Depolymerizing kinesins Kip3 and MCAK shape cellular microtubule architecture by differential control of catastrophe.

Microtubules are dynamic filaments whose ends alternate between periods of slow growth and rapid shortening as they explore intracellular space and move organelles. A key question is how regulatory proteins modulate catastrophe, the conversion from growth to shortening. To study this process, we reconstituted microtubule dynamics in the absence and presence of the kinesin-8 Kip3 and the kinesin-13 MCAK. Surprisingly, we found that, even in the absence of the kinesins, the microtubule catastrophe frequency depends on the age of the microtubule, indicating that catastrophe is a multistep process. Kip3 slowed microtubule growth in a length-dependent manner and increased the rate of aging. In contrast, MCAK eliminated the aging process. Thus, both kinesins are catastrophe factors; Kip3 mediates fine control of microtubule length by narrowing the distribution of maximum lengths prior to catastrophe, whereas MCAK promotes rapid restructuring of the microtubule cytoskeleton by making catastrophe a first-order random process.

Rapid microtubule self-assembly kinetics.

Microtubule assembly is vital for many fundamental cellular processes. Current models for microtubule assembly kinetics assume that the subunit dissociation rate from a microtubule tip is independent of free subunit concentration. Total-Internal-Reflection-Fluorescence (TIRF) microscopy experiments and data from a laser tweezers assay that measures in vitro microtubule assembly with nanometer resolution, provides evidence that the subunit dissociation rate from a microtubule tip increases as the free subunit concentration increases. These data are consistent with a two-dimensional model for microtubule assembly, and are explained by a shift in microtubule tip structure from a relatively blunt shape at low free concentrations to relatively tapered at high free concentrations. We find that because both the association and the dissociation rates increase at higher free subunit concentrations, the kinetics of microtubule assembly are an order-of-magnitude higher than currently estimated in the literature.

Low tension recruits the yeast Aurora B protein Ipl1 to centromeres in metaphase.

Accurate genome segregation in mitosis requires that all chromosomes are bioriented on the spindle. Cells monitor biorientation by sensing tension across sister centromeres. Chromosomes that are not bioriented have low centromere tension, which allows Aurora B (yeast Ipl1) to perform error correction that locally loosens kinetochore-microtubule attachments to allow detachment of microtubules and fresh attempts at achieving biorientation. However, it is not known whether low tension recruits Aurora B to centromeres or, alternatively, whether low tension directly activates Aurora B already localized at centromeres. In this work, we experimentally induced low tension in metaphase Saccharomyces cerevisiae yeast cells, then monitored Ipl1 localization. We find low tension recruits Ipl1 to centromeres. Furthermore, low tension-induced Ipl1 recruitment depended on Bub1, which is known to provide a binding site for Ipl1. In contrast, Top2, which can also recruit Ipl1 to centromeres, was not required. Our results demonstrate cells are sensitive to low tension at centromeres and respond by actively recruiting Ip1l for error correction.

Kinesin-14 motors participate in a force balance at microtubule plus-ends to regulate dynamic instability.

Kinesin-14 molecular motors represent an essential class of proteins that bind microtubules and walk toward their minus-ends. Previous studies have described important roles for Kinesin-14 motors at microtubule minus-ends, but their role in regulating plus-end dynamics remains controversial. Kinesin-14 motors have been shown to bind the EB family of microtubule plus-end binding proteins, suggesting that these minus-end-directed motors could interact with growing microtubule plus-ends. In this work, we explored the role of minus-end-directed Kinesin-14 motor forces in controlling plus-end microtubule dynamics. In cells, a Kinesin-14 mutant with reduced affinity to EB proteins led to increased microtubule lengths. Cell-free biophysical microscopy assays were performed using Kinesin-14 motors and an EB family marker of growing microtubule plus-ends, Mal3, which revealed that when Kinesin-14 motors bound to Mal3 at growing microtubule plus-ends, the motors subsequently walked toward the minus-end, and Mal3 was pulled away from the growing microtubule tip. Strikingly, these interactions resulted in an approximately twofold decrease in the expected postinteraction microtubule lifetime. Furthermore, generic minus-end-directed tension forces, generated by tethering growing plus-ends to the coverslip using λ-DNA, led to an approximately sevenfold decrease in the expected postinteraction microtubule growth length. In contrast, the inhibition of Kinesin-14 minus-end-directed motility led to extended tip interactions and to an increase in the expected postinteraction microtubule lifetime, indicating that plus-ends were stabilized by nonmotile Kinesin-14 motors. Together, we find that Kinesin-14 motors participate in a force balance at microtubule plus-ends to regulate microtubule lengths in cells.

