RESUMO
The proper process of applying heat to many technological devices is a significant challenge. There are many nanofluids of different sizes used inside the system. The current study combines this potential to improve convection effects, considering numerical simulations of natural convection using Cu/water nanofluids in a square enclosure with bottom blocks embedded in baffles. The enclosure consists of two vertical walls with isothermal boundary conditions; the left wall is the sinusoidal heat source, whereas the right wall is cooled. The investigations dealt with the influences of nanoparticle concentration, Rayleigh number, baffle length, and thermal conductivity ratioon isotherms, stream functions, and average Nusselt number. The results present that, when the Rayleigh number rises, the fluid flow velocity increases, and the heat transfer improves. Furthermore, the baffle length case (Lb = 0.3) provides higher heat transfer characteristics than other baffle height cases.
Assuntos
Convecção , Temperatura Alta , Temperatura , Condutividade Térmica , ÁguaRESUMO
The corrosion of metals, i.e., the initiation and acceleration of the surface deterioration of metals through an electrochemical reaction with the surrounding intrusive environment, is a global concern because of the economic and environmental impacts. Corrosion inhibitors are considered the most practical choice among the available corrosion protection techniques due to their effectiveness in terms of functionality and cost. The use of traditional and toxic corrosion inhibitors has led to environmental issues, arousing the need for green counterparts that are environmentally friendly, easily accessible, biodegradable, and cost-effective. In this review, the utilization of green corrosion inhibitors purely acquired from renewable sources is explored, with an in-depth focus on the recent advancements in the use of fruit and vegetable extracts as green corrosion inhibitors. In particular, fruits and vegetables are natural sources of various phytochemicals that exhibit key potential in corrosion inhibition. To shed light on the true potential of such extracts in the protection of steel in acidic environments, the experimental techniques involved in corrosion inhibition and the mechanism of corrosion inhibition are discussed in detail. The study highlights the potential of fruit and vegetable extracts as non-toxic, economical, and effective corrosion inhibitors in the pursuit of green chemistry. In addition to discussing and outlining the current status and opportunities for employing fruit and vegetable extracts as corrosion inhibitors, the current review outlines the challenges involved in the utilization of such extracts in corrosion inhibition.
Assuntos
Frutas , Verduras , Corrosão , Extratos Vegetais , AçoRESUMO
Heat and mass transfer rate by using nanofluids is a fundamental aspect of numerous industrial processes. Its importance extends to energy efficiency, product quality, safety, and environmental responsibility, making it a key consideration for industries seeking to improve their operations, reduce costs, and meet regulatory requirements. So, the principal objective of this research is to analyze the heat and mass transfer rate for three-dimensional magneto hydrodynamic nanoliquid movement with thermal radiation and chemical reaction over the dual stretchable surface in the existence of an inclined magnetization, and viscous dissipation. The flow is rotating with constant angular speed [Formula: see text] about the axis of rotation because such flows occur in the chemical processing industry and the governing equations of motion, energy, and concentration are changed to ODEs by transformation. The complex and highly nonlinear nature of these equations makes them impractical to solve analytically so tackled numerically at MATLAB. The obtained numerical results are validated with literature and presented through graphs and tables. Increasing the Eckert number from [Formula: see text] a higher Nusselt and Sherwood number was noted for the hybrid nanofluid. By changing the angle of inclination [Formula: see text], the [Formula: see text] performance is noted at 8% for nanofluid and 33% for hybrid nanofluid. At the same time, [Formula: see text] performance of 0.5% and 2.0% are observed respectively. Additionally, as the angle of inclination increases the skin friction decreases and the chemical reaction rate increases the mass transmission rate.
