to predict such exposures. Between April and November 2006, UFP (0.02-1 mum) count exposure data were collected for one researcher during 80 morning and evening commutes including a 0.5-km walk, a 3-km bus ride, and a 26-km automobile ride in each direction. Ambient temperature, relative humidity, precipitation, and wind speed/direction data were collected for each transit period and the positions of bus and automobile windows were recorded. Mixing heights were also estimated. Morning UFP exposures were significantly greater than those in the evening, with the highest levels observed in the automobile and the lowest while walking. Wind speed and mixing height were highly correlated, and as a result only wind speed was considered in multivariable models owing to the accessibility of quantitative hourly monitoring data. In these models, each 10 degrees C increase in morning temperature was associated with decreases of 14,560/cm(3) (95% CI=11,111 to 18,020), 8160/cm(3) (95% CI=5060 to 11,260), and 11,310/cm(3) (95% CI=6820 to 15,810) for UFP exposures in walk, bus, and automobile environments, respectively. Likewise, each 10-km/h increase in morning wind speed corresponded to decreases of 8252/cm(3) (95% CI=5130 to 11,360), 6210/cm(3) (95% CI=3420 to 9000), and 6350/cm(3) (95% CI=2440 to 10,260) for UFP exposures in walk, bus, and automobile environments, respectively. Similar trends were observed in the evening hours. In an evaluation of model performance, moderate correlations were observed between measured and predicted UFP exposures on new bus (r=0.65) and automobile (r=0.77) routes. Further research is required to incorporate variables such as traffic density and vehicle ventilation settings into the models presented.

Indoor ultrafine particle exposures and home heating systems: a cross-sectional survey of Canadian homes during the winter months.

Exposure to airborne particulate matter has a negative effect on respiratory health in both children and adults. Ultrafine particle (UFP) exposures are of particular concern owing to their enhanced ability to cause oxidative stress and inflammation in the lungs. In this investigation, our objective was to examine the contribution of home heating systems (electric baseboard heaters, wood stoves, forced-air oil/natural gas furnace) to indoor UFP exposures. We conducted a cross-sectional survey in 36 homes in the cities of Montréal, Québec, and Pembroke, Ontario. Real-time measures of indoor UFP concentrations were collected in each home for approximately 14 h, and an outdoor UFP measurement was collected outside each home before indoor sampling. A home-characteristic questionnaire was also administered, and air exchange rates were estimated using carbon dioxide as a tracer gas. Average UFP exposures of 21,594 cm(-3) (95% confidence interval (CI): 14,014, 29,174) and 6660 cm(-3) (95% CI: 4339, 8982) were observed for the evening (1600-2400) and overnight (2400-0800) hours, respectively. In an unadjusted comparison, overnight baseline UFP exposures were significantly greater in homes with electric baseboard heaters as compared to homes using forced-air oil or natural gas furnaces, and homes using wood stoves had significantly greater overnight baseline UFP exposures than homes using forced-air natural gas furnaces. However, in multivariate models, electric oven use (beta=12,253 cm(-3), 95% CI: 3524, 20,982), indoor relative humidity (beta=1136 cm(-3) %, 95% CI: 372, 1899), and indoor smoking (beta=18,192 cm(-3), 95% CI: 2073, 34,311) were the only significant determinants of mean indoor UFP exposure, whereas air exchange rate (beta=4351 cm(-3) h(-1), 95% CI: 1507, 7195) and each 10,000 cm(-3) increase in outdoor UFPs (beta=811 cm(-3), 95% CI: 244,1377) were the only significant determinants of overnight baseline UFP exposures. In general, our findings suggest that home heating systems are not important determinants of indoor UFP exposures.

Exposure pathway assessment at a copper-beryllium alloy facility.

Controlling beryllium inhalation exposures to comply with regulatory levels (2 micro g m(-3) of air) does not appear to prevent beryllium sensitization and chronic beryllium disease (CBD). Additionally, it has proven difficult to establish a clear inhalation exposure-response relationship for beryllium sensitization and CBD. Thus, skin may be an important route of exposure that leads to beryllium sensitization. A 2000 survey had identified prevalence of sensitization (7%) and CBD (4%) in a beryllium alloy facility. An improved particulate migration control program, including dermal protection in production areas, was completed in 2002 at the facility. The purpose of this study was to evaluate levels of beryllium in workplace air, on work surfaces, on cotton gloves worn by employees over nitrile gloves, and on necks and faces of employees subsequent to implementation of the program. Over a 6 day period, we collected general area air samples (n = 10), wipes from routinely handled work surfaces (n = 252), thin cotton glove samples (n = 113) worn by employees, and neck wipes (n = 109) and face wipes (n = 109) from the same employees. In production, production support and office areas geometric mean (GM) levels of beryllium were 0.95, 0.59 and 0.05 micro g per 100 cm(2) on work surfaces; 42.8, 73.8 and 0.07 micro g per sample on cotton gloves; 0.07, 0.09 and 0.003 micro g on necks; and 0.07, 0.12 and 0.003 micro g on faces, respectively. Correlations were strong between beryllium in air and on work surfaces (r = 0.79), and between beryllium on cotton gloves and on work surfaces (0.86), necks (0.87) and faces (0.86). This study demonstrates that, even with the implementation of control measures to reduce skin contact with beryllium as part of a comprehensive workplace protection program, measurable levels of beryllium continue to reach the skin of workers in production and production support areas. Based on our current understanding of the multiple exposure pathways that may lead to sensitization, we support prudent control practices such as use of protective gloves to minimize skin exposure to beryllium salts and fine particles.

