Photobiomodulation, Transmucosal Laser Irradiation of Blood, or B complex as alternatives to treat Covid-19 Related Long-Term Taste Impairment: double-blind randomized clinical trial.

COVID-19 Related Long-Term Taste Impairment (CRLTTI) is a condition that can be expressed after COVID-19 contagion, lasting for months or even years, affecting the routine and quality of life of individuals. Participants expressing CRLTTI, with a minimum of 2 months, attested by PCR-RT test were assessed for taste and smell, and underwent experimental treatments in 6 distinct groups: Photobiomodulation (PBM) in tongue dorsum and lateral (660 nm, 808 nm, association of 660 and 808 nm), Transmucosal Laser Irradiation of Blood (TLIB)-ventral surface of tongue (660 nm), B complex supplementation, and Sham laser. No intergroup statistical differences were observed at the final evaluation, despite the tendencies of better results with PBM and TLIB observed. PBM, TLIB, and B complex might be treatment options in the management of CRLTTI, despite the lack of total remission of taste and smell perception after 8 sessions (PBM and TLIB) or 30 days of B complex supplementation.

Long-term safety of photobiomodulation therapy for oral mucositis in hematopoietic cell transplantation patients: a 15-year retrospective study.

Photobiomodulation therapy (PBMT) has demonstrated efficacy in the prevention and treatment of oral mucositis (OM) in hematopoietic cell transplantation (HCT). However, based on the cell stimulation properties, its long-term safety has been questioned, mainly in relation to risk for secondary malignancies in the oral cavity. The aim of this study was to investigate if different PBMT protocols for OM control have association with immediate and late adverse effects in HCT patients. Data on autologous and allogeneic transplantation, conditioning regimen, PBMT protocols, and OM severity were retrospectively collected from medical and dental records. Presence of secondary malignancies in the oral cavity was surveyed during a 15-year follow-up. Impact of OM on overall survival was also analyzed. Different PBMT protocols for prevention and treatment of OM were recorded over the years. Severe OM (grades 3 and 4) was infrequently observed. When present, we observed a significant decrease of the overall survival. No immediate adverse effect and secondary malignancy was associated to PBMT. In conclusion, the PBMT protocols used in the study were considered safe. The low frequency of severe OM observed encourages the implementation of this technique, with a special emphasis on the dosimetry adjustments focused on the HCT context.

In-office Treatments for Dentin Hypersensitivity: A Randomized Split-mouth Clinical Trial.

PURPOSE: To assess the effectiveness of four in-office therapies used for the treatment of dentin hypersensitiviy (DH) after one single application. MATERIALS AND METHODS: A randomised, controlled, split-mouth clinical trial was designed to evaluate the following treatments: 5% sodium fluoride varnish (positive control); 3% potassium oxalate; two-step self-etching adhesive; high power diode laser. Nineteen patients were selected and one tooth per quadrant was included in the study. After evaporative stimulation, pain was quantified by the Visual Analog Scale (VAS) at baseline, immediately after treatment, and after 15, 30 and 60 days. RESULTS: Compared to the baseline values, fluoride varnish (p = 0.00) and potassium oxalate (p = 0.00) presented an immediate desensitising effect that remained constant at 15, 30 and 60 days. The high-power diode laser presented significant reduction in VAS scores after 15 days (p = 0.00), while in the self-etching adhesive group, a significant reduction in VAS scores was observed only after 60 days (p = 0.03). The change in VAS ([VAS x days] - VAS baseline) differed among the groups immediately after treatment, being higher in the fluoride varnish and lower in the adhesive groups, but no statistically significant difference was found at time intervals of 15, 30 and 60 days. CONCLUSION: When an immediate desensitising effect is desired after one single application, fluoride varnish and potassium oxalate should be used. High-power diode laser and self-etching adhesive may not be clinically considered an appropriate desensitising therapy after one single application.

Surface Characterization and Short-term Adhesion to Zirconia after Ultra-short Pulsed Laser Irradiation.

