Handling Nanoparticle Content in Nanocomposite Thin Films Deposited by Misty Plasma Processes through Controlled Flash Boiling Atomization.

Misty plasma processes based on colloidal solutions sprayed into low-pressure plasmas have recently shown great potential for multifunctional thin film deposition. In such processes, nanoparticle accumulation in ring-shaped structures remains the main obstacle to the synthesis of high-quality coatings containing abundant, small-scale, and evenly dispersed nanoparticles. These local buildups appear after a colloidal droplet evaporates from a substrate. Accordingly, controlling the droplets' size in the spray is of key importance to ensure a uniform nanoparticle content in the plasma-deposited nanocomposite film. In this work, it is shown that the use of more volatile solvents produces finer droplets on the substrate, thereby improving nanoparticle dispersion in the matrix. A one-dimensional evaporation model is further developed and used to show that, contrary to what one might expect, this result cannot be attributed to faster evaporation during droplet transport in the low-pressure plasma. Instead, a so-called "flash" boiling atomization mechanism is discussed to support the experimental findings.

Fabrication of a nickel nanowire mesh electrode suspended on polymer substrate.

We report on an efficient strategy for the fabrication of an ultra-long suspended nanowire mesh suitable for nanodevice architectures on a polymer surface. First, nickel nanowires are synthesized directly on a template substrate by magnetron sputtering. Laser interference lithography followed by deep reactive ion etching is used to create the nanograted template substrate constituted of one-dimensional line pattern arrays of 240 nm in periodicity. Ordered alignment of ultra-long nanowires (∼180 nm in diameter) with high fidelity to the template pattern is observed by scanning electron microscopy. The transfer of the pre-defined parallel nanowire array from the template surface to a target polymer substrate for electrical characterization of the system is demonstrated. The electrical behaviour of the nanowire mesh, suspended between two electrodes, was found to be linear, stable, and reproducible. This result suggests that this nanofabrication process will open an efficient way to the design and construction of novel nanodevices.

Hierarchical carbon nanostructure design: ultra-long carbon nanofibers decorated with carbon nanotubes.

Hierarchical carbon nanostructures based on ultra-long carbon nanofibers (CNF) decorated with carbon nanotubes (CNT) have been prepared using plasma processes. The nickel/carbon composite nanofibers, used as a support for the growth of CNT, were deposited on nanopatterned silicon substrate by a hybrid plasma process, combining magnetron sputtering and plasma-enhanced chemical vapor deposition (PECVD). Transmission electron microscopy revealed the presence of spherical nanoparticles randomly dispersed within the carbon nanofibers. The nickel nanoparticles have been used as a catalyst to initiate the growth of CNT by PECVD at 600°C. After the growth of CNT onto the ultra-long CNF, SEM imaging revealed the formation of hierarchical carbon nanostructures which consist of CNF sheathed with CNTs. Furthermore, we demonstrate that reducing the growth temperature of CNT to less than 500°C leads to the formation of carbon nanowalls on the CNF instead of CNT. This simple fabrication method allows an easy preparation of hierarchical carbon nanostructures over a large surface area, as well as a simple manipulation of such material in order to integrate it into nanodevices.

Europe-wide reduction in primary productivity caused by the heat and drought in 2003.

Future climate warming is expected to enhance plant growth in temperate ecosystems and to increase carbon sequestration. But although severe regional heatwaves may become more frequent in a changing climate, their impact on terrestrial carbon cycling is unclear. Here we report measurements of ecosystem carbon dioxide fluxes, remotely sensed radiation absorbed by plants, and country-level crop yields taken during the European heatwave in 2003. We use a terrestrial biosphere simulation model to assess continental-scale changes in primary productivity during 2003, and their consequences for the net carbon balance. We estimate a 30 per cent reduction in gross primary productivity over Europe, which resulted in a strong anomalous net source of carbon dioxide (0.5 Pg C yr(-1)) to the atmosphere and reversed the effect of four years of net ecosystem carbon sequestration. Our results suggest that productivity reduction in eastern and western Europe can be explained by rainfall deficit and extreme summer heat, respectively. We also find that ecosystem respiration decreased together with gross primary productivity, rather than accelerating with the temperature rise. Model results, corroborated by historical records of crop yields, suggest that such a reduction in Europe's primary productivity is unprecedented during the last century. An increase in future drought events could turn temperate ecosystems into carbon sources, contributing to positive carbon-climate feedbacks already anticipated in the tropics and at high latitudes.

