Versatile Redox-Active Organic Materials for Rechargeable Energy Storage.

With the ever-increasing demand on energy storage systems and subsequent mass production, there is an urgent need for the development of batteries with not only improved electrochemical performance but also better sustainability-related features such as environmental friendliness and low production cost. To date, transition metals that are sparse have been centrally employed in energy storage devices ranging from portable lithium ion batteries (e.g., cobalt and nickel) to large-scale redox flow batteries (e.g., vanadium). Toward the sustainable battery chemistry, there are ongoing efforts to replace the transition metal-based electrode materials in these systems to redox-active organic materials (ROMs). Most ROMs are composed of the earth abundant elements (e.g., carbon, nitrogen, oxygen, sulfur), thus are less restrained by the resource, and their production does not require high-energy consuming processes. Furthermore, the structural diversity and chemical tunability of organic compounds make them more attractive for the versatile design of future energy storage systems. Accordingly, the timely development of high-performance ROM-based electrodes would expedite the shift from the current resource-limited battery chemistry to more sustainable energy solutions.In this Account, we provide an overview of the endeavors to employ and develop ROMs as high-performance active materials for various battery systems. Diverse approaches will be introduced starting from the new ROM design mimicking the energy carrying molecules in biological metabolism to the chemical modifications to tailor the properties for specific battery systems. The molecular redesign of ROM, for example, can be carried out by substituting heteroatoms in the redox center, which leads to the enhancement of the redox potential by the inductive effect. Or, tailoring the ROM molecule by removing redox-inactive functionals results in a reduced molecular weight, thereby an increased specific capacity. The intrinsic limitations of ROMs, such as the low electrical conductivity and the dissolving nature, have been under extensive scrutiny; however, they can be partly addressed through efforts including intermolecular fusion and/or nanoscale hybridization with a conducting scaffold. On the other hand, this problematic dissolving nature of ROMs makes them appealing for some new battery configurations such as redox flow batteries that employ the liquid-state active materials. The high solubility and the stability of the ROM were found to be beneficial in attaining the enhanced energy density and the cycle stability of flow batteries, which could be further optimized by the chemical modifications of ROMs. Besides the role of active materials, the redox activity of ROMs has also enabled their use as catalysts to promote the electrode reaction in metal-air batteries. The redox capability of the ROM was often proven to be effective in the solution-based redox mediation that facilitates both the charging and discharging reaction in metal-air batteries. Finally, we conclude this account by proposing the future research directions regarding the fundamental electrochemistry and the further practical development of ROMs for the sustainable rechargeable energy storage.

Predictors of Default from Treatment for Tuberculosis: a Single Center Case-Control Study in Korea.

Default from tuberculosis (TB) treatment could exacerbate the disease and result in the emergence of drug resistance. This study identified the risk factors for default from TB treatment in Korea. This single-center case-control study analyzed 46 default cases and 100 controls. Default was defined as interrupting treatment for 2 or more consecutive months. The reasons for default were mainly incorrect perception or information about TB (41.3%) and experience of adverse events due to TB drugs (41.3%). In univariate analysis, low income (< 2,000 US dollars/month, 88.1% vs. 68.4%, P = 0.015), absence of TB stigma (4.3% vs. 61.3%, P < 0.001), treatment by a non-pulmonologist (74.1% vs. 25.9%, P < 0.001), history of previous treatment (37.0% vs. 19.0%, P = 0.019), former defaulter (15.2% vs. 2.0%, P = 0.005), and combined extrapulmonary TB (54.3% vs. 34.0%, P = 0.020) were significant risk factors for default. In multivariate analysis, the absence of TB stigma (adjusted odd ratio [aOR]: 46.299, 95% confidence interval [CI]: 8.078-265.365, P < 0.001), treatment by a non-pulmonologist (aOR: 14.567, 95% CI: 3.260-65.089, P < 0.001), former defaulters (aOR: 33.226, 95% CI: 2.658-415.309, P = 0.007), and low income (aOR: 5.246, 95% CI: 1.249-22.029, P = 0.024) were independent predictors of default from TB treatment. In conclusion, patients with absence of disease stigma, treated by a non-pulmonologist, who were former defaulters, and with low income should be carefully monitored during TB treatment in Korea to avoid treatment default.

Shear Thickening Fluid and Sponge-Hybrid Triboelectric Nanogenerator for a Motion Sensor Array-Based Lying State Detection System.