PURPOSE: To evaluate the suitability of an ultra-short pulsed laser (USPL) to treat zirconia ceramic surfaces and increase their adhesion to dual-curing resin cement. MATERIALS AND METHODS: Twenty 10 × 10 × 5 mm³ blocks were prepared from a zirconia ceramic (Y-TZP). The specimens were polished and randomly assigned to four groups (n = 5) which received the following surface treatments: sandblasting (SB) with Al2O3 particles and silica coating (SC) with SiO2 particles as positive controls; two groups received USPL irradiation, one with 10 scan repetitions (L10) and the other with 20 (L20). Laser irradiation was performed at 1030 nm, 2.3 J/cm², 6 ps pulse duration. The ceramic blocks were duplicated in composite resin and cemented with a dual-curing resin cement. Half of the blocks were then stored in water (37°C) for 24 h and the other half for 1 month. At each time, 40 to 60 sticks per group were subjected to microtensile bond strength testing. Data were analyzed statistically using the Kruskal-Wallis test (α = 0.05). RESULTS: Laser-treated zirconia presented statistically significantly higher roughness than did SB and SC. After 24 h, the highest bond strength means (MPa) were achieved by L10 (42.3 ± 10.8) and L20 (37.9 ± 14.4), and both of them were statistically significantly higher than SB (22.0 ± 5.3) and SC (20.8 ± 7.1) (p < 0.05). After 1 month of storage, L10- and L20-treated zirconia still showed significantly higher bond strengths than did SB- and SC-treated zirconia (p < 0.05). CONCLUSION: USPL irradiation significantly increases bond strength of zirconia ceramic to dual-curing resin cement and might be an alternative for improving adhesion to this material.

Combined Tin-Containing Fluoride Solution and CO2 Laser Treatment Reduces Enamel Erosion in vitro.

The aim of this in vitro study was to evaluate the effect of combined CO2 laser and tin-containing fluoride treatment on the formation and progression of enamel erosive lesions. Ninety-six human enamel samples were obtained, stored in thymol solution and, after surface polishing, randomly divided into 6 different surface treatment groups (n = 16 in each group) as follows: no treatment, control (C); one CO2 laser irradiation (L1); two CO2 laser irradiations (L2); daily application of fluoride solution (F); combined daily fluoride solution + one CO2 laser irradiation (L1F), and combined daily fluoride solution + two CO2 laser irradiations (L2F). Laser irradiation was performed at 0.3 J/cm2 (5 µs/226 Hz/10.6 µm) on day 1 (L1) and day 6 (L2). The fluoride solution contained AmF/NaF (500 ppm F), and SnCl2 (800 ppm Sn) at pH 4.5. After surface treatment the samples were submitted to an erosive cycling over 10 days, including immersion in citric acid (2 min/0.05 M/pH = 2.3) 6 times daily and storage in remineralization solution (≥1 h) between erosive attacks. At the end of each cycling day, the enamel surface loss (micrometers) was measured using a 3D laser profilometer. Data were statistically analyzed by means of a 2-level mixed effects model and linear contrasts (α = 0.05). Group F (-3.3 ± 2.0 µm) showed significantly lower enamel surface loss than groups C (-27.22 ± 4.1 µm), L1 (-18.3 ± 4.4 µm) and L2 (-16.3 ± 5.3 µm) but higher than L1F (-1.0 ± 4.4 µm) and L2F (1.4 ± 3.2 µm, p < 0.05). Under the conditions of this in vitro study, the tin-containing fluoride solution caused 88% reduction of enamel surface loss, while its combination with CO2 laser irradiation at 0.3 J/cm2 hampered erosive loss almost completely.

Clinical evaluation of low-power laser and a desensitizing agent on dentin hypersensitivity.

