[Comparison of dignity determination of mammographic microcalcification with two systems for digital full-field mammography with different detector resolution: a retrospective clinical study]. / Vergleich der Dignitätsbestimmung von mammographischem Mikrokalk mit zwei Systemen zur digitalen Vollfeldmammographie unterschiedlicher Detektorauflösung : Eine retrospektive klinische Studie.

PURPOSE: The aim of this retrospective clinical study was to compare the diagnostic accuracy of the novel 50 µm FFDM (full-field digital mammography) system (DR) with an established 70 µm system (DR) in the differential diagnosis between benign and malignant clusters of microcalcification (n=50) (BI-RADS™ classification 4/5) and to assess the possible incremental value of the 50 µm pixel-pitch on specificity. MATERIAL AND METHODS: From March 2009 to September 2009, 50 patients underwent full-field digital mammography (FFDM) (detector resolution 70 µm) (Novation, Siemens, Erlangen, Germany). As there were suspicious signs of microcalcification classified with BI-RADS™ 4/5 after diagnosis and preoperative wire localization, control images were made with the new FFDM system (detector: resolution 50 µm) (Amulet, Fujifilm, Tokyo, Japan) with the same exposure parameters. The diagnosis was determined after the operation by five radiologists with different experience in digital mammography from randomly distributed mediolateral views (monitor reading) whose results were correlated with the final histology of all lesions. RESULTS: Histopathology revealed 19 benign and 31 malignant lesions in 50 patients after open biopsy. The results of the five readers showed a higher sensitivity of the new FFDM system (80.0%) in the ability to recognize malignant microcalcification in comparison to the established system (74.8%). The specificity (75.8 versus 71.6%) was slightly higher for the new system but these results were not statistically significant (p<0.001). Considering the diagnostic accuracy, the new system (detector: resolution 50 µm) was also slightly superior to the well-known system (detector: resolution 70 µm) (80.1% versus 76.4%). CONCLUSIONS: Our study has shown that the new full-field digital mammography system using the novel detector compared with the already established FFDM system with respect to the assessment of microcalcification is at least equivalent.

[First experiments for the detection of simulated mammographic lesions: digital full field mammography with a new detector with a double plate of pure selenium]. / Erste Untersuchungen zur Detektion simulierter mammographischer Läsionen : Digitale Vollfeldmammographie mit einem Doppelschicht-Selen-Detektor.

PURPOSE: The article describes an experimental phantom study of a system for digital full field mammography with a new digital detector with a double plate of pure selenium. MATERIALS AND METHODS: The experiments were carried out with the new full field digital mammography system Amulet from FujiFilm. This system has a new detector (18×24 cm(2)) on the basis of highly purified amorphous selenium (a-Se) with a pixel size of 50 µm. The x-rays are converted into electric signals in the first plate which are read into the second plate with the help of an optical switch and demonstrated in the form of an image. In this way a better pixel size/volume and signal-to-noise ratio should be achieved. The object of the investigation was the Wisconsin Mammographic Random Phantom, Model 152 A (Technical Performance Mo/Mo, 28 kV, 100 mAs). Five investigators with different experiences in mammography each received three images on a monitor with different random positions of the simulated lesions in the phantom for assessment. The detection rates were compared under the same conditions with the results of two other full field digital mammography systems. RESULTS: The median detection rate for all images and investigators for the new doubled plated a-Se detector with optical switch was 98.7%. For both other systems with a-Si or and a-Se detectors the detection rate was 89.8% or 97.3%, respectively. There were no significant differences in the detection rate of the simulated breast lesions for all three systems considering the interobserver and intraobserver variation. CONCLUSION: The first phantom study for the detection of simulated breast lesions with the new full field digital mammography system Amulet demonstrates equivalent results with the other systems used in the clinical routine. The trend towards superiority of the new system has to be confirmed in further clinical studies.

[Experimental investigations for dose reduction by optimizing the radiation quality for digital mammography with an a-Se detector]. / Experimentelle Untersuchungen zur Dosisreduktion durch Optimierung der Strahlungsqualität bei digitaler Vollfeldmammografie mit einem Detektor auf Selenbasis.

