Bio-Based Copolyester PEIFT: Enhanced Hydrophilicity, Rigidity, and Applications in Nanofibers.

The raw materials of Poly(ethylene terephthalate) (PET) are derived from petroleum-based resources, which are no sustainable. Therefore, previous researchers introduced biomass-derived 2,5-tetrahydrofurfuryl dimethanol (THFDM) into PET. However, its heat resistance has decreased compared to PET. In this paper, a novel bio-based copolyester, poly(ethylene glycol-co-2,5-tetrahydrofuran dimethanol-co-isosorbide terephthalate) (PEIFT), is prepared by introducing biomass-derived isosorbide (ISB) and THFDM into the PET chains through melting copolymerization process. With the introduction of ISB content, copolyesters' hydrophilicity and rigidity improve. Compared to PET, glass transition temperature (Tg) increases by over 5 °C. In addition, the toughness and spinning performance of PEIFT have also been improved as a result of the addition of THFDM components. The hydrophobicity of PEIFTs electrospinning is greatly improved, with a contact angle exceeding 135°. Finally, due to the good hydrophobicity of PEIFTs nanofibers, they have potential application value in the manufacture of hydrophobic nanofiber and filter films. Given its biomass source and excellent performance, they make it easier to replace materials derived from petroleum.

A New Self-Healing Degradable Copolymer Based on Polylactide and Poly(p-dioxanone).

In this paper, the copolymerization of poly (p-dioxanone) (PPDO) and polylactide (PLA) was carried out via a Diels-Alder reaction to obtain a new biodegradable copolymer with self-healing abilities. By altering the molecular weights of PPDO and PLA precursors, a series of copolymers (DA2300, DA3200, DA4700 and DA5500) with various chain segment lengths were created. After verifying the structure and molecular weight by 1H NMR, FT-IR and GPC, the crystallization behavior, self-healing properties and degradation properties of the copolymers were evaluated by DSC, POM, XRD, rheological measurements and enzymatic degradation. The results show that copolymerization based on the DA reaction effectively avoids the phase separation of PPDO and PLA. Among the products, DA4700 showed a better crystallization performance than PLA, and the half-crystallization time was 2.8 min. Compared to PPDO, the heat resistance of the DA copolymers was improved and the Tm increased from 93 °C to 103 °C. Significantly, the rheological data also confirmed that the copolymer was self-healing and showed obvious self-repairing properties after simple tempering. In addition, an enzyme degradation experiment showed that the DA copolymer can be degraded by a certain amount, with the degradation rate lying between those of PPDO and PLA.

Preparation of Antibacterial Gelatin/Genipin Nanofibrous Membrane for Tympanic Membrane Repair.

Tympanic membrane perforation (TMP), a common disease, often needs a scaffold as the patch to support surgery. Due to the environment of auditory meatus, the patch can be infected by bacteria that results in failure; therefore, the ideal scaffold may combine biomimetic and antibacterial features. In this work, gelatin was used as the electrospinning framework, genipin as the crosslinking agent, and levofloxacin as an antibacterial in order to prepare the scaffold for TMP. Different contents of levofloxacin have been added to gelatin/genipin. It was found that, with the addition of levofloxacin, the gelatin/genipin membranes exhibit improved hydrophilia and enhanced tensile strength. The antibacterial and cell-cultured experiments showed that the prepared antibacterial membranes had excellent antibacterial properties and good biocompatibility, respectively. In summary, levofloxacin is a good group for the gelatin/genipin scaffold because it improves the physical properties and antibacterial action. Compared with different amounts of levofloxacin, a gelatin/genipin membrane with 1% levofloxacin is more suitable for a TM.

Synthesis, Self-assembly, and Fluorescence Application of Bottlebrush Polyfluorene-g-Polycaprolactone with Conjugated Backbone and Crystalline Brushes.

A series of bottlebrush copolymers with conjugated backbone and crystalline branch chains, polyfluorene-g-polycaprolactone (PF-g-PCL), are synthesized by combining Suzuki cross-coupling polymerization and cationic ring-opening polymerization. The PF-g-PCLs are prepared to self-assembled in solution and thin film. Due to the J-type aggregation of the polyfluorene main chains, the self-assembly spherical micelles have been observed. Meanwhile, in film, they exhibited self-assembly ringed spherulites because of the PF microregions in the bottlebrush copolymer. As a result of the interruption of PCL side chains, the aggregation tendency of PF main chains is weakened. And both the polymer solution and solid can overcome the aggregation-caused quenching to provide more pronounced fluorescence. Especially, owing to the good processability of the PF-g-PCL, as a fluorescent ink for different substrates, they can easily be prepared as high-brightness fluorescent films that are invisible under ambient light.