The aim of this randomized, longitudinal clinical study was to evaluate different protocols for dentin hypersensitivity treatment with low-power laser at different dosages, desensitizing agent, and associations, for a period of 6 months. After analysis of the inclusion and exclusion criteria of volunteer participants, those who present pain resulting from non-carious cervical lesions were selected. Twenty-seven patients participated in the study, and 55 lesions were recorded. The lesions were divided into five groups (n = 11), treated, and evaluated: G1: Gluma Desensitizer (Heraeus); G2: low-power laser (Photon Lase, DMC) at low dose (three vestibular points and one apical point of irradiation: 30 mW, 10 J/cm(2), 9 s per point with wavelength of 810 nm), three sessions were performed with an interval of 72 h between them; G3: low-power laser at high dose (application at one cervical and one apical point: 100 mW, 90 J/cm(2), 11 s per point with wavelength of 810 nm), three sessions were performed with an interval of 72 h between irradiations; G4: low-power laser at low dose + Gluma Desensitizer; and G5: low-power laser at high dose + Gluma Desensitizer, the level of sensitivity of each volunteer was evaluated with a visual analog scale of pain (VAS) with the use of air from a triple syringe and exploration with a probe after time intervals of 5 min, 1 week, and 1, 3, and 6 months after treatment. Data were collected and subjected to statistical analysis. Kolmogorov-Smirnov test was used to verify the distribution of the data, and nonparametric Kruskal-Wallis and Friedman tests were performed for comparison among the experimental groups and time intervals studied, respectively. Statistically significant differences between the studied time intervals (p < 0.05) were detected. From the difference in pain, it was observed that for both stimuli, the protocol with the Gluma desensitizing agent presented immediate effects of pain reduction. For low-level lasers, it was observed that there were distinct effects for the different doses; however, both were efficient in reducing pain up to the 6 months of clinical follow-up. Therefore, it could be concluded that all the desensitizing protocols were effective in reducing dentin hypersensitivity, but with different effects. The combination of protocols is an interesting alternative in the treatment of cervical dentin hypersensitivity.

Precise ablation of dental hard tissues with ultra-short pulsed lasers. Preliminary exploratory investigation on adequate laser parameters.

This study aimed to evaluate the possibility of introducing ultra-short pulsed lasers (USPL) in restorative dentistry by maintaining the well-known benefits of lasers for caries removal, but also overcoming disadvantages, such as thermal damage of irradiated substrate. USPL ablation of dental hard tissues was investigated in two phases. Phase 1--different wavelengths (355, 532, 1,045, and 1,064 nm), pulse durations (picoseconds and femtoseconds) and irradiation parameters (scanning speed, output power, and pulse repetition rate) were assessed for enamel and dentin. Ablation rate was determined, and the temperature increase measured in real time. Phase 2--the most favorable laser parameters were evaluated to correlate temperature increase to ablation rate and ablation efficiency. The influence of cooling methods (air, air-water spray) on ablation process was further analyzed. All parameters tested provided precise and selective tissue ablation. For all lasers, faster scanning speeds resulted in better interaction and reduced temperature increase. The most adequate results were observed for the 1064-nm ps-laser and the 1045-nm fs-laser. Forced cooling caused moderate changes in temperature increase, but reduced ablation, being considered unnecessary during irradiation with USPL. For dentin, the correlation between temperature increase and ablation efficiency was satisfactory for both pulse durations, while for enamel, the best correlation was observed for fs-laser, independently of the power used. USPL may be suitable for cavity preparation in dentin and enamel, since effective ablation and low temperature increase were observed. If adequate laser parameters are selected, this technique seems to be promising for promoting the laser-assisted, minimally invasive approach.

Protective effect of CO2 laser (10.6 µm) and fluoride on enamel erosion in vitro.

The aim of this study was to analyze the effect of CO(2) laser (10.6 µm) irradiation with 5-µs pulse width in prevention of enamel erosion due to citric acid exposure in vitro. One hundred forty-four bovine enamel samples were cut into 5 × 5 × 2-mm-size slabs and polished to obtain plane surfaces. Enamel surfaces were covered with acid-resistant varnish, except for a central area of 2.5 mm in diameter. The samples were divided into four groups (n = 12/group/day): C-control, no treatment; L-CO(2) laser irradiation (0.3 J/cm(2), 5 µs, 226 Hz); F-topical fluoride treatment, 1.25%F(-) (AmF/NaF) for 3 min; and FL-fluoride treatment + CO(2) laser. For erosive demineralization, samples were immersed in 40 ml of citric acid (0.05 M, pH 2.3) for 20 min two times per day during 5 days. After 1, 3, and 5 days, surface loss was measured by digital profilometer. According to the repeated measure ANOVA and post hoc comparisons, all the treatments showed statistically significant reduction of enamel loss as compared to control group, in all investigated times (p < 0.0001): L (52%,31%,37%); F (28%,24%,29%); FL (73%,55%,57%). Both CO(2) laser irradiation alone (L) and the combined laser-fluoride treatment (FL) caused less enamel loss than the fluoride group (F) in all days (p < 0.0001 for L in all times; and p < 0.0001, p = 0.0220 and p = 0.0051 for F, respectively, at days 1, 3, and 5). Under the conditions of this study, CO(2) laser irradiation (0.3 J/cm(2), 5 µs, 226 Hz) could effectively reduce enamel surface loss due to citric acid exposure, in vitro. This effect was still observed after 5 days of repeated acid exposures.