Issues of size and power consumption in IoT devices can be addressed through triboelectricity-driven energy harvesting technology, which generates electrical signals without external power sources or batteries. This technology significantly reduces the complexity of devices, enhances installation flexibility, and minimizes power consumption. By utilizing shear thickening fluid (STF), which exhibits variable viscosity upon external impact, the sensitivity of triboelectric nanogenerator (TENG)-based sensors can be adjusted. For this study, the highest electrical outputs of STF and sponge-hybrid TENG (SSH-TENG) devices under various input forces and frequencies were generated with an open-circuit voltage (VOC) of 98 V and a short-circuit current (ISC) of 4.5 µA. The maximum power density was confirmed to be 0.853 mW/m2 at a load resistance of 30 MΩ. Additionally, a lying state detection system for use in medical settings was implemented using SSH-TENG as a hybrid triboelectric motion sensor (HTMS). Each unit of a 3 × 2 HTMS array, connected to a half-wave rectifier and 1 MΩ parallel resistor, was interfaced with an MCU. Real-time detection of the patient's condition through the HTMS array could enable the early identification of hazardous situations and alerts. The proposed HTMS continuously monitors the patient's movements, promptly identifying areas prone to pressure ulcers, thus effectively contributing to pressure ulcer prevention.

A practical approach to Sasang constitutional diagnosis using vocal features.

BACKGROUND: Sasang constitutional medicine (SCM) is a type of tailored medicine that divides human beings into four Sasang constitutional (SC) types. Diagnosis of SC types is crucial to proper treatment in SCM. Voice characteristics have been used as an essential clue for diagnosing SC types. In the past, many studies tried to extract quantitative vocal features to make diagnosis models; however, these studies were flawed by limited data collected from one or a few sites, long recording time, and low accuracy. We propose a practical diagnosis model having only a few variables, which decreases model complexity. This in turn, makes our model appropriate for clinical applications. METHODS: A total of 2,341 participants' voice recordings were used in making a SC classification model and to test the generalization ability of the model. Although the voice data consisted of five vowels and two repeated sentences per participant, we used only the sentence part for our study. A total of 21 features were extracted, and an advanced feature selection method-the least absolute shrinkage and selection operator (LASSO)-was applied to reduce the number of variables for classifier learning. A SC classification model was developed using multinomial logistic regression via LASSO. RESULTS: We compared the proposed classification model to the previous study, which used both sentences and five vowels from the same patient's group. The classification accuracies for the test set were 47.9% and 40.4% for male and female, respectively. Our result showed that the proposed method was superior to the previous study in that it required shorter voice recordings, is more applicable to practical use, and had better generalization performance. CONCLUSIONS: We proposed a practical SC classification method and showed that our model having fewer variables outperformed the model having many variables in the generalization test. We attempted to reduce the number of variables in two ways: 1) the initial number of candidate features was decreased by considering shorter voice recording, and 2) LASSO was introduced for reducing model complexity. The proposed method is suitable for an actual clinical environment. Moreover, we expect it to yield more stable results because of the model's simplicity.

FeV LDH Coated on Sandpaper as an Electrode Material for High-Performance Flexible Energy Storage Devices.

Recently, considerable research efforts to achieve advanced design of promising electroactive materials as well as unique structures in supercapacitor electrodes have been explored for high-performance energy storage systems. We suggest the development of novel electroactive materials with an enlarged surface area for sandpaper materials. Based on the inherent micro-structured morphologies of the sandpaper substrate, nano-structured Fe-V electroactive material can be coated on it by facile electrochemical deposition technique. A hierarchically designed electroactive surface is covered with FeV-layered double hydroxide (LDH) nano-flakes on Ni-sputtered sandpaper as a unique structural and compositional material. The successful growth of FeV-LDH is clearly revealed by surface analysis techniques. Further, electrochemical studies of the suggested electrodes are carried out to optimize the Fe-V composition as well as the grit number of the sandpaper substrate. Herein, optimized Fe0.75V0.25 LDHs coated on #15000 grit Ni-sputtered sandpaper are developed as advanced battery-type electrodes. Finally, along with the negative electrode of activated carbon and the FeV-LDH electrode, it is utilized for hybrid supercapacitor (HSC) assembly. The fabricated flexible HSC device indicates high energy and power density by showing excellent rate capability. This study is a remarkable approach to improving the electrochemical performance of energy storage devices using facile synthesis.

