Investigation of the impacts of simple electrolytes and hydrotrope on the interaction of ceftriaxone sodium with cetylpyridinium chloride at numerous study temperatures.

Herein, interactions between cetylpyridinium chloride (CPC) and ceftriaxone sodium (CTS) were investigated applying conductivity technique. Impacts of the nature of additives (e.g. electrolytes or hydrotrope (HDT)), change of temperatures (from 298.15 to 323.15 K), and concentration variation of CTS/additives were assessed on the micellization of CPC + CTS mixture. The conductometric analysis of critical micelle concentration (CMC) with respect to the concentration reveals that the CMC values were increased with the increase in CTS concentration. In terms of using different mediums, CMC did not differ much with the increase in electrolyte salt (NaCl, Na2SO4) concentration, but increased significantly with the rise of HDT (NaBenz) amount. In the presence of electrolyte, CMC showed a gentle increment with temperature, while the HDT showed the opposite trend. Obtained result was further correlated with conventional thermodynamic relationship, where standard Gibb's free energy change (ΔGmo), change of enthalpy (ΔHmo), and change of entropy (ΔSmo) were utilized to investigate. The ΔGmo values were negative for all the mixed systems studied indicating that the micellization process was spontaneous. Finally, the stability of micellization was studied by estimating the intrinsic enthalpy gain (ΔHmo,∗) and compensation temperature (Tc). Here, CPC + CTS mixed system showed more stability in Na2SO4 medium than the NaCl, while in NaBenz exhibited the lowest stability.

Aggregation phenomena and physico-chemical properties of tetradecyltrimethylammonium bromide and protein (bovine serum albumin) mixture: Influence of electrolytes and temperature.

It is important for biological, pharmaceutical, and cosmetic industries to understand how proteins and surfactants interact. Herein, the interaction of bovine serum albumin (BSA) with tetradecyltrimethylammonium bromide (TTAB) in different inorganic salts (KCl, K2SO4, K3PO4.H2O) has been explored through the conductivity measurement method at different temperatures (300.55 to 325.55 K) with a specific salt concentration and at a fixed temperature (310.55 K) using different salts concentrations. The extent of micelle ionization (α) and different thermodynamic parameters associated with BSA and TTAB mixtures in salt solutions were calculated. Evaluation of the magnitudes of ∆Hm0 and ∆Sm0 showed that the association was exothermic and primarily an enthalpy-operated process in all cases at lower contents of BSA, but the system became endothermic, and entropy driven in the presence of K3PO4.H2O at a relatively higher concentration of BSA. The enthalpy-entropy compensation variables were determined, which explained the types and nature of interactions between TTAB and BSA in salt media. Molecular docking analysis revealed that the main stabilizing factors in the BSA-TTAB complex are electrostatic and hydrophobic interactions. These findings aligned with the significant results obtained from the conductometry method regarding the nature and characteristics of binding forces observed between BSA and TTAB.

Interaction between gastric enzyme pepsin and tetradecyltrimethylammonium bromide in presence of sodium electrolytes: Exploration of micellization behavior.

Pepsin is a proteolytic enzyme used in the treatment of digestive disorders. In this study, we investigated the physicochemical properties of the tetradecyltrimethylammonium bromide (TTAB) and pepsin protein mixture in various sodium salt media within a temperature range of 300.55-320.55 K with 5 K intervals. The conductometric study of the TTAB+pepsin mixture revealed a reduction in the critical micelle concentration (CMC) in electrolyte media. The micellization of TTAB was delayed in the presence of pepsin. The CMC of the TTAB + pepsin mixture was found to depend on the concentrations of electrolytes and protein, as well as the temperature variations. The aggregation of the TTAB+pepsin mixture was hindered as a function of [pepsin] and increasing temperatures, while micellization was promoted in aqueous electrolyte solutions. The negative free energy changes (∆Gm0) indicated the spontaneous aggregation of the TTAB+pepsin mixture. Changes in enthalpy, entropy, molar heat capacities, transfer properties, and enthalpy-entropy compensation variables were calculated and illustrated rationally. The interaction forces between TTAB and pepsin protein in the experimental solvents were primarily hydrophobic and electrostatic (ion-dipole) in nature. An analysis of molecular docking revealed hydrophobic interactions as the main stabilizing forces in the TTAB-pepsin complex.