Titanium carbide/carbon composite nanofibers prepared by a plasma process.

The incorporation of metal or metal carbide nanoparticles into carbon nanofibers modifies their properties and enlarges their field of application. The purpose of this work is to report a new non-catalytic and easy method to prepare organized metal carbide-carbon composite nanofibers on nanopatterned silicon substrates prepared by laser interference lithography coupled with deep reactive ion etching. Titanium carbide-carbon composite nanofibers were grown on the top of the silicon lines parallel to the substrate by a hybrid plasma process combining physical vapor deposition and plasma enhanced chemical vapor deposition. The prepared nanofibers were analyzed by scanning electron microscopy, x-ray photoelectron spectroscopy, Raman spectroscopy and transmission electron microscopy. We demonstrate that the shape, microstructure and the chemical composition of the as-grown nanofibers can be tuned by changing the plasma conditions.

Anatase TiO2 deposited at low temperature by pulsing an electron cyclotron wave resonance plasma source.

Photocatalytic surfaces have the potentiality to respond to many of nowadays societal concerns such as clean H2 generation, CO2 conversion, organic pollutant removal or virus inactivation. Despite its numerous superior properties, the wide development of TiO2 photocatalytic surfaces suffers from important drawbacks. Hence, the high temperature usually required (> 450 °C) for the synthesis of anatase TiO2 is still a challenge to outreach. In this article, we report the development and optimisation of an ECWR-PECVD process enabling the deposition of anatase TiO2 thin films at low substrate temperature. Scanning of experimental parameters such as RF power and deposition time was achieved in order to maximise photocatalytic activity. The careful selection of the deposition parameters (RF power, deposition time and plasma gas composition) enabled the synthesis of coatings exhibiting photocatalytic activity comparable to industrial references such as P25 Degussa and Pilkington Activ at a substrate temperature below 200 °C. In addition, to further decrease the substrate temperature, the interest of pulsing the plasma RF source was investigated. Using a duty cycle of 50%, it is thus possible to synthesise photocatalytic anatase TiO2 thin films at a substrate temperature below 115 °C with a deposition rate around 10 nm/min.

Single- and few-walled carbon nanotubes grown at temperatures as low as 450 degrees c: electrical and field emission characterization.

Single-wall (SW-) and few-walled (FW-) carbon nanotubes (CNTs) were synthesized on aluminum/ cobalt coated silicon at temperatures as low as 450 degrees C by plasma enhanced chemical vapor deposition technique (PECVD). The SWCNTs and FWCNTs grow vertically oriented and well separated from each other. The cold field emission studies of as-grown SWCNTs and FWCNTs showed low turn-on field emission threshold voltages, strongly dependent of the nanotubes morphology. Current-voltage curves of individual CNTs, measured by conductive atomic force microscopy (CAFM), showed an electrical resistance of about 90 Komega, that is attributed mainly to the resistance of the contact between the CNTs and the conductive CAFM tip (Au and Pt).

MRI evaluation of bulky tumor masses in the mesentery and bladder involvement in peritoneal carcinomatosis.

