RESUMO
A Mg-cell with P2-Na2/3 Ni1/3 Mn2/3 O2 layered oxide cathode provides novel reaction mechanism not observed in Na-cells. The sodium/vacancy ordering and Jahn-Teller effects are suppressed with the insertion of magnesium ion. The Mg-cell exhibits different features when operating between 4.5 and 0.15 V and 3.9 and 0.15 V versus Mg2+ /Mg. To analyze the structural and chemical changes during Mg insertion, the cathode is first charged to obtain the Na1/3 Ni1/3 Mn2/3 O2 compound, which is formally accompanied by an oxidation from Ni2+ to Ni3+ . As structure models Mg1/6 Na1/3 Ni1/3 Mn2/3 O2 and Mg1/12 Na1/2 Ni1/3 Mn2/3 O2 are utilized with a large 2 3 a $2\sqrt 3 a$ × 2 3 a $2\sqrt 3 a$ supercell. On discharge, the Mg-cell exhibits a multistep profile which reaches ≈100 mA h g-1 with the valence change from Ni3+ to Ni2+ . Such profile is quite different from its sodium counterpart (230 mA h g-1 ) which exhibits the sodium/vacancy ordering and deleterious presence of Mn3+ . Depending on how the two interlayer spacings are filled by Na and Mg the "staged," "intermediated," and "average" models are analyzed for Mgy Na8 Ni8 Mn16 O48 supercell. This fact suggests differences in the cell performance when Mg is used as counter electrode providing some tips to improve the structure engineering on cathode materials.
RESUMO
Lithium metal is a highly promising anode for next-generation high-energy-density rechargeable batteries. Nevertheless, its practical application faces challenges due to the uncontrolled lithium dendrites growth and infinite volumetric expansion during repetitive cycling. Herein, a composite lithium anode is designed by mechanically rolling and pressing a cerium oxide-coated carbon textile with lithium foil (Li@CeO2/CT). The in situ generated cerium dioxide (CeO2) and cerium trioxide (Ce2O3) form a heterojunction with a reduced lithium-ion migration barrier, facilitating the rapid lithium ions migration. Additionally, both CeO2 and Ce2O3 exhibit higher adsorbed energy with lithium, enabling faster and more distributed interfacial transport of lithium ions. Furthermore, the high specific surface area of 3D skeleton can effectively reduce local current density, and alleviate the lithium volumetric changes upon plating/stripping. Benefiting from this unique structure, the highly compact and uniform lithium deposition is constructed, allowing the Li@CeO2/CT symmetric cells to maintain a stable cycling for over 500 cycles at an exceptional high current density of 100 mA cm-2. When paired with LiNi0.91Co0.06Mn0.03O2 (NCM91) cathode, the cell achieves 74.3% capacity retention after 800 cycles at 1 C, and a remarkable capacity retention of 81.1% after 500 cycles even at a high rate of 4 C.
RESUMO
Magnesium driven reaction in olivine-type MgMn0.5 Zn0.5 SiO4 structure is subject of study by experimental tests and density functional theory (DFT) calculations. The partial replacement of Mn in Oh sites by other divalent metal such as Zn to get MgMn0.5 Zn0.5 SiO4 cathode is successfully developed by a simple sol-gel method. Its comparison with the well-known MgMnSiO4 olivine-type structure with (Mg)M1 (Mn)M2 SiO4 cations distribution serves as the basis of this study to understand the structure, and the magnesium extraction/insertion properties of novel olivine-type (Mg)M1 (Mn0.5 Zn0.5 )M2 SiO4 composition. This work foresees to extend the study to others divalent elements in olivine-type (Mg)M1 (Mn0.5 M0.5 )M2 SiO4 structure with M = Fe, Ca, Mg, and Ni by DFT calculations. The obtained results indicate that the energy density can be attuned between 520 and 440 W h kg-1 based on two properties of atomic weight and redox chemistry. The presented results commit to open new paths toward development of cathodes materials for Mg batteries.