In vitro effects of Er,Cr:YSGG laser on dentine hypersensitivity. Dentine permeability and scanning electron microscopy analysis.

The aim of the present study was to determine clinical parameters for the use of Er,Cr:YSGG laser in the treatment of dentine hypersensitivity. Two antagonist areas were determined as control and experimental areas for irradiation in 90 premolar roots. Each surface was conditioned with 24% EDTA (sub-group 1) and 35% phosphoric acid (sub-group 2) and irradiated with the following settings: 1) Er:YAG, 60 mJ, 2 Hz, defocused; groups 2 to 9: irradiation with Er,Cr:YSGG laser, 20 Hz, Z6 tip, 0% of air and water: 2) Er,Cr:YSGG 0.25 W; 3) 0.5 W; 4) 0.75 W; 5) 1.0 W; 6) 1.25 W, 7) 1.50 W, 8) 2 W; 9) 2 W. After irradiation, samples were immersed in methylene blue solution and included in epoxy resin to obtain longitudinal cuts. The images were digitalized and analyzed by computer software. Although the samples irradiated with Er:YAG laser showed less microleakage, sub-group 1 showed differences between the groups, differing statistically from groups 3, 6, and 9. The results of sub-group 2 showed that the mean values of Er:YAG samples showed a negative trend, however, no differences were detected between the groups. For scanning electron microscopy analysis, dentine squares were obtained and prepared to evaluate the superficial morphology. Partial closure of dentinal tubules was observed after irradiation with Er:YAG and Er,Cr:YSGG laser in the 0.25 and 0.50 W protocols. As the energy densities rose, open dentinal tubules, carbonization and cracks were observed. It can be concluded that none of the parameters were capable of eliminating microleakage, however, clinical studies with Er:YAG and Er,Cr:YSGG lasers should be conducted with the lowest protocols in order to determine the most satisfactory setting for dentine hypersensitivity.

Effects of Er:YAG and Er,Cr:YSGG lasers on dentine hypersensitivity. Short-term clinical evaluation.

Dentine hypersensitivity (DH) is a painful condition and is a clinical challenge due to the different treatment strategies available. High-intensity lasers have been studied as a possible option. The aim of this randomized, controlled, double-blind clinical study was to evaluate the effects of Er:YAG and Er,Cr:YSGG lasers on DH. The study group comprised 28 subjects who met the inclusion criteria. A visual analogue scale was used to quantify sensitivity before treatment as baseline, immediately before and immediately after treatment, and 1 week and 1 month after treatment. Teeth were assigned to four groups: group 1 control (no treatment), group 2 Er:YAG laser treatment (2 Hz/32.4 mJ/5.9 J/cm(2)), group 3 Er,Cr:YSGG laser treatment (0.25 W/4.4 J/cm(2)), and group 4 Er,Cr:YSGG laser treatment (0.50 W/ 8.9 J/cm(2)). Data were collected and submitted to statistical analysis for both evaporative (air) and mechanical (probe) stimulation. For both the air and probe stimulation no differences were observed between the pretreatment sensitivities. With the evaporative stimulus, the pain level immediately after treatment was reduced; however, after this the values remained stable. Irradiation with the Er:YAG laser was associated with the lowest level of pain. With the mechanical stimulus, group 4 showed the most pronounced decrease in pain immediately after treatment; however, by the end of the study, pain levels had increased. Groups 1, 2 and 3 showed a reduction in pain that was significantly different from that in group 4 after the 4 weeks of clinical follow up. Based on the results and within the limits of this study, it can be concluded that none of the laser treatments studied was capable of completely eliminating pain, but the Er:YAG and Er,Cr:YSGG lasers are suitable for the treatment of DH.

Microtensile bond strength of composite resin to glass-infiltrated alumina composite conditioned with Er,Cr:YSGG laser.