Study of a vocal feature selection method and vocal properties for discriminating four constitution types.

The voice has been used to classify the four constitution types, and to recognize a subject's health condition by extracting meaningful physical quantities, in traditional Korean medicine. In this paper, we propose a method of selecting the reliable variables from various voice features, such as frequency derivative features, frequency band ratios, and intensity, from vowels and a sentence. Further, we suggest a process to extract independent variables by eliminating explanatory variables and reducing their correlation and remove outlying data to enable reliable discriminant analysis. Moreover, the suitable division of data for analysis, according to the gender and age of subjects, is discussed. Finally, the vocal features are applied to a discriminant analysis to classify each constitution type. This method of voice classification can be widely used in the u-Healthcare system of personalized medicine and for improving diagnostic accuracy.

Biological Influence of Pulmonary Disease Conditions Induced by Particulate Matter on Microfluidic Lung Chips.

Particulate matter (PM10)-induced respiratory illnesses are difficult to investigate in trans-well culture systems. Microphysiological systems offer the capacity to mimic these phenomena to analyze any possible hazards that PM10 exposure poses to respiratory system of Humans. This study proposes an on-chip healthy human lung distal airway model that efficiently reconstitutes in vivo-like environmental conditions in a microfluidic device. The lung-on-chip model comprises a TEER sensor chip and portable microscope for continuous monitoring. To determine the efficacy of our model, we assessed the response to exposure to three PM environmental conditions (mild, average, and severe) and analyzed the relevant in vivo physiological and toxicological data using the airway model. Our results revealed significant increases in the levels of the IL-13, IL-6, and MUC5AC pathological biomarkers, which indicate increased incidences of on-chip asthma and chronic obstructive pulmonary disease conditions. Overall, we deduced that this model will facilitate the identification of potential therapeutics and the prevention of chronic life-threatening toxicities and pandemics such as COVID-19. The proposed system provides basic data for producing an improved in organ-on-chip technology. Supplementary Information: The online version contains supplementary material available at 10.1007/s13206-022-00068-x.

Electrospun Nanofiber Covered Polystyrene Micro-Nano Hybrid Structures for Triboelectric Nanogenerator and Supercapacitor.

Recently, tremendous research on small energy supply devices is gaining popularity with the immerging Internet of Things (IoT) technologies. Especially, energy conversion and storage devices can provide opportunities for small electronics. In this research, a micro-nano structured design of electrodes is newly developed for high performing hybrid energy systems with the improved effective surface area. Further, it could be simply fabricated through two-steps synthesis of electrospinning and glass transition of a novel polystyrene (PS) substrate. Herein, the electro-spun nanofiber of polyacrylonitrile (PAN) and Nylon 66 (Nylon) are applied to the dielectric layer of a triboelectric generator (TENG), while the PAN and polyaniline (PANI) composites is utilized as an electroactive material of supercapacitor (SC). As a result, the self-charging power system is successfully integrated with the wrinkled PAN/PS (W-PAN/PS@PANI)-SC and W-TENG by using a rectifier. According to the fabricated hybrid energy systems, the electrical energy produced by W-TENG can be successfully stored into as-fabricated W-PAN/PS@PANI-SC and can also turn on a commercial green LED with the stored energy. Therefore, the micro-nano structured electrode designed for hybrid energy systems can contribute to improve the energy conversion and storage performance of various electronic devices.

Influence of the N2 partial pressure on the characteristics of CrZrN coatings synthesized Using a segment CrZr target.

In this study, CrZrN films were synthesized by unbalanced magnetron sputtering (UBM) under various N2 partial pressures and their characteristics such as crystalline structure, surface morphology, microstructure and mechanical properties as a function of the N2 partial pressures were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), nanoindentation, wear tests, and corrosion tests. Results revealed that, with increasing the N2 partial pressure from 0.05 to 0.21 Pa, the nitrogen content of the films increased from approximately 40.9 to 53.7 at%, the deposition rate decreased from approximately 100 to 59 nm/min and the surface roughness (Rms value) was increased from approximately 0.57 to 1.79 nm. The Cr37.3-Zr9.0-N53.7 film has the highest hardness, elastic modulus, and plastic deformation resistance of 36 GPa, 380 GPa, and 0.41, respectively. The Cr37.3-Zr9.0-N53.7 film also has the lowest friction coefficient and wear rate of 0.19 and 3.01 (10(-6)m3/Nm) at room temperature. In addition, the potentiodynamic test results showed the corrosion resistance of the CrZrN films became increased significantly and their corrosion current density (i(corr)), corrosion potentials (Ecorr) and corrosion rate decreased with increasing N2 partial pressure.