RESUMO
Sodium and magnesium batteries with intercalation electrodes are currently alternatives of great interest to lithium in stationary applications, such as distribution networks or renewable energies. Hydrated laminar oxides such as birnessites are an attractive cathode material for these batteries. Sodium and potassium birnessite samples have been synthesized by thermal and hydrothermal oxidation methods. Hybrid electrochemical cells have been built using potassium birnessite in aqueous sodium electrolyte, when starting in discharge and with a capacity slightly higher than 70 mA h g-1. Hydrothermal synthesis generally shows slightly poorer electrochemical behavior than their thermal counterparts in both sodium and potassium batteries. The study on hybrid electrolytes has resulted in the successful galvanostatic cycling of both sodium birnessite and potassium birnessite in aqueous magnesium electrolyte, with maximum capacities of 85 and 50 mA h g-1, respectively.
Assuntos
Fontes de Energia Elétrica , Magnésio/química , Óxidos/química , Potássio/química , Sódio/químicaRESUMO
Off-stoichiometric Na3+3x V2-x (PO4 )3 samples have been prepared by a sol-gel route. X-ray diffraction and XPS revealed the flexibility of the NASICON framework to accommodate these deviations of the stoichiometry; at least for low x values. X-ray photoelectron spectra evidenced the presence of Na4 P2 O7 impurities. The synergic combination of the structural deviations and the presence of Na4 P2 O7 impurities induce a significant improvement of the electrochemical performance and cycling stability at high rates, as compared to the stoichiometric Na3 V2 (PO4 )3 sample. The fast kinetic response provided by the induced off-stoichiometry involves a decrease of the cell resistance.
RESUMO
A slight deviation of the stoichiometry has been introduced in Na3-3xV2+x(PO4)3 (0 ≤ x ≤ 0.1) samples to determine the effect on the structural and electrochemical behavior as a positive electrode in sodium-ion batteries. X-ray diffraction and XPS results provide evidence for the flexibility of the NASICON framework to allow a limited vanadium superstoichiometry. In particular, the Na2.94V2.02(PO4)3 formula reveals the best electrochemical performance at the highest rate (40C) and capacity retention upon long cycling. It is attributed to the excellent kinetic response and interphase chemical stability upon cycling. The electrochemical performance of this vanadium superstoichiometric sample in a full sodium-ion cell is also described.
RESUMO
A novel design of a sodium-ion cell is proposed based on the use of nanocrystalline thin films composed of transition metal oxides. X-ray diffraction, Raman spectroscopy and electron microscopy were helpful techniques to unveil the microstructural properties of the pristine nanostructured electrodes. Thus, Raman spectroscopy revealed the presence of amorphous NiO, α-Fe2 O3 (hematite) and γ-Fe2 O3 (maghemite). Also, this technique allowed the calculation of an average particle size of 23.4 Å in the amorphous carbon phase in situ generated on the positive electrode. The full sodium-ion cell performed with a reversible capacity of 100 mA h g(-1) at C/2 with an output voltage of about 1.8 V, corresponding to a specific energy density of about 180 W h kg(-1) . These promising electrochemical performances allow these transition metal thin films obtained by electrochemical deposition to be envisaged as serious competitors for future negative electrodes in sodium-ion batteries.
RESUMO
An anatase nanotube array has been prepared with a special morphology: two concentric walls and a very small central cavity. The method used here to achieve the double-wall structure is a single-step anodization process under a voltage ramp. Thanks to this nanostructure, which is equivalent to a fractal electrode, the electrochemical behaviour is improved, and the specific capacity is higher in both lithium and sodium cells due to pseudocapacitance. The double-wall structure of the nanotube enhances the surface of TiO2 being in contact with the electrolyte solution, thus allowing an easy penetration of the alkali ions into the electrode active material. The occurrence of sodium titanate in the electrode material after electrochemical reaction with sodium is studied by using EPR, HRTEM and NMR experiments.
RESUMO
Solid electrolytes are crucial in the development of advanced lithium batteries and related technologies. Orthorhombic Li2NaPO4 (nalipoite) was synthesized, and its ionic conductivity compared very favorably with that of Li3PO4. The potential applicability of Li(3-x)Na(x)PO4 as a lithium ion solid electrolyte was investigated for first time. First-principles DFT calculations were used to evaluate the possibilities of preparing other crystal structures.
