Fast Near Ab Initio Potential Energy Surfaces Using Machine Learning.

A machine-learning based approach for evaluating potential energies for quantum mechanical studies of properties of the ground and excited vibrational states of small molecules is developed. This approach uses the molecular-orbital-based machine learning (MOB-ML) method to generate electronic energies with the accuracy of CCSD(T) calculations at the same cost as a Hartree-Fock calculation. To further reduce the computational cost of the potential energy evaluations without sacrificing the CCSD(T) level accuracy, GPU-accelerated Neural Network Potential Energy Surfaces (NN-PES) are trained to geometries and energies that are collected from small-scale Diffusion Monte Carlo (DMC) simulations, which are run using energies evaluated using the MOB-ML model. The combined NN+(MOB-ML) approach is used in variational calculations of the ground and low-lying vibrational excited states of water and in DMC calculations of the ground states of water, CH5+, and its deuterated analogues. For both of these molecules, comparisons are made to the results obtained using potentials that were fit to much larger sets of electronic energies than were required to train the MOB-ML models. The NN+(MOB-ML) approach is also used to obtain a potential surface for C2H5+, which is a carbocation with a nonclassical equilibrium structure for which there is currently no available potential surface. This potential is used to explore the CH stretching vibrations, focusing on those of the bridging hydrogen atom. For both CH5+ and C2H5+ the MOB-ML model is trained using geometries that were sampled from an AIMD trajectory, which was run at 350 K. By comparison, the structures sampled in the ground state calculations can have energies that are as much as ten times larger than those used to train the MOB-ML model. For water a higher temperature AIMD trajectory is needed to obtain accurate results due to the smaller thermal energy. A second MOB-ML model for C2H5+ was developed with additional higher energy structures in the training set. The two models are found to provide nearly identical descriptions of the ground state of C2H5+.

Analytical gradients for molecular-orbital-based machine learning.

Molecular-orbital-based machine learning (MOB-ML) enables the prediction of accurate correlation energies at the cost of obtaining molecular orbitals. Here, we present the derivation, implementation, and numerical demonstration of MOB-ML analytical nuclear gradients, which are formulated in a general Lagrangian framework to enforce orthogonality, localization, and Brillouin constraints on the molecular orbitals. The MOB-ML gradient framework is general with respect to the regression technique (e.g., Gaussian process regression or neural networks) and the MOB feature design. We show that MOB-ML gradients are highly accurate compared to other ML methods on the ISO17 dataset while only being trained on energies for hundreds of molecules compared to energies and gradients for hundreds of thousands of molecules for the other ML methods. The MOB-ML gradients are also shown to yield accurate optimized structures at a computational cost for the gradient evaluation that is comparable to a density-corrected density functional theory calculation.

Improved accuracy and transferability of molecular-orbital-based machine learning: Organics, transition-metal complexes, non-covalent interactions, and transition states.

Molecular-orbital-based machine learning (MOB-ML) provides a general framework for the prediction of accurate correlation energies at the cost of obtaining molecular orbitals. The application of Nesbet's theorem makes it possible to recast a typical extrapolation task, training on correlation energies for small molecules and predicting correlation energies for large molecules, into an interpolation task based on the properties of orbital pairs. We demonstrate the importance of preserving physical constraints, including invariance conditions and size consistency, when generating the input for the machine learning model. Numerical improvements are demonstrated for different datasets covering total and relative energies for thermally accessible organic and transition-metal containing molecules, non-covalent interactions, and transition-state energies. MOB-ML requires training data from only 1% of the QM7b-T dataset (i.e., only 70 organic molecules with seven and fewer heavy atoms) to predict the total energy of the remaining 99% of this dataset with sub-kcal/mol accuracy. This MOB-ML model is significantly more accurate than other methods when transferred to a dataset comprising of 13 heavy atom molecules, exhibiting no loss of accuracy on a size intensive (i.e., per-electron) basis. It is shown that MOB-ML also works well for extrapolating to transition-state structures, predicting the barrier region for malonaldehyde intramolecular proton-transfer to within 0.35 kcal/mol when only trained on reactant/product-like structures. Finally, the use of the Gaussian process variance enables an active learning strategy for extending the MOB-ML model to new regions of chemical space with minimal effort. We demonstrate this active learning strategy by extending a QM7b-T model to describe non-covalent interactions in the protein backbone-backbone interaction dataset to an accuracy of 0.28 kcal/mol.

