RESUMO
The study aimed to fingerprint the physical manufacturing properties of five commonly used acid sources in effervescent systems for designing the formulation and process of such systems. The hygroscopicity, texture properties, rheological torque, compressibility, tabletability, etc., were investigated to inspect 'powder direct compression (DC)' and 'wet granulation and compression' properties of citric (CA), tartaric (TA), malic (MA), fumaric (FA), and adipic acid (AA). The DC ability was evaluated by the SeDeM expert system. The results indicated that all acid powders failed to meet flowability requirements for DC, and plastic deformation dominated during compression. Furthermore, CA exhibited strong hygroscopicity and punch sticking, while MA demonstrated the best tabletability. TA had a large wet granulation space and was relatively the most suitable for DC. AA was extremely hygroscopic, and its flowability improved significantly as particle size increased. Finally, FA displayed the lowest hygroscopicity and ejection force as well as great compressibility and wet granulation space, and did not exhibit punch sticking, while the granule fragments dissolved slowly during disintegration. Generally speaking, the formulation or granulation affected the tabletability, indicating that pairing with other acids or suitable fillers could potentially improve its disadvantages. These multidimensional assessments effectively reduce the pre-exploration and enhance the efficiency of the development of effervescent systems.
RESUMO
Personalized traditional Chinese medicine(TCM) preparations have entered a stage of rapid development. The key to the healthy development of this industry is to establish a sound manufacturing standard and quality control system. This paper analyzed the characteristics of personalized TCM preparations and drew reference from the quality management standards in the production of commissioned decoctions and oral pastes, on the basis of which the production quality management scheme and cautions for the safe production of personalized TCM preparations was put forward with consideration to various problems that may exist and occur in the production of such preparations. It provided references for formulating the production standards and quality management system of personalized TCM preparations. The production standards and quality control system should develop with the times. In the future, modern technologies such as big data and artificial intelligence should be employed to achieve the automated and intelligent production and establish a sound quality traceability system, online control strategy, and safety management mode of personalized TCM preparations, which will ensure the healthy development of this industry under requirement of good manufacturing practice(GMP).
Assuntos
Produtos Biológicos , Medicamentos de Ervas Chinesas , Medicina Tradicional Chinesa , Medicamentos de Ervas Chinesas/uso terapêutico , Inteligência Artificial , Controle de Qualidade , Padrões de ReferênciaRESUMO
Extracts are important intermediates in the production of traditional Chinese medicines preparations. The drying effect of extracts will directly affect the subsequent production process and the quality of the preparation. To meet the requirements of high drug loading, short time consumption, and simple production process of personalized traditional Chinese medicine preparations, this study explored the application of multi-program microwave vacuum drying process in the extract drying of personalized traditional Chinese medicine preparations. The influencing factors of microwave vacuum drying process were investigated for 5 excipients and 40 prescriptions. Taking the feasibility of drying, drying rate, drying time, and dried extract status as indicators, this study investigated the feeding requirements of microwave vacuum drying. With the dried extract status as the evaluation indicator, the three drying programs(A, B, and C) were compared to obtain the optimal drying condition. The experimental results showed that the optimal feeding conditions for microwave vacuum drying were material layer thickness of 2 cm and C program(a total of 7 drying processes), which solved the problem of easy scorching in microwave drying with process management. Furthermore, the preset moisture content of the dried extract in microwave drying should be 4%-5%, so that the dried extract of traditional Chinese medicine preparation had uniform quality, complete drying, and no scorching. This study lays a foundation for the application of microwave drying in the production of traditional Chinese medicine preparations, promoting the high-quality development of personalized traditional Chinese medicine preparations.