RESUMO
In comparison to Newtonian fluids, non-Newtonian fluids have fascinating features in heat transportation. Here, newly type of Reiner-Rivlinnanoliquid flow over the revolving disk for viscous dissipation (VD) is being explored in a multiple-slip effect. The inclusion of gyrotactic microorganisms in the nanoliquid enhances the tendency of the nanoparticles. The idea of the intended model is enhanced by considering in the impact of activation energy, thermal radiative, heated convective conditions and entropy minimization. The system of nonlinear PDE is constructed into nonlinear ODE's by applying the von-Karman similarity method and later solved numerically using the BVP4c solver which is considered to study the complicated ordinary differential equations. TheInfluence of various parameters is elaborated and plotted physically through the graphical illustration. By contrasting the reported data in the restricted form to a previously published article, the accuracy of the current model has examined. The impact of a non-Newtonian fluid parameter over the velocity field appeared to showdpreciation in it. The results elucidate that when the wall slip coefficient is larger more torque is needed to maintain constant disk revaluation. Surface heat transmission and wall skin friction are computed for a wide variety of factors. These flows have several real world-applications, including modeling cases that occur in oceanography and geophysics, various industrial fields (such as lumber production).
RESUMO
The current problem is concerned with the study of magnetohydrodynamic ternary hybrid nanofluid flow over two distinct geometries i.e., cone and wedge. The ternary hybrid nanoliquid with MHD has a lot of engineering and industrial applications. In polymer data processing, cone and wedge geometries are frequently utilized. Therefore, the present problem is designed to the flow of ternary hybrid nanoliquid over multiple geometries. Hybrid nanoliquids performed well in the heat transport rate as compared to the nanoliquid and conventional liquid. Here in this study, the idea of ternary hybrid nanoliquid is introduced to improve the energy and mass transmissions which show more satisfactory results in the thermal and mass transmission performance. The impacts of chemical reaction and thermal radiation are also executed in this model. The formulation of the present study is performed in the form of PDEs which are then transformed into the ODEs by using suitable similarity transformations. The homotopic analysis scheme is implemented for the semi-analytical solution of the existing model. Some major results that materialize from the present simplification are that; the tri-hybrid nanoliquid velocity is greater for the rising nanoparticles volume fractions. The enlargement in radiation parameter enlarged the tri-hybrid nanoliquid thermal profile. The mass transfer rate of the ternary hybrid nanoliquid is lesser for the Schmidt number and chemical reaction. Intensification in nanoparticles volume fractions and radiation parameter has increased the ternary hybrid nanofluid heat rate transfer for both cone and wedge geometries.
RESUMO
The flow of fluid over a spinning disk has a broad scope of numerous applications. It is employed in various things, including medical equipment, the braking system of cars, gas turbines, plastic films, and glass production. As a result of these applications, we considered the phenomena of Darcy Forchheimer's three-dimensional flow on TiO2-Fe3O4 nanoparticles suspended in based CMC-water fluid. The influence of thermal radiation and convective conditions is studied. Moreover, the Buongiorno model is utilized to compute the Brownian motion and the thermophoretic effect. To generate the non-dimensionalized governing equations, suitable alterations are put into use. These equations are then utilized with Matlab BVP4c. Graphs are used to analyze the behavior of velocity distributions, and thermal and concentration profiles at different parameter values. In addition, the solutions to the flow problem have been analyzed in terms of several other physical variables on velocity, temperature, concentration, drag force, heat, and mass transfer. According to the findings, it is clear that an escalates in the value of the rotation parameter leads to an increase in the radial velocity and axial velocity. In contrast, an opposite pattern is followed in the Forchheimer number. Finally, some engineering quantities are evaluated numerically and presented in tabular forms.
RESUMO
The current article aims to examine the magnetohydrodynamics (MHD) impact on the flow of MgO-Ag/water-based hybrid nanoliquid with motile microorganisms and the fluid is allowed to flow over a Riga plate subject to slip effects and activation energy. Furthermore, the presence of a uniform heat source/sink is also addressed in the energy equation. In addition to this, the thermophoresis effect is highlighted in the concentration equation. From the present proposed model, we get a non-linear system of the governing equations. The obtained system of partial differential equations (PDEs) is converted to the dimensionless system of ordinary differential equations (ODEs) using the similarity transformation. The obtained high non-linear system of equations has been solved numerically, using the parametric continuation method (PCM). In the present analysis, the main motivation is to highlight the heat transfer rate of MgO-Ag/water-based hybrid nanofluid flow over a Riga plate. The second motivation of the present research is to highlight the impact of slip conditions on the velocity, energy, and mass profiles. From the graphical analysis, it is depicted that the slip conditions reduce the velocity, energy, and mass outlines. From the present analysis, we concluded that volume friction reduced the flow profile while increasing the temperature of the fluid flow over a Riga plate. All the parameters of the present research are highlighted in velocity temperature and concertation of the fluid. In addition to this in all the figures we have compared the hybrid nanofluid with mono nanofluid and the also the comparison between slip and no-slip conditions have carried out through graphs for velocity, temperature, and concentration.
