GTPase activity of porcine Mx1 plays a dominant role in inhibiting the N-Nsp9 interaction and thus inhibiting PRRSV replication.

Porcine Mx1 is a type of interferon-induced GTPase that inhibits the replication of certain RNA viruses. However, the antiviral effects and the underlying mechanism of porcine Mx1 for porcine reproductive and respiratory syndrome virus (PRRSV) remain unknown. In this study, we demonstrated that porcine Mx1 could significantly inhibit PRRSV replication in MARC-145 cells. By Mx1 segment analysis, it was indicated that the GTPase domain (68-341aa) was the functional area to inhibit PRRSV replication and that Mx1 interacted with the PRRSV-N protein through the GTPase domain (68-341aa) in the cytoplasm. Amino acid residues K295 and K299 in the G domain of Mx1 were the key sites for Mx1-N interaction while mutant proteins Mx1(K295A) and Mx1(K299A) still partially inhibited PRRSV replication. Furthermore, we found that the GTPase activity of Mx1 was dominant for Mx1 to inhibit PRRSV replication but was not essential for Mx1-N interaction. Finally, mechanistic studies demonstrated that the GTPase activity of Mx1 played a dominant role in inhibiting the N-Nsp9 interaction and that the interaction between Mx1 and N partially inhibited the N-Nsp9 interaction. We propose that the complete anti-PRRSV mechanism of porcine Mx1 contains a two-step process: Mx1 binds to the PRRSV-N protein and subsequently disrupts the N-Nsp9 interaction by a process requiring the GTPase activity of Mx1. Taken together, the results of our experiments describe for the first time a novel mechanism by which porcine Mx1 evolves to inhibit PRRSV replication. IMPORTANCE: Mx1 protein is a key mediator of the interferon-induced antiviral response against a wide range of viruses. How porcine Mx1 affects the replication of porcine reproductive and respiratory syndrome virus (PRRSV) and its biological function has not been studied. Here, we show that Mx1 protein inhibits PRRSV replication by interfering with N-Nsp9 interaction. Furthermore, the GTPase activity of porcine Mx1 plays a dominant role and the Mx1-N interaction plays an assistant role in this interference process. This study uncovers a novel mechanism evolved by porcine Mx1 to exert anti-PRRSV activities.

Synthesis, Crystal Structure, and Photophysical Properties of Bromothiophene-Functionalized BF2-Curcuminoid as a Versatile Building Block.

A novel bromothiophene-functionalized BF2-curcuminoid (BTC-BF2) is synthesized by Knoevenagel condensation reaction. The structure of BTC-BF2 is determined by 1H-nuclear magnetic resonance (1H NMR), 13C-nuclear magnetic resonance (13C NMR), and high-resolution mass spectrometry (HRMS). Moreover, a nearly coplanar single crystal structure is successfully obtained and form a mesh structure through intermolecular multiple C─H···F hydrogen bond interactions. As expected, as-prepared BTC-BF2 exhibits solvent-dependent photophysical properties in solvents with different polarity and an intense red solid-state fluorescence. Density functional theory calculations further verify the relationships between its intrinsic electronic features and the photophysical properties. For its potential application aspect, BTC-BF2 shows a certain ability to generate singlet oxygen under irradiation with 530 nm green light. Moreover, BTC-BF2 can be utilized as versatile building block to construct novel far-red or NIR BF2-curcuminoid complexes for widely biological applications.

Biological characteristics and genomic analysis of a novel Escherichia phage Kayfunavirus CY1.

As the problem of bacterial resistance becomes serious day by day, bacteriophage as a potential antibiotic substitute attracts more and more researchers' interest. In this study, Escherichia phage Kayfunavirus CY1 was isolated from sewage samples of swine farms and identified by biological characteristics and genomic analysis. One-step growth curve showed that the latent period of phage CY1 was about 10 min, the outbreak period was about 40 min and the burst size was 35 PFU/cell. Analysis of the electron microscopy and whole-genome sequence showed that the phage should be classified as a member of the Autographiviridae family, Studiervirinae subfamily. Genomic analysis of phage CY1 (GenBank accession no. OM937123) revealed a genome size of 39,173 bp with an average GC content of 50.51% and 46 coding domain sequences (CDSs). Eight CDSs encoding proteins involved in the replication and regulation of phage DNA, 2 CDSs encoded lysis proteins, 14 CDSs encoded packing and morphogenesis proteins. Genomic and proteomic analysis identified no sequence that encoded for virulence factor, integration-related proteins or antibiotic resistance genes. In summary, morphological and genomics suggest that phage CY1 is more likely a novel Escherichia phage.

Characterization and genome analysis of a novel phage Kayfunavirus TM1.

Escherichia coli is a common conditional pathogen, for which antibiotic therapy is considered an effective treatment. The imprudent use of antibiotics has led to the increase of multiple-antibiotic-resistant E. coli species. With the incidence of antibiotic resistance reaching a crisis point, it is imperative to find alternative treatments for multidrug-resistant infections. Using phage for pathogen control is a promising treatment option to combat bacterial resistance. In this study, a novel virulent Podoviridae phage Kayfunavirus TM1 infecting Escherichia coli was isolated from pig farm sewage in Guangxi, China. The one-step growth curve with the optimal multiplicity of infection of 0.01 revealed a latent period of 10 min and a burst size of 50 plaque-forming units per cell. The stability test reveals that it is stable from 4 to 60 °C and pH from 3 to 11. The double-stranded DNA genome of phage Kayfunavirus TM1 is composed of 39,948 base pairs with a GC content of 50.03%.

Oral phage therapy with microencapsulated phage A221 against Escherichia coli infections in weaned piglets.

BACKGROUND: Escherichia coli (E. coli) is a common pathogen that often causes diarrhea in piglets. Since bacteria are becoming more and more resistant to antibiotics, phages have become a promising alternative therapy. However, the therapy of oral phage often fails to achieve the desired effect. A novel phage named A221 was isolated by using E. coli GXXW-1103 as host strain, characterized by electron microscopy, genomic sequencing and analyzed by measuring lysis ability in vitro. RESULTS: Phage A221 was identified as a member of Ackermannviridae, Aglimvirinae, Agtrevirus with 153297 bp genome and effectively inhibited bacterial growth in vitro for 16 h. This study was conducted to evaluate the therapeutic effect of oral microencapsulated phage A221 on E. coli GXXW-1103 infections in weaned piglets. The protective effect of phage was evaluated by body weight analysis, bacterial load and histopathological changes. The results showed that with the treatment of phage A221, the body weight of piglets increased, the percentage of Enterobacteriaceae in duodenum decreased to 0.64%, the lesions in cecum and duodenum were alleviated, and the bacterial load in the jejunal lymph nodes, cecum and spleen were also significantly different with infected group (P < 0.001). CONCLUSIONS: The results showed that phage A221 significantly increased the daily weight gain of piglets, reduced the bacterial load of tissues and the intestinal lesions, achieved the same therapeutic effect as antibiotic Florfenicol. Taken together, oral microencapsulated phage A221 has a good therapeutic effect on bacterial diarrhea of weaned piglets, which provides guidance for the clinical application of phage therapy in the future.

Dithienylethene-Bridged Fluoroquinolone Derivatives for Imaging-Guided Reversible Control of Antibacterial Activity.

The emerging field of photopharmacology has offered a promising alternative to guard against the bacterial resistance by effectively avoiding antibiotic accumulation in the body or environment. However, the degradation, toxicity, and thermal reversibility have always been an ongoing concern for potential applications of azobenzene-based photopharmacology. Developing novel photopharmacological agents based on a more matched switch is highly in demand and remains a major challenge. Herein, two novel dithienylethene-bridged dual-fluoroquinolone derivatives have been developed by introducing two fluoroquinolone drugs into both ends of the dithienylethene (DTE) switch, in which the fluoroquinolone acts as a fluorophore except for the pharmacodynamic component. For comparison, two monofluoroquinolone-DTE hybrids were also prepared by a similar strategy. As expected, these resultant DTE-based antibacterial agents displayed efficient photochromism and fluorescence switching behavior in dimethyl sulfoxide. Moreover, improved antibacterial activities compared to those of monofluoroquinolone derivatives and a maximum fourfold active difference against Escherichia coli (E. coli) for open and closed isomers and photoswitchable bacterial imaging for Staphylococcus aureus and E. coli were observed. The molecular docking to DNA gyrase gave a rationale for the discrepancies in antibacterial activity for both isomers. Therefore, these fluoroquinolone derivatives can act as interesting imaging-guided photopharmacological agents for further in vivo studies.

Construction of C-C Axial Chirality via Asymmetric Carbene Insertion into Arene C-H Bonds.

By using diazonaphthoquinones and anilines as key reagents and through a point-to-axis chiral transfer strategy, the atroposelective synthesis via asymmetric C(sp2 )-H bond insertion reaction of arenes has been realized under rhodium catalysis, providing the resulting biaryl atropisomers in moderate to excellent yields with good enantiomeric ratios (up to 99:1). Further elaboration indicates this type of axially biaryl scaffold may have promising potentials in developing novel chiral ligands.

Blue-/NIR Light-Excited Fluorescence Switch Based on a Carbazole-Dithienylethene-BF2bdk Triad.

The development of novel solid-state fluorescence switches, particularly triggered by visible light, is of increasing interest for the potential application in optical data storage and super-resolution fluorescence microscopies. In this study, two carbazole-dithienylethene-BF2bdk triads CDB1 and CDB2, suspending carbazole and BF2bdk moieties on both sides of dithienylethene unit, have been developed. They exhibit blue-/NIR light-controlled photochromism with solvent-dependent characteristics. Moreover, CDB1 (o) reveals blue-/NIR light-induced reversible fluorescent switching behaviors in toluene, chloroform, poly(methyl methacrylate) (PMMA) film, and powder state, while its analogue CDB2 (o) in the powder state exhibits no fluorescence due to a strong intermolecular π-π stacking interaction, and the fluorescent switching performance is observed only in toluene and PMMA film. The density functional theory calculations further validate the differences in their optical properties in the solution and powder states.

Synthesis and properties of dithienylethene-functionalized switchable antibacterial agents.

Photopharmacology involving azobenzene has offered a viable alternative for combating bacterial resistance. However, the degradation and potential toxicity of azobenzene limit its further study in vivo. Therefore, searching for an appropriate photoswitch for further clinical application is highly desirable. Herein a series of dithienylethene-functionalized switchable antibacterial agents have been designed and prepared by the introduction of the dithienylethene scaffold into fluoroquinolones. And it was found that these switchable antibacterial agents displayed good photochromism and fluorescence switching behaviors upon irradiation with UV/Vis light in DMSO. Surprisingly, methoxy-substituted dithienylethenes 3a and 3b exhibited fluorescence turn-on behavior. Furthermore, it was found that all of the open-isomers showed partial antibacterial activity on E. coli and S. aureus compared with the native drugs. Apart from 2a and 2b, the other switchable antibacterial agents showed a large difference in antibacterial activity on Gram-negative E. coli between the open and closed forms, in which the antimicrobial activity of the ring-closed isomers for 1b and 3b was 16 times that of the corresponding ring-open isomers. DFT calculations showed that the ring-closed isomers of 1b and 3b presented a rigid "S-type" conformation, which may be conducive to forming more stable complexes with the DNA gyrase of E. coli.

Crystalline Covalent Triazine Frameworks by In†Situ Oxidation of Alcohols to Aldehyde Monomers.

Covalent triazine frameworks (CTFs) with aromatic triazine linkages have recently received increasing interest for various applications because of their rich nitrogen content and high chemical stability. Owing to the strong aromatic C=N bond and high chemical stability, only a few CTFs are crystalline, and most CTFs are amorphous. Herein we report a new general strategy to give highly crystalline CTFs by in situ formation of aldehyde monomers through the controlled oxidation of alcohols. This general strategy allows a series of crystalline CTFs with different monomers to be prepared, which are shown to have higher thermal stability and enhanced performance in photocatalysis as compared with the less crystalline or amorphous CTFs. This open-system approach is very simple and convenient, which presents a potential pathway to large-scale industrial production of crystalline CTFs.

Construction of photoswitchable rotaxanes and catenanes containing dithienylethene fragments.

Mechanically interlocked structures such as rotaxanes and catenanes provide a novel backbone for constructing functional materials with unique structural characteristics. In this study, we have designed and synthesized a series of photoswitchable rotaxanes and catenanes containing photochromic dithienylethene fragments using a template-directed clipping approach based on dynamic imine chemistry. Their structures have been confirmed using NMR, mass spectrometry and elemental analysis. Investigations into their photoisomerization properties indicated that these dithienylethene-based mechanically interlocked molecules have good reversibility and excellent fatigue resistance upon irradiation with UV or visible light. Interestingly, the mechanically interlocked molecules containing two dithienylethene backbones display around a 2-fold increase in the molar absorption coefficient compared with that of the mono dithienylethene derivative. Furthermore, the introduction of the fluorophore pyrene in the dithienylethene component facilitates these molecules to serve as fluorescent switches.

Dendritic [2]rotaxanes: synthesis, characterization, and properties.

A series of dendritic ammonium salts have been designed and synthesized. Subsequently, they were used to construct the corresponding [2]rotaxanes by a template-directed clipping approach. Unusually, two unsymmetrical dendritic [2]rotaxanes containing fluorophore (pyrene units) were also obtained; their optical properties, such as UV/vis absorption and fluorescence, were measured. The results indicate that these two rotaxanes possess stronger intermolecular interaction in the solid state than in solution. As a result, solutions of high concentration readily formed the excimer. These special rotaxanes might be applied in dynamic fluorescence-reponsive materials, and the rotaxane structure will also be used as a strategy to adjust the aggregated behaviors of fluorescent molecules.

Chemical control of photochromism and a multiresponsive molecular switch based on a diarylethene derivative containing naphthol.

A photochemically inactive diarylethene derivative with a naphthol group bridging through the imidazole unit (DIN) was synthesized to characterize a multifunctional switch. Upon stimulation by radiation (UV and visible light), the target diarylethene derivative DIN was not photochemically inactive but photo-active, it could be photo-converted into a keto compound. Moreover, the photochromic reaction of DIN was observed when it was stimulated by the addition of acid or methylation. Fluorescence quenching and the bathochromic effect occurred when DIN was stimulated by the addition of copper ions and a base, respectively. Its optical properties could be regulated by various chemical stimuli. Thus, it can potentially be utilized as a multiresponsive molecular switch.

Photo-responsive [2]catenanes: synthesis and properties.

A series of novel dithienylethene-based macrocycles containing ammonium moieties has been synthesized. They have been employed as templates to construct [2]catenanes showing their photoisomerization properties by means of a dynamic covalent chemistry approach. Their structures have been reliably confirmed by NMR, ESI-MS or MALDI-QTOF-MS, and elemental analysis, and their energy-minimized structures of open- and closed-ring isomers were investigated by the theoretical calculation. Investigation of the photochromic properties of these dithienylethene-based [2]catenanes has revealed good reversibility and excellent fatigue resistance upon irradiation with UV or visible light. Notably, formation of the [2]catenanes enhanced the photochromic properties compared with those of the corresponding macrocyclic ammonium salt, implying that the non-covalently interacting components of the [2]catenanes could affect the photoswitchable properties.

Construction of rotacatenanes using rotaxane and catenane frameworks.

The construction of novel mechanically interlocked structures has become a topic of great current interest due to the requirements of topology and their potential application in molecular machines and devices. Rotaxane and catenane as two basic topological frameworks can be used to construct the fused structures. In the current investigation, a class of novel ammonium backbones were synthesized. The ammonium group incorporated in the linear part of the molecule can be used for templating rotaxane formation while the macrocyclic part of the molecule can be used for templating catenane formation. Accordingly, they were subjected to dynamic covalent chemistry, resulting in a series of [n]rota[n]catenane structures (n = 2, 3, 4). In this process, the N-hetero crown ethers were installed on ammonium template sites of linear and macrocyclic components all at once by a template-directed clipping reaction. The results showed that these novel building blocks could be assembled with high efficiencies. Finally, this investigation provides a foundation for future studies aimed at constructing complicated integrated structures or polymers with multiple topological units.

B cell lymphoma 6 promotes hepatocellular carcinoma progression by inhibiting tumor infiltrating CD4+T cell cytotoxicity through ESM1.

Immunotherapy exhibited potential effects for advanced hepatocellular carcinoma, unfortunately, the clinical benefits are often countered by cancer adaptive immune suppressive response. Uncovering the mechanism how cancer cells evade immune surveillance would help to develop new immunotherapy approaches and combination therapy. In this article, by analyzing the transcriptional factors which modulate the differentially expressed genes between T cell infiltration high group and low group, we identified oncoprotein B cell lymphoma 6 (BCL6) suppresses the infiltration and activation of tumor infiltrating T lymphocytes, thus correlated with poorer clinical outcome. By using antibody deletion experiment, we further demonstrated that CD4+T cells but not CD8+T cells are the main lymphocyte population suppressed by Bcl6 to promote HCC development. Mechanistically, BCL6 decreases cancer cell expression of pro-inflammatory cytokines and T lymphocyte chemokines such as IL6, IL1F6, and CCL5. Moreover, BCL6 upregulates Endothelial cell-specific molecule 1 (ESM1) to inhibit T lymphocyte recruitment and activation possibly through ICAM-1/LFA-1 signaling pathway. Our findings uncovered an unappreciated paracrine mechanism how cancer cell-derived BCL6 assists cancer cell immune evasion, and highlighted the role of CD4+T cells in HCC immune surveillance.

One-photon three-dimensional printed fused silica glass with sub-micron features.

The applications of silica-based glass have evolved alongside human civilization for thousands of years. High-precision manufacturing of three-dimensional (3D) fused silica glass objects is required in various industries, ranging from everyday life to cutting-edge fields. Advanced 3D printing technologies have emerged as a potent tool for fabricating arbitrary glass objects with ultimate freedom and precision. Stereolithography and femtosecond laser direct writing respectively achieved their resolutions of ~50 µm and ~100 nm. However, fabricating glass structures with centimeter dimensions and sub-micron features remains challenging. Presented here, our study effectively bridges the gap through engineering suitable materials and utilizing one-photon micro-stereolithography (OµSL)-based 3D printing, which flexibly creates transparent and high-performance fused silica glass components with complex, 3D sub-micron architectures. Comprehensive characterizations confirm that the final material is stoichiometrically pure silica with high quality, defect-free morphology, and excellent optical properties. Homogeneous volumetric shrinkage further facilitates the smallest voxel, reducing the size from 2.0 × 2.0 × 1.0 µm3 to 0.8 × 0.8 × 0.5 µm3. This approach can be used to produce fused silica glass components with various 3D geometries featuring sub-micron details and millimetric dimensions. This showcases promising prospects in diverse fields, including micro-optics, microfluidics, mechanical metamaterials, and engineered surfaces.

Central memory CD4+ T cells play a protective role against immune checkpoint inhibitor-associated myocarditis.

AIMS: The widespread use of immune checkpoint inhibitors (ICIs) has demonstrated significant survival benefits for cancer patients and also carry the risk of immune-related adverse events (irAEs). ICIs-associated myocarditis is a rare and serious adverse event with a high mortality rate. Here, we explored the mechanism underlying ICIs-associated myocarditis. METHODS