Assuntos
Medicina Tradicional Chinesa , Micro-Ondas , Vácuo , Dessecação/métodos , Extratos VegetaisRESUMO
This study aims to optimize the matrix formulation for the hot-melt pressure-sensitive adhesive plaster of personalized traditional Chinese medicine(TCM) preparations and verify the applicability of the formulation. The central composite design in JMP Pro 16.1.0 was employed to optimize the dosages of styrene-isoprene-styrene triblock copolymer(SIS), hydrogenated petroleum resin, and lightweight liquid paraffin, with the fine powder of Yipifang as the model drug(drug loading of 10%) and the sensory score and objective evaluation as the comprehensive evaluation indicators. The quality evaluation system of hot-melt pressure-sensitive adhesive plaster of personalized TCM preparations was established. The applicability of the optimized matrix formulation of hot-melt pressure-sensitive adhesive plaster was verified with 16 TCM preparations for external application. Furthermore, the applicability of the matrix formulation was investigated with different drug loadings. The general molding matrix formulation was SISâ¶hydrogenated petroleum resinâ¶lightweight liquid paraffin 3â¶3â¶5. The optimized matrix formulation showed good molding properties and high quality scores for 16 TCM preparations and were suitable for the plastering of finely powdered decoction pieces with a loading capacity of 10% to 30%. The results suggest that the optimized matrix formulation has good applicability and is suitable for TCM preparations. The findings lay a foundation for the application and promotion of the hot-melt pressure-sensitive adhesive plasters of personalized TCM preparations.
Assuntos
Medicamentos de Ervas Chinesas , Petróleo , Medicina Tradicional Chinesa , Óleo Mineral , PoliestirenosRESUMO
This study aims to optimize the prediction model of personalized water pills that has been established by our research group. Dioscoreae Rhizoma, Leonuri Herba, Codonopsis Radix, Armeniacae Semen Amarum, and calcined Oyster were selected as model medicines of powdery, fibrous, sugary, oily, and brittle materials, respectively. The model prescriptions were obtained by uniform mixing design. With hydroxypropyl methylcellulose E5(HPMC-E5) aqueous solution as the adhesive, personalized water pills were prepared by extrusion and spheronizaition. The evaluation indexes in the pill preparation process and the multi-model statistical analysis were employed to optimize and evaluate the prediction model of personalized water pills. The prediction equation of the adhesive concentration was obtained as follows: Y_1=-4.172+3.63X_A+15.057X_B+1.838X_C-0.997X_D(adhesive concentration of 10% when Y_1<0, and 20% when Y_1>0). The overall accuracy of the prediction model for adhesive concentration was 96.0%. The prediction equation of adhesive dosage was Y_2=6.051+94.944X_A~(1.5)+161.977X_B+70.078X_C~2+12.016X_D~(0.3)+27.493X_E~(0.3)-2.168X_F~(-1)(R~2=0.954, P<0.001). Furthermore, the semantic prediction model for material classification of traditional Chinese medicines was used to classify the materials contained in the prescription, and thus the prediction model of personalized water pills was evaluated. The results showed that the prescriptions for model evaluation can be prepared with one-time molding, and the forming quality was better than that established by the research group earlier. This study has achieved the optimization of the prediction model of personalized water pills.
Assuntos
Medicamentos de Ervas Chinesas , Medicina Tradicional Chinesa , Água , Semântica , PrescriçõesRESUMO
This study aims to optimize the composite excipients suitable for the preparation of concentrated water pills of personalized traditional Chinese medicine prescriptions by the extruding-rounding method and investigate the roles of each excipient in the preparation process. The fiber materials and powder materials were taken as the standard materials suitable as excipients in the preparation of personalized concentrated water pills without excipient. Water absorption properties and torque rheology were used as indicators for selecting the materials of composite excipients. The ratio of composite excipients was optimized by D-optimal mixture design. Moreover, to demonstrate the universal applicability of the optimal composite excipients, this study selected three traditional Chinese medicine prescriptions with low, medium, and high extraction rates to verify the optimal ratio. Finally, the effects of each selected excipient on the molding of personalized concentrated water pills were investigated with the four parameters of the pill molding quality as indicators. The optimized composite excipients were dextrinâ¶microcrystalline cellulose(MCC)â¶low-substituted hydroxypropyl cellulose(L-HPC) at a ratio of 1â¶2â¶4. The composite excipients were used for the preparation of personalized concentrated water pills with stable process, good quality, and a wide range of application. Dextrin acted as a diluent and accelerated the speed of extruding. MCC mainly served as an adhesive, increasing the cohesion and viscosity of the pills. L-HPC as a water absorbent and disintegrating agent can absorb and hold the water of the concentrate and has a strong disintegration effect.