RESUMO
A hybrid energy cycle (HEC) based on biomass gasification can be suggested as an efficient, modern and low-carbon energy power plant. In the current article, a thermodynamic-conceptual design of a HEC based on biomass and solar energies has been developed in order to generate electric power, heat and hydrogen energy. The planned HEC consists of six main units: two electric energy production units, a heat recovery unit (HRU), a hydrogen energy generation cycle based on water electrolysis, a thermal power generation unit (based on LFR field), and a biofuel production unit (based on biomass gasification process). Conceptual analysis is based on the development of energy, exergy and exergoeconomic assessments. Besides that, the reduction rate of pollutant emission through the planned HEC compared to conventional power plants is presented. In the planned HEC, when hydrogen energy is not needed, excess hydrogen is feed into the combustion chamber to improve system performance and reduce the need for natural gas. Accordingly, the rate of polluting gases emitted from the cycle can be mitigated due to the reduction of fossil fuels consumption. Further, based on the machine learning technique (MLT), the level of biofuel produced from the mentioned process is estimated. In this regard, two algorithms (i.e., Support vector machine and Gaussian process regression) have been employed to develop the prediction model. The findings indicated that the considered HEC can produce about 10.2 MW of electricity, 153 kW of thermal power, and 71.8 kmol/h of hydrogen energy. In both training and testing sets, the Support vector machine model exhibits better behavior compared the two Gaussian process regression model. Based on machine learning technique, with increasing gasification pressure, the level of biofuel obtained from the process does not increase significantly.
Assuntos
Biocombustíveis , Gás Natural , Biomassa , Carbono , Hidrogênio , TermodinâmicaRESUMO
The temperature dependent thermophysical fluid properties have numerous aspects in different industries and engineering processes in which heat transmission is based on fluid flow. For such heat transmission processes, heat transmission system is highly fluctuated with variation of viscosity. Thus, the aim of this study is to investigate the transfer of heat in magnetized Carreau fluid with chemical reaction and under influence of thermal radiation over nonlinear stretching/shrinking surface. Additionally, we have incorporated variable heat dependent thermophysical properties to analyze the heat transfer in magnetized Carreau fluid. Set of flow governing non linear PDE's are obtained using Carreau fluid tensor and boundary layer approximation (BLA) theory. Dimensionless set of ODE's are obtained using suitable similarity transforms. Shooting method in conjunction with Newton's method have been utilized to solve the problem. It is noted that when stretching [Formula: see text] is significant with strictly increasing mass suction [Formula: see text] shear stress rate increase with minor levels and sharp increase has been observed in Nusselt number, whereas in shrinking case [Formula: see text] shear stress and heat transfer coefficient values are improved raising the value of [Formula: see text] mass suction. Further, raising the values of power law index [Formula: see text] produce reduced skin friction over stretching surface [Formula: see text] while skin friction dramatically enhance in shrinking case [Formula: see text]. It is observed that raising the non-linearity [Formula: see text] values for stretching or shrinking, skin friction and Nusselt number considerably improved. Moreover, computational outcomes of the study are validated with already published previous results and the results obtained in this study are found in good agreement.