Novel Conductive Ag-Decorated NiFe Mixed Metal Telluride Hierarchical Nanorods for High-Performance Hybrid Supercapacitors.

Mixed metal chalcogenide nanoarchitectures have been attracting enormous attention as battery-type electrodes for hybrid supercapacitors (HSCs) owing to their enhanced electrochemical (EC) performance. Despite having high electrical conductivity and good EC properties, tellurium has not been fully utilized in metal chalcogenide electrodes as much as sulfur and selenium. Herein, a facile strategy for the fabrication of nickel and iron (NiFe) mixed metal telluride hierarchical nanorods (MMT HNRs) on nickel foam (NF) is proposed. Furthermore, conductive silver (Ag) is decorated on MMT HNRs (AMMT HNRs) to improve the conducting channels, thereby EC performance. Benefitting from the combined advantages of electroactive NiFe mixed metal, conductive tellurium and Ag, and hierarchical nanorod-like nanomorphology, the AMMT HNR electrode has delivered high areal capacity (1.1 mAh cm-2). Finally, the AMMT based HSC with activated carbon coated NF (AC/NF) as a negative electrode exhibited the highest areal capacitance (1176.5 mF cm-2) with high areal energy density (0.669 mWh cm-2) and power density (64 mW cm-2). Moreover, the HSC device has maintained good cycling stability (86% capacity retention) even after 5000 cycles. New findings of this study definitely shed light on the development of telluride-based mixed metal chalcogenide supercapacitors.

Preparation of NiO decorated CNT/ZnO core-shell hybrid nanocomposites with the aid of ultrasonication for enhancing the performance of hybrid supercapacitors.

Supercapacitor (SC) electrodes fabricated with the combination of carbon nanotubes (CNTs) and metal oxides are showing remarkable advancements in the electrochemical properties. Herein, NiO decorated CNT/ZnO core-shell hybrid nanocomposites (CNT/ZnO/NiO HNCs) are facilely synthesized by a two-step solution-based technique for the utilization in hybrid supercapacitors. Benefitting from the synergistic advantages of three materials, the CNT/ZnO/NiO HNCs based electrode has evinced superior areal capacity of ~67 µAh cm-2 at a current density of 3 mA cm-2 with an exceptional cycling stability of 112% even after 3000 cycles of continuous operation. Highly conductive CNTs and electrochemically active ZnO contribute to the performance enhancement. Moreover, the decoration of NiO on the surface of CNT/ZnO core-shell increases the electro active sites and stimulates the faster redox reactions which play a vital role in augmenting the electrochemical properties. Making the use of high areal capacity and ultra-long stability, a hybrid supercapacitor (HSC) was assembled with CNT/ZnO/NiO HNCs coated nickel foam (CNT/ZnO/NiO HNCs/NF) as positive electrode and CNTs coated NF as negative electrode. The fabricated HSC delivered an areal capacitance of 287 mF cm-2 with high areal energy density (67 µWh cm-2) and power density (16.25 mW cm-2). The combination of battery type CNT/ZnO/NiO HNCs/NF and EDLC type CNT/NF helped in holding the capacity for a long period of time. Thus, the systematic assembly of CNTs and ZnO along with the NiO decoration enlarges the application window with its high rate electrochemical properties.

Sidewall Slope Control of InP Via Holes for 3D Integration.

This is the first demonstration of sidewall slope control of InP via holes with an etch depth of more than 10 µm for 3D integration. The process for the InP via holes utilizes a common SiO2 layer as an InP etch mask and conventional inductively coupled plasma (ICP) etcher operated at room temperature and simple gas mixtures of Cl2/Ar for InP dry etch. Sidewall slope of InP via holes is controlled within the range of 80 to 90 degrees by changing the ICP power in the ICP etcher and adopting a dry-etched SiO2 layer with a sidewall slope of 70 degrees. Furthermore, the sidewall slope control of the InP via holes in a wide range of 36 to 69 degrees is possible by changing the RF power in the etcher and introducing a wet-etched SiO2 layer with a small sidewall slope of 2 degrees; this wide slope control is due to the change of InP-to-SiO2 selectivity with RF power.