Tribochemical silica-coating is the recommended conditioning method for improving glass-infiltrated alumina composite adhesion to resin cement. High-intensity lasers have been considered as an alternative for this purpose. This study evaluated the morphological effects of Er,Cr:YSGG laser irradiation on aluminous ceramic, and verified the microtensile bond strength of composite resin to ceramic following silica coating or laser irradiation. In-Ceram Alumina ceramic blocks were polished, submitted to airborne particle abrasion (110 µm Al(2)O(3)), and conditioned with: (CG) tribochemical silica coating (110 µm SiO(2)) + silanization (control group); (L1-L10) Er,Cr:YSGG laser (2.78 µm, 20 Hz, 0.5 to 5.0 W) + silanization. Composite resin blocks were cemented to the ceramic blocks with resin cement. These sets were stored in 37°C distilled water (24 h), embedded in acrylic resin, and sectioned to produce bar specimens that were submitted to microtensile testing. Bond strength values (MPa) were statistically analyzed (α ≤0.05), and failure modes were determined. Additional ceramic blocks were conditioned for qualitative analysis of the topography under SEM. There were no significant differences among silicatization and laser treatments (p > 0.05). Microtensile bond strength ranged from 19.2 to 27.9 MPa, and coefficients of variation ranged from 30 to 55%. Mixed failure of adhesive interface was predominant in all groups (75-96%). No chromatic alteration, cracks or melting were observed after laser irradiation with all parameters tested. Surface conditioning of glass-infiltrated alumina composite with Er,Cr:YSGG laser should be considered an innovative alternative for promoting adhesion of ceramics to resin cement, since it resulted in similar bond strength values compared to the tribochemical treatment.

Photobiomodulation for Preventive Therapy of Recurrent Herpes Labialis: A 2-Year In Vivo Randomized Controlled Study.

Objective: The present study aimed to evaluate the effectiveness of the application of photobiomodulation therapy (PBMT) in the prevention of recurrent herpes labialis (RHL) through a randomized controlled clinical trial. Background data: RHL is a lifelong infection that effects patients' quality of life. In the literature PBMT has shown positive results preventing RHL, decreasing recurrences and severity of lesions. Despite the good results reported, there are still few controlled clinical studies published on the subject. Methods: For this study, 158 volunteers were recruited and were randomly divided into three study groups: Laser 1-1 J/point (L1J): n = 61, Laser 2-2 J/point (L2J): n = 50, and placebo-0 J/point: n = 47. The treatment consisted of a protocol of 15 sessions throughout 6 months and 2 years of follow-up posttreatment. Results: The results showed that L1J presented the most satisfactory results concerning the reduction of the number of lesions per year and less severity of recurrences in the long-term evaluation when compared with L2J. Both Laser Groups (L1J and L2J) were statistically more efficient than placebo in all aspects analyzed. All patients who received laser treatment (L1J and L2J) and presented recurrences had significant improvement in frequency and/or severity of lesions. No patient had side effects from treatment. Conclusions: PBMT can be effective in the reduction of the frequency of recurrences of RHL and in the severity of postirradiation lesions that may appear.

Evaluation of carbon dioxide laser irradiation associated with calcium hydroxide in the treatment of dentinal hypersensitivity. A preliminary study.

Attempts have been made to treat dentinal hypersensitivity by sealing exposed dentinal tubules, and the carbon dioxide (CO(2)) laser has been shown to have a sealing effect on dentinal surfaces. The purpose of this study was to analyze the morphological ultra-structure and temperature change after CO(2) laser irradiation of dentin. Fourteen human third molars were selected and cleaned. An area was delimited, and the samples were randomly divided into seven groups: Group 1 (G1): control; G2, calcium hydroxide paste (CA) + CO(2) laser (L) (0.5 W/63,69 W/cm(2)); G3, CA + L (1 W/125,38 W/cm(2)); G4, CA + L (1.5 W/191,08 W/cm(2)); G5, L (0.5 W); G6, L (1 W); G7, L (1.5 W). All irradiation was performed in unfocused mode. The electron micrographs were analyzed by three observers. For temperature analysis, a thermocouple was used. Data were subjected to statistical analysis. The Kruskal-Wallis non-parametric test showed statistical differences between the groups (P < 0.05). For the two by two comparisons, all groups treated with calcium hydroxide paste presented significantly higher mean scores. In the groups treated by CO(2) laser only, fusion, re-crystallization, cracks and carbonization were observed. A change of 1 ± 5°C was noted in the temperature. Under the limitation of an in vitro study, and with the protocols used, we concluded that CO(2) laser is safe to use for the establishment of partial fusion and re-solidification of the dentinal surface.

