Overwrapping Bivalved Casts: Does the Material Matter?

BACKGROUND: Circumferential integrity of bivalved casts (cut twice longitudinally) can be restored by overwrapping with different materials. This study compared the mechanical properties of solid casts and bivalved casts overwrapped with semirigid fiberglass (SF), elastic bandages (EB), and rigid fiberglass (RF) using an overwrapped-bivalved cast-bone fracture (OBCBF) model. METHODS: This study used an MTS Bionix Servohydraulic system to test properties of OBCBF models in 4 conditions: intact Control made of RF (not bivalved or overwrapped), a Rigid overwrapped model made of a Control bivalved and overwrapped with RF, a Semirigid overwrapped model made of a Control bivalved and overwrapped with SF, and an Elastic model made of a Control bivalved and overwrapped with EB. Constructs were tested in 4-point bending. Force-displacement curves (FDC) were generated to calculate load-at-critical-failure (LCF, angulation > 10 degrees = 6.6 mm vertical deformation) and stiffness. RESULTS: Five controls and 30 OBCBF models with 3 overwrapped cast types were tested, with each overwrapped cast type tested with 2 orientations of the initial cast bivalve axis, yielding 7 conditions (Control, Rigid 0 degrees, Rigid 90 degrees, Semirigid 0 degrees, Semirigid 90 degrees, Elastic 0 degrees, Elastic 90 degrees). Mean LCF was: Rigid 90 degrees > Rigid 0 degrees > Control > Semirigid 0 degrees > Semirigid 90 degrees > Elastic 90 degrees > Elastic 0 degrees (P<0.0001). Mean stiffness was: Rigid 0 degrees > Rigid 90 degrees > Control > Semirigid 90 degrees > Semirigid 0 degrees > Elastic 0 degrees > Elastic 90 degrees (P<0.0001). Multiple comparisons indicated no significant difference between LCF and stiffness for Semirigid 0 degrees/90 degrees casts compared with Controls. CONCLUSIONS: Mechanical properties of overwrapped bivalved casts change depending on the materials used to overwrap, with higher LCF and stiffness when overwrapping with RF > SF > EB; however, mean comparisons indicate that rigid bivalved casts overwrapped with SF did not have significantly different mean stiffness and LCF from controls and other cast models. CLINICAL RELEVANCE: This study compares the bending properties of a bivalved cast-construct overwrapped with different materials, providing basic science evidence for orthopaedic surgeons who have several choices of materials to overwrap bivalved casts.

The composition of the choice set modulates probability weighting in risky decisions.

Probability distortion-the tendency to underweight larger probabilities and overweight smaller ones-is a robust empirical phenomenon and an important driver of suboptimal choices. We reveal a novel contextual effect on probability distortion that depends on the composition of the choice set. Probability distortion was larger in a magnitude-diverse choice set (in which participants encountered more unique magnitudes than probabilities) but declined, resulting in more veridical weighting, in a probability-diverse choice set (more unique probabilities than magnitudes). This effect was consistent in two, large, independent datasets (N = 481, N = 100) and held for a subset of lotteries that were identical in the two contexts. It also developed gradually as a function of exposure to the choice set, was independent of attentional biases to probability versus magnitude information, and was specific to probability weighting, leaving risk attitudes unaffected. The results highlight the importance of context when processing probabilistic information.

Validation of 2 Novel and Complementary Training Platforms for Small Joint Arthroscopy.