Quantum Chemistry Common Driver and Databases (QCDB) and Quantum Chemistry Engine (QCEngine): Automation and interoperability among computational chemistry programs.

Community efforts in the computational molecular sciences (CMS) are evolving toward modular, open, and interoperable interfaces that work with existing community codes to provide more functionality and composability than could be achieved with a single program. The Quantum Chemistry Common Driver and Databases (QCDB) project provides such capability through an application programming interface (API) that facilitates interoperability across multiple quantum chemistry software packages. In tandem with the Molecular Sciences Software Institute and their Quantum Chemistry Archive ecosystem, the unique functionalities of several CMS programs are integrated, including CFOUR, GAMESS, NWChem, OpenMM, Psi4, Qcore, TeraChem, and Turbomole, to provide common computational functions, i.e., energy, gradient, and Hessian computations as well as molecular properties such as atomic charges and vibrational frequency analysis. Both standard users and power users benefit from adopting these APIs as they lower the language barrier of input styles and enable a standard layout of variables and data. These designs allow end-to-end interoperable programming of complex computations and provide best practices options by default.

Projection-Based Wavefunction-in-DFT Embedding.

Complex chemical systems present challenges to electronic structure theory stemming from large system sizes, subtle interactions, coupled dynamical time scales, and electronically nonadiabatic effects. New methods are needed to perform reliable, rigorous, and affordable electronic structure calculations for simulating the properties and dynamics of such systems. This Account reviews projection-based quantum embedding for electronic structure, which provides a formally exact method for density functional theory (DFT) embedding. The method also provides a rigorous and accurate approach for describing a small part of a chemical system at the level of a correlated wavefunction (WF) method while the remainder of the system is described at the level of DFT. A key advantage of projection-based embedding is that it can be formulated in terms of an extremely simple level-shift projection operator, which eliminates the need for any optimized effective potential calculation or kinetic energy functional approximation while simultaneously ensuring that no extra programming is needed to perform WF-in-DFT embedding with an arbitrary WF method. The current work presents the theoretical underpinnings of projection-based embedding, describes use of the method for combining wavefunction and density functional theories, and discusses technical refinements that have improved the applicability and robustness of the method. Applications of projection-based WF-in-DFT embedding are also reviewed, with particular focus on recent work on transition-metal catalysis, enzyme reactivity, and battery electrolyte decomposition. In particular, we review the application of projection-based embedding for the prediction of electrochemical potentials and reaction pathways in a Co-centered hydrogen evolution catalyst. Projection-based WF-in-DFT calculations are shown to provide quantitative accuracy while greatly reducing the computational cost compared with a reference coupled cluster calculation on the full system. Additionally, projection-based WF-in-DFT embedding is used to study the mechanism of citrate synthase; it is shown that projection-based WF-in-DFT largely eliminates the sensitivity of the potential energy landscape to the employed DFT exchange-correlation functional. Finally, we demonstrate the use of projection-based WF-in-DFT to study electron transfer reactions associated with battery electrolyte decomposition. Projection-based WF-in-DFT embedding is used to calculate the oxidation potentials of neat ethylene carbonate (EC), neat dimethyl carbonate (DMC), and 1:1 mixtures of EC and DMC in order to overcome qualitative inaccuracies in the electron densities and ionization energies obtained from conventional DFT methods. By further embedding the WF-in-DFT description in a molecular mechanics point-charge environment, this work enables an explicit description of the solvent and ensemble averaging of the solvent configurations. Looking forward, we anticipate continued refinement of the projection-based embedding methodology as well as its increasingly widespread application in diverse areas of chemistry, biology, and materials science.

Intermolecular interactions and proton transfer in the hydrogen halide-superoxide anion complexes.

The superoxide radical anion O2(-) is involved in many important chemical processes spanning different scientific disciplines (e.g., environmental and biological sciences). Characterizing its interaction with various substrates to help elucidate its rich chemistry may have far reaching implications. Herein, we investigate the interaction between O2(-) (X[combining tilde] (2)Πg) and the hydrogen halides (X[combining tilde] (1)Σ) with coupled-cluster theory. In contrast to the short (1.324 Å) hydrogen bond formed between the HF and O2(-) monomers, a barrierless proton transfer occurs for the heavier hydrogen halides with the resulting complexes characterized as long (>1.89 Å) hydrogen bonds between halide anions and the HO2 radical. The dissociation energy with harmonic zero-point vibrational energy (ZPVE) for FHO2(-) (X[combining tilde] (2)A'') → HF (X[combining tilde] (1)Σ) + O2(-) (X[combining tilde] (2)Πg) is 31.2 kcal mol(-1). The other dissociation energies with ZPVE for X(-)HO2 (X[combining tilde] (2)A'') → X(-) (X[combining tilde] (1)Σ) + HO2 (X[combining tilde] (2)A'') are 25.7 kcal mol(-1) for X = Cl, 21.9 kcal mol(-1) for X = Br, and 17.9 kcal mol(-1) for X = I. Additionally, the heavier hydrogen halides can form weak halogen bonds H-XO2(-) (X[combining tilde] (2)A'') with interaction energies including ZPVE of -2.3 kcal mol(-1) for HCl, -8.3 kcal mol(-1) for HBr, and -16.7 kcal mol(-1) for HI.