Photodynamic therapy and Acyclovir in the treatment of recurrent herpes labialis: A controlled randomized clinical trial.

BACKGROUND: Herpes Simplex Virus Type 1 (HSV-1) is one of the most widespread infections that can effect the orofacial region. Recurrent infection is considered a life-long oral health problem, leading to pain, discomfort, and social restriction due to esthetic features when active. Effective therapies are needed. This study aimed to compare photodynamic therapy (PDT), Topical Acyclovir (AC), and the association of both in the healing process and self-reported symptomologies of HSV-1 recurrences. METHODS: Patients were randomly assigned into 3 groups (n = 25): PDT (low-power laser, 660 nm, 40 mW, 120 J/cm2, 4.8 J, 120 s per point) and methylene blue (0.005 %) as photosensitizer; AC (5%); PDT + AC.Data concerning lesion size, healing time, and self-reported healing parameters, such as pain, tingling, and edema were taken every day up to complete healing for all studied groups. RESULTS: There was no significant difference in healing time and pain between groups. AC group showed a significant minor reduction of the lesion compared to the AC-PDT group on day 1. Regarding edema and tingling, the comparison of treatments showed a statistical difference only on day 1, where PDT showed better results. CONCLUSION: With all the limitations of this study, it can be concluded that only on day 1 PDT showed positive effects in the treatment of herpes lesions in comparison to AC.

A minimally invasive procedure for esthetic achievement: enamel microabrasion of fluorosis stains.

Esthetic alterations (such as fluorosis) that result from intrinsic dental staining in enamel and dentin can be controlled or softened by noninvasive methods such as dental bleaching or enamel microabrasion. Part of the enamel is removed during microabrasion; however, this wear is clinically insignificant and does not harm the dental structure. This article presents a case in which the microabrasion technique was used to remove fluorosis staining. Based on the results of this case report, it can be concluded that this technique is efficient and can be considered a minimally invasive procedure.

Nd:YAG laser in caries prevention: a clinical trial.

BACKGROUND AND OBJECTIVE: It is widely known that Nd:YAG can increase enamel resistance to demineralization; however, there are no studies that report the application of Nd:YAG associated with topical application of fluoride in vivo. The aim of this study was to evaluate the effects of the Nd:YAG laser, when associated with the topical application of acidulated phosphate fluoride (APF), for preventing enamel demineralization in vivo. MATERIALS AND METHODS: A double-blind crossover experimental design was used, in which 121 teeth of 33 volunteers were selected. In all volunteers, the right side teeth were selected for Nd:YAG laser+APF application (lased group) and the left side teeth were kept as control group (only APF application). Nd:YAG laser was applied at 60 mJ/pulse, at a repetition rate of 10 Hz and fluence of 84.9 J/cm(2); after that, topical APF was applied for 4 minutes. Recalls were made after 1 year in order to evaluate the formation of white-spot lesions or caries cavities. RESULTS: After 1 year, this in vivo experiment showed a reduction of 39.2% in caries incidence in lased group when compared with the control. The number of white-spots or caries cavities decreased significantly (P = 0.0043) in the Nd:YAG laser group; the formation of white-spots was significantly less (P = 0.0031) when compared with the number of lesions in the control group. CONCLUSION: Combined Nd:YAG laser and topical fluoride treatment was effective for reducing the incidence of caries in vivo.

Effects of Nd:YAG laser irradiation on the hybrid layer of different adhesive systems.