PURPOSE: We developed 2 complementary low-fidelity models to be used to create the tool skills needed to perform small joint arthroscopy. The purpose of the study was to establish the face and construct validity of the 2 models. METHODS: The "foundation model" was constructed from lemon and radish sections, and the "advanced model" was constructed from a chicken knee. Using both models, novice, intermediate, and experienced participants were asked to perform specific tasks and were timed and scored on their performance. The experienced surgeons were given a 16-item survey to rate how closely each model emulated reality to determine face validity. RESULTS: For the foundation model, the mean total time for the completion of tasks was 1,138 seconds for novices, 1,059 seconds for intermediates, and 631 seconds for experienced, with significant differences between the groups for time to complete 2 of the tasks. With a maximum possible score of 50 points for the correct performance of all tasks, the mean total performance score was 23 for novices, 31.8 for intermediates, and 42.2 for experienced operators. For the advanced model, the mean total time for completion was 266 seconds for novices, 147 seconds for intermediates, and 72 seconds for experienced participants. With a maximum possible score of 31 points for the correct performance of all tasks, the mean total performance score was 1.9 for novices, 15.0 for intermediates, and 24.3 for experienced participants. The average scores for the face validity surveys using a 5-point Likert scale were 4.2 and 4.5 of 5 possible points for the foundation and advanced models, respectively. CONCLUSIONS: Experienced operators completed the tasks more quickly and had higher performance scores than the operators in other groups. This correlation between experience and performance suggests that both models have construct validity. The face validity scores were on the upper end of the scale, suggesting that both models emulate reality for experienced operators. CLINICAL RELEVANCE: These novel models provide low-cost, available and valid simulations conducive to high-repetition training.

Forced Intercalation (FIT)-Aptamers.

Aptamers are oligonucleotide sequences that can be evolved to bind to various analytes of interest. Here, we present a general design strategy that transduces an aptamer-target binding event into a fluorescence readout via the use of a viscosity-sensitive dye. Target binding to the aptamer leads to forced intercalation (FIT) of the dye between oligonucleotide base pairs, increasing its fluorescence by up to 20-fold. Specifically, we demonstrate that FIT-aptamers can report target presence through intramolecular conformational changes, sandwich assays, and target-templated reassociation of split-aptamers, showing that the most common aptamer-target binding modes can be coupled to a FIT-based readout. This strategy also can be used to detect the formation of a metallo-base pair within a duplexed strand and is therefore attractive for screening for metal-mediated base pairing events. Importantly, FIT-aptamers reduce false-positive signals typically associated with fluorophore-quencher based systems, quantitatively outperform FRET-based probes by providing up to 15-fold higher signal to background ratios, and allow rapid and highly sensitive target detection (nanomolar range) in complex media such as human serum. Taken together, FIT-aptamers are a new class of signaling aptamers which contain a single modification, yet can be used to detect a broad range of targets.

Co-current crossflow microfiltration in a microchannel.

Steady state crossflow microfiltration (CMF) is an important and often necessary means of particle separation and concentration for both industrial and biomedical processes. The factors controlling the performance of CMF have been extensively reviewed. A major factor is transmembrane pressure (TMP). Because microchannels have small height, they tend to have high pressure gradients in the feed-flow direction. In the extreme, these gradients may even reverse the pressure across the membrane (inciting backflow). It is therefore desirable to compensate for the effect of feed-flow on the TMP, aiming at constant transmembrane pressure (cTMP) at a value which maximizes filtrate flux. This is especially critical during filtration of deformable particles (e.g. erythrocytes) through low intrinsic resistance membranes. Filtration flux is generally taken to be directly proportional to TMP, with pressure drop along the channel decreasing in the flow direction. A co-current flow of filtrate in a suitably designed filtrate collecting channel is shown to allow the TMP to remain constant and permit the sieving surface to perform optimally, permitting up to twice as much filtration over that of a naïve configuration. Manipulation of the filtrate channel may be even more beneficial if it prevents backflow that might otherwise occur at the end of a sufficiently long channel. Experiments with erythrocyte suspensions, reported here, validate these concepts.

Erythrocyte fouling on micro-engineered membranes.

Crossflow microfiltration of plasma from blood through microsieves in a microchannel is potentially useful in many biomedical applications, including clinically as a wearable water removal device under development by the authors. We report experiments that correlate filtration rates, transmembrane pressures (TMP) and shear rates during filtration through a microscopically high channel bounded by a low intrinsic resistance photolithographically-produced porous semiconductor membrane. These experiments allowed observation of erythrocyte behavior at the filtering surface and showed how their unique deformability properties dominated filtration resistance. At low filtration rates (corresponding to low TMP), they rolled along the filter surface, but at higher filtration rates (corresponding to higher TMP), they anchored themselves to the filter membrane, forming a self-assembled, incomplete monolayer. The incompleteness of the layer was an essential feature of the monolayer's ability to support sustainable filtration. Maximum steady-state filtration flux was a function of wall shear rate, as predicted by conventional crossflow filtration theory, but, contrary to theories based on convective diffusion, showed weak dependence of filtration on erythrocyte concentration. Post-filtration scanning electron micrographs revealed significant capture and deformation of erythrocytes in all filter pores in the range 0.25 to 2 µm diameter. We report filtration rates through these filters and describe a largely unrecognized mechanism that allows stable filtration in the presence of substantial cell layers.

