Air-Stable Membrane-Free Magnesium Redox Flow Batteries.

Membrane-free biphasic self-stratified batteries (MBSBs) utilizing aqueous/nonaqueous electrolyte systems have garnered significant attention owing to their flexible manufacturing and cost-effectiveness. In this study, we present an ultrastable high-voltage Mg MBSB based on an aqueous/nonaqueous electrolyte system. The engineered aqueous electrolyte had a wide electrochemical stability window of 3.24 V. The Mg metal anode features a Mg2+-conductive protective coating. Two metal-free redox compounds, 2,2,6,6-tetramethylpiperdinyl oxy (TEMPO) and N-propyl phenothiazine (C3-PTZ), were used as catholytes. The Mg||TEMPO and Mg||C3-PTZ MBSBs exhibited high cell voltages of 2.07 and 2.12 V, respectively, and were studied under static, stirred, and flow conditions. The Mg MBSBs were initially evaluated at different catholyte concentrations (0.1, 0.3, and 0.5 M) under static conditions. Notably, the Mg||TEMPO (0.5 M) and Mg||C3-PTZ (0.5 M) static batteries maintained exceptional performances over 500 cycles at 8 mA/cm2, with capacity retention rates of 97.84% and 98.87%, Coulombic efficiencies of 99.17% and 99.12%, and capacity utilization of 70.2% and 71.3%, respectively. Under stirred and flow conditions, the Mg||TEMPO (0.5 M) and Mg||C3-PTZ (0.5 M) batteries cycled 500 times at 12 mA/cm2 demonstrated capacity retention rates of 99.82% and 99.88% (stirred), 93.58% and 92.16% (flow), respectively. Under flow conditions, the Mg||TEMPO (0.5 M) and Mg||C3-PTZ (0.5 M) batteries demonstrated power densities of 195 and 191 mW/cm2, respectively, surpassing those of 139 and 144 mW/cm2 under static conditions. These cost-effective Mg MBSBs exhibit remarkable performance and advance the application of Mg chemistry in organic flow batteries.

Electrosynthesis of Verdoheme and Biliverdin Derivatives Following Enzymatic Pathways.

Artificial syntheses of biologically active molecules have been fruitful in many bioinspired catalysis applications. Specifically, verdoheme and biliverdin, bearing polypyrrole frameworks, have inspired catalyst designs to address energy and environmental challenges. Despite remarkable progress in benchtop synthesis of verdoheme and biliverdin derivatives, all reported syntheses, starting from metalloporphyrins or inaccessible biliverdin precursors, require multiple steps to achieve the final desired products. Additionally, such synthetic procedures use multiple reactants/redox agents and involve multistep purification/extraction processes that often lower the yield. However, in a single step using atmospheric oxygen, heme oxygenases selectively generate verdoheme or biliverdin from heme. Motivated by such enzymatic pathways, we report a single-step electrosynthesis of verdoheme or biliverdin derivatives from their corresponding meso-aryl-substituted metalloporphyrin precursors. Our electrosynthetic methods have produced a copper-coordinating verdoheme analog in >80% yield at an applied potential of 0.65 V vs ferrocene/ferrocenium in air-exposed acetonitrile solution with a suitable electrolyte. These electrosynthetic routes reached a maximum product yield within 8 h of electrolysis at room temperature. The major products of verdoheme and biliverdin derivatives were isolated, purified, and characterized using electrospray mass spectrometry, absorption spectroscopy, cyclic voltammetry, and nuclear magnetic resonance spectroscopy techniques. Furthermore, X-ray crystallographic data were collected for select cobalt (Co)- and Cu-chelating verdoheme and metal-free biliverdin products. Electrosynthesis routes for the selective modification at the macrocycle ring in a single step are not known yet, and therefore, we believe that this report would advance the scopes of electrosynthesis strategies.

High-Voltage Catholyte for High-Energy-Density Nonaqueous Redox Flow Battery.