RESUMO
PURPOSE: The superior horizontal pancreatic artery was described in 1910, and after a few years, it was forgot by most investigators. This research is aimed to revive the description of this artery, describing course, pattern of branching and frequency. METHODS: More than 1,000 of angiographies including studies of the superior mesenteric artery, celiac trunk and its branches, were selected from the angiographic archives of the ex-institutes of Radiology of Siena, Rome (University of Sacro Cuore) and Perugia, and the arterial anatomy of the pancreas was studied. RESULTS: A pancreatic branch of the splenic artery running along the superior border of the pancreatic body and tail was observed in 25.93% of cases. This branch matched the description of the superior horizontal pancreatic artery and, when existing, replaced the pancreatica magna artery. For this reason, we considered the superior horizontal pancreatic artery as a variant of the pancreatica magna artery. Variable in caliber and importance, in most cases the superior horizontal pancreatic artery gave off descending branches that anastomosed with the inferior pancreatic artery. CONCLUSIONS: A superior horizontal pancreatic artery could be visualized more easily by selective angiography of the splenic artery. When coupled with the inferior pancreatic artery, the presence of the superior horizontal pancreatic artery outlined a longitudinally arranged pattern of blood supply of the distal pancreas that should be known. In particular circumstances, extended resections of the gland cutting both longitudinal arteries might jeopardize the surviving of the pancreas remnant.
Assuntos
Pâncreas/irrigação sanguínea , Pâncreas/diagnóstico por imagem , Angiografia/métodos , Artérias/anormalidades , Artéria Celíaca/diagnóstico por imagem , Artéria Hepática/diagnóstico por imagem , Humanos , Artéria Mesentérica Superior/diagnóstico por imagem , Pâncreas/anormalidades , Artéria Esplênica/diagnóstico por imagemRESUMO
Na3V2(PO4)2F3 (NVPF), a typical sodium superionic conductor (NASICON) type structure, has attracted much interest as a potential positive electrode in sodium-ion battery. However, the inherently poor electronic conductivity of phosphates compromises the electrochemical properties of this material. Here, we develop a general strategy to improve the electrochemical performance by preparing a new composite material "polyaniline (PANI)@NVPF" using a Pickering emulsion method. The X-ray diffraction and Raman results indicated a successful PANI coating without affecting the NASICON-type structure of NVPF, and they enhanced the interfacial bonding between the two components. Also, thermogravimetric analysis and scanning electron microscopy analyses revealed that the PANI content influenced the thermal stability and morphology of the nanocomposites. As a result, the sodium test cells exhibited multielectron reactions and a better rate performance for PANI@NVPF nanocomposites as compared to NVPF. Specifically, 2%PANI@NVPF maintained 70% of its initial capacity at 5C. Ex-situ electron paramagnetic resonance revealed the existence of mixed valence states of vanadium (V4+/V3+) in both discharge and charge processes. Consequently, the successful PANI coating into the sodium superionic conductor framework improved the sodium diffusion channels with a measurable increase of diffusion coefficients with cycling (ca. 3.25 × 10-11 cm2 s-1). Therefore, PANI@NVPF nanocomposites are promising cathode candidates for high-rate sodium-ion battery applications.
RESUMO
The fabrication of low-cost carbon materials and high-performance sodium- and magnesium-ion batteries comprising hierarchical porous electrodes and superior electrolytes is necessary for complementing Li-ion energy storage. In this work, nongraphitic high-surface porous carbons (NGHSPCs) exhibited an unprecedented formation of n-stages (stage-1 and stage-2) due to the co-intercalation of sodium (Na(dgm)2C20) with diglyme. X-ray diffraction patterns, Patterson diagram, Raman spectra, and IR spectra suggested the presence of n-stages. This phenomenon implies an increase of the initial capacity (â¼200 mAh g-1) and good Na-ion diffusion (2.97 × 10-13 cm2 s-1), employing diglyme as compared to standard electrolytes containing propylene carbonate and fluoroethylene carbonate. Additionally, the current approach is scalable to full Na- and Mg-ion cells by using t-Na5V(PO4)2F2 and MgMnSiO4 cathodes, respectively, reaching 250 and 110 W h kg-1 based on the anode mass. The simultaneous Mg (de)insertion from/into MgMnSiO4 and the adsorption/desorption of bistriflimide ions on the NGHSPC surface is responsible for capacity enhancement.