Gravity-Based Flow Efficient Perfusion Culture System for Spheroids Mimicking Liver Inflammation.

The spheroid culture system provides an efficient method to emulate organ-specific pathophysiology, overcoming the traditional two-dimensional (2D) cell culture limitations. The intervention of microfluidics in the spheroid culture platform has the potential to enhance the capacity of in vitro microphysiological tissues for disease modeling. Conventionally, spheroid culture is carried out in static conditions, making the media nutrient-deficient around the spheroid periphery. The current approach tries to enhance the capacity of the spheroid culture platform by integrating the perfusion channel for dynamic culture conditions. A pro-inflammatory hepatic model was emulated using a coculture of HepG2 cell line, fibroblasts, and endothelial cells for validating the spheroid culture plate with a perfusable channel across the spheroid well. Enhanced proliferation and metabolic capacity of the microphysiological model were observed and further validated by metabolic assays. A comparative analysis of static and dynamic conditions validated the advantage of spheroid culture with dynamic media flow. Hepatic spheroids were found to have improved proliferation in dynamic flow conditions as compared to the static culture platform. The perfusable culture system for spheroids is more physiologically relevant as compared to the static spheroid culture system for disease and drug analysis.

Multiplex PCR-Based Nanopore Sequencing and Epidemiological Surveillance of Hantaan orthohantavirus in Apodemus agrarius, Republic of Korea.

Whole-genome sequencing of infectious agents enables the identification and characterization of emerging viruses. The MinION device is a portable sequencer that allows real-time sequencing in fields or hospitals. Hantaan orthohantavirus (Hantaan virus, HTNV), harbored by Apodemus agrarius, causes hemorrhagic fever with renal syndrome (HFRS) and poses a critical public health threat worldwide. In this study, we aimed to evaluate the feasibility of using nanopore sequencing for whole-genome sequencing of HTNV from samples having different viral copy numbers. Amplicon-based next-generation sequencing was performed in A. agrarius lung tissues collected from the Republic of Korea. Genomic sequences of HTNV were analyzed based on the viral RNA copy numbers. Amplicon-based nanopore sequencing provided nearly full-length genomic sequences of HTNV and showed sufficient read depth for phylogenetic analysis after 8 h of sequencing. The average identity of the HTNV genome sequences for the nanopore sequencer compared to those of generated from Illumina MiSeq revealed 99.8% (L and M segments) and 99.7% (S segment) identities, respectively. This study highlights the potential of the portable nanopore sequencer for rapid generation of accurate genomic sequences of HTNV for quicker decision making in point-of-care testing of HFRS patients during a hantavirus outbreak.

Evaluation of performance characteristics of portal monitor for radiation emergency.

For evaluating the counting efficiency of a portal monitor, we use a137Cs radiation point source (1 µCi) to subsequently establish it effective measurable area. Through simulation, we estimate the appropriate distance from potentially contaminated individuals in the scanning queue to the monitoring individual. When this distance is over 10 m, the counting efficiency was below 0.01%. We find that the triage can be applied to roughly 180 individuals per hour during mass casualties.

Phylogeographic diversity and hybrid zone of Hantaan orthohantavirus collected in Gangwon Province, Republic of Korea.