Redox flow batteries (RFBs) with high energy densities are essential for efficient and sustainable long-term energy storage on a grid scale. To advance the development of nonaqueous RFBs with high energy densities, a new organic RFB system employing a molecularly engineered tetrathiafulvalene derivative ((PEG3/PerF)-TTF) as a high energy density catholyte was developed. A synergistic approach to the molecular design of tetrathiafulvalene (TTF) was applied, with the incorporation of polyethylene glycol (PEG) chains, which enhance its solubility in organic carbonate electrolytes, and a perfluoro (PerF) group to increase its redox potential. When paired with a lithium metal anode, the two-electron-active (PEG3/PerF)-TTF catholyte produced a cell voltage of 3.56 V for the first redox process and 3.92 V for the second redox process. In cyclic voltammetry and flow cell tests, the redox chemistry exhibited excellent cycling stability. The Li|(PEG3/PerF)-TTF batteries, with concentrations of 0.1 M and 0.5 M, demonstrated capacity retention rates of ~94 % (99.87 % per cycle, 97.52 % per day) and 90 % (99.93 % per cycle, 99.16 % per day), and the average Coulombic efficiencies of 99.38 % and 98.35 %, respectively. The flow cell achieved a high power density of 129 mW/cm2. Furthermore, owing to the high redox potential and solubility of (PEG3/PerF)-TTF, the flow cell attained a high operational energy density of 72 Wh/L (100 Wh/L theoretical). A 0.75 M flow cell exhibited an even higher operational energy density of 96 Wh/L (150 Wh/L theoretical).

Molecular Cu Electrocatalyst Escalates Ambient Perfluorooctanoic Acid Degradation.

Groundwater reservoirs contaminated with perfluoroalkyl and polyfluoroalkyl substances (PFASs) need purifying remedies. Perfluorooctanoic acid (PFOA) is the most abundant PFAS in drinking water. Although different degradation strategies for PFOA have been explored, none of them disintegrates the PFOA backbone rapidly under mild conditions. Herein, we report a molecular copper electrocatalyst that assists in the degradation of PFOA up to 93% with a 99% defluorination rate within 4 h of cathodic controlled-current electrolysis. The current-normalized pseudo-first-order rate constant has been estimated to be quite high for PFOA decomposition (3.32 L h-1 A-1), indicating its fast degradation at room temperature. Furthermore, comparatively, rapid decarboxylation over the first 2 h of electrolysis has been suggested to be the rate-determining step in PFOA degradation. The related Gibbs free energy of activation has been calculated as 22.6 kcal/mol based on the experimental data. In addition, we did not observe the formation of short-alkyl-chain PFASs as byproducts that are typically found in chain-shortening PFAS degradation routes. Instead, free fluoride (F-), trifluoroacetate (CF3COO-), trifluoromethane (CF3H), and tetrafluoromethane (CF4) were detected as fragmented PFOA products along with the evolution of CO2 using gas chromatography (GC), ion chromatography (IC), and gas chromatography-mass spectrometry (GC-MS) techniques, suggesting comprehensive cleavage of C-C bonds in PFOA. Hence, this study presents an effective method for the rapid degradation of PFOA into small ions/molecules.

A novel framework integrating AI model and enzymological experiments promotes identification of SARS-CoV-2 3CL protease inhibitors and activity-based probe.

The identification of protein-ligand interaction plays a key role in biochemical research and drug discovery. Although deep learning has recently shown great promise in discovering new drugs, there remains a gap between deep learning-based and experimental approaches. Here, we propose a novel framework, named AIMEE, integrating AI model and enzymological experiments, to identify inhibitors against 3CL protease of SARS-CoV-2 (Severe acute respiratory syndrome coronavirus 2), which has taken a significant toll on people across the globe. From a bioactive chemical library, we have conducted two rounds of experiments and identified six novel inhibitors with a hit rate of 29.41%, and four of them showed an IC50 value <3 µM. Moreover, we explored the interpretability of the central model in AIMEE, mapping the deep learning extracted features to the domain knowledge of chemical properties. Based on this knowledge, a commercially available compound was selected and was proven to be an activity-based probe of 3CLpro. This work highlights the great potential of combining deep learning models and biochemical experiments for intelligent iteration and for expanding the boundaries of drug discovery. The code and data are available at https://github.com/SIAT-code/AIMEE.