RESUMO
In the present study, a biomass-based multi-purpose energy system that can generate power, desalinated water, hydrogen, and ammonia is presented. The gasification cycle, gas turbine, Rankine cycle, PEM electrolyzer, ammonia production cycle using the Haber-Bosch process, and MSF water desalination cycle are the primary subsystems of this power plant. On the suggested system, a thorough thermodynamic and thermoeconomic evaluation has been conducted. For the analysis, the system is first modeled and investigated from an energy point of view, after which it is similarly studied from an exergy point of view before the system is subjected to economic analysis (exergoeconomic analysis). The system is evaluated and modeled using artificial intelligence to aid in the system optimization process after energy, exergy, and economic modeling and analysis. The resulting model is then optimized using a genetic algorithm to maximize system efficiency and reduce system expenses. EES software does the first analysis. After that, it sends the data to MATLAB program for optimization and to see how operational factors affect thermodynamic performance and overall cost rate. To find the best solution with the maximum energy efficiency and lowest total cost, multi-objective optimization is used. In order to shorten computation time and speed up optimization, the artificial neural network acts as a middleman in the process. In order to identify the energy system's optimal point, the link between the objective function and the choice factors has been examined. The results show that increasing the flow of biomass enhances efficiency, output, and cost while raising the temperature of the gas turbine's input decreases cost while simultaneously boosting efficiency. Additionally, according to the system's optimization results, the power plant's cost and energy efficiency are 37% and 0.3950$/s, respectively, at the ideal point. The cycle's output is estimated at 18900 kW at this stage.
Assuntos
Amônia , Inteligência Artificial , Fenômenos Físicos , Temperatura Baixa , ÁguaRESUMO
This communication elaborates the irreversibility analysis of the flow of Prandtl nanofluid along with thermal radiation past a permeable stretched surface embedded in a Darcy-Forchheimer medium. The activation and chemical impressions along with effects of thermophoretic and Brownian motion are as well examined. The flow symmetry of the problem is modeled mathematically and leading equations are rehabilitated into nonlinear ordinary differential equations (ODEs) through the assistance of suitable similarity variables. The Keller-box technique in MATLAB is employed to draw the impacts of the contributing elements on the velocity field, temperature distribution, and concentration. The impact of the Prandtl fluid parameter has mounting performance for the velocity whereas conflicting behavior is examined in the temperature profile. The achieved numerical results are matched correspondingly with the present symmetrical solutions in restrictive cases and fantastic agreement is scrutinized. In addition, the entropy generation uplifts for the growing values of the Prandtl fluid parameter, thermal radiation, and Brinkman number and decreases for growing numbers of the inertia coefficient parameter. It is also discovered that the coefficient of friction decreases for all parameters involved in the momentum equation. Features of nanofluids can be found in a variety of real-world fields, including microfluidics, industry, transportation, the military, and medicine.
RESUMO
This work presented modeling and simulation of CO2 from natural gas. One of the most promising technologies is Pressure Swing Adsorption (PSA), which is an energy-efficient and cost-effective process for separating and capturing CO2 from industrial processes and power plants. This paper provides an overview of the PSA process and its application for CO2 capture, along with a discussion of its advantages, limitations, and future research directions. This process is pressure swing adsorption (PSA) with four adsorption beds. The adsorption bed columns fill with activated carbon as adsorbent. In this simulation momentum, mass and energy balance are solved simultaneously. The process was designed with two beds in adsorption conditions and the other two beds in desorption conditions. The desorption cycle includes blow-down and purge steps. The linear driving force (LDF) estimates the adsorption rate in modeling this process. The extended Langmuir isotherm is used for the equilibrium between solid and gas phases. The temperature changes by heat transfer from the gas phase to solid and axial heat dispersion. The set of partial differential equations is solved using implicit finite difference.
Assuntos
Dióxido de Carbono , Gás Natural , Carvão Vegetal , Adsorção , Temperatura AltaRESUMO
This research analyzes the three-dimensional magneto hydrodynamic nanofluid flow through chemical reaction and thermal radiation above the dual stretching surface in the presence of an inclined magnetic field. Different rotational nanofluid and hybrid nanofluids with constant angular velocity [Formula: see text] for this comparative study are considered. The constitutive relations are used to gain the equations of motion, energy, and concentration. This flow governing extremely non-linear equations cannot be handled by an analytical solution. So, these equations are transformed into ordinary differential equalities by using the similarity transformation and then handled in MATLAB by applying the boundary values problem practice. The outcomes for the considered problem are accessed through tables and graphs for different parameters. A maximum heat transfer amount is observed in the absence of thermal radiation and when the inclined magnetic field and axis of rotation are parallel.