PURPOSE: The aim of this in vitro study was to evaluate the microtensile bond strength (microTBS) and hybrid layer morphology of different adhesive systems, either followed by treatment with Nd:YAG laser irradiation or not. Previous studies have shown the effects of Nd:YAG laser irradiation on the dentin surface at restoration margins, but there are few reports about the significance of the irradiation on the hybrid layer. MATERIALS AND METHODS: The flattened coronal and root dentin samples of 24 bovine teeth were randomly divided into 8 groups, according to the adhesive system used -- Scotchbond Multi Purpose (SBMP) or Clearfil SE Bond (CSEB) -- and were either irradiated with Nd:YAG or not, with different parameters: 0.8 W/10 Hz, 0.8 W/20 Hz, 1.2 W/10 Hz, 1.2 W/20 Hz. The left sides of specimens were the control groups, and right sides were irradiated. A composite crown was built over bonded surfaces and stored in water (24 h at 37 degrees C). Specimens were sectioned vertically into slabs that were subjected to microTBS testing and observed by SEM. RESULTS: Control groups (27.81 +/- 1.38) showed statistically higher values than lased groups (21.37 +/- 0.99), and CSEB control group values (31.26 +/- 15.71) were statistically higher than those of SBMP (24.3 +/- 10.66). There were no significant differences between CSEB (20.34 +/- 10.01) and SBMP (22.43 +/- 9.82) lased groups. Among parameters tested, 0.8 W/10 Hz showed the highest value (25.54 +/- 11.74). Nd:YAG laser irradiation caused dentin to melt under the adhesive layer of both adhesive systems tested. CONCLUSION: With the parameters used in this study, Nd:YAG laser irradiation of the hybrid layer promoted morphological changes in dentin and negatively influenced the bond strength of both adhesive systems.

Laser as a therapy for dry mouth symptoms in a patient with Sjögren's syndrome: a case report.

This clinical case study reports on dry mouth symptoms in a patient with Sjögren's syndrome (SS) who was treated with laser phototherapy (LPT). A 60-year-old woman diagnosed with SS was referred to the laboratory for lasers in dentistry to treat her severe xerostomia. A diode laser (780 nm, 3.8 J/cm2, 15 mW) was used to irradiate the parotid, submandibular, and sublingual glands, three times per week, for a period of 8 months. The salivary flow rate and xerostomia symptoms were measured before, during, and after LPT. Dry mouth symptoms improved during LPT. After LPT, the parotid salivary gland pain and swelling were no longer present. Treatment with LPT was an effective method to improve the quality of life of this patient with SS.

Photodynamic therapy for the treatment of recurrent herpes labialis: preliminary results.

This study sought to evaluate the clinical outcome of patients who had been diagnosed with recurrent herpes labialis (RHL) after treatment with photodynamic therapy (PDT) associated with low-level laser therapy (LLLT). PDT has shown great effectiveness for treating already-established RHL vesicles, compared to ordinary treatments involving antiviral compounds. Two patients with vesicles on their lips were treated with PDT, followed by irradiation with LLLT. Both patients reported pain relief immediately after the procedure; at a six-month follow-up, neither patient showed signs or symptoms that related to RHL.

Associative Protocol for Dentin Hypersensitivity Using Nd:YAG Laser and Desensitizing Agent in Teeth with Molar-Incisor Hypomineralization.

Objective: The aim of this article was to describe and discuss a clinical case in which the Nd:YAG laser and a desensitizing agent were associated in a protocol for dentin hypersensitivity (DH) in teeth with molar-incisor hypomineralization (MIH). Background data: DH is a common condition among the population, being one of the main reasons for patients to seek for a dental treatment. MIH can be considered a condition that induces DH. Methods: The patient was referred for evaluation, complaining of hypersensitivity during eating or drinking cold foods. Clinical evaluation revealed the presence of MIH on the first lower molars. Aiming to treat DH, two strategies for dentin desensitization were associated: the use of a high-power laser (Nd:YAG laser, 1.064 nm; Lares Research), with a 300 µm quartz optical fiber, 1 W of power, 100 mJ of energy, 10 Hz of repetition rate, and 85 J/cm2 of energy density, followed by the application of two layers of a desensitizing agent (Gluma Desensitizer). Results: DH was evaluated immediately, after 1 week and after 1 month of the treatment. Clinical outcomes were satisfactory, confirming the efficacy and considerable durability of the protocol used for the reduction of DH originated from MIH. Conclusions: The association of Nd:YAG laser and a desensitizing agent for controlling DH was effective, showing to be an interesting protocol.