BACKGROUND: Hantaan orthohantavirus (Hantaan virus, HTNV), harbored by Apodemus agrarius (the striped field mouse), causes hemorrhagic fever with renal syndrome (HFRS) in humans. Viral genome-based surveillance at new expansion sites to identify HFRS risks plays a critical role in tracking the infection source of orthohantavirus outbreak. In the Republic of Korea (ROK), most studies demonstrated the serological prevalence and genetic diversity of orthohantaviruses collected from HFRS patients or rodents in Gyeonggi Province. Gangwon Province is a HFRS-endemic area with a high incidence of patients and prevalence of infected rodents, ROK. However, the continued epidemiology and surveillance of orthohantavirus remain to be investigated. METHODOLOGY/PRINCIPAL FINDINGS: Whole-genome sequencing of HTNV was accomplished in small mammals collected in Gangwon Province during 2015-2018 by multiplex PCR-based next-generation sequencing. To elucidate the geographic distribution and molecular diversity of viruses, we conducted phylogenetic analyses of HTNV tripartite genomes. We inferred the hybrid zone using cline analysis to estimate the geographic contact between two different HTNV lineages in the ROK. The graph incompatibility based reassortment finder performed reassortment analysis. A total of 12 HTNV genome sequences were completely obtained from A. agrarius newly collected in Gangwon Province. The phylogenetic and cline analyses demonstrated the genetic diversity and hybrid zone of HTNV in the ROK. Genetic exchange analysis suggested the possibility of reassortments in Cheorwon-gun, a highly HFRS-endemic area. CONCLUSIONS/SIGNIFICANCE: The prevalence and distribution of HTNV in HFRS-endemic areas of Gangwon Province enhanced the phylogeographic map for orthohantavirus outbreak monitoring in ROK. This study revealed the hybrid zone reflecting the genetic diversity and evolutionary dynamics of HTNV circulating in Gangwon Province. The results arise awareness of rodent-borne orthohantavirus diseases for physicians in the endemic area of ROK.

Analysis of Research on Nurses' Job Stress Using Network Analysis.

This study established a network related to nurses' job stress by conducting a social network analysis of titles, keywords, and abstracts, and it identified emerging topics of research. NetMiner 4.0 visualized an interconnection between critical keywords and investigated their frequency of appearance to construe the trends in nurses' job stress measures used in studies conducted over 55 years (1960-2015). Text Rank Analyzer examined a collection of 9,218 keywords from 2,662 studies. The analysis revealed four groups of newly emerging keywords in the research. The following five clusters were identified: concept, subject, method and tool, outcome and response, and solution and management. Thus, if new researchers refer to existing trends to establish the subject of their study, replication studies can be reduced, and the direction of the development of future research on nurses' job stress can be predicted. Further application of new interventions, development of objective indicators, working environment, and broader participants are needed.

Impact of Buffer Layer Process and Na on Shunt Paths of Monolithic Series-connected CIGSSe Thin Film Solar Cells.

The illuminated current-voltage characteristics of Cu(In,Ga)(S,Se)2 (CIGSSe) thin film solar cells fabricated using two different buffer layer processes: chemical bath deposition (CBD) and atomic layer deposition (ALD) were investigated. The CIGSSe solar cell with the ALD buffer showed comparable conversion efficiency to the CIGSSe solar cell with CBD buffer but lower shunt resistance even though it showed lower point shunt defect density as measured in electroluminescence. The shunt paths were investigated in detail by capturing the high-resolution dark lock-in thermography images, resolving the shunt resistance contributions of the scribing patterns (P1, P3), and depth profiling of the constituent elements. It was found that the concentration of Na from the soda-lime glass substrate played a key role in controlling the shunt paths. In the ALD process, Na segregated at the surface of CIGSSe and contributed to the increase in the shunt current through P1 and P3, resulting in a reduction in the fill factor of the CIGSSe solar cells.

Interfacial Engineering for the Synergistic Enhancement of Thermal Conductivity of Discotic Liquid Crystal Composites.

To develop an advanced heat transfer composite, a deeper understanding of the interfacial correlation between matrix and filler is of paramount importance. To verify the effect of interfacial correlations on the thermal conductivity, the conductive fillers such as expanded graphite (EG) and boron nitride (BN) are introduced in the discotic liquid crystal (DLC)-based polymeric matrix. The DLC matrix exhibits better interfacial affinity with EG compared to BN because of the strong π-π interactions between EG and DLC. Thanks to its excellent interfacial affinity, the EG-DLC composites show a synergistic increment in thermal conducting performance.

Optically Patternable Metamaterial Below Diffraction Limit.

We report an optically patternable metamaterial (OPM) for ultraviolet nanolithography below the diffraction limit. The OPM features monolayered silver nanoislands embedded within a photosensitive polymer by using spin-coating of an ultrathin polymer, oblique angle deposition, and solid-state embedment of silver nanoislands. This unique configuration simultaneously exhibits both negative effective permittivity and high image contrast in the ultraviolet range, which enables the surface plasmon excitation for the clear photolithographic definition of minimum feature size of 70 nm (≲ λ/5) beyond the near-field zone. This new metamaterial provides a new class of photoresist for ultraviolet nanolithography below the diffraction limit.