Mineralogical and exposure determinants of pulmonary fibrosis among Québec chrysotile miners and millers.

OBJECTIVES: Lung fibre content was determined for 86 former chrysotile miners and millers in two Québec mining regions: Thetford mines (TM) and the Asbestos region (AR). METHODS: Fibres were assessed using transmission electron microscopy (TEM) and energy dispersive X-ray spectrometry (EDS). Asbestos body (AB) concentrations were assessed by microscopy of tissue digests. Corresponding histological lung tissue sections were quantitatively graded for the severity of interstitial fibrosis on a 12-point scale. Fibrosis score and its associations with (1) fibre concentrations and fibre dimensions within three fibre length intervals (less than 5 microm, 5-10 microm, and over 10 microm), and (2) several exposure variables were evaluated using correlation coefficients and regression techniques. RESULTS: Concentration of short (<5 microm) tremolite fibres was the best predictor of fibrosis grade in both mining groups (r=0.44, P<0.01 and r=0.39, P<0.01 for TM and AR, respectively). Chrysotile fibre concentration showed a lower correlation with the fibrosis grade for subjects from TM only. Long (>10 microm) amosite fibre concentration showed a linear relationship with the fibrosis score in miners and millers from AR. Exposure variables, including smoking, had no predictive value for fibrosis grade. Within fibre length categories, fibre dimension was not related to the fibrosis score. CONCLUSION: Lung fibre concentration as measured by TEM/EDS, especially that of short (<5 microm) tremolite fibres, is a better predictor of fibrosis grade in these two groups of chrysotile miners than either the concentration of ABs or the duration of exposure. Due to the limitation of our counting method, almost all fibres longer than 10 microm observed in this study were shorter than 14 microm. Thus, if length plays a role in fibrogenesis, it may be related to fibres of greater length than those covered in this study.

Determination of airborne isocyanates generated during the thermal degradation of car paint in body repair shops.

Polyurethanes are widely used in car paint formulations. During thermal degradation, such polymeric systems can generate powerful asthmatic sensitizing agents named isocyanates. In body repair shops, the thermal degradation of car paint can occur during abrasive processes that generate enough heat to involve release of isocyanates in air. An environmental monitoring study was performed in two body repair training schools and in a body repair shop to evaluate the workers' exposure to isocyanates during cutting, grinding and orbital sanding operations. For sampling, cassettes containing two 1-(2-methoxyphenyl)piperazine (MOPIP)-coated glass fiber filters (MFs) ( approximately 5 mg of MOPIP per filter) and bubblers containing 15 ml of MOPIP solution in toluene (1.0 mg ml(-1)) backed at the outlet with cassettes containing two MFs were used. Tandem mass spectrometry was used to analyze the MOPIP derivatives of isocyanic acid (HNCO), all the linear aliphatic isocyanates ranging from methyl isocyanate (Me-i) to hexyl isocyanate, all the alkenyl isocyanates ranging from propylene isocyanate to hexylene isocyanate, 1,6-hexamethylene diisocyanate (HDI), trans- and cis-isophorone diisocyanate (IPDI), 2,4- and 2,6-toluene diisocyanate (TDI), 2,4'-; 2,2'- and 4,4'-methylenediphenyl diisocyanate (MDI), phenyl isocyanate (Ph-i) and p-toluene isocyanate (p-Tol-i). The instrumental detection limits (LOD) were in the 0.13-0.75 microg of NCO per m(3) range for 15 l air samples converted into 3 ml liquid samples. The isocyanate concentrations detected in the workers' breathing zone were in the 1.07-9.80 microg of NCO per m(3) range for cutting, 0.63-3.62 microg of NCO per m(3) range for grinding and 0-1.29 microg of NCO per m(3) range for sanding. However, a rapid decrease of the isocyanate concentration was observed while moving away from the emission source. Among the isocyanates detected the most abundant were the monomers (MDI, HDI, TDI and IPDI) and Me-i.

Assessment of exposure to quartz, cristobalite and silicon carbide fibres (whiskers) in a silicon carbide plant.

The main objective of the present paper is to report on the concentration of silicon carbide (SiC) fibres, crystalline silica and respirable dust in a Canadian SiC production plant and to compare the results with earlier investigations. The second objective is to tentatively explain the differences in concentration of the fibrogenic substances between different countries. The assessment of SiC fibres, dusts, respirable quartz and cristobalite was performed according to standard procedures. The highest 8 h time-weighted average concentrations of fibres were found among the crusher and backhoe attendants and the carboselectors with an arithmetic mean of 0.63 fibres ml(-1) for the former group and 0.51 fibres ml(-1) for the latter group. The results of respirable SiC fibres in the Canadian plant were lower than in the Norwegian and Italian industries. Most of the 8 h time-weighted average concentrations for quartz were less than or around the limit of detection of 0.01 mg m(-3). The maximum 8 h time-weighted average concentration for quartz was found among the carboselectors (0.157 mg m(-3)), followed by the labourers (0.032 mg m(-3)). Similarly, most of the 8 h time-weighted average cristobalite measurements were less than the limit of detection of 0.01 mg m(-3) except for the carboselectors where it was found to be 0.044 mg m(-3). The assessment of the Italian occupational settings exposure demonstrated elevated quartz concentrations, while cristobalite was absent. The authors have concluded that the investigations that were performed in the last two decades in this field by researchers from different countries seem to support that SiC fibres (whiskers) constitute a major airborne health hazard.