Design and synthesis of photoaffinity-based probes for labeling ß-glucuronidase.

ß-Glucuronidase (GUSB) plays an important role in human physiological and pathological activities. The activity level of GUSB is closely related to human health and diseases. It is imperative to detect the activity of GUSB for related disease diagnosis and treatment. However, exactly evaluating the activity of GUSB in complicated biological system remains a challenge. In this study, we developed photoaffinity-based probes (AfBPs) equipped with photosensitive benzophenone group for labeling active GUSB. Through molecule docking, we predicted the binding model of the AfBPs and GUSB, and the obtained results suggested thermodynamically favorable binding. The AfBPs indicated high efficiency and showed dose-/time-dependent labeling of Escherichia coli (E. coli) GUSB. The application of AfBPs toward GUSB provides a powerful tool to study the activity of target enzymes and contributes to huge potential of enzyme inhibitor discovery and biomedical diagnostics.

Electrocatalytic Hydrogen Evolution Using A Molecular Antimony Complex under Aqueous Conditions: An Experimental and Computational Study on Main-Group Element Catalysis.

Electrocatalytic hydrogen gas production is considered a potential pathway towards carbon-neutral energy sources. However, the development of this technology is hindered by the lack of efficient, cost-effective, and environmentally benign catalysts. In this study, a main-group-element-based electrocatalyst, SbSalen, is reported to catalyze the hydrogen evolution reaction (HER) in an aqueous medium. The heterogenized molecular system achieved a Faradaic efficiency of 100 % at -1.4 V vs. NHE with a maximum current density of -30.7 mA/cm2 . X-ray photoelectron spectroscopy of the catalyst-bound working electrode before and after electrolysis confirmed the molecular stability during catalysis. The turnover frequency was calculated as 43.4 s-1 using redox-peak integration. The kinetic and mechanistic aspects of the electrocatalytic reaction were further examined by computational methods. This study provides mechanistic insights into main-group-element electrocatalysts for heterogeneous small-molecule conversion.

A PEGylated Tin Porphyrin Complex for Electrocatalytic Proton Reduction: Mechanistic Insights into Main-Group-Element Catalysis.

Electrocatalytic proton reduction to form dihydrogen (H2 ) is an effective way to store energy in the form of chemical bonds. In this study, we validate the applicability of a main-group-element-based tin porphyrin complex as an effective molecular electrocatalyst for proton reduction. A PEGylated Sn porphyrin complex (SnPEGP) displayed high activity (-4.6 mA cm-2 at -1.7 V vs. Fc/Fc+ ) and high selectivity (H2 Faradaic efficiency of 94 % at -1.7 V vs. Fc/Fc+ ) in acetonitrile (MeCN) with trifluoroacetic acid (TFA) as the proton source. The maximum turnover frequency (TOFmax ) for H2 production was obtained as 1099 s-1 . Spectroelectrochemical analysis, in conjunction with quantum chemical calculations, suggest that proton reduction occurs via an electron-chemical-electron-chemical (ECEC) pathway. This study reveals that the tin porphyrin catalyst serves as a novel platform for investigating molecular electrocatalytic reactions and provides new mechanistic insights into proton reduction.

Hydrodechlorination of Dichloromethane by a Metal-Free Triazole-Porphyrin Electrocatalyst: Demonstration of Main-Group Element Electrocatalysis*.

In this work, the electrocatalytic reduction of dichloromethane (CH2 Cl2 ) into hydrocarbons involving a main group element-based molecular triazole-porphyrin electrocatalyst H2PorT8 is reported. This catalyst converted CH2 Cl2 in acetonitrile to various hydrocarbons (methane, ethane, and ethylene) with a Faradaic efficiency of 70 % and current density of -13 mA cm-2 at a potential of -2.2 V vs. Fc/Fc+ using water as a proton source. The findings of this study and its mechanistic interpretations demonstrated that H2PorT8 was an efficient and stable catalyst for the hydrodechlorination of CH2 Cl2 and that main group catalysts could be potentially used for exploring new catalytic reaction mechanisms.