Assuntos
Medicamentos de Ervas Chinesas , Excipientes , Excipientes/química , Medicina Tradicional Chinesa , Água/química , Medicamentos de Ervas Chinesas/químicaRESUMO
In recent years, as people's living standards continue to improve, and the pace of life accelerates dramatically, the demand and quality of traditional Chinese medicine(TCM) services from patients continue to rise. As an essential supplement to the existing forms of TCM application, such as Chinese patent medicine, decoction, and formulated granules, presonalized TCM preparations is facing an increasing market demand. Currently, manual and semi-mechanized production are the primary production ways in presonalized TCM preparations. However, the production process control level is low, and digitalization and informatization need to be improved, which restricts the automated and intelligent development of presonalized TCM preparations. Presonalized TCM preparations faces a significant opportunity and challenge in integrating with intelligent manufacturing through research and development of intelligent equipment and core technology. This paper overviews the connotation and characteristics of intelligent manufacturing and summarizes the application of intelligent manufacturing technologies such as "Internet of things" "big data", and "artificial intelligence" in the TCM industry. Based on the innovative research and development model of "intelligent classification of TCM materials, intelligent decision making of prescription and process, and online control and intelligent production" of presonalized TCM preparations, the research practice and achievements from our research group in the field of intelligent manufacturing of presonalized TCM preparations are introduced. Ultimately, the paper proposes the direction for developing intelligent manufacturing of presonalized TCM preparations, which will provide a reference for the research and application of automation and intelligence of presonalized TCM preparations.
Assuntos
Medicamentos de Ervas Chinesas , Medicina Tradicional Chinesa , Humanos , Controle de Qualidade , Tecnologia Farmacêutica , InteligênciaRESUMO
This paper aims to study the correlation between the physicochemical properties of raw materials and intermediates and the molding quality and law of traditional Chinese medicine(TCM) gel plaster by using TCM slices and powder as raw materials. 48 TCM compounds are selected as model prescriptions to prepare gel plasters. The rotational rheometer is used to determine the rheological parameters of the plaster, including storage modulus(G'), loss modulus(Gâ³), yield stress(τ), and creep compliance [J(t)]. The molding quality of the prepared TCM gel plaster is evaluated by subjective and objective measures. Clustering and principal component analysis are conducted to evaluate the physical properties of the plaster. By measuring the rheological properties of the plaster, the molding quality of the TCM gel plaster can be predicted, with an accuracy of 83.72% after seven days of modeling and 88.37% after 30 days of modeling. When the parameters such as G' and Gâ³ of the plaster are large, and the [J(t)] is small, the molding quality of the plaster is better. When the plaster coating point is no less than 3, it is difficult to be coated. In addition, when the proportion of metal ions in the prescription is higher, the 30-day forming quality of the plaster is mainly affected, and the viscosity of the plaster is poor. If the prescription contains many acidic chemical components, the 7-day forming quality of the plaster is mainly affected, with many residuals. The results suggest that the rheological properties of the plaster can be used to predict the molding quality of TCM slice and powder gel plaster. It can provide a reference for the development of TCM gel plaster prescriptions.
Assuntos
Medicina Tradicional Chinesa , Prescrições , Pós , Viscosidade , ReologiaRESUMO
A method for material classification of traditional Chinese medicines based on the physical properties of powder has been established by our research group. This method involves pre-treatment of traditional Chinese medicine decoction pieces, powder preparation, and determination of physical properties, being cumbersome. In this study, the word segmentation logic of semantic analysis was adopted to establish the thesaurus and local standardized semantic word segmentation database with the macroscopic and microscopic characteristics of 36 model traditional Chinese medicines as the basic data. The physical properties of these medicines have been determined and the classification of these medicines is clear in the cluster analysis. A total of 55 keywords for powdery, fibrous, sugary, oily, and brittle materials were screened by association rules and the set inclusion and exclusion criteria, and the weights of the keywords were calculated. Furthermore, the algorithms of the keyword matching scores and the computation rules of the single or multiple material classification were established for building the intelligent model of semantic analysis for the material classification. The semantic classification results of the other 35 TCMs except Pseudostellariae Radix(multi-material medicine) agreed with the clustering results based on the physical properties of the powder, with an agreement rate of 97.22%. In model validation, the prediction results of semantic classification of traditional Chinese medicines were consistent with the clustering results based on the physical properties of powder, with an agreement rate of 83.33%. The results showed that the method of material classification based on semantic analysis was feasible, which laid a foundation for the development of intelligent decision-making technology for personalized traditional Chinese medicine preparations.
