Strain Analysis of GaN HEMTs on (111) Silicon with Two Transitional AlxGa1-xN Layers.

We have designed and then grown a simple structure for high electron mobility transistors (HEMTs) on silicon, where as usual two transitional layers of AlxGa1-xN (x = 0.35, x = 0.17) have been used in order to engineer the induced strain as a result of the large lattice mismatch and large thermal expansion coefficient difference between GaN and silicon. Detailed x-ray reciprocal space mapping (RSM) measurements have been taken in order to study the strain, along with cross-section scanning electron microscope (SEM) images and x-ray diffraction (XRD) curve measurements. It has been found that it is critical to achieve a crack-free GaN HEMT epi-wafer with high crystal quality by obtaining a high quality AlN buffer, and then tuning the proper thickness and aluminium composition of the two transitional AlxGa1-xN layers. Finally, HEMTs with high performance that are fabricated on the epi-wafer have been demonstrated to confirm the success of our strain engineering and above analysis.

Spatially-resolved optical and structural properties of semi-polar [Formula: see text] Al x Ga1-x N with x up to 0.56.

Pushing the emission wavelength of efficient ultraviolet (UV) emitters further into the deep-UV requires material with high crystal quality, while also reducing the detrimental effects of built-in electric fields. Crack-free semi-polar [Formula: see text] Al x Ga1-x N epilayers with AlN contents up to x = 0.56 and high crystal quality were achieved using an overgrowth method employing GaN microrods on m-sapphire. Two dominant emission peaks were identified using cathodoluminescence hyperspectral imaging. The longer wavelength peak originates near and around chevron-shaped features, whose density is greatly increased for higher contents. The emission from the majority of the surface is dominated by the shorter wavelength peak, influenced by the presence of basal-plane stacking faults (BSFs). Due to the overgrowth technique BSFs are bunched up in parallel stripes where the lower wavelength peak is broadened and hence appears slightly redshifted compared with the higher quality regions in-between. Additionally, the density of threading dislocations in these region is one order of magnitude lower compared with areas affected by BSFs as ascertained by electron channelling contrast imaging. Overall, the luminescence properties of semi-polar AlGaN epilayers are strongly influenced by the overgrowth method, which shows that reducing the density of extended defects improves the optical performance of high AlN content AlGaN structures.