Synthesis of a Thermal-Responsive Dual-Modal Supramolecular Probe for Magnetic Resonance Imaging and Fluorescence Imaging.

Dual-modal imaging can integrate the advantages of different imaging technologies, which could improve the accuracy and efficiency of clinical diagnosis. Herein, a novel amphiphilic thermal-responsive copolymer obtained from three types of monomers, N-isopropyl acrylamide, 2-(acetoacetoxy) ethyl methacrylate, and propargyl methacrylate, by RAFT copolymerization, is reported. It can be grafted with ß-cyclodextrin and aggregation-induced emission (AIE) luminogens tetraphenylethylene by click chemistry and Biginelli reaction. The multifunctional supramolecular polymer (P4) can be constructed by host-guest inclusion between the copolymer and the Gd-based contrast agent (CA) modified by adamantane [Ad-(DOTA-Gd)]. And it can form vesicles with a bilayer structure in aqueous which will enhance the AIE and magnetic resonance imaging effects. As fluorescent thermometer, P4 can enter HeLa cells for intracellular fluorescence imaging (FI) and is sensitive to temperature with detection limit value of 1.5 °C. As magnetic resonance CA, P4 exhibits higher relaxation compared to Magnevist, which can prolong the circulation time in vivo. In addition, Gd3+ in the polymer can be quickly released from the body by disassembly that reduced the biological toxicity. This work introduces new synthetic ideas for dual-modal probe, which has great potential for clinical diagnostic applications in bioimaging.

Biodegradable polyester copolymers: synthesis based on the Biginelli reaction, characterization, and evaluation of their application properties.

The Biginelli reaction, a three-component cyclocondensation reaction, is an important member of the multicomponent reaction (MCR) family. In this study, we conducted end-group modifications on a variety of biodegradable polyesters, including poly(1,4-butylene adipate) (PBA), poly(ε-caprolactone) (PCL), polylactic acid (PLA), and poly(p-dioxanone) (PPDO), based on the precursor polyethylene glycol (PEG). By combining two polymers through the Biginelli multi-component reaction, four new biodegradable polyester copolymers, namely DHPM-PBA, DHPM-PCL, DHPM-PLA, and DHPM-PPDO, were formed. These Biginelli reactions demonstrated exceptional completeness, validating the efficiency of the synthesis strategy. Although the introduction of various polyesters lead to different properties, such as crystallinity and cytotoxicity, the newly synthesized 3,4-dihydro-2(H)-pyrimidinone compounds (DHPMs) exhibit enhanced hydrophilicity and can self-assemble in water and N,N-dimethylformamide (DMF) solution to form micelles with a controllable size. Furthermore, DHPM-PPDO promotes cellular growth and has potential applications in wound healing and tissue engineering. In conclusion, this method demonstrates great universality and methodological significance and offers insights into the medical applications of polyethylene glycol.

Fabrication of stable solid fluorescent starch materials based on Hantzsch reaction.

In this paper, a series of fluorescent starches were prepared simply and effectively by Hantzsch multi-component reaction (MRC). These materials showed bright fluorescence emission. Notably, due to the existence of polysaccharide skeleton, starch molecules can effectively inhibit the common aggregation induced quenching effect caused by the aggregation of conjugated molecules in traditional organic fluorescent materials. Meanwhile, the stability of this material is so excellent that the fluorescence emission of the dried starch derivatives would not destroy after boiling at a high temperature in some common solvents, and even brighter fluorescence can be stimulated in alkaline solution. In addition to fluorescence, starch was also endowed with hydrophobic property by one-pot method connecting long alkyl chains. Compared with native starch, the contact angle of fluorescent hydrophobic starch increased from 29° to 134°. Furthermore, the fluorescent starch can be prepared into film, gel and coating by different processing methods. The preparation of these Hantzsch fluorescent starch materials provide a new way for the functional modification of starch materials and has great application potential in detecting, anti-counterfeiting, security printing and other related fields.

A Paper-Based Fluorescent Sensor for Rapid Early Screening of Oral Squamous Cell Carcinoma.