Assuntos
Medicamentos de Ervas Chinesas , Medicina Tradicional Chinesa , Pós , Semântica , Raízes de PlantasRESUMO
In the process of preparing presonalized concentrated watered pills, the decoction needs to be concentrated by heat and mixed with medicinal slices or powder to prepare a wet mass. However, some of the traditional Chinese medicine(TCM) components are easily decomposed or transformed by heat. In order to optimize the preparation process of presonalized TCM concentrated watered pills and reduce the loss of heat-unstable components in prescriptions, this study uses five compound TCM prescriptions containing heat-unstable components as model prescriptions, namely the Linggui Zhugan Formula, Xiaochengqi Formula, Sanpian Formula, Xiaoer Qixing Formula, and Xiaoyao Formula. Based on the two kinds of preparation process of presonalized concentrated watered pills previously established by our research group, whole extract concentrated watered pills and concentrated watered pills without excipients are prepared, respectively. Characteristic maps are measured and compared with those of the corresponding decoction. The results show that the characteristic maps of the concentrated watered pills without excipients of the five model prescriptions are very close to those of the decoction, and the number of characteristic peaks and peak areas are higher than those of whole extract concentrated watered pills. In addition, the peak area of some peaks is higher than that of the corresponding decoction. Thus, it is recommended to select the preparation process of prescription-based concentrated watered pills without excipients based on the "unification of medicines and excipients" to preserve those heat-unstable components more effectively when the prescription contains a heat-unstable component of TCM. This study provides a basis for the subsequent reasonable development and application of presonalized TCM pills.
Assuntos
Medicamentos de Ervas Chinesas , Medicina Tradicional Chinesa , Excipientes , Temperatura Alta , PrescriçõesRESUMO
According to the method of predicting the physical properties of oily powder based on the additive physical properties of Chinese medicinal powder, Dioscoreae Rhizoma and calcined Ostreae Concha with high sieve rate and good fluidity were mixed and crushed with Persicae Semen, Platycladi Semen, Raphani Semen, Ziziphi Spinosae Semen, and other typical oily materials with high fatty oil content in proportion to obtain 23 mixed powders. Fifteen physical properties such as bulk density, water absorption, and maximum torque force were measured, and the physical properties of typical oily powders were predicted. When the mixing and grinding ratio was in the range of 5â¶1-1â¶1, the r value in the correlation equation between the weighted average score of the mixed powder and the powder proportion ranged from 0.801 to 0.986, and the linearity was good, indicating that the method of predicting the physical properties of oily powder based on the additive physical properties of traditional Chinese medicine(TCM)powder was feasible. The results of cluster analysis showed that the classification boundaries of the five kinds of TCM materials were clear, and the similarity of the physical fingerprints of powdery and oily materials decreased from 80.6% to 37.2%, which solved the problem of fuzzy classification boundaries of powdery and oily materials due to the lack of representativeness of oily material model drugs. The classification of TCM materials was optimized, laying a foundation for optimizing the prediction model of the prescription of personalized water-paste pills.