Bacteroides fragilis fucosidases facilitate growth and invasion of Campylobacter jejuni in the presence of mucins.

The enteropathogenic bacterium, Campylobacter jejuni, was considered to be non-saccharolytic, but recently it emerged that l-fucose plays a central role in C. jejuni virulence. Half of C. jejuni clinical isolates possess an operon for l-fucose utilisation. In the intestinal tract, l-fucose is abundantly available in mucin O-linked glycan structures, but C. jejuni lacks a fucosidase enzyme essential to release the l-fucose. We set out to determine how C. jejuni can gain access to these intestinal l-fucosides. Growth of the fuc + C. jejuni strains, 129,108 and NCTC 11168, increased in the presence of l-fucose while fucose permease knockout strains did not benefit from additional l-fucose. With fucosidase assays and an activity-based probe, we confirmed that Bacteriodes fragilis, an abundant member of the intestinal microbiota, secretes active fucosidases. In the presence of mucins, C. jejuni was dependent on B. fragilis fucosidase activity for increased growth. Campylobacter jejuni invaded Caco-2 intestinal cells that express complex O-linked glycan structures that contain l-fucose. In infection experiments, C. jejuni was more invasive in the presence of B. fragilis and this increase is due to fucosidase activity. We conclude that C. jejuni fuc + strains are dependent on exogenous fucosidases for increased growth and invasion.

Effects of Appended Poly(ethylene glycol) on Electrochemical CO2 Reduction by an Iron Porphyrin Complex.

Electrochemical carbon dioxide (CO2) reduction is a sustainable approach for transforming atmospheric CO2 into chemical feedstocks and fuels. To overcome the kinetic barriers of electrocatalytic CO2 reduction, catalysts with high selectivity, activity, and stability are needed. Here, we report an iron porphyrin complex, FePEGP, with a poly(ethylene glycol) unit in the second coordination sphere, as a highly selective and active electrocatalyst for the electrochemical reduction of CO2 to carbon monoxide (CO). Controlled-potential electrolysis using FePEGP showed a Faradaic efficiency of 98% and a current density of -7.8 mA/cm2 at -2.2 V versus Fc/Fc+ in acetonitrile using water as the proton source. The maximum turnover frequency was calculated to be 1.4 × 105 s-1 using foot-of-the-wave analysis. Distinct from most other catalysts, the kinetic isotope effect (KIE) study revealed that the protonation step of the Fe-CO2 adduct is not involved in the rate-limiting step. This model shows that the PEG unit as the secondary coordination sphere enhances the catalytic kinetics and thus is an effective design for electrocatalytic CO2 reduction.

Electrocatalytic Dechlorination of Dichloromethane in Water Using a Heterogenized Molecular Copper Complex.

The remediation of organohalides from water is a challenging process in environment protection and water treatment. Herein, we report a molecular copper(I) complex with two triazole units, CuT2, in a heterogeneous aqueous system that is capable of dechlorinating dichloromethane (CH2Cl2) to afford hydrocarbons (methane, ethane, and ethylene). The catalytic performance is evaluated in water and presented high Faradaic efficiency (average 70% CH4) across a range of potentials (-1.1 to -1.6 V vs Ag/AgCl) and high activity (maximum -25.1 mA/cm2 at -1.6 V vs Ag/AgCl) with a turnover number of 2.0 × 107. The CuT2 catalyst also showed excellent stability for 14 h of constant exposure to CH2Cl2 and 10 h of CH2Cl2 exposure cycling. The control compound, a copper-free triazole unit (T1), was also investigated under the same condition and showed inferior catalytic activity, indicating the importance of the copper center. Plausible catalytic mechanisms are proposed for the formation of C1 and C2 products via radical intermediates. Computational studies provided additional insight into the reaction mechanism and the selectivity toward the CH4 formation. The findings in this study demonstrate that complex CuT2 is an efficient and stable catalyst for the dehalogenation of CH2Cl2 and could potentially be used for the exploration of the removal of halogenated species from aqueous systems.