UNC-45A breaks the microtubule lattice independently of its effects on non-muscle myosin II.

In invertebrates, UNC-45 regulates myosin stability and functions. Vertebrates have two distinct isoforms of the protein: UNC-45B, expressed in muscle cells only, and UNC-45A, expressed in all cells and implicated in regulating both non-muscle myosin II (NMII)- and microtubule (MT)-associated functions. Here, we show that, in vitro and in human and rat cells, UNC-45A binds to the MT lattice, leading to MT bending, breakage and depolymerization. Furthermore, we show that UNC-45A destabilizes MTs independent of its C-terminal NMII-binding domain and even in the presence of the NMII inhibitor blebbistatin. These findings identified UNC-45A as a novel type of MT-severing protein with a dual non-mutually exclusive role in regulating NMII activity and MT stability. Because many human diseases, from cancer to neurodegenerative diseases, are caused by or associated with deregulation of MT stability, our findings have profound implications in the biology of MTs, as well as the biology of human diseases and possible therapeutic implications for their treatment.This article has an associated First Person interview with the joint first authors of the paper.

Chromosome congression by Kinesin-5 motor-mediated disassembly of longer kinetochore microtubules.

During mitosis, sister chromatids congress to the spindle equator and are subsequently segregated via attachment to dynamic kinetochore microtubule (kMT) plus ends. A major question is how kMT plus-end assembly is spatially regulated to achieve chromosome congression. Here we find in budding yeast that the widely conserved kinesin-5 sliding motor proteins, Cin8p and Kip1p, mediate chromosome congression by suppressing kMT plus-end assembly of longer kMTs. Of the two, Cin8p is the major effector and its activity requires a functional motor domain. In contrast, the depolymerizing kinesin-8 motor Kip3p plays a minor role in spatial regulation of yeast kMT assembly. Our analysis identified a model where kinesin-5 motors bind to kMTs, move to kMT plus ends, and upon arrival at a growing plus end promote net kMT plus-end disassembly. In conclusion, we find that length-dependent control of net kMT assembly by kinesin-5 motors yields a simple and stable self-organizing mechanism for chromosome congression.

Mechanism of microtubule lumen entry for the α-tubulin acetyltransferase enzyme αTAT1.

Microtubules are structural polymers inside of cells that are subject to posttranslational modifications. These posttranslational modifications create functionally distinct subsets of microtubule networks in the cell, and acetylation is the only modification that takes place in the hollow lumen of the microtubule. Although it is known that the α-tubulin acetyltransferase (αTAT1) is the primary enzyme responsible for microtubule acetylation, the mechanism for how αTAT1 enters the microtubule lumen to access its acetylation sites is not well understood. By performing biochemical assays, fluorescence and electron microscopy experiments, and computational simulations, we found that αTAT1 enters the microtubule lumen through the microtubule ends, and through bends or breaks in the lattice. Thus, microtubule structure is an important determinant in the acetylation process. In addition, once αTAT1 enters the microtubule lumen, the mobility of αTAT1 within the lumen is controlled by the affinity of αTAT1 for its acetylation sites, due to the rapid rebinding of αTAT1 onto highly concentrated α-tubulin acetylation sites. These results have important implications for how acetylation could gradually accumulate on stable subsets of microtubules inside of the cell.

Suppression of microtubule assembly kinetics by the mitotic protein TPX2.