Assuntos
Medicamentos de Ervas Chinesas , Medicina Tradicional Chinesa , Pós , PrescriçõesRESUMO
Hydrogels are a fascinating class of materials popular in numerous fields, including tissue engineering, drug delivery, soft robotics, and sensors, thanks to their 3D network porous structure containing a significant amount of water. However, traditional hydrogels exhibit poor mechanical strength, limiting their practical applications. Thus, many researchers have focused on the development of mechanically enhanced hydrogels. This review describes the design considerations for constructing tough hydrogels and some of the latest strategies in recent years. These tough hydrogels have an up-and-coming prospect and bring great hope to the fields of biomedicine and others. Nonetheless, it is still no small challenge to realize hydrogel materials that are tough, multifunctional, intelligent, and with zero defects.
Assuntos
Hidrogéis , Engenharia Tecidual , Hidrogéis/química , PorosidadeRESUMO
AMP-activated protein kinase (AMPK) regulates overall energy consumption and energy intake through cytokines. Ligusticum striatum DC (CX) combined with Gastrodia elata Blume (TM) has been used for migraine treatment for millennia. When used alone in clinical practice, CX causes symptoms of thirst, irritability, and yellow urine and has influenced the levels of cytokines such as AMP that activate the AMPK pathway of energy metabolism. However, relationships between this compatibility prescription, integral biological energy metabolism, and the AMPK pathway remain unclear. Studies were performed by treating normal rats with physiological saline, CX extract, CX coupled TM extract, and TM extracts separately for 4 weeks. Food intake, water intake, urine output, stool output, and body weight were monitored once a week by the metabolic cage method. Values of FBG, BUN, TP, TC and TG in blood samples were detected approaching the whole blood automatic detector from 1 to 4 weeks. Na+ -K+ -ATPase, Ca2+ -Mg2+ -ATPase, cAMP, and cGMP activity were determined by the enzyme-linked immunosorbent assay (ELISA); the biological samples that were obtained at 1, 2, 3, and 4 weeks after drug administration were tested by GC-TOF-MS. Then real-time PCR and Western Blot were applied to detect changes in expression of some substances involved in energy metabolism. The results demonstrated that administering CX alone increased energy input, mobility, and respiratory exchange ratio, accelerated energy consumption, and caused inflammatory infiltration in the liver. CX coupled with TM led to lower energy metabolism and liver damage in comparison with CX used alone. Moreover, CX-treated rats harbored higher levels of differential metabolites (including pyrophosphate, oxaloacetic acid, and galactinol). Glycerophospholipid metabolism and the citrate cycle are closely related to the differential metabolites above. In addition, CX-induced unbalanced energy metabolism depends on cAMP activation mediated by the AMPK/PGC-1α pathway in rats. Our findings suggest that CX-induced energy metabolism imbalance was corrected after coupling with TM by mediating the AMPK/PGC-1α pathway.
RESUMO
Direct compression (DC) attracts increasing attention for tablet manufacturing; however, its application in medicinal plant tablets is still extremely limited. In this work, eight kinds of the Gardeniae fructus water extract powder (GF)-based composite particles (CPs) were prepared with different cohesive surface engineering materials, including dextran, inulin, hypromellose, and povidone, alone or in combination with mannitol and colloidal silica. Their physical properties and compacting parameters were characterized comprehensively. All the CPs showed marked improvement in tabletability, which is about 2-4 times higher than that of GF and physical mixtures (PMs). Specifically, the CPs showed a 7.45-26.48 times higher hardness (Ha) value and a 1.26-2.74 times higher cohesiveness (Co) value than PMs. In addition, all the CPs (angle of repose being from 34.27° to 38.46°) showed better flowability than PMs (35.49° to 53.53°) and GF (51.86°). These results demonstrated that (i) fluid-bed coating was not a simple process of superposition and transmission of the physical properties of raw materials; and (ii) all the surface engineering materials studied could improve the DC properties of problematic GF to some degree. As a whole, through the design of fluid-bed coating CPs, qualified tablets with high GF loadings (up to 93%) were produced via DC.