RESUMO
AIMS: To develop a new protocol for the assessment of action observation (AO) abilities and imitation of meaningful and non-meaningful gestures, to examine its psychometric properties in children with DCD and typically developing (TD) children. BACKGROUND: For learning manual skills, AO and imitation are considered fundamental abilities. Knowledge about these modalities in children with DCD is scarce and an assessment protocol is lacking. METHOD: The protocol consists of 2 tests. The AO test consists of two assembly tasks. The imitation test includes 12 meaningful and 20 non-meaningful gestures. Items of both tests are rated on a 4-point scale. Twelve children with DCD (mean age 8y3m, SD, 1.30) and 11 TD children (mean age 8y2m, SD 1.52) were enrolled. For inter-rater reliability, intraclass correlation coefficients (ICC) were calculated for the total score, weighted kappa and percentage agreement for single items. Known group validity was assessed by comparison of DCD and TD group (Wilcoxon rank sum test). For construct validity, the mABC-2 test was used. The protocol was adapted and confirmed by an intra and inter-rater reliability study (new sample of 11 DCD children, mean age 7y5m, SD 1.37). RESULTS: Excellent ICCs were reported for intra and inter-rater reliability for the final protocol. A significant difference between DCD and TD group was found for AO abilities (p < .01), for nonmeaningful gestures (p < .001). A significant correlation was reported between the AO test and the mABC-2 test (r = 56;p ≤0.0001). No significant correlations were revealed for the imitation tests. DISCUSSION AND CONCLUSION: The results support the psychometric properties of this protocol. When fully validated, it may contribute to map the deficits in AO abilities and imitation, to evaluate treatment effects of imitation and AO interventions.
Assuntos
Gestos , Comportamento Imitativo , Transtornos das Habilidades Motoras/diagnóstico , Psicometria/métodos , Criança , Estudos de Viabilidade , Feminino , Humanos , Masculino , Reprodutibilidade dos TestesRESUMO
Layered transition metal oxides are the most important cathode materials for Li/Na/K ion batteries. Suppressing undesirable phase transformations during charge-discharge processes is a critical and fundamental challenge towards the rational design of high-performance layered oxide cathodes. Here we report a shale-like NaxMnO2 (S-NMO) electrode that is derived from a simple but effective water-mediated strategy. This strategy expands the Na+ layer spacings of P2-type Na0.67MnO2 and transforms the particles into accordion-like morphology. Therefore, the S-NMO electrode exhibits improved Na+ mobility and near-zero-strain property during charge-discharge processes, which leads to outstanding rate capability (100 mAh g-1 at the operation time of 6 min) and cycling stability (>3000 cycles). In addition, the water-mediated strategy is feasible to other layered sodium oxides and the obtained S-NMO electrode has an excellent tolerance to humidity. This work demonstrates that engineering the spacings of alkali-metal layer is an effective strategy to stabilize the structure of layered transition metal oxides.
RESUMO
This paper reviews some catalytic wet air oxidation (CWAO) investigations of industrial wastewaters over platinum and ruthenium catalysts supported on TiO2 and ZrO2 formulated to be active and resistant to leaching, with particular focus on the stability of the catalyst. Catalyst recycling experiments were performed in batch reactors and long-term stability tests were conducted in trickle-bed reactors. The catalyst did not leach upon treatment of Kraft bleaching plant and olive oil mill effluents, and could be either recycled or used for long periods of time in continuous reactors. Conversely, these catalysts were rapidly leached when used to treat effluents from the production of polymeric membranes containing N,N-dimethylformamide. The intermediate formation of amines, such as dimethylamine and methylamine with a high complexing capacity for the metal, was shown to be responsible for the metal leaching. These heterogeneous catalysts also deactivated upon CWAO of sewage sludges due to the adsorption of the solid organic matter. Pre-sonication of the sludge to disintegrate the flocs and improve solubility was inefficient.
Assuntos
Ar , Resíduos Industriais , Metais/química , Esgotos , Poluentes da Água/química , Catálise , OxirreduçãoRESUMO
Air-stability is one of the most important considerations for the practical application of electrode materials in energy-harvesting/storage devices, ranging from solar cells to rechargeable batteries. The promising P2-layered sodium transition metal oxides (P2-NaxTmO2) often suffer from structural/chemical transformations when contacted with moist air. However, these elaborate transitions and the evaluation rules towards air-stable P2-NaxTmO2 have not yet been clearly elucidated. Herein, taking P2-Na0.67MnO2 and P2-Na0.67Ni0.33Mn0.67O2 as key examples, we unveil the comprehensive structural/chemical degradation mechanisms of P2-NaxTmO2 in different ambient atmospheres by using various microscopic/spectroscopic characterizations and first-principle calculations. The extent of bulk structural/chemical transformation of P2-NaxTmO2 is determined by the amount of extracted Na+, which is mainly compensated by Na+/H+ exchange. By expanding our study to a series of Mn-based oxides, we reveal that the air-stability of P2-NaxTmO2 is highly related to their oxidation features in the first charge process and further propose a practical evaluating rule associated with redox couples for air-stable NaxTmO2 cathodes.