RESUMO
The dominant characteristics of hybrid nanofluids, including rapid heat transfer rates, superior electrical and thermal conductivity, and low cost, have effectively piqued the interest of global researchers. The current study will look at the impacts of a silver and cobalt ferrite-based hybrid nanofluid with MHD between a revolving disk and cone. The collection of partial differentiable equations is converted into a set of ODEs via similarity transformations. We used the Homotopy analysis approach from the BVPh 2.0 package to solve the ordinary differential equations. The volume proportion of nanoparticles increases and the temperature distribution profile also increased. It is more efficient for metallurgical, medicinal, and electrical applications. Furthermore, the antibacterial capabilities of silver nanoparticles might be used to restrict the growth of bacteria. A circulating disc with a stationary cone has been identified to provide the optimal cooling of the cone disc device while maintaining the outer edge temperature constant. This study's findings might be useful in materials science and engineering. The usage of hybrid nanofluid in heat transfer and heat pumps, coolants in manufacturing and production, producing cooling, refrigerators, solar thermal collectors, and heating, air conditioning, and climate control applications are only a few examples.
RESUMO
Due to enhanced heat transfer rate, the nanofluid and hybrid nanofluids have significant industrial uses. The principal objective of this exploration is to investigate how thermal radiation influences the velocity and temperature profile. A water-based rotational nanofluid flow with constant angular speed [Formula: see text] is considered for this comparative study. A similarity conversion is applied to change the appearing equations into ODEs. Three different nanoparticles i.e., copper, aluminum, and titanium oxide are used to prepare different nanofluids for comparison. The numerical and graphical outputs are gained by employing the bvp-4c procedure in MATLAB. The results for different constraints are represented through graphs and tables. Higher heat transmission rate and minimized skin friction are noted for triple nanoparticle nanofluid. Skin coefficients in the x-direction and y-direction have reduced by 50% in trihybrid nanofluid by keeping mixed convection levels between the range [Formula: see text]. The heat transmission coefficient with raising the levels of thermal radiation between [Formula: see text] and Prandlt number [Formula: see text] has shown a 60% increase.
RESUMO
Heat transfer at industrial levels has been revolutionized with the advancement of nanofluid and hybrid nanofluid. Keeping this development in view, this article aims to present the rate of heat transfer for conventional and hybrid nanofluids, incorporating the Hall Effect over a stretchable surface. The flow governing equations are obtained with the help of suitable assumptions, and the problem is attempted with the boundary value problem technique in MATLAB. The highly non-linear partial differential equations are transformed into non-dimensional forms using suitable similarity transforms. The criterion of convergence for solution or tolerance of a problem is adjusted to 10-7. Water is considered as a base fluid; copper (Cu) and silver (Ag) nanoparticles are mixed to obtain nanofluid. This novel work is incorporated for conventional and hybrid nanofluid with the effect of Hall current above the stretching/shrinking surface. Increasing the Stefan blowing parameter reduces the flow rate; it increases the heat transfer rate and nano-particle concentration of conventional and hybrid nanofluid. Both velocity components decreases by increasing the magnetic field. The Hall Effect also decreases the velocity of nanofluid. The outcomes are compared to previously published work, demonstrating that the existing study is legitimate. The heat transfer rate of the hybrid nanofluid is higher than the convential nanofluid. This study suggests more frequent use of hybrid nanofluid because of high heat transfer rates and reduced skin friction.
RESUMO
The current evaluation described the flow features of Darcy Forchhemier hybrid nanoliquid across a slender permeable stretching surface. The consequences of magnetic fields, second order exothermic reaction, Hall current and heat absorption and generation are all accounted to the fluid flow. In the working fluid, silicon dioxide (SiO2) and titanium dioxide (TiO2) nano particulates are dispersed to prepare the hybrid nanoliquid. TiO2 and SiO2 NPs are used for around 100 years in a vast number of diverse products. The modeled has been designed as a nonlinear set of PDEs, Which are degraded to the dimensionless system of ODEs by using the similarity transformation. The reduced set of nonlinear ODEs has been numerically estimated through bvp4c package. The outcomes are tested for validity and consistency purpose with the published report and the ND solve technique. It has been noted that the energy curve lessens with the influence of thermodiffusion, Brownian motion and rising number of nanoparticles, while boosts with the result of magnetic field. Furthermore, the concentration outline of hybrid nanoliquid improves with the upshot of chemical reaction.