The Grapefruit: An Alternative Arthroscopic Tool Skill Platform.

PURPOSE: To establish the construct validity of an arthroscopic training model that teaches arthroscopic tool skills including triangulation, grasping, precision biting, implant delivery and ambidexterity and uses a whole grapefruit for its training platform. METHODS: For the grapefruit training model (GTM), an arthroscope and arthroscopic instruments were introduced through portals cut in the grapefruit skin of a whole prepared grapefruit. After institutional review board approval, participants performed a set of tasks inside the grapefruit. Performance for each component was assessed by recording errors, achievement of criteria, and time to completion. A total of 19 medical students, orthopaedic surgery residents, and fellowship-trained orthopaedic surgeons were included in the analysis and were divided into 3 groups based on arthroscopic experience. One-way analysis of variance (ANOVA) and the post hoc Tukey test were used for statistical analysis. RESULTS: One-way ANOVA showed significant differences in both time to completion and errors between groups, F(2, 16) = 16.10, P < .001; F(2, 16) = 17.43, P < .001. Group A had a longer time to completion and more errors than group B (P = .025, P = .019), and group B had a longer time to completion and more errors than group C (P = .023, P = .018). CONCLUSIONS: The GTM is an easily assembled and an alternative arthroscopic training model that bridges the gap between box trainers, cadavers, and virtual reality simulators. Our findings suggest construct validity when evaluating its use for teaching the basic arthroscopic tool skills. As such, it is a useful addition to the arthroscopic training toolbox. CLINICAL RELEVANCE: There is a need for validated low-cost arthroscopic training models that are easily accessible.

Is Teaching Simple Surgical Skills Using an Operant Learning Program More Effective Than Teaching by Demonstration?

BACKGROUND: A surgical procedure is a complex behavior that can be constructed from foundation or component behaviors. Both the component and the composite behaviors built from them are much more likely to recur if it they are reinforced (operant learning). Behaviors in humans have been successfully reinforced using the acoustic stimulus from a mechanical clicker, where the clicker serves as a conditioned reinforcer that communicates in a way that is language- and judgment-free; however, to our knowledge, the use of operant-learning principles has not been formally evaluated for acquisition of surgical skills. QUESTIONS/PURPOSES: Two surgical tasks were taught and compared using two teaching strategies: (1) an operant learning methodology using a conditioned, acoustic reinforcer (a clicker) for positive reinforcement; and (2) a more classical approach using demonstration alone. Our goal was to determine whether a group that is taught a surgical skill using an operant learning procedure would more precisely perform that skill than a group that is taught by demonstration alone. METHODS: Two specific behaviors, "tying the locking, sliding knot" and "making a low-angle drill hole," were taught to the 2014 Postgraduate Year (PGY)-1 class and first- and second-year medical students, using an operant learning procedure incorporating precise scripts along with acoustic feedback. The control groups, composed of PGY-1 and -2 nonorthopaedic surgical residents and first- and second-year medical students, were taught using demonstration alone. The precision and speed of each behavior was recorded for each individual by a single experienced surgeon, skilled in operant learning. The groups were then compared. RESULTS: The operant learning group achieved better precision tying the locking, sliding knot than did the control group. Twelve of the 12 test group learners tied the knot and precisely performed all six component steps, whereas only four of the 12 control group learners tied the knot and correctly performed all six component steps (the test group median was 10 [range, 10-10], the control group median was 0 [range, 0-10], p = 0.004). However, the median "time to tie the first knot" for the test group was longer than for the control group (test group median 271 seconds [range, 184-626 seconds], control group median 163 seconds [range 93-900 seconds], p = 0.017), whereas the "time to tie 10 of the locking, sliding knots" was the same for both groups (test group mean 95 seconds ± SD = 15 [range, 67-120 seconds], control group mean 95 seconds ± SD = 28 [range, 62-139 seconds], p = 0.996). For the low-angle drill hole test, the test group more consistently achieved the ideal six-step behavior for precisely drilling the low-angle hole compared with the control group (p = 0.006 for the median number of technique success comparison with an odds ratio [at the 95% confidence interval] of 82.3 [29.1-232.8]). The mean time to drill 10 low-angle holes was not different between the test group (mean 193 seconds ± SD = 26 [range, 153-222 seconds]) and the control group (mean 146 seconds ± SD = 63 [range, 114-294 seconds]) (p = 0.084). CONCLUSIONS: Operant learning occurs as the behavior is constructed and is highly reinforced with the result measured, not in the time saved, but in the ultimate outcome of an accurately built complex behavior. LEVEL OF EVIDENCE: Level II, therapeutic study.