PURPOSE: Reduction of radiation exposure at an adequate image quality by optimizing the radiation quality for a new system of full-field digital mammography using a digital detector (a-Se). MATERIALS AND METHODS: The investigations were performed using a digital mammography system Novation (Siemens, Erlangen). The system was constructed with a bimetal anode (molybdenum and tungsten) and the possibility of changing the filter (molybdenum/rhodium). The test object was the Wisconsin Mammography Random Phantom Model 152 A (Radiation Measurements Inc.) of which images were acquired using the digital technique with the tungsten anode and rhodium filter at different tube voltages (26-35 kV) and tube loads (40-100 mAs) and compared to images in the molybdan/molybdan molybdenum/molybdenum technique. To quantify the image quality, we used the detection rate of the simulated lesions in the phantom. RESULTS: Increasing the tube voltage significantly decreases the average glandular dose when using AEC (Automatic Exposure Control), i. e., constant detector dose. At the same time, the image quality decreases significantly with respect to the detection rate (26 kV, 1 mGy, 95.1 %; 35 kV, 0.7 mGy, 82.7 %). As a good compromise between the necessary diagnostic image quality and the lowest dose exposition, 28 kV and 60 mAs were selected for imaging with the tungsten/rhodium anode/filter combination. A further change to the tube load did not make sense because a decrease of 10 % resulted in a significant decrease in the detection rate while only a 2 % increase in detection rate was achieved for a 65 % increase in radiation exposure. CONCLUSION: The results of this phantom study demonstrate that the routine use of the tungsten anode in combination with a rhodium filter for full-field digital mammography with an a-Se detector in contrast to a molybdan/molybdan molybdenum/molybdenum anode/filter combination results in a reduction of the average glandular dose of up to 30 % without loss of diagnostic image quality.

[Comparing the clinical value of spot view mammography with reduced pixel size to monitor zooming by reporting microcalcifications in digital mammography]. / Vergleich der klinischen Wertigkeit von Zielaufnahmen mit reduzierter Pixelgrösse des Detektors und digitalem Monitorzooming bei der Beurteilung von Mikrokalzifikationen in der digitalen Mammografie.

PURPOSE: Evaluation of the diagnostic value of breast specimen imaging with a digital mammographic system using a detector system with changeable pixel size compared to standard mode imaging in different monitor display modes. MATERIALS AND METHODS: Using the digital mammographic system SenoScan (Fischer Imaging, Denver, USA), 50 diagnostic breast specimens with microcalcifications were visualized in both standard mode (pixel size 54 microm) and high resolution mode (pixel size 27 microm). The resulting radiographs were displayed 1:1 on a monitor. Standard mode images (pixel size 54 microm) were additionally displayed in a 2:1 mode. A total of 5 readers with different mammographic experience analyzed the type of the microcalcifications on the basis of the different display modes. The images were presented randomly. The findings were subsequently compared to the histology. RESULTS: The high resolution mode yielded slightly but not significantly better results than the standard mode on average for all 5 readers. Compared to a sensitivity of 80 % and a specificity of 72 % (PPV = 74 %, NPV = 78 %) in the standard mode, the high resolution mode provided a sensitivity of 86 % and a specificity of 74 % (PPV = 77 %, NPV = 83 %). The standard mode images on a 2:1 monitor display yielded 84 % and 74 % (PPV = 76 %, NPV = 82 %). CONCLUSION: The high resolution mode did not significantly increase the sensitivity and specificity of the microcalcification reading. A similar improvement was achieved by the 2:1 display mode, i. e. digital monitor zooming. For the clinical situation this means that there is no diagnostic advantage from using a high resolution target view with this mammographic system.

Solid phantom material for the dosimetry of iodine-125 seed ophthalmic plaques.

PURPOSE: A tissue-equivalent solid phantom material, RE-1, closely simulating the radiological attenuation and scattering properties of the human eye for the iodine-125 photon spectrum and their Compton-scattered secondary photons, was fabricated on a polyethylene base with CaCO3 and MgO as inorganic additives. METHODS AND MATERIALS: A 24 mm diameter spherical phantom was made from 1.1 mm thick sheets of RE-1, and holes were drilled in which 1 mm3 TLD cubes were placed. RESULTS: The radial dose function g(r), which determines the dose profile on the transverse axis, was measured in a quasi-infinite phantom of RE-1. CONCLUSION: The values obtained deviate only slightly from those for a quasi-infinite phantom made from water-equivalent material.

Dosimetry and physical treatment planning for iodine eye plaque therapy.