TPX2 is a widely conserved microtubule-associated protein that is required for mitotic spindle formation and function. Previous studies have demonstrated that TPX2 is required for the nucleation of microtubules around chromosomes; however, the molecular mechanism by which TPX2 promotes microtubule nucleation remains a mystery. In this study, we found that TPX2 acts to suppress tubulin subunit off-rates during microtubule assembly and disassembly, thus allowing for the support of unprecedentedly slow rates of plus-end microtubule growth, and also leading to a dramatically reduced microtubule shortening rate. These changes in microtubule dynamics can be explained in computational simulations by a moderate increase in tubulin-tubulin bond strength upon TPX2 association with the microtubule lattice, which in turn acts to reduce the departure rate of tubulin subunits from the microtubule ends. Thus, the direct suppression of tubulin subunit off-rates by TPX2 during microtubule growth and shortening could provide a molecular mechanism to explain the nucleation of new microtubules in the presence of TPX2.

Coordination of autophagosome-lysosome fusion and transport by a Klp98A-Rab14 complex in Drosophila.

Degradation of cellular material by autophagy is essential for cell survival and homeostasis, and requires intracellular transport of autophagosomes to encounter acidic lysosomes through unknown mechanisms. Here, we identify the PX-domain-containing kinesin Klp98A as a new regulator of autophagosome formation, transport and maturation in Drosophila. Depletion of Klp98A caused abnormal clustering of autophagosomes and lysosomes at the cell center and reduced the formation of starvation-induced autophagic vesicles. Reciprocally, overexpression of Klp98A redistributed autophagic vesicles towards the cell periphery. These effects were accompanied by reduced autophagosome-lysosome fusion and autophagic degradation. In contrast, depletion of the conventional kinesin heavy chain caused a similar mislocalization of autophagosomes without perturbing their fusion with lysosomes, indicating that vesicle fusion and localization are separable and independent events. Klp98A-mediated fusion required the endolysosomal GTPase Rab14, which interacted and colocalized with Klp98A, and required Klp98A for normal localization. Thus, Klp98A coordinates the movement and fusion of autophagic vesicles by regulating their positioning and interaction with the endolysosomal compartment.

Microtubule binding distinguishes dystrophin from utrophin.

Dystrophin and utrophin are highly similar proteins that both link cortical actin filaments with a complex of sarcolemmal glycoproteins, yet localize to different subcellular domains within normal muscle cells. In mdx mice and Duchenne muscular dystrophy patients, dystrophin is lacking and utrophin is consequently up-regulated and redistributed to locations normally occupied by dystrophin. Transgenic overexpression of utrophin has been shown to significantly improve aspects of the disease phenotype in the mdx mouse; therefore, utrophin up-regulation is under intense investigation as a potential therapy for Duchenne muscular dystrophy. Here we biochemically compared the previously documented microtubule binding activity of dystrophin with utrophin and analyzed several transgenic mouse models to identify phenotypes of the mdx mouse that remain despite transgenic utrophin overexpression. Our in vitro analyses revealed that dystrophin binds microtubules with high affinity and pauses microtubule polymerization, whereas utrophin has no activity in either assay. We also found that transgenic utrophin overexpression does not correct subsarcolemmal microtubule lattice disorganization, loss of torque production after in vivo eccentric contractions, or physical inactivity after mild exercise. Finally, our data suggest that exercise-induced inactivity correlates with loss of sarcolemmal neuronal NOS localization in mdx muscle, whereas loss of in vivo torque production after eccentric contraction-induced injury is associated with microtubule lattice disorganization.

Geometry and expression enhance enrichment of functional yeast-displayed ligands via cell panning.