Does volunteering decrease burnout? Healthcare professional and student perspectives on burnout and volunteering.

Background: Burnout among healthcare providers is a significant crisis in our healthcare system, especially in the context of the COVID-19 pandemic. The aim of this study was to understand what motivates healthcare workers and students to volunteer in their community as well as examine how volunteering relates to burnout. These findings can help health organizations better meet the needs of healthcare workers, as well as provide insights for non-profits that rely on volunteer professionals. Methods: Healthcare providers (N = 8), graduate healthcare students (N = 10), and undergraduate students (N = 14) who volunteered at community health fairs completed the OLBI burnout assessment and an individual semi-structured interview to characterize their attitudes toward volunteering and its relationship with burnout. Interviews were recorded, transcribed, and analyzed using a phenomenological approach, comparing themes across levels of burnout among providers and students. Results: Participants described that feeling burnt out decreased one's likelihood to volunteer, but also that volunteering prevented burnout. The OLBI scores showed that 79.2 and 20.8% of students were low and moderately burnt out respectively, and 87.5 and 12.5% of health professionals were low and moderately burnt out, respectively. Students volunteered for professional development while healthcare professionals cited a desire for a change in their day-to-day work as a reason to volunteer. Both students and health professionals often volunteered because they wanted to make a difference, it made them feel good, and/or they felt a responsibility to volunteer. COVID-19 had a wide range of effects on burnout and motivations to volunteer. Conclusion: Volunteering may be useful for preventing burnout among healthcare workers and students, but may not be helpful for those already experiencing burnout. Interview responses and the fact that none of the volunteers had high burnout levels according to their OLBI scores suggest those who choose to volunteer may be less burnt out. Healthcare organizations and schools can encourage volunteering by emphasizing the difference healthcare students and professionals can make through volunteering in the community. Increasing convenience and emphasizing professional development can help recruit and retain healthcare student volunteers. Highlighting the chance to diversify their scope of practice may help recruit and retain healthcare professional volunteers.

Mice identify subgoal locations through an action-driven mapping process.

Mammals form mental maps of the environments by exploring their surroundings. Here, we investigate which elements of exploration are important for this process. We studied mouse escape behavior, in which mice are known to memorize subgoal locations-obstacle edges-to execute efficient escape routes to shelter. To test the role of exploratory actions, we developed closed-loop neural-stimulation protocols for interrupting various actions while mice explored. We found that blocking running movements directed at obstacle edges prevented subgoal learning; however, blocking several control movements had no effect. Reinforcement learning simulations and analysis of spatial data show that artificial agents can match these results if they have a region-level spatial representation and explore with object-directed movements. We conclude that mice employ an action-driven process for integrating subgoals into a hierarchical cognitive map. These findings broaden our understanding of the cognitive toolkit that mammals use to acquire spatial knowledge.

Design Considerations for 3D Printed, Soft, Multimaterial Resistive Sensors for Soft Robotics.

Sensor design for soft robots is a challenging problem because of the wide range of design parameters (e.g., geometry, material, actuation type, etc.) critical to their function. While conventional rigid sensors work effectively for soft robotics in specific situations, sensors that are directly integrated into the bodies of soft robots could help improve both their exteroceptive and interoceptive capabilities. To address this challenge, we designed sensors that can be co-fabricated with soft robot bodies using commercial 3D printers, without additional modification. We describe an approach to the design and fabrication of compliant, resistive soft sensors using a Connex3 Objet350 multimaterial printer and investigated an analytical comparison to sensors of similar geometries. The sensors consist of layers of commercial photopolymers with varying conductivities. We characterized the conductivity of TangoPlus, TangoBlackPlus, VeroClear, and Support705 materials under various conditions and demonstrate applications in which we can take advantage of these embedded sensors.