Isolation and identification of belamcandaoids A-N from Belamcanda chinensis seeds and their inhibition on extracellular matrix in TGF-ß1 induced kidney proximal tubular cells.

Belamcandaoids A-N (1-14), fourteen new triterpenoids were isolated from the seeds of Belamcanda chinensis. Their structures including absolute configurations were assigned by using spectroscopic, computational, and crystallographic methods. All the compounds except 1 and 2 are 3,4-seco-triterpenoids belonging to fernane type. Biological evaluation results indicated that 3 and 13 could reduce fibronectin and collagen I expression respectively in TGF-ß1 induced kidney proximal tubular cells.

Enhanced Electrocatalytic Activity of a Zinc Porphyrin for CO2 Reduction: Cooperative Effects of Triazole Units in the Second Coordination Sphere.

The control of the second coordination sphere in a coordination complex plays an important role in improving catalytic efficiency. Herein, we report a zinc porphyrin complex ZnPor8T with multiple flexible triazole units comprising the second coordination sphere, as an electrocatalyst for the highly selective electrochemical reduction of carbon dioxide (CO2 ) to carbon monoxide (CO). This electrocatalyst converted CO2 to CO with a Faradaic efficiency of 99 % and a current density of -6.2 mA cm-2 at -2.4 V vs. Fc/Fc+ in N,N-dimethylformamide using water as the proton source. Structure-function relationship studies were carried out on ZnPor8T analogs containing different numbers of triazole units and distinct triazole geometries; these unveiled that the triazole units function cooperatively to stabilize the CO2 -catalyst adduct in order to facilitate intramolecular proton transfer. Our findings demonstrate that incorporating triazole units that function in a cooperative manner is a versatile strategy to enhance the activity of electrocatalytic CO2 conversion.

Ultrathin dendrimer-graphene oxide composite film for stable cycling lithium-sulfur batteries.

Lithium-sulfur batteries (Li-S batteries) have attracted intense interest because of their high specific capacity and low cost, although they are still hindered by severe capacity loss upon cycling caused by the soluble lithium polysulfide intermediates. Although many structure innovations at the material and device levels have been explored for the ultimate goal of realizing long cycle life of Li-S batteries, it remains a major challenge to achieve stable cycling while avoiding energy and power density compromises caused by the introduction of significant dead weight/volume and increased electrochemical resistance. Here we introduce an ultrathin composite film consisting of naphthalimide-functionalized poly(amidoamine) dendrimers and graphene oxide nanosheets as a cycling stabilizer. Combining the dendrimer structure that can confine polysulfide intermediates chemically and physically together with the graphene oxide that renders the film robust and thin (<1% of the thickness of the active sulfur layer), the composite film is designed to enable stable cycling of sulfur cathodes without compromising the energy and power densities. Our sulfur electrodes coated with the composite film exhibit very good cycling stability, together with high sulfur content, large areal capacity, and improved power rate.

Multiplex Fluorescent, Activity-Based Protein Profiling Identifies Active α-Glycosidases and Other Hydrolases in Plants.

With nearly 140 α-glycosidases in 14 different families, plants are well equipped with enzymes that can break the α-glucosidic bonds in a large diversity of molecules. Here, we introduce activity-based protein profiling (ABPP) of α-glycosidases in plants using α-configured cyclophellitol aziridine probes carrying various fluorophores or biotin. In Arabidopsis (Arabidopsis thaliana), these probes label members of the GH31 family of glycosyl hydrolases, including endoplasmic reticulum-resident α-glucosidase-II Radial Swelling3/Priority for Sweet Life5 (RSW3/PSL5) and Golgi-resident α-mannosidase-II Hybrid Glycosylation1 (HGL1), both of which trim N-glycans on glycoproteins. We detected the active state of extracellular α-glycosidases such as α-xylosidase XYL1, which acts on xyloglucans in the cell wall to promote cell expansion, and α-glucosidase AGLU1, which acts in starch hydrolysis and can suppress fungal invasion. Labeling of α-glycosidases generates pH-dependent signals that can be suppressed by α-glycosidase inhibitors in a broad range of plant species. To demonstrate its use on a nonmodel plant species, we applied ABPP on saffron crocus (Crocus sativus), a cash crop for the production of saffron spice. Using a combination of biotinylated glycosidase probes, we identified and quantified 67 active glycosidases in saffron crocus stigma, of which 10 are differentially active. We also uncovered massive changes in hydrolase activities in the corms upon infection with Fusarium oxysporum using multiplex fluorescence labeling in combination with probes for serine hydrolases and cysteine proteases. These experiments demonstrate the ease with which active α-glycosidases and other hydrolases can be analyzed through ABPP in model and nonmodel plants.