Efficacy of tenofovir and efavirenz in combination with lamivudine or emtricitabine in antiretroviral-naive patients in Europe.

BACKGROUND: The combination of tenofovir and efavirenz with either lamivudine or emtricitabine (TELE) has proved to be highly effective in clinical trials for first-line treatment of HIV-1 infection. However, limited data are available on its efficacy in routine clinical practice. METHODS: A multicentre cohort study was performed in therapy-naive patients initiating ART with TELE before July 2009. Efficacy was studied using ITT (missing or switch = failure) and on-treatment (OT) analyses. Genotypic susceptibility scores (GSSs) were determined using the Stanford HIVdb algorithm. RESULTS: Efficacy analysis of 1608 patients showed virological suppression to <50 copies/mL at 48 weeks in 91.5% (OT) and 70.6% (ITT). Almost a quarter of all patients (22.9%) had discontinued TELE at week 48, mainly due to CNS toxicity. Virological failure within 48 weeks was rarely observed (3.3%, n = 53). In multilevel, multivariate analysis, infection with subtype B (P = 0.011), baseline CD4 count <200 cells/mm³ (P < 0.001), GSS <3 (P = 0.002) and use of lamivudine (P < 0.001) were associated with a higher risk of virological failure. After exclusion of patients using co-formulated compounds, virological failure was still more often observed with lamivudine. Following virological failure, three-quarters of patients switched to a PI-based regimen with GSS <3. After 1 year of second-line therapy, viral load was suppressed to <50 copies/mL in 73.5% (OT). CONCLUSIONS: In clinical practice, treatment failure on TELE regimens is relatively frequent due to toxicity. Virological failure is rare and more often observed with lamivudine than with emtricitabine. Following virological failure on TELE, PI-based second-line therapy was often successful despite GSS <3.

P-values in genomics: apparent precision masks high uncertainty.

Scientists often interpret P-values as measures of the relative strength of statistical findings. This is common practice in large-scale genomic studies where P-values are used to choose which of numerous hypothesis test results should be pursued in subsequent research. In this study, we examine P-value variability to assess the degree of certainty P-values provide. We develop prediction intervals for the P-value in a replication study given the P-value observed in an initial study. The intervals depend on the initial value of P and the ratio of sample sizes between the initial and replication studies, but not on the underlying effect size or initial sample size. The intervals are valid for most large-sample statistical tests in any context, and can be used in the presence of single or multiple tests. While P-values are highly variable, future P-value variability can be explicitly predicted based on a P-value from an initial study. The relative size of the replication and initial study is an important predictor of the P-value in a subsequent replication study. We provide a handy calculator implementing these results and apply them to a study of Alzheimer's disease and recent findings of the Cross-Disorder Group of the Psychiatric Genomics Consortium. This study suggests that overinterpretation of very significant, but highly variable, P-values is an important factor contributing to the unexpectedly high incidence of non-replication. Formal prediction intervals can also provide realistic interpretations and comparisons of P-values associated with different estimated effect sizes and sample sizes.

Reaching environmental levels of 244Pu by accelerator mass spectrometry at the Centro Nacional de Aceleradores.