The dosimetry of eye plaques loaded with iodine-125 seeds (type 6702) was performed by means of computer calculations and measurements with thermoluminescent dosimeters (TLD). Measurements of the depth dose distribution (2-25.5 mm) along the transverse axis of a single seed were performed in water equivalent phantom material. The transverse axis attenuation and geometry factor F(r) was obtained by applying a least squares fit to the measured data. Based on the resulting radial dose function, a computer program was developed which calculates dose distributions within the eye for arbitrary loading and placement of the eye plaque. The computational results were verified by TLD measurements in an eye phantom.

Autoradiography for iodine-125 seeds.

To study the interior design of model 6702 and 6711 iodine-125 seeds contact autoradiographs were performed using mammography film. Improved resolution was obtained using a pin-hole camera with a hole of 0.1 mm x 0.1 mm. With these techniques, qualitative determination of the relative activity distribution within each seed was possible. The number of the activated resin spheres and the positions of the centers of these spheres can be exactly determined. A model calculation shows, that variations in the arrangement of the activated spheres within a seed have a moderate influence on the dose distribution at source distances below 10 mm. Knowing the exact source configuration may be useful when comparing dose calculations with measured data for model 6702 125I seeds which are currently employed in ophthalmic plaque and implant therapy of other tumors.

Must radiation dose for CT of the maxilla and mandible be higher than that for conventional panoramic radiography?

We evaluated the feasibility of performing preoperative spiral CT of the maxilla and mandible with a radiation dose similar to that used for conventional panoramic radiography. The skin entrance doses of radiation used for spiral CT (collimation, 1 mm; pitch, 2; tube voltage, 80 kV; tube current, 40 mA) and for panoramic radiography (75 kV, 8 mA, 15 seconds) were measured in one patient by using thermoluminescent dosimeter chips. Results were 0.56 +/- 0.06 mGy for CT and 0.59 +/- 0.04 mGy for radiography. Image quality was adequate for preoperative implant planning. Spiral CT of the mandible and maxilla may therefore be feasible with a radiation dose of similar magnitude as that used for conventional panoramic radiography.

Polyethylene-based water-equivalent phantom material for x-ray dosimetry at tube voltages from 10 to 100 kV.

A water-equivalent plastic material RW-1, in the form of thin foils as well as of thicker sheets, has been produced by melting powdered polyethylene together with CaCO3 and MgO. The mixture has been developed in a three-step procedure, starting with provisional mixtures and using data from their measured attenuation curves to determine the final composition. The attenuation curves of RW-1 and of water, as well as their backscatter factors, are in excellent agreement for x-ray tube voltages from 10 to 100 kV.

Dose reduction in full-field digital mammography: an anthropomorphic breast phantom study.

The aim of this study was to evaluate the potential for radiation dose reduction by using other beam qualities in full-field digital mammography (FFDM) compared with screen-film mammography (SFM). FFDM was performed using an amorphous silicon detector with a caesium iodide scintillator layer (Senographe 2000D, GE, Milwaukee, USA). SFM was performed using a state-of-the-art conventional system (Senographe DMR, GE, Milwaukee, USA) with a dedicated screen-film combination. An anthropomorphic breast phantom with superimposed microcalcifications (50-200 microm) was used to evaluate the detectability of microcalcifications. Contact mammograms and magnification views (m=1.8) performed with both the digital and the screen-film system were compared. Images were exposed automatically. Molybdenum/Molybdenum (Mo/Mo) anode-filter combination, 28 kVp and 63 mAs were selected by the automatic optimization of parameters (AOP) of the conventional system. This exposure protocol (protocol A) was also used as baseline for the digital system. Dose reduction in digital mammography was achieved by using protocol B with Mo/Rh and 31 kVp and protocol C with Rh/Rh and 32 kVp. The detectability of microcalcifications was assessed by 3 experienced readers with a confidence level ranging from 1 to 5. A receiver operating characteristic (ROC) analysis was performed. In protocol A the area under the ROC-curve (A(z)) for contact views performed by the screen-film system was 0.64 and for those performed with the FFDM system 0.68. The A(z) values were 0.74 in protocol B and 0.65 in protocol C for the digital system. For the conventional and digital magnification views A(z) values were 0.71 and 0.79, respectively. For protocol B the A(z) value was 0.81 and for protocol C it was 0.76. There is no statistically significant difference in the A(z) values for the different protocols in digital mammography and no significant difference from the screen-film system. A potential for dose reduction by using other beam qualities seems to be possible with this digital system.