AIM: Peritonectomy procedures with intraperitoneal chemohyperthermia are an effective but costly treatment for peritoneal carcinomatosis (PC). Consequently a proper selection of patients is necessary. We evaluated the benefit of MRI prior to surgery, in the detection of two of the main surgery contraindications: bulky mesenteric tumors and bladder implants. METHODS: Three experts retrospectively reviewed abdominal and pelvic MRI from 19 cases of surgically proved PC (ovary: 7; colorectal: 7; gastric: 2; pseudomyxoma peritonei: 2; appendix: 1). RESULTS: Mesenteric tumors were always identified as hypersignal masses on axial and coronal fat suppression gadolinium-enhanced T1 images (n=3). Three out of five bladder implants were detected. The two cases of bladder implants that were not detected on MRI were missed because the bladder was not filled. The best sequence for the detection of bladder involvement was axial T2-weighted images with bladder filling. CONCLUSIONS: Evaluating the preoperative resectability of PC is crucial for patient management. MRI seems to reliably detect bulky mesenteric tumors and bladder implants on condition the bladder is filled and appropriate sequences are used.

Effect of calcium on e-cadherin expression in breast-tumor cells.

E-cadherins are homophilic adhesion molecules the expression of which is tightly linked to the invasiveness and the differentiated state of the cells. E-cadherin expression seems also inversely related to the expression of vimentin, an intermediate filament implicated in the metastatic potential of some cells. In breast tumor cells MCF-7, we have previously shown that calcium influences cell growth and promotes cell differentiation. In view of the importance of cell adhesion mechanisms in cell growth and invasion, we sought to determine whether calcium affects the regulation of E-cadherin expression and modifies the relationship between E-cadherin and vimentin expression. To address this question, cells were grown at low (0.04 mM) or high (2.5 mM) concentration of calcium and cadherin and vimentin expression was assessed by flow cytometry analyses. Our results show that calcium enhances cadherin expression in cadherin positive cells and decreases vimentin expression in these cells; in cadherin negative cells, calcium only decreases the expression of vimentin. The modifications of E-cadherin and/or vimentin expression suggests that drugs that can modify intracellular calcium may contribute to overcoming the progression of breast tumor cells toward increasingly malignant phenotypes.

Transferrin receptors in cultured breast cancer cells.

Transferrin receptors were demonstrated on the cell membrane of breast cancer epithelial cells in primary or long-term culture. Diferric transferrin binding was saturable, specific and was not related to DNA content or clinical and histological features of the tumour. However a good correlation (p less than 0.01) was found between transferrin binding and thymidine incorporation. These results suggest the possibility of transferrin receptor measurement as a reflection of the proliferative activity of cultured breast tumour cells.

Mechanisms of xylem recovery from winter embolism in Fagus sylvatica.

Hydraulic conductivity in the terminal branches of mature beech trees (Fagus sylvatica L.) decreased progressively during winter and recovered in the spring. The objective of this study was to determine the mechanisms involved in recovery. Two periods of recovery were identified. The first recovery of hydraulic conductivity occurred early in the spring, before bud break, and was correlated with the occurrence of positive xylem pressure at the base of the tree trunk. Active refilling of the embolized vessels caused the recovery. The second recovery of hydraulic conductivity occurred after bud break and was correlated with the onset of cambial activity. Formation of new functional vessels, leading to an increase in xylem diameter, was largely responsible for the increase in xylem conductivity. The two mechanisms were complementary: active refilling of embolized vessels occurred mostly in the root and the trunk, whereas formation of new functional vessels occurred mainly in young terminal shoots.

Seasonal dynamics of soil carbon dioxide efflux and simulated rhizosphere respiration in a beech forest.

Respiration of the rhizosphere in a beech (Fagus sylvatica L.) forest was calculated by subtracting microbial respiration associated with organic matter decomposition from daily mean soil CO2 efflux. We used a semi-mechanistic soil organic matter model to simulate microbial respiration, which was validated against "no roots" data from trenched subplots. Rhizosphere respiration exhibited pronounced seasonal variation from 0.2 g C m(-2) day(-1) in January to 2.3 g C m(-2) day(-1) in July. Rhizosphere respiration accounted for 30 to 60% of total soil CO2 efflux, with an annual mean of 52%. The high Q10 (3.9) for in situ rhizosphere respiration was ascribed to the confounding effects of temperature and changes in root biomass and root and shoot activities. When data were normalized to the same soil temperature based on a physiologically relevant Q10 value of 2.2, the lowest values of temperature-normalized rhizosphere respiration were observed from January to March, whereas the highest value was observed in early July when fine root growth is thought to be maximal.