244Pu (T1/2 = 81 My) is the longest-lived, most minor, and the most understudied Pu isotope. The anthropogenic production of 244Pu is linked to nuclear detonations. Reported 244Pu/239Pu atom ratios in environmental samples range from below 10-6 to above 10-3. This work discusses the performance of the 1 MV Accelerator Mass Spectrometry system at the Centro Nacional de Aceleradores (CNA, Seville, Spain) to analyse 244Pu at environmental levels. The presence of 232Th traces in the Pu sample limits the sensitivity of the technique through the formation of the diatomic trication (232Th12C)3+, of mass 244 u, which must be suppressed by adjusting the stripper gas pressure. A244Pu background of 0.0075 fg (2 × 104 at) is demonstrated for samples that have undergone a chemical treatment. The reliability of the technique is proved through the analysis of three reference sediments provided by the International Atomic Energy Agency (IAEA-412, IAEA-465, IAEA-385). 244Pu results are complemented with 239Pu, 240Pu, 241Pu and 236U and their relative isotopic abundances are discussed.

A new certified reference material IAEA-465 for radionuclides in Baltic Sea sediment.

Certified reference material (CRM) for natural (40K,210Pb,210Po,226Ra,228Ra,228Th,230Th,232Th,234U,235U, and238U) and anthropogenic (137Cs,239+240Pu, and241Am) radionuclides in marine sediment from the Baltic Sea (IAEA-465) has been developed. Information values are given for 238Pu,239Pu and240Pu. Altogether 27 laboratories participated in this exercise. Radiometric (alpha-spectrometry, gamma-spectrometry and beta counting, as well as mass spectrometry (ICP-MS and AMS) techniques were applied in measurements. The CRM is intended to be used for Quality Assurance/Quality Control of radionuclide analyses, for the development and validation of analytical methods, for the development of reference methods and for training purposes.

Acute calciphylaxis precipitated by the initiation of hemodialysis.

Calciphylaxis, or calcific uremic arteriopathy (CUA), is characterized by metastatic calcification in the media of small arteries and arterioles leading to cutaneous necrosis. It is most commonly seen in patients with end stage renal disease who have elevated serum calcium × phosphorus (Ca × P) product. Normalization of Ca × P product is considered paramount in the prevention and treatment of CUA. We describe a novel presentation of CUA in which a Stage-5 CKD patient developed signs and symptoms of CUA immediately after initiation of hemodialysis (HD). We postulate that an influx of calcium from the dialysate into the patient's blood, in addition to correction of her acidosis, led to abundant substrate in a favorable milieu for Ca-P complex formation at the time of her first HD session. Our case is the first reported case of HD associated iatrogenic acute CUA. To avoid this complication, we should maintain adequate hydration,use lower calcium dialysate, and avoid vitamin D analogues and calcium-containing medications when initiating HD in patients with high Ca-P product. Since sodium thiosulfate is known to prevent precipitation of Ca-P complexes, its empiric use during initial HD treatments may be effective in preventing CUA, a potentially fatal disease.

Teaching Tracheostomy Tube Changes: Comparison of Operant Learning Versus Traditional Demonstration.

Objective: Tracheostomy tube change is a multistep skill that must be performed rapidly and precisely. Despite the critical importance of this skill, there is wide variation in teaching protocols. Methods: An innovative operant conditioning teaching methodology was employed and compared to traditional educational techniques. Medical student volunteers at a tertiary care academic institution (Albert Einstein College of Medicine) were recruited and randomly distributed into 2 groups: operant vs traditional (control). Following the educational session, each group was provided with practice time and then asked to perform 10 tracheostomy tube changes. Performance was recorded and scored by blinded raters using deidentified video recordings. Results: The operant learning group (OLG) demonstrated greater accuracy in performing a tracheostomy tube change than the traditional demonstration group. Twelve of 13 operant learners performed the skill accurately each time compared to 3 of 13 in the traditional group (P = 0.002). The median lesson time was longer for the OLG (535 seconds) than for the traditional group, (200 seconds P < 0.001). The average time per tracheostomy change was not significantly different between the 2 groups (operant learners mean 7.1 seconds, traditional learners mean 7.5 seconds, P = 0.427). Discussion: Although the operant conditioning methodology necessarily requires a greater time to teach, the results support this methodology over traditional learning modalities as it enhances accuracy in the acquired skill. Operant learning methodology is under consideration for other skills and education sessions in our program. Future steps include the application and adaptation of this education model to students and residents in other settings and fields. Implications for Practice: Operant learning is effective for teaching multistep skills such as tracheostomy tube changes with decreased error rates.