Storage phosphor direct magnification mammography in comparison with conventional screen-film mammography--a phantom study.

Contact mammography with current photostimulable storage phosphors is hampered by its low spatial resolution. Detail visualization can be improved by geometric magnification radiography which enlarges small details to exceed inherent image noise. This study compares storage phosphor mammography using a dedicated direct magnification system with state-of-the-art conventional screen-film mammography. Storage phosphor direct magnification survey views (1.7x) and spot views (4x) were obtained with a prototype mammography unit providing focal spot sizes of 120-40 microns. Conventional technique screen-film survey views (1.1x) and spot views (1.8x) served as comparison. A contrast detail study and a receiver operating characteristic (ROC) analysis using an anthropomorphic breast phantom with superimposed microcalcifications was performed. Contrast detail resolution in the digital and conventional survey views were equivalent. For the spot views, contrast detail resolution was significantly higher with the digital technique (p < 0.001). ROC analysis of 400 observations demonstrated a significantly higher performance (p < 0.001) with digital images versus conventional screen-film mammograms. The area under the ROC curve (Az) in the digital survey views was 0.76 +/- 0.07 versus 0.59 +/- 0.02 in the conventional technique. In digital spot views, Az was 0.82 +/- 0.07 as compared with 0.66 +/- 0.04 in the conventional spot views. These results suggest that storage phosphor digital mammography in conjunction with direct geometric magnification technique may be superior to conventional screen-film mammography in the detection of microcalcifications.

[Radiation exposure in full-field digital mammography with a flat-panel x-ray detector based on amorphous silicon in comparison with conventional screen-film mammography]. / Strahlenexposition bei der digitalen Vollfeldmammographie mit einem Flachdetektor aus amorphem Silizium im Vergleich zur konventionellen Film-Folien-Mammographie.

PURPOSE: Comparison of radiation exposure between a digital amorphous silicon and a screen-film based mammography system. Evaluation of a possible potential of full-field digital mammography in order to decrease the radiation dose. METHODS: The average glandular dose for phantom thicknesses from 30 to 60 mm was calculated from experimentally determined entrance surface air kerma for a digital and a conventional mammography system. The effect of reducing the detector dose and of changing the radiation quality on radiation exposure and on image quality were investigated. RESULTS: By using the delivered settings of the automatic exposure control (AEC) devices, both mammographic systems needed nearly the same doses. Regulations and guidelines on radiation doses were complied. With the digital system, a reduction of radiation exposure of up to 40% by using a higher radiation quality and decreasing slightly the detector dose without loss of diagnostic image quality, might be possible. CONCLUSION: The potential of full-field digital mammography for radiation dose reduction, as shown in the present phantom study, needs however, a careful examination under clinical conditions.

[Full-field digital mammography: dose-dependent detectability of breast lesions and microcalcinosis]. / Digitale Vollfeldmammographie: Dosisabhängige Detektion von simulierten Herdbefunden und Mikrokalzifikationen.

OBJECTIVES: The study compares contrast-detail and microcalcification detectability of a full-field digital mammography (FFDM) to a state-of-the-art conventional screen-film mammography (SFM) by using different doses in the digital system. MATERIALS AND METHODS: The investigations were performed with an FFDM (Senographe 2000 D, GEMS) and an SFM system (Senographe DMR, GEMS) using a contrast-detail mammography phantom (CDMAM) and an anthropomorphic breast phantom with superimposed microcalcifications. The digital detector was exposed with standard dose of SFM and with a dose reduction of up to 75%. Contrast-detail curves and correct observation ratio (COR) were performed for the CDMAM phantom. ROC analysis with a confidence level ranging from 1 to 5 was done with the results of the anthropomorphic phantom. RESULTS: Digital mammography with the same dose revealed at least an equivalent or even higher detectability rate than conventional mammography, COR could be increased at about 10-25%. The ROC analysis yielded better results for the FFDM system. The same lesion detectability in digital mammography as in the conventional method was reached at a dose reduction of about 25%, concerning spot views even at higher reduction. Dose reduction in the anthropomorphic phantom resulted in a linear loss of detectability. The same detectability as in conventional mammography was reached, however, by a dose reduction of about 50%. CONCLUSION: The results suggest that FFDM is at least equivalent to or--as far as spot views are concerned--superior to conventional SFM concerning the detectability of simulated lesions. Thus, a potential of dose reduction is suggested.