Physicochemical parameters and modes of interaction associated with the micelle formation of a mixture of tetradecyltrimethylammonium bromide and cefixime trihydrate: effects of hydrotropes and temperature.

The interaction between an antibiotic drug (cefixime trihydrate (CMT)) and a cationic surfactant (tetradecyltrimethylammonium bromide (TTAB)) was examined in the presence of both ionic and non-ionic hydrotropes (HTs) over the temperature range of 300.55 to 320.55 K. The values of the critical micelle concentration (CMC) of the TTAB + CMT mixture were experienced to have dwindled with an enhancement of the concentrations of resorcinol (ReSC), sodium benzoate (NaBz), sodium salicylate (NaS), while for the same system, a monotonically augmentation of CMC was observed in aq. 4-aminobenzoic acid (PABA) solution. A gradual increase in CMC, as a function of temperature, was also observed. The values of the degree of counterion binding (ß) for the TTAB + CMT mixture were experienced to be influenced by the concentrations of ReSC/NaBz/NaS/PABA and a change in temperature. The micellization process of TTAB + CMT was observed to be spontaneous (negative standard Gibbs free energy change (ΔG0m)) at all conditions studied. Also, the values of standard enthalpy change (ΔH0m) and entropy change (ΔS0m) were found negative and positive, respectively (with a few exceptions), for the test cases indicating an exothermic and enthalpy-entropy directed micellization process. The recommended interaction forces between the components in the micellar system are electrostatic and hydrophobic interactions. In this study, the values of ΔC0m were negative in aqueous NaBz, ReSC, and PABA media, and positive in case of NaS. An excellent compensation scenario between the enthalpy and entropy for the CMT + TTAB mixed system in the investigated HTs solutions is well defined in the current work.

Influences of NaCl and Na2SO4 on the Micellization Behavior of the Mixture of Cetylpyridinium Chloride + Polyvinyl Pyrrolidone at Several Temperatures.

Herein, the conductivity measurement technique is used to determine the interactions that may occur between polyvinyl pyrrolidone (PVP) polymer and cetylpyridinium chloride (CPC) surfactant in the presence of NaCl and Na2SO4 of fixed concentration at variable temperatures (298.15-323.15 K) with an interval of 5 K. In the absence or presence of salts, we observed three critical micelle concentrations (CMC) for the CPC + PVP mixture. In all situations, CMC1 values of CPC + PVP system were found to be higher in water than in attendance of salts (NaCl and Na2SO4). Temperature and additives have the tendency to affect counterion binding values. Various physico-chemical parameters were analyzed and demonstrated smoothly, including free energy (ΔG0m), enthalpy (ΔH0m) and entropy change (ΔS0m). The micellization process is achieved to be spontaneous based on the obtained negative ΔG0m values. The linearity of the ΔHmo and ΔSmo values is excellent. The intrinsic enthalpy gain (ΔH0*m) and compensation temperature (Tc) were calculated and discussed with logical points. Interactions of polymer hydrophobic chains or the polymer + surfactant associated with amphiphilic surface-active drugs can employ a strong impact on the behavior of the gels.

Reactions of triosmium and triruthenium clusters with 2-ethynylpyridine: new modes for alkyne C-C bond coupling and C-H bond activation.