Development and validation of a brief screener for posttraumatic stress disorder risk in emergency medical settings.

OBJECTIVE: Predicting risk of posttraumatic stress disorder (PTSD) in the acute care setting is challenging given the pace and acute care demands in the emergency department (ED) and the infeasibility of using time-consuming assessments. Currently, no accurate brief screening for long-term PTSD risk is routinely used in the ED. One instrument widely used in the ED is the 27-item Immediate Stress Reaction Checklist (ISRC). The aim of this study was to develop a short screener using a machine learning approach and to investigate whether accurate PTSD prediction in the ED can be achieved with substantially fewer items than the IRSC. METHOD: This prospective longitudinal cohort study examined the development and validation of a brief screening instrument in two independent samples, a model development sample (N = 253) and an external validation sample (N = 93). We used a feature selection algorithm to identify a minimal subset of features of the ISRC and tested this subset in a predictive model to investigate if we can accurately predict long-term PTSD outcomes. RESULTS: We were able to identify a reduced subset of 5 highly predictive features of the ISRC in the model development sample (AUC = 0.80), and we were able to validate those findings in the external validation sample (AUC = 0.84) to discriminate non-remitting vs. resilient trajectories. CONCLUSION: This study developed and validated a brief 5-item screener in the ED setting, which may help to improve the diagnostic process of PTSD in the acute care setting and help ED clinicians plan follow-up care when patients are still in contact with the healthcare system. This could reduce the burden on patients and decrease the risk of chronic PTSD.

Calibration of image plate and back illuminated charge coupled device detectors at the thermal emission band of high Z target laser produced plasmas (80-800 eV).

We present a systematic method to absolutely calibrate detector efficiency vs photon energy using a laser produced plasma broadband x-ray source, a gold standard calibrated detector, and transmission gratings (TGs) as dispersive elements. Calibration uses one calibrated TG and a calibrated gold standard detector on one channel and a second calibrated TG and a detector to be calibrated on the other channel. Both channels simultaneously view the laser-produced plasma x-ray source from the same angle with respect to the laser beam and the planar target normal. Image plate detectors are calibrated for the first time at photon energies below 700 eV. Single shot simultaneous calibration of several detectors is possible, making this method an efficient and practical way to periodically calibrate detectors, using in-house capabilities of laser laboratories.

The Value of 2 Orthopaedic Learning Platforms from the Learners' and Educators' Point of View.

Online learning platforms are a staple of orthopaedic resident education. These platforms typically address a user's knowledge base, aiming to improve OITE and AAOS Board Examination scores. Orthopaedic residents often use these platforms as their primary educational resource. However, an orthopaedic surgeon is more than an orthopaedic knowledge base; acquisition of clinical acumen is integral as well. We sought to investigate the following: From a learner's and educator's perspective, do Orthobullets (OB) and Clinical Classroom (CC) contribute to both knowledge base and clinical acumen? Methods: Thirty residents and 16 attending surgeons at a single institution were assigned to review topics and complete questions on either the OB and CC platform. Participants then filled out surveys regarding the platform they were assigned, switched platforms, and completed a final survey. Independent-samples Student t tests and χ2 tests were used to analyze differences in continuous and categorical data. Results: Residents and attendings reported a preference for OB for fact acquisition, relevance to the OITE, and explanation of answers. Senior residents (PGY5) and attending surgeons reported that CC had a greater impact on their clinical acumen. Junior residents (PGY1, PGY2, and PGY3) reported the opposite. Participants responded that both platforms expand a learner's knowledge base and clinical acumen. Conclusions: Learners and educators felt both platforms addressed knowledge base and clinical acumen. Junior residents reported a preference for OB to CC to advance their knowledge base and clinical acumen, but senior residents and attendings felt the opposite was true. Based on survey responses, these platforms were found to be additive, complementary, and that their value to the learner changes during the course of residency education. Level of Evidence: III.

Systematic Review of Injuries in the Men's and Women's National Basketball Association.

BACKGROUND: Numerous studies have reported the incidence and outcomes of injuries in the men's and women's National Basketball Association (NBA and WNBA, respectively). PURPOSE: To synthesize published data regarding the incidence and outcomes of all injuries in the NBA and WNBA in a comprehensive review. STUDY DESIGN: Systematic review; Level of evidence, 4. METHODS: Following PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines, we searched 3 electronic databases (PubMed, MEDLINE, Embase) for studies of all levels of evidence since 1990 pertaining to injuries sustained by active players in the NBA and WNBA. Studies were excluded if the cohort of interest included ≤3 active players. RESULTS: The initial search of the 3 databases yielded 1253 unique studies, of which 49 met final inclusion criteria for this review. Only 4 studies included athletes in the WNBA. Based on the mean annual incidence, the 5 most common orthopaedic sports injuries sustained in the NBA were concussions (9.5-14.9 per year), fractures of the hand (3.5-5.5 per year), lower extremity stress fractures (4.8 per year), meniscal tears (2.3-3.3 per year), and anterior cruciate ligament tears (1.5-2.6 per year). Cartilage defects treated using microfracture, Achilles tendon ruptures, and anterior cruciate ligament injuries were 3 injuries that led to significant reductions in performance measurements after injury. CONCLUSION: With advances in sports technology and statistical analysis, there is rapidly growing interest in injuries among professional basketball athletes. High-quality prospective studies are needed to understand the prevalence and effect of injuries on player performance and career length. This information can inform preventative and treatment measures taken by health care providers to protect players and guide safe return to play at a high level.

A narrative review of lateral meniscus transplantation with the bridge in slot: technique and outcomes.

Objective: This narrative review aims to detail the indications, technique, and published outcomes of the bridge in slot technique for lateral meniscus allograft transplantation (LMAT) and to serve as a concise reference for orthopaedists looking to incorporate this method into their practice. Background: The menisci are crucial to normal knee function but are commonly injured; partial and subtotal meniscectomy are frequently performed to address meniscal pathology. Following these procedures, a substantial number of patients go on to develop degenerative joint changes accompanied by pain and disability. LMAT is an attractive option for young, active, lateral meniscal-deficient patients who seek pain relief and improved function but who are not yet prepared to undergo arthroplasty. In the properly indicated patient, the bridge in slot technique is a reliable and effective method for LMAT. Methods: Using a narrative style, this review outlines the indications and preoperative assessment for LMAT, the detailed technical steps for the bridge in slot technique, postoperative considerations, and trends in the surgical outcomes literature. The presented technique is consistent with the senior author's clinical experience and with published literature and the discussed outcomes are elicited from a focused review of recent peer-reviewed sources. Conclusions: The bridge in slot technique is a reliable and effective method for LMAT and is supported by the literature. This technique may confidently be used in patients with severe lateral meniscal pathology who are not yet candidates for arthroplasty.

Fate of anthropogenic radionuclides (90Sr, 137Cs, 238Pu, 239Pu, 240Pu, 241Am) in seawater in the northern Benguela upwelling system off Namibia.

A baseline study on anthropogenic radioactivity in the Namibian marine ecosystem, which is part of the northern Benguela upwelling system, known as one of the most productive ocean areas in the world, has been performed. A scientific cruise carried out in 2014 covering inshore and offshore areas, exhibiting different oceanographic features, has provided a basis for better understanding the distributions, ratios and inventories of six anthropogenic radionuclides (90Sr, 137Cs, 238Pu, 239Pu, 240Pu and 241Am) in seawater. Although 3H was also measured, due to extremely low levels, its behaviour was not studied. The main source of 90Sr, 137Cs, 239Pu, 240Pu and 241Am in the samples analysed was proven to be global fallout, a finding further confirmed by 240Pu/239Pu and 90Sr/137Cs ratios. Furthermore, the 238Pu SNAP-9A satellite accident signal was confirmed once again through the determination of the 238Pu/239+240Pu activity ratio. Inshore and offshore samples showed different patterns due to the unique oceanographic features of this upwelling system. The levels of anthropogenic radionuclides, comprehensively assessed for the first time in this region, are comparable with the few existing data and filled a critical gap for the Southern Atlantic Ocean.