Lymphocytes T and pharmacokinetics after a single oral dose of levamisole in healthy and cancer subjects.

Levamisole, an anthelmintic drug with immunopotentiating activity, is shown to have variable effects on cell-mediated immunity. We have studied the effect of a single oral dose (2.5 mg/kg or 5 mg/kg) on early and spontaneous E rosettes percentages in healthy and cancer patients. Pharmacokinetic study of this compound was conducted in parallel. The results indicated that single administration of levamisole (2.5 mg/kg) in healthy men can promote an increase of early E rosettes with mean peak plasma level of 0.8 micrograms. ml-1. On the other hand, there was no change in the proportion of early E rosettes in cancer patients and in the proportion of spontaneous E rosettes in healthy and cancer subjects.

Integration of a carbon nanotube based electrode in silicon microtechnology to fabricate electrochemical transducers.

An original approach was developed and validated for the fabrication of a carbon nanotube (CNT) electrode synthesized directly onto a carbon buffer thin film deposited on a highly doped monocrystalline silicon surface. The buffer layer of amorphous carbon thin film was deposited by physical vapour deposition on the silicon substrate before CNT synthesis. For this purpose, nickel was deposited on the carbon buffer layer by an electrochemical procedure and used as a catalyst for the CNT growth. The CNT synthesis was achieved by plasma enhanced chemical vapour deposition (PECVD) in an electron cyclotron resonance (ECR) plasma chamber using a C(2)H(2)/NH(3) gas mixture. In order to evaluate the electrochemical behaviour of the CNT-based electrode, the carbon layer and the silicon/carbon interface were studied. The resulting buffer layer enhanced the electronic transport from the doped silicon to the CNTs. The electrode surface was studied by XPS and characterized by both SEM and TEM. The electrochemical response exhibited by the resulting electrodes modified with CNTs was also examined by cyclic voltammetry. The whole process was found to be compatible with silicon microtechnology and could be envisaged for the direct integration of microsensors on silicon chips.

Plasticity in hydraulic architecture of Scots pine across Eurasia.

Widespread tree species must show physiological and structural plasticity to deal with contrasting water balance conditions. To investigate these plasticity mechanisms, a meta-analysis of Pinus sylvestris L. sap flow and its response to environmental variables was conducted using datasets from across its whole geographical range. For each site, a Jarvis-type, multiplicative model was used to fit the relationship between sap flow and photosynthetically active radiation, vapour pressure deficit (D) and soil moisture deficit (SMD); and a logarithmic function was used to characterize the response of stomatal conductance (G(s)) to D. The fitted parameters of those models were regressed against climatic variables to study the acclimation of Scots pine to dry/warm conditions. The absolute value of sap flow and its sensitivity to D and SMD increased with the average summer evaporative demand. However, relative sensitivity of G(s) to D (m/G (s,ref), where m is the slope and G(s,ref) is reference G(s) at D = 1 kPa) did not increase with evaporative demand across populations, and transpiration per unit leaf area at a given D increased accordingly in drier/warmer climates. This physiological plasticity was linked to the previously reported climate- and size-related structural acclimation of leaf to sapwood area ratios. G (s,ref), and its absolute sensitivity to D(m), tended to decrease with age/height of the trees as previously reported for other pine species. It is unclear why Scots pines have higher transpiration rates at drier/warmer sites, at the expense of lower water-use efficiency. In any case, our results suggest that these structural adjustments may not be enough to prevent lower xylem tensions at the driest sites.