Assuntos
Gardenia , Dextranos , Composição de Medicamentos/métodos , Derivados da Hipromelose , Inulina , Manitol , Tamanho da Partícula , Povidona , Pós , Dióxido de Silício , Propriedades de Superfície , Comprimidos , ÁguaRESUMO
Due to the high surface area, adjustable surface and pore structures, and excellent biocompatibility, nano- and micro-sized silica have certainly attracted the attention of many researchers in the medical fields. This review focuses on the multifunctional roles of silica in different pharmaceutical formulations including solid preparations, liquid drugs, and advanced drug delivery systems. For traditional solid preparations, it can improve compactibility and flowability, promote disintegration, adjust hygroscopicity, and prevent excessive adhesion. As for liquid drugs and preparations, like volatile oil, ethers, vitamins, and self-emulsifying drug delivery systems, silica with adjustable pore structures is a good adsorbent for solidification. Also, silica with various particle sizes, surface characteristics, pore structure, and surface modification controlled by different synthesis methods has gained wide attention owing to its unparalleled advantages for drug delivery and disease diagnosis. We also collate the latest pharmaceutical applications of silica sorted out by formulations. Finally, we point out the thorny issues for application and survey future trends pertaining to silica in an effort to provide a comprehensive overview of its future development in the medical fields. Graphical Abstract.
Assuntos
Sistemas de Liberação de Medicamentos , Dióxido de Silício , Composição de Medicamentos , Tamanho da Partícula , Preparações Farmacêuticas , Dióxido de Silício/químicaRESUMO
Aiming to solve the poor compactibility of the alcoholic extract of Zingiberis Rhizoma(ZR), this study explored the feasibility of its physical modification using co-spray drying with a small amount of hydroxypropyl methyl cellulose(HPMC). Based on the univariate analysis, the influence of two independent variables(the HPMC content in the product and the solid content of spray material) on the powder properties and tablet properties of the dried product was investigated by the central composite design. With the tensile strength and disintegration time of the tablets as the evaluation indexes, the optimal prescription was determined as follows: the HPMC content was 15% and the solid content of spray material was 25.6%. The accuracy of the regression model established for predicting tensile strength and disintegration time of tablets was verified, and the results revealed that the measured values were close to the predicted ones with deviations of 0.47% and-8.2%, indicating good prediction and reproducibility of the model. The tensile strength(4.24 MPa) of tablets prepared with the optimal prescription was 3.59 times that(1.18 MPa, far lower than the baseline of 2 MPa for qualified tablets) with the spray-dried powder of the ZR. On the other hand, due to the addition of HPMC, the disintegration time of tablets increased from 7.3 min to 24.6 min. On the whole, this study provided a new strategy to solve the common problem of poor compactibility of raw Chinese medicinal materials, which facilitated the successful preparation of Chinese medicinal tablets with high drug loads.
Assuntos
Rizoma , Secagem por Atomização , Zingiber officinale , Extratos Vegetais , Reprodutibilidade dos TestesRESUMO
Three new monoterpenoids, named eucomylides A-C (1-3), along with six known compounds (4-9) were isolated from the staminate flowers of Eucommia ulmoides Oliver. The structures were elucidated by extensive analyses of spectroscopic methods, and their absolute configurations were established by time-dependent density functional theory electronic circular dichroism (TDDFT ECD) calculation. All the compounds along with previously isolated components (10-14) were tested for their anti-inflammatory effects. Two iridoid glycosides (11 and 12) and a flavonoid glycoside (14) showed potent suppressive effects on nitric oxide (NO) production in RAW 264.7 cells, with IC50 values ranging from 17.11 to 22.26â µM.