Various types of sensors play an irreplaceable role in the detection of biomarkers, but their high cost and complicated operation make it difficult to benefit ordinary people. Herein, we develop a low-cost, double-layered, paper-based fluorescent sensor (CP/HQ) structurally consisting of the upper reaction layer loaded with two oxidases (lactate oxidase and choline oxidase) and the bottom fluorescent layer that physically associates with the porphine-grafted composite fluorescent polymer colloids (PF-PDMTP/HQ). Based on the dramatic and rapid fluorescence decrease of porphine induced by the oxidation between saliva and oxidases and subsequent fluorescence resonance energy transfer from oxidized hydroquinone, the resultant fluorescent paper sensor enables us to achieve visual detection of OSCC, which was further recognized by smartphone scanning as the grayscale variation. It was found that the linear sensing range of grayscale value are 10-200 µM for lactic acid and 10-100 µM for choline, with LODs of 5.7 and 8.9 µM, respectively. More importantly, the sensor can achieve a powerful detection capability comparable to that of high-performance liquid chromatography (HPLC) in clinical settings with simple operation, demonstrating its great application potential. Our proposed sensor not only improves the accuracy of OSCC diagnosis but also provides a valuable attempt for the device modification of polymer-sensing systems and the development of non-invasive and easy-to-operate disease screening methods.

A facile method of functional derivatization based on starch acetoacetate.

In the present work, we constructed a methodology to graft starch with special groups, such as alkyl, phenolic, naphthalimide derivatives (ND) and polymer, by a simple reaction under generally mild conditions without catalysts or UV irradiation, based on precursor starch acetoacetate (SAA). The completeness of these reactions has been proved to be ideal. After grafting, the starch derivatives have some common changes, for instance, their solubility is improved in certain solvents. On the other hand, the introduction of different functional groups will also bring some characteristics to the derivatives (e.g. ND brings fluorescence). In addition, part of the derivatives shows excellent machinability, and their hot-pressed samples exhibit great transparency and mechanical strength. Specially, the alkyl grafted starch displays excellent toughness, properties of deformation and self-recovery. In conclusion, this method has good universality and methodological significance, and offers insights into the larger-scale industrial application of starch.

New bio-based polyester with excellent spinning performance: poly(tetrahydrofuran dimethanol-co-ethylene terephthalate).

With the excessive consumption of fossil energy, technologies that transform bio-based resources into materials have received more and more attention from researchers in recent decades. In this paper, a series of poly(ethylene 2,5-tetrahydrofuran dimethyl terephthalate; PEFTs) with different components were synthesized from 2,5-tetrahydrofuran dimethanol (THFDM), terephthalic acid (TPA), and ethylene glycol (EG). Their chemical structures and compositions were determined by FTIR, 1H NMR, and 13C NMR. With the increase in THFDM content, the crystallization, T m, and tensile strength of PEFTs gradually decrease because the introduced THFDM breaks the order of molecular chains, while the thermal stability and T g remain stable. PEFTs seem to present a significant shear thinning phenomenon, which was indicated by the rheological test. Electrospinning technology was used to explore the spinnability of PEFT; it was found that PEFTs have better spinning performance than PET. In addition, due to the good hydrophobicity and porosity of PEFT nanofiber films, they have potential application value in the manufacture of hydrophobic nanofiber and filter films.

Comparative studies on the activities of collagenases from Grimontia hollisae and Clostridium hystoliticum in the hydrolysis of synthetic substrates.

The collagenase produced by a gram-negative bacterium Grimontia hollisae strain 1706B (Ghcol) degrades collagen more efficiently than that produced by a gram-positive bacterium Clostridium histolyticum (Chcol), which is currently the most widely used collagenase in industry [Teramura et al. (Cloning of a novel collagenase gene from the gram-negative bacterium Grimotia (Vibrio) hollisae 1706B and its efficient expression in Brevibacillus choshinensis. J Bacteriol 2011;193:3049-3056)]. Here, we compared the Ghcol and Chcol activities using two synthetic substrates. In the hydrolysis of (7-methoxycoumarin-4-yl)acetyl-L-Lys-L-Pro-L-Leu-Gly-L-Leu-[N3-(2, 4-dinitrophenyl)-L-2, 3-diaminopropioyl]-L-Ala-L-Arg-NH2, Ghcol exhibited 350-fold higher activity than Chcol in the absence of CaCl2 and NaCl. The Ghcol activity markedly decreased with increasing concentrations of buffer, CaCl2 or NaCl, while the Chcol activity did not, suggesting that the Ghcol activity was sensitive to solvent components. In the hydrolysis of N-[3-(2-furyl)acryloyl]-L-Leu-Gly-L-Pro-Ala, Ghcol exhibited 16-fold higher activity than Chcol in the absence of CaCl2 and NaCl, and both enzyme activities did not decrease with increasing concentrations of buffer, CaCl2 or NaCl. pH dependences of activity revealed that the ionizable group responsible for acidic pKe may be Glu for Ghcol and Chcol, while that for alkaline pKe may be His for Ghcol and Tyr for Chcol. These striking differences suggest that the catalytic mechanism of Ghcol might be considerably different from that of clostridial collagenases.