RESUMO
Magnesium batteries are a promising technology for a new generation of energy storage for portable devices. Attention should be paid to electrolyte and electrode material development in order to develop rechargeable Mg batteries. In this study, we report the use of the spinel lithium titanate or Li4Ti5O12 (LTO) as an active electrode for Mg2+-ion batteries. The theoretical capacity of LTO is 175 mA h g-1, which is equivalent to an insertion reaction with 1.5 Mg2+ ions. The ability to enhance the specific capacity of LTO is of practical importance. We have observed that it is possible to increase the capacity up to 290 mA h g-1 in first discharge, which corresponds to the reaction with 2.5 Mg2+ ions. The addition of MgCl2·6H2O to the electrolyte solutions significantly improves their electrochemical performance and enables reversible Mg deposition. Ex-situ X-ray diffraction (XRD) patterns reveal little structural changes, while X-ray photoelectron spectrometer (XPS) (XPS) measurements suggest Mg reacts with LTO. The Ti3+/Ti4+ ratio increases with the amount of inserted magnesium. The impedance spectra show the presence of a semicircle at medium-low frequencies, ascribable to Mg2+ ion diffusion between the surface film and LTO. Further experimental improvements with exhaustive control of electrodes and electrolytes are necessary to develop the Mg battery with practical application.
RESUMO
The recent introduction of glyme-based solvents has opened new opportunities to characterize graphitic materials as anodes for sodium-ion batteries. We evaluated the electrochemical behaviour of a graphitized carbon nanofiber for the first time. X-ray diffraction, electron paramagnetic resonance and nuclear magnetic resonance allowed the sodium insertion mechanism to be untangled, in which the occurrence of an activation process during the first discharge enhances sodium accessibility to active redox centres at the interlayer space. Morphological changes observed by electron microscopy could be responsible for this behaviour. A fully graphitized carbon nanofibers/NaPF6(diglyme)/Na3V2(PO4)3 sodium-ion battery was tested to probe the reliability of this graphitic nanostructure as a negative electrode.
RESUMO
This study reports on the electrochemical alloying-dealloying properties of Mg2Sn intermetallic compounds. 119Sn Mössbauer spectra of β-Sn powder, thermally alloyed cubic-Mg2Sn, and an intermediate MgSn nominal composition are used as references. The discharge of a Mg/micro-Sn half-cell led to significant changes in the spectra line shape, which is explained by a multiphase mechanism involving the coexistence of c-Mg2Sn, distorted Mg2−δSn, and Mg-doped β-Sn. Capacities and capacity retention were improved by using nanoparticulate tin electrodes. This material reduces significantly the diffusion lengths for magnesium and contains surface SnO and SnO2, which are partially electroactive. The half-cell potentials were suitable to be combined versus the MgMn2O4 cathodes. Energy density and cycling properties of the resulting full Mg-ion cells are also scrutinized.
RESUMO
Goat whey is normally discarded in the milk processing industry. However, several studies have addressed its biological properties and possible use in human or animal diet. The present study aimed to analysis the protein profile of goat whey to evaluate its possible oxidant, antioxidant, antibacterial, antitumour, and cytotoxic activities in vitro against human erythrocytes. Goat whey was skimmed, and crude protein extract (CPE) was obtained. Next, protein fractions (F) were obtained using ammonium sulphate precipitation method. The proteins were characterized by SDS-PAGE, two-dimensional electrophoresis and soluble protein measurements. No significant differences were observed in protein profile of CPE, F 30-60% and F 60-90%. The highest protein content was found in F 60-90% (0.41mgP/mL). All samples, except F 0-30% showed bacteriostatic activity against different bacterial strains. Only CPE at a concentration of 1000µg/mL was haemolytic against human erythrocytes. Oxidant activity against erythrocytes was not observed. Antioxidant activity was observed only for CPE. Cytotoxicity against C6 rat glioma cell line that was performed with CPE revealed tumour cell death>70% at concentrations of 0.05 and 0.1µg/mL. These results demonstrate at first time that CPE may be used as an antioxidant, bacteriostatic and cytotoxic compound against tumour cells.