Activity-based probes for functional interrogation of retaining ß-glucuronidases.

Humans express at least two distinct ß-glucuronidase enzymes that are involved in disease: exo-acting ß-glucuronidase (GUSB), whose deficiency gives rise to mucopolysaccharidosis type VII, and endo-acting heparanase (HPSE), whose overexpression is implicated in inflammation and cancers. The medical importance of these enzymes necessitates reliable methods to assay their activities in tissues. Herein, we present a set of ß-glucuronidase-specific activity-based probes (ABPs) that allow rapid and quantitative visualization of GUSB and HPSE in biological samples, providing a powerful tool for dissecting their activities in normal and disease states. Unexpectedly, we find that the supposedly inactive HPSE proenzyme proHPSE is also labeled by our ABPs, leading to surprising insights regarding structural relationships between proHPSE, mature HPSE, and their bacterial homologs. Our results demonstrate the application of ß-glucuronidase ABPs in tracking pathologically relevant enzymes and provide a case study of how ABP-driven approaches can lead to discovery of unanticipated structural and biochemical functionality.

Research on Improving the Electrochemical Performance of LiMn2O4 via Cr-Doping.

Cr was doped into LiMn2O4 compound in this study through the traditional solid-state reaction route. The pattern of X-ray diffraction (XRD) revealed that the structure of LiMn2O4 had not changed, and scanning electron microscopy (SEM) exhibited that all samples possessed similar morphology. It was seen that all the samples presented more than 100 mAh/g capacity under different discharge current rates. Because partial Mn3+ was replaced by Cr3+, the LiMn2-xCrxO4 revealed excellent cycling stability. Electrochemical result demonstrated that the optimal content of Cr-doping was 0.02, which had an initial discharged capacity of 133.9 mAh/g at 1C rate. These results suggest a new method for enhancing cycle stability of LiMn2O4 materials.

Antimony Complexes for Electrocatalysis: Activity of a Main-Group Element in Proton Reduction.

Main-group complexes are shown to be viable electrocatalysts for the H2 -evolution reaction (HER) from acid. A series of antimony porphyrins with varying axial ligands were synthesized for electrocatalysis applications. The proton-reduction catalytic properties of TPSb(OH)2 (TP=5,10,15,20-tetra(p-tolyl)porphyrin) with two axial hydroxy ligands were studied in detail, demonstrating catalytic H2 production. Experiments, in conjunction with quantum chemistry calculations, show that the catalytic cycle is driven via the redox activity of both the porphyrin ligand and the Sb center. This study brings insight into main group catalysis and the role of redox-active ligands during catalysis.

Self-Cleaning Catalyst Electrodes for Stabilized CO2 Reduction to Hydrocarbons.

A surface-restructuring strategy is presented that involves self-cleaning Cu catalyst electrodes with unprecedented catalytic stability toward CO2 reduction. Under the working conditions, the Pd atoms pre-deposited on Cu surface induce continuous morphological and compositional restructuring of the Cu surface, which constantly refreshes the catalyst surface and thus maintains the catalytic properties for CO2 reduction to hydrocarbons. The Pd-decorated Cu electrode can catalyze CO2 reduction with relatively stable selectivity and current density for up to 16 h, which is one of the best catalytic durability performances among all Cu electrocatalysts for effective CO2 conversion to hydrocarbons. The generality of this approach of utilizing foreign metal atoms to induce surface restructuring toward stabilizing Cu catalyst electrodes against deactivation by carbonaceous species accumulation in CO2 reduction is further demonstrated by replacing Pd with Rh.