The reaction of the trimetallic clusters [H2Os3(CO)10] and [Ru3(CO)10L2] (L = CO, MeCN) with 2-ethynylpyridine has been investigated. Treatment of [H2Os3(CO)10] with excess 2-ethynylpyridine affords [HOs3(CO)10(µ-C5H4NCH=CH)] (1), [HOs3(CO)9(µ3-C5H4NC[double bond, length as m-dash]CH2)] (2), [HOs3(CO)9(µ3-C5H4NC[double bond, length as m-dash]CCO2)] (3), and [HOs3(CO)10(µ-CH[double bond, length as m-dash]CHC5H4N)] (4) formed through either the direct addition of the Os-H bond across the C[triple bond, length as m-dash]C bond or acetylenic C-H bond activation of the 2-ethynylpyridine substrate. In contrast, the dominant pathway for the reaction between [Ru3(CO)12] and 2-ethynylpyridine is C-C bond coupling of the alkyne moiety to furnish the triruthenium clusters [Ru3(CO)7(µ-CO){µ3-C5H4NC[double bond, length as m-dash]CHC(C5H4N)[double bond, length as m-dash]CH}] (5) and [Ru3(CO)7(µ-CO){µ3-C5H4NCCHC(C5H4N)CHCHC(C5H4N)}] (6). Cluster 5 contains a metalated 2-pyridyl-substituted diene while 6 exhibits a metalated 2-pyridyl-substituted triene moiety. The functionalized pyridyl ligands in 5 and 6 derive via the formal C-C bond coupling of two and three 2-ethynylpyridine molecules, respectively, and 5 and 6 provide evidence for facile alkyne insertion at ruthenium clusters. The solid-state structures of 1-3, 5, and 6 have been determined by single-crystal X-ray diffraction analyses, and the bonding in the product clusters has been investigated by DFT. In the case of 1, the computational results reveal a rare thermodynamic preference for a terminal hydride ligand as opposed to a hydride-bridged Os-Os bond (3c,2e Os-Os-H bond).

A new synthetic route for the preparation of [Os3(CO)10(µ-OH)(µ-H)] and its reaction with bis(diphenylphosphino)methane (dppm): syntheses and X-ray structures of two isomers of [Os3(CO)8(µ-OH)(µ-H)(µ-dppm)] and [Os3(CO)7(µ3-CO)(µ3-O)(µ-dppm)].

The triosmium cluster [Os3(CO)10(µ-OH)(µ-H)] containing bridging hydride and hydroxyl groups at a common Os-Os edge was obtained in good yield (ca. 75%) from the hydrolysis of the labile triosmium cluster [Os3(CO)10(NCMe)2] in THF at 67 °C. [Os3(CO)10(µ-OH)(µ-H)] reacts with dppm at 68 °C to afford the isomeric clusters 1 and 2 with the general formula [Os3(CO)8(µ-OH)(µ-H)(µ-dppm)] that differ by the disposition of bridging dppm ligand. Cluster 1 is produced exclusively from the reaction of [Os3(CO)10(µ-OH)(µ-H)] with dppm in CH2Cl2 at room temperature in the presence of added Me3NO. Heating cluster 1 at 81 °C furnishes 2 in a process that likely proceeds by the release of one arm of the dppm ligand, followed by ligand reorganization about the cluster polyhedron and ring closure of the pendent dppm ligand. The oxo-capped [Os3(CO)7(µ3-CO)(µ3-O)(µ-dppm)] (3) has been isolated starting from the thermolysis of either 1 or 2 at 139 °C. Reactions of [Os3(CO)10(µ-dppm)] with ROH (R = Me, Et) in the presence of Me3NO at 80 °C furnish [Os3(CO)8(µ-OH)(µ,η1,κ1-OCOR)(µ-dppm)] (4, R = Me; 5, R = Et). Clusters 1-5 have been characterized by a combination of analytical and spectroscopic studies, and the molecular structure of each product has been established by X-ray crystallography. The bonding in these products has been examined by electronic structure calculations, and cluster 1 is confirmed as the kinetic product of substitution, while cluster 2 represents the thermodynamically favored isomer.