Average glandular dose with amorphous silicon full-field digital mammography - Clinical results.

PURPOSE: Determination of average glandular dose with a full-field digital mammography system using a flat-panel X-ray detector based on amorphous silicon technology for a large group of patients. MATERIAL AND METHODS: The patient group includes women who were examined in a 4-month period with the digital mammographic system Senographe 2000D. The number of women was 591 and the number of exposures was 1116; only cranio-caudal projections were considered. Various quantities, including entrance surface air kerma, tube loading, and compressed breast thickness, were determined during actual mammography. Average glandular dose was determined using conversion factors g for standard breast composition. RESULTS: The mean average glandular dose was 1.51 mGy (0.66 - 4.05 mGy) for a single view. The mean compressed breast thickness was 55.7 mm. The mean age of patients was 55 years (34 - 81 years). CONCLUSION: The results demonstrate that full-field digital mammography with a flat-panel detector based on amorphous silicon needs about 25 % less dose in comparison with conventional screen-film mammography.

[DIMA-magnification mammography. Phantom studies on image quality and radiation exposure of the patient]. / DIMA-Vergrösserungsmammographie. Phantomuntersuchungen zur Bildqualität und zur Strahlenexposition der Patientin.

PURPOSE: A mammographic system has been developed to provide direct radiographic magnification; investigation of image quality and radiation exposure for surveys and aimed exposures were carried out on phantoms and the results compared with two modern screen methods. MATERIAL AND METHOD: Image quality was defined by contrast transfer function, resolution of low contrast, contrast of large areas and recognition of low contrast detail, using suitable phantoms. Measurements of entrance surface dose were made with a 1 cm3 flat chamber. RESULTS: For survey examinations, the new mammographic system provided image quality equal to a screen system but using 50% radiation dose. For localised views, the new system used similar radiation dose but provided significantly better demonstration of diagnostic detail. CONCLUSION: Using a focal spot of 40-120 microns, the new mammographic system provides markedly improved direct radiographic magnification. With reduced radiation exposure at times, there is a significant gain in diagnostic information compared with current standard systems.

[Full-field digital mammography: a phantom study for detection of microcalcification]. / Digitale Vollfeldmammographie: Phantomstudie zur Detektion von Mikrokalk.

OBJECTIVES: The study compares direct full-field digital mammography (FFDM) to the state-of-the-art conventional screen-film mammography (SFM) concerning the detectability of simulated microcalcifications. MATERIALS AND METHODS: The investigations were performed with a FFDM system (Senographe 2000D, GEMS) and a SFM system (Senographe DMR, GEMS, Fuji UM MA film with Fuji UM MAMMO FINE screen). An anthropomorphic breast phantom with superimposed microcalcifications (50-200 microns) was used to evaluate the detectability of microcalcifications with a confidence level ranging from 1 to 5. Contact mammograms and magnification spot views (m = 1.8) of the FFDM and SFM systems were compared. A receiver operating characteristic (ROC) analysis was performed by three well-experienced readers. RESULTS: The ROC analysis revealed a higher performance of the digital images compared to the conventional screen-film mammograms. The area under the ROC-curve (Az) in the digital contact mammograms was 0.68 versus 0.63 in the conventional technique. The results were not significantly different. In digital spot views, Az was 0.79 versus 0.70 in the conventional spot views. CONCLUSIONS: The results suggest that FFDM is at least equivalent or--as far as spot views are concerned--may be superior to conventional SFM in the detection of microcalcifications.

[An anatomically adapted variation of the tube current in CT. Studies on radiation dosage reduction and image quality]. / Anatomisch adaptierte Variation des Röhrenstroms bei der CT. Untersuchungen zur Strahlendosisreduktion und Bildqualität.