Assuntos
Anti-Inflamatórios/química , Eucommiaceae/química , Monoterpenos/química , Animais , Anti-Inflamatórios/isolamento & purificação , Anti-Inflamatórios/farmacologia , Dicroísmo Circular , Teoria da Densidade Funcional , Eucommiaceae/metabolismo , Flores/química , Flores/metabolismo , Lipopolissacarídeos/farmacologia , Macrófagos/citologia , Macrófagos/efeitos dos fármacos , Macrófagos/metabolismo , Camundongos , Conformação Molecular , Monoterpenos/isolamento & purificação , Monoterpenos/farmacologia , Óxido Nítrico/metabolismo , Células RAW 264.7RESUMO
Polyvinylpyrrolidone (PVP), a non-ionic polymer, has been employed in multifarious fields such as paper, fibers and textiles, ceramics, and pharmaceutics due to its superior properties. Especially in pharmacy, the properties of inertness, non-toxicity, and biocompatibility make it a versatile excipient for both conventional formulations and novel controlled or targeted delivery systems, serving as a binder, coating agent, suspending agent, pore-former, solubilizer, stabilizer, etc. PVP with different molecular weights (MWs) and concentrations is used in a variety of formulations for different purposes. In this review, PVP-related researches mainly in recent 10 years were collected, and its main pharmaceutical applications were summarized as follows: (i) improving the bioavailability and stability of drugs, (ii) improving the physicomechanical properties of preparations, (iii) adjusting the release rate of drugs, and (iv) prolonging the in vivo circulation time of liposomes. Most of these applications could be explained by the viscosity, solubility, hydrophilicity, and hydrogen bond-forming ability of PVP, and the specific action mechanisms for each application were also tried to figure out. The effect of PVP on bioavailability improvement establishes it as a promising polymer in the emerging controlled or targeted formulations, attracting growing interest on it. Therefore, given its irreplaceability and tremendous opportunities for future developments, this review aims to provide an informative reference about current roles of PVP in pharmacy for interested readers.
Assuntos
Composição de Medicamentos , Preparações Farmacêuticas/química , Povidona/química , Disponibilidade Biológica , Portadores de Fármacos , Excipientes , Interações Hidrofóbicas e Hidrofílicas , Polímeros , Solubilidade , ViscosidadeRESUMO
Considering the characteristic chromatograms and quality value transmitting of three volatile components, this study investigated the changes in volatile components of Menthae Haplocalycis Herba in each heating process of personalized preparations and identified the critical control points for the application of volatile components from traditional Chinese medicine in such preparations. The characteristic chromatograms of volatile components in Menthae Haplocalycis Herba were established by gas chromatography, followed by the quantitative determination of three volatile components menthone, menthol, and piperitone and the comparison of retention rates of volatile components during the crushing, extraction, concentration and drying of preparation products and their change rules in characteristic peaks. The results showed that the volatile components of Menthae Haplocalycis Herba were reduced in each process. The loss rate was low in the crushing process when the volatile component peaks were present, but high in the extraction and concentration processes, manifested as the absence of partial component peaks and the presence of new component peaks. The changes in volatile components of Chuanxiong Chatiao Granule in the drying process were compared with those in Chuanxiong Chatiao Pill, both of which were prepared from the raw Menthae Haplocalycis Herba powder, and the findings demonstrated that Chuanxiong Chatiao Pill was superior to Chuanxiong Chatiao Granule. This study confirmed that the retention rates of volatile components in Menthae Haplocalycis Herba were mostly affected by the extraction and concentration processes, and the packing of preparations helped to reduce the loss of volatile components in Menthae Haplocalycis Herba powder, which has provided reference for the application of Chinese medicinal materials containing volatile components in the personalized preparations.
Assuntos
Medicamentos de Ervas Chinesas , Medicina Tradicional Chinesa , PósRESUMO
With the continuous improvement of people's living standards and the greatly accelerated pace of life, patients' requirements for traditional Chinese medicine(TCM) pharmaceutical care are constantly raised, and personalized TCM preparations used are increasing year by year. However, a series of problems, such as the bottleneck of preparation technology, the lack of preparation specifications, and the weak legal basis for supervision, have become prominent, leading to the uneven product quality of personalized pre-parations. This paper systematically summarized and analyzed the current situation and existing problems of personalized TCM preparations, including dosage form application, preparation technology, production equipment, quality standard, clinical application, and administration mode. Additionally, it put forward an inheritance and innovation research mode of personalized TCM preparation technology based on the physical fingerprint of raw materials and innovation research and intellectual property protection mode of "research-patent-technology-equipment-standard". Furthermore, innovative development strategies were proposed, such as the production standard system of clinical preparations based on the whole process traceability and the regional processing service mode of clinical preparations based on industry 4.0. The present study is expected to provide beneficial references for the inheritance and innovation development of personalized TCM preparations.