Layer-by-layer nanocoating of lignocellulose fibers for enhanced paper properties.

The systematic modification of the surface charge of lignocellulose fibers was performed with a polyelectrolyte layer-by-layer (LbL) nanocoating process to produce negatively and positively charged fibers. The fibers were coated with 20-50 nm thick polymer surface layers which subsequently increased interaction between the fibers during paper formation. The modified fibers were added to standard fibers at varying proportions to produce paper with corresponding variation in properties such as strength and electrical conductivity. Paper strength was doubled by manipulating the surface charge and coating thickness of the LbL-treated pulp fibers. It is demonstrated that the LbL coating process increased the fiber interactions and that these interactions enhanced the paper properties. This process, when applied to a simulated sample of recycle grade of fibers, produce paper with an increase in tear strength as compared with untreated fiber paper. Nanocoating fibers with polythiophene/polyallylamine multilayers produced marginally conductive pulp and paper. Paper electrical conductivity was proportional to the number of the bilayers deposited.

Viscoelastic properties and antimicrobial activity of cellulose fiber sheets impregnated with Ag nanoparticles.

A silver nanoparticle colloid was prepared by a modified Tollens method using d-glucose as the reduction agent. The obtained nanoparticles were used for the modification of pine, linter and recycled cellulose fibers. Although the silver contents were relatively low (0.05-0.13 wt.%), the cellulose-sheets prepared from the modified fibers show improved mechanical and viscoelastic properties. The tensile index (strength) increased with up to 30% in comparison to the index of the sheets obtained from the untreated fibers. The influence of the nanoparticles on the viscoelastic properties of the cellulose sheets was investigated by dynamic mechanical analysis (DMA) in the temperature range from -120 to 20 °C and with a force frequency of 100 Hz. A broad relaxation transition positioned at -80 °C was observed in the loss modulus spectrum of all the cellulose sheets, while the Ag-modified sheets exhibited higher storage moduli values in the whole temperature range. The antimicrobial activity tests show that the pine, silver and recycled cellulose fiber sheets with silver nanoparticles can be successfully employed to prevent the viability and growth of the common pathogens Staphylococcus aureus, Escherichia coli and Candida albicans.