RESUMO
Fibre materials span a broad range of applications ranging from simple textile yarns to complex modern fibre-optic communication systems. Throughout their history, a key premise has remained essentially unchanged: fibres are static devices, incapable of controllably changing their properties over a wide range of frequencies. A number of approaches to realizing time-dependent variations in fibres have emerged, including refractive index modulation, nonlinear optical mechanisms in silica glass fibres and electroactively modulated polymer fibres. These approaches have been limited primarily because of the inert nature of traditional glassy fibre materials. Here we report the composition of a phase internal to a composite fibre structure that is simultaneously crystalline and non-centrosymmetric. A ferroelectric polymer layer of 30 mum thickness is spatially confined and electrically contacted by internal viscous electrodes and encapsulated in an insulating polymer cladding hundreds of micrometres in diameter. The structure is thermally drawn in its entirety from a macroscopic preform, yielding tens of metres of piezoelectric fibre. The fibres show a piezoelectric response and acoustic transduction from kilohertz to megahertz frequencies. A single-fibre electrically driven device containing a high-quality-factor Fabry-Perot optical resonator and a piezoelectric transducer is fabricated and measured.
RESUMO
A new class of multi-material fiber that incorporates micrometer-thickness concentric-cylindrical sheets of glass into polymer matrix has emerged. The ultimate lower limit of feature size and recent observation of interesting instability phenomenon in fiber system motivate us to examine fluid instabilities during the complicated thermal drawing fabrication processing. In this paper, from the perspective of a single instability mechanism, classical Plateau-Rayleigh instabilities in the form of radial fluctuation, we explore the stability of various microstructures (such as shells and filaments) in our composite fibers. The attained uniform structures are consistent with theoretical analysis. Furthermore, a viscous materials map is established from calculations and agrees well with various identified materials. These results not only shed insights into other forms of fluid instabilities, but also provide guidance to achieve more diverse nanostructures (such as filaments, wires, and particles) in the microstructured fibers.
RESUMO
We present the light-propagation characteristics of OmniGuide fibers, which guide light by concentric multi-layer dielectric mirrors having the property of omnidirectional reflection. We show how the lowest-loss TE_01 mode can propagate in a single-mode fashion through even large-core fibers, with other modes eliminated asymptotically by their higher losses and poor coupling, analogous to hollow metallic microwave waveguides. Dispersion, radiation leakage, material absorption, nonlinearities, bending, acircularity, and interface roughness are considered with the help of leaky modes and perturbation theory, and both numerical results and general scaling relations are presented. We show that cladding properties such as absorption and nonlinearity are suppressed by many orders of magnitude due to the strong confinement in a hollow core, and other imperfections are tolerable, promising that the properties of silica fibers may be surpassed even when nominally poor materials are employed.
RESUMO
Perturbation theory permits the analytic study of small changes on known solutions, and is especially useful in electromagnetism for understanding weak interactions and imperfections. Standard perturbation-theory techniques, however, have difficulties when applied to Maxwell's equations for small shifts in dielectric interfaces (especially in high-index-contrast, three-dimensional systems) due to the discontinuous field boundary conditions--in fact, the usual methods fail even to predict the lowest-order behavior. By considering a sharp boundary as a limit of anisotropically smoothed systems, we are able to derive a correct first-order perturbation theory and mode-coupling constants, involving only surface integrals of the unperturbed fields over the perturbed interface. In addition, we discuss further considerations that arise for higher-order perturbative methods in electromagnetism.
RESUMO
We report a novel physical phenomenon in which a cylindrical shell undergoing a scaling process evolves into an ordered array of filaments upon reaching a characteristic thickness. We observe that the tendency to breakup is related to the material viscosity in a manner reminiscent of capillary instability. However, unlike the classical breakup of a fluid cylinder into droplets, the structural evolution in our system occurs exclusively in the cross sectional plane while uniformity is maintained in the axial direction. We propose a fluid front instability mechanism to account for the observed phenomena. The fleeting evolution of fluid breakup from a thin film to a filament array is captured in the frozen state by a thermal drawing process which results in extended lengths of solid sub-100 nm filaments encapsulated within a polymer fiber. Hundreds of glassy semiconductor filament arrays are precisely oriented within a polymer fiber matrix making electrical connections trivial. This approach offers unique opportunities for fabrication of nanometer scale devices of unprecedented lengths allowing simplified access and connectivity.