RESUMO
The ongoing research aims to examine the mass and heat transmission phenomena of squeezing flow between two concentric cylinders under the effect of heat sources and magnetic fields. The impacts of the Lorentz force on the behavior of the liquid flow are elucidated via a magnetic field incorporated in the momentum equation. Furthermore, within concentric cylinders, the expression [Formula: see text] has been employed as a source/sink. The proposed model of PDEs formulates the physical phenomena of time-dependent incompressible two-dimensional squeezing flow via modified Navier-Stokes equation, energy equation, and mass transfer equation, and variable magnetic field. The proposed model involved a highly nonlinear system of PDEs, which has been reduced into a system of ODEs via Lie group of similarity transformation and subsequently solved numerically in MATLAB by Parametric Continuation Method. The direct impact of the squeezing parameter on the profile of temperature and concentration has been observed. The results shown that an increment in the heat source indicates a decline in the liquid temperature profile, that an increment in the heat source indicates a decline in the liquid temperature profile. An increment in the heat source indicates a decline in the liquid temperature prof. At the same time, an inverse relationship is observed for the concentration profile. Therefore, we have witnessed a significant increase in the velocity profiles of the flow, mainly as a result of the heat absorption coefficient. In addition, the declining effect of the Soret number on the concentration profile is noticed. It has been found that it enhanced the entropy generation rate for Pr, [Formula: see text], and Ec, while an opposite impact has been noticed at the Bejan number. The numerical outcomes of the proposed model that explain fluid flow characteristics and fluid flow characteristics are quantitatively elucidated by tables and displayed graphically. The comparison of two numerical results in the cases are found to be in good agreement, as shown in Tables.
RESUMO
Cancer is clearly a major cause of disease and fatality around the world, yet little is known about how it starts and spreads. In this study, a model in mathematical form of breast cancer guided by a system of (ODE'S) ordinary differential equations is studied in depth to examine the thermal effects of various shape nanoparticles on breast cancer hyperthermia therapy in the existence of a porous media with fractional derivative connection, when utilizing microwave radiative heating. The unsteady state is determined precisely using the Laplace transform approach to crop a more decisive examination of temperature dissemination of blood temperature inside the breast tissues. Durbin's and Zakian's techniques are used to find Laplace inversion. Mild temperature hyperthermia is used in the treatment, which promotes cell death by increasing cell nervousness to radiation therapy and flow of blood in tumor. In the graphical findings, we can witness the distinct behavior of hyperthermia therapy on tumor cells by applying various metabolic heat generation rates across various time intervals to attain the optimal therapeutic temperature point. Particularly, we used graphs to visualize the behavior of different Nanoparticles with different shaped during hypothermia therapy. In comparison to other nanoparticles and shapes, it demonstrates that gold nanoparticles with a platelet shape are the best option for improving heat transmission. Which assess of heat transfer up to 16.412%.
RESUMO
The outcome of Newtonian heating on the viscoelastic fluid plays a vital role in daily life applications such as conjugate heat transfer around fins, heat exchanger, solar radiation, petroleum industry, etc. Also, rotation of viscoelastic fluid has various importance in product-making industries and engineering. Viscoelastic dusty fluids and Newtonian heating are applicable in nuclear reactors, gas cooling systems, control temperature of the system and centrifugal separators, etc. Therefore, based on this motivation, the present study presents the Newtonian heating effect on the dusty viscoelastic fluid. Additionally, a free convective heat transfer is taken for Couette flow in a rotating frame along with a uniform applied magnetic field. The dust particles possess complex velocities due to rotation and therefore it is the combination of the primary and secondary velocities. For the specified flow, the entropy generation and Bejan number are also computed. Poincare-Light Hill technique has been used for the solution of the system of partial differential equations. The velocity profile for dust particles and fluid are discussed in this article. The influence of different parameters on the Nusselt number, temperature profile, velocity of fluid and dust particle is discussed thoroughly.