PURPOSE: To assess the impact of a method for anatomically adapted tube current variation. The resulting CT image quality was evaluated quantitatively and qualitatively. METHODS: CT scans of 100 patients were performed with a constant tube current (Group 1) and another 100 patients with an anatomically adapted tube current (Group 2). The CT tube current was varied during a 360 degrees tube rotation reflecting the measured density values extracted from two perpendicular scout views. The standard deviation of densities of defined regions was measured. The image quality was ranked (1 = non-diagnostic-5 = excellent) by three radiologists. RESULTS: The effective tube current could be reduced by an average of 8.9% (0-20.4%). The mean tube current reduction depended on the body region: pelvis (13.2%), abdomen (8.4%) and thorax (3.3%). The image quality was not significantly reduced in Group 2. CONCLUSION: The method for anatomically adapted tube current variation leads especially in the pelvis to a significant mAs reduction without considerable loss of image quality.

[A bimetal anode with tungsten or rhodium? Comparative studies on image quality and dosage requirement in mammography]. / Bimetallanode mit Wolfram oder Rhodium? Vergleichende Untersuchungen zur Bildqualität und zum Dosisbedarf in der Mammographie.

PURPOSE: The impact of different anode materials (tungsten and rhodium) on spatial resolution, image contrast and radiation exposure was studied. MATERIALS AND METHODS: Two mammographic systems providing bimetal x-ray tubes (Mo/W and Mo/Rh) were compared by imaging a breast radiography phantom with additional acrylic plates from 3 to 8 cm thickness. Spatial resolution was evaluated using a line bar pattern. Image contrast was assessed by measuring the ratio of optical densities in a acrylic step-wedge. The entrance dose was measured with a low energy ionisation chamber. RESULTS: The spatial resolution was about 13 lp/mm regardless of the beam quality. The image contrast depended substantially on the thickness. A similar image contrast was found with Mo/Mo, Mo/Rh and Rh/Rh for simulated breast thicknesses of 4 to 6 cm and with Rh/Rh and W/Rh for 7 cm. In comparison to Mo/Mo the dose reduction was significant for Mo/Rh (35%), Rh/Rh (50%) and W/Rh (60%). CONCLUSIONS: Bimetal x-ray tubes provide optimal conditions for screen film mammography of both normal and dense breasts, allowing good contrast and dose reduction by using the adequate anode/filter-combination.

[Dental CT: image quality and radiation exposure in relation to scan parameters]. / Dental-CT: Bildqualität und Strahlenexposition in Abhängigkeit von den Scanparametern.

PURPOSE: To develop a scan protocol for dental-CT which guarantees good image quality at the lowest possible radiation dose. METHODS: In an experimental investigation Dental-CT (HSA, GE, Milwaukee, USA) of the mandible of two human skeletons positioned in a water tank were performed in order to define the most advantageous scan protocol. Tube currents ranged from 40 to 200 mA and the scan technique was modified (axial mode or helical mode with pitches of 1 to 3 and corresponding increments of 0.4 to 1.0 mm). 39 patients underwent a dental-CT with decreased current (80 mA) in the helical scan mode (pitch 2, slice thickness 1 mm). Dose measurements were performed for two different scan protocols (A: axial, 130 mAs, B: helical, 80 mA, pitch 2). RESULTS: The preliminary investigations of image quality showed only a minor effect of the applied current. For the helical scan mode, pitches of more than 2 impaired image quality. A low increment had no advantages. There were no disadvantages in clinical practice using protocol B with decreased tube current. Absorbed radiation dose of dental CT performed with protocol B was decreased to one third in comparison to protocol A. CONCLUSIONS: A scan protocol with a low tube current (e.g., 80 mA, for a rotation time of 1 s) and a helical scan mode (e.g., for a slice thickness of 1 mm with a pitch of 2 and an increment of 1 mm) is recommended for performing dental-CT.

[Direct digital magnification mammography with a large-surface detector made of amorphous silicon]. / Direkt digitale Vergrösserungsmammographie mit einem grossflächigen Detektor aus amorphem Silizium.

PURPOSE: To investigate the image quality of a new direct digital mammography system using a large-area amorphous silicon X-ray detector in a phantom study. MATERIALS AND METHODS: The contrast-detail resolution as a function of the tube voltages, the magnification factors and the mean glandular doses were investigated using dedicated test objects. RESULTS: The contrast-detail resolution was significantly improved in comparison with conventional screen-film mammography. Usually, the doses necessary to obtain these high-quality survey mammograms were smaller. CONCLUSIONS: By combining the direct magnification technique and a digital flat panel detector the limited spatial resolution of such image receptors can be overcome. With this direct digital mammography technique, a digital image was directly captured without an intermediate step of optical or mechanical scan.