RESUMO
Virtually all electronic and optoelectronic devices necessitate a challenging assembly of conducting, semiconducting and insulating materials into specific geometries with low-scattering interfaces and microscopic feature dimensions. A variety of wafer-based processing approaches have been developed to address these requirements, which although successful are at the same time inherently restricted by the wafer size, its planar geometry and the complexity associated with sequential high-precision processing steps. In contrast, optical-fibre drawing from a macroscopic preformed rod is simpler and yields extended lengths of uniform fibres. Recently, a new family of fibres composed of conductors, semiconductors and insulators has emerged. These fibres share the basic device attributes of their traditional electronic and optoelectronic counterparts, yet are fabricated using conventional preform-based fibre-processing methods, yielding kilometres of functional fibre devices. Two complementary approaches towards realizing sophisticated functions are explored: on the single-fibre level, the integration of a multiplicity of functional components into one fibre, and on the multiple-fibre level, the assembly of large-scale two- and three-dimensional geometric constructs made of many fibres. When applied together these two approaches pave the way to multifunctional fabric systems.
RESUMO
We demonstrate the fabrication of an all-dielectric omnidirectional mirror for visible frequencies. The dielectric reflector consists of a stack of 19 alternating layers of tin (IV) sulfide and silica. Using a combination of thermal evaporation (for tin sulfide) and thick electron-beam evaporation (for silica), we have achieved a refractive-index contrast of 2.6/1.46 , one of the highest refractive-index contrasts demonstrated in one-dimensional photonic bandgap systems designed for the visible frequency range. The tin sulfide-silica material system developed allowed the formation of a broadband visible reflector with an omnidirectional range greater than 10%. Possible applications of the system include efficient reflectors, high-frequency waveguides for communications and power delivery, and high- Q cavities.
RESUMO
We show that modes of axially uniform waveguides of arbitrary cross section can be made to have anomalous dispersion relations resulting from strong repulsion between two modes. When the axial wave vector k is 0, the two modes have different TE/TM symmetry and thus can be brought arbitrarily close to an accidental frequency degeneracy. For nonzero k, the symmetry is broken causing the modes to repel. When the modes are sufficiently close together this repulsion leads to unusual features such as extremely flattened dispersion relations, backward waves, zero group velocity for nonzero k, atypical divergence of the density of states, and nonzero group velocity at k=0.
RESUMO
A material system for broadband thermal IR applications based on branched polyethylene and tellurium is introduced. This system exhibits low absorption losses from 3.5 to 35 microm , has a large index contrast, and is readily deposited as a thin film. These unique features were used to investigate the formation of an omnidirectional reflector that exhibits two distinct, broadband omnidirectional ranges at thermal wavelengths. Reflectivity measurements are presented that confirm the existence of two omnidirectional ranges in the solar atmospheric windows extending from 8 to 12 microm and from 4.5 to 5.5 microm . The measurements are in good agreement with simulations.
RESUMO
We demonstrate that one-dimensional photonic crystal structures (such as multilayer films) can exhibit complete reflection of radiation in a given frequency range for all incident angles and polarizations. We derive a general criterion for this behavior that does not require materials with very large indices. We perform numerical studies that illustrate this effect.
RESUMO
An all-dielectric coaxial waveguide that can overcome problems of polarization rotation and pulse broadening in the transmission of optical light is presented here. It consists of a coaxial waveguiding region with a low index of refraction, bounded by two cylindrical, dielectric, multilayer, omnidirectional reflecting mirrors. The waveguide can be designed to support a single mode whose properties are very similar to the unique transverse electromagnetic mode of a traditional metallic coaxial cable. The new mode has radial symmetry and a point of zero dispersion. Moreover, because the light is not confined by total internal reflection, the waveguide can guide light around very sharp corners.
RESUMO
A design criterion that permits truly omnidirectional reflectivity for all polarizations of incident light over a wide selectable range of frequencies was used in fabricating an all-dielectric omnidirectional reflector consisting of multilayer films. The reflector was simply constructed as a stack of nine alternating micrometer-thick layers of polystyrene and tellurium and demonstrates omnidirectional reflection over the wavelength range from 10 to 15 micrometers. Because the omnidirectionality criterion is general, it can be used to design omnidirectional reflectors in many frequency ranges of interest. Potential uses depend on the geometry of the system. For example, coating of an enclosure will result in an optical cavity. A hollow tube will produce a low-loss, broadband waveguide, whereas a planar film could be used as an efficient radiative heat barrier or collector in thermoelectric devices.