Yeast surface display has proven to be an effective tool in the discovery and evolution of ligands with new or improved binding activity. Selections for binding activity are generally carried out using immobilized or fluorescently labeled soluble domains of target molecules such as recombinant ectodomain fragments. While this method typically provides ligands with high affinity and specificity for the soluble molecular target, translation to binding true membrane-bound cellular target is commonly problematic. Direct selections against mammalian cell surfaces can be carried out either exclusively or in combination with soluble target-based selections to further direct towards ligands for genuine cellular target. Using a series of fibronectin domain, affibody, and Gp2 ligands and human cell lines expressing a range of their targets, epidermal growth factor receptor and carcinoembryonic antigen, this study quantitatively identifies the elements that dictate ligand enrichment and yield. Most notably, extended flexible linkers between ligand and yeast enhance enrichment ratios from 1.4 ± 0.8 to 62 ± 57 for a low-affinity (>600 nM) binder on cells with high target expression and from 14 ± 13 to 74 ± 25 for a high-affinity binder (2 nM) on cells with medium valency. Inversion of the yeast display fusion from C-terminal display to N-terminal display still enables enrichment albeit with 40-97% reduced efficacy. Collectively, this study further enlightens the conditions-while highlighting new approaches-that yield successful enrichment of yeast-displayed binding ligands via panning on mammalian cells. Biotechnol. Bioeng. 2016;113: 2328-2341. © 2016 Wiley Periodicals, Inc.

Microtubule assembly dynamics: new insights at the nanoscale.

Although the dynamic self-assembly behavior of microtubule ends has been well characterized at the spatial resolution of light microscopy (~200 nm), the single-molecule events that lead to these dynamics are less clear. Recently, a number of in vitro studies used novel approaches combining laser tweezers, microfabricated chambers, and high-resolution tracking of microtubule-bound beads to characterize mechanochemical aspects of MT dynamics at nanometer scale resolution. In addition, computational modeling is providing a framework for integrating these experimental results into physically plausible models of molecular scale microtubule dynamics. These nanoscale studies are providing new fundamental insights about microtubule assembly, and will be important for advancing our understanding of how microtubule dynamic instability is regulated in vivo via microtubule-associated proteins, therapeutic agents, and mechanical forces.

Rapid binding to protofilament edge sites facilitates tip tracking of EB1 at growing microtubule plus-ends.

EB1 is a key cellular protein that delivers regulatory molecules throughout the cell via the tip-tracking of growing microtubule plus-ends. Thus, it is important to understand the mechanism for how EB1 efficiently tracks growing microtubule plus-ends. It is widely accepted that EB1 binds with higher affinity to GTP-tubulin subunits at the growing microtubule tip, relative to GDP-tubulin along the microtubule length. However, it is unclear whether this difference in affinity alone is sufficient to explain the tip-tracking of EB1 at growing microtubule tips. Previously, we found that EB1 binds to exposed microtubule protofilament-edge sites at a ~70 fold faster rate than to closed-lattice sites, due to diffusional steric hindrance to binding. Thus, we asked whether rapid protofilament-edge binding could contribute to efficient EB1 tip tracking. A computational simulation with differential EB1 on-rates based on closed-lattice or protofilament-edge binding, and with EB1 off-rates that were dependent on the tubulin hydrolysis state, robustly recapitulated experimental EB1 tip tracking. To test this model, we used cell-free biophysical assays, as well as live-cell imaging, in combination with a Designed Ankyrin Repeat Protein (DARPin) that binds exclusively to protofilament-edge sites, and whose binding site partially overlaps with the EB1 binding site. We found that DARPin blocked EB1 protofilament-edge binding, which led to a decrease in EB1 tip tracking on dynamic microtubules. We conclude that rapid EB1 binding to microtubule protofilament-edge sites contributes to robust EB1 tip tracking at the growing microtubule plus-end.

Modeling of chromosome motility during mitosis.

Chromosome motility is a highly regulated and complex process that ultimately achieves proper segregation of the replicated genome. Recent modeling studies provide a computational framework for investigating how microtubule assembly dynamics, motor protein activity and mitotic spindle mechanical properties are integrated to drive chromosome motility. Among other things, these studies show that metaphase chromosome oscillations can be explained by a range of assumptions, and that non-oscillatory states can be achieved with modest changes to the model parameters. In addition, recent microscopy studies provide new insight into the nature of the coupling between force on the kinetochore and kinetochore-microtubule assembly/disassembly. Together, these studies facilitate advancement toward a unified model that quantitatively predicts chromosome motility.

Robust microtubule dynamics facilitate low-tension kinetochore detachment in metaphase.

During mitosis, sister chromatids are stretched apart at their centromeres via their attachment to oppositely oriented kinetochore microtubules. This stretching generates inwardly directed tension across the separated sister centromeres. The cell leverages this tension signal to detect and then correct potential errors in chromosome segregation, via a mechanical tension signaling pathway that detaches improperly attached kinetochores from their microtubules. However, the sequence of events leading up to these detachment events remains unknown. In this study, we used microfluidics to sustain and observe low-tension budding yeast metaphase spindles over multiple hours, allowing us to elucidate the tension history prior to a detachment event. We found that, under conditions in which kinetochore phosphorylation weakens low-tension kinetochore-microtubule connections, the mechanical forces produced via the dynamic growth and shortening of microtubules is required to efficiently facilitate detachment events. Our findings underscore the critical role of robust kinetochore microtubule dynamics in ensuring the fidelity of chromosome segregation during mitosis.

Centromere Tension Measurement in Budding Yeast Mitosis.

During budding yeast mitosis, duplicated chromosomes are aligned at the center of the metaphase mitotic spindle, and the centromeres are stretched by forces generated within the mitotic spindle. In response to these stretching forces, mechanical tension builds up in the centromeric chromatin. The magnitude of this tension is detected by the cell to signal the attachment configuration of the sister chromosomes: a high tension signal would indicate that sister chromosomes are properly attached to opposite spindle poles, while a low tension signal could indicate the lack of a bipolar attachment. A low tension signal drives the cell to correct improper attachments in metaphase, thus preventing potential errors in anaphase chromosome segregation. In this paper, we describe a microscopy-based method to directly measure the magnitude of centromere tension in budding yeast metaphase spindles. The advantage of this method is that quantitative tension estimates are obtained without perturbing spindle and/or chromosome structure and as cells progress normally through mitosis.

Stochastic simulation and graphic visualization of mitotic processes.

Computational modeling can be extremely useful in interpreting experimental results. Here we describe how a relatively sophisticated stochastic model for microtubule dynamic instability in the mitotic spindle can be developed starting with straightforward rules and simple programming code. Once this model is developed, the method for comparing simulation results to experimental data must be carefully considered. The ultimate utility of any computational model relies on its predictive power and the ability to assist in designing new experiments. We describe how "deconstructing" the model through the use of quantitative animations contributes to a better qualitative understanding of model behavior. By extracting key qualitative elements of the model in this fashion, model predictions and new experiments can be more easily extracted from model results.

Straightening up is required to nucleate new microtubules.

In this issue, Ayukawa, Iwata, Imai, and colleagues (2021. J. Cell Biol.https://doi.org/10.1083/jcb.202007033) use rapid temporal and high-spatial-resolution electron microscopy imaging to examine the earliest stages of new microtubule nucleation. They discover that straightening of curved tubulin oligomers increases the efficiency of microtubule nucleation.

Oxidative stress pathogenically remodels the cardiac myocyte cytoskeleton via structural alterations to the microtubule lattice.

In the failing heart, the cardiac myocyte microtubule network is remodeled, which contributes to cellular contractile failure and patient death. However, the origins of this deleterious cytoskeletal reorganization are unknown. We now find that oxidative stress, a condition characteristic of heart failure, leads to cysteine oxidation of microtubules. Our electron and fluorescence microscopy experiments revealed regions of structural damage within the microtubule lattice that occurred at locations of oxidized tubulin. The incorporation of GTP-tubulin into these damaged, oxidized regions led to stabilized "hot spots" within the microtubule lattice, which suppressed the shortening of dynamic microtubules. Thus, oxidative stress may act inside of cardiac myocytes to facilitate a pathogenic shift from a sparse microtubule network into a dense, aligned network. Our results demonstrate how a disease condition characterized by oxidative stress can trigger a molecular oxidation event, which likely contributes to a toxic cellular-scale transformation of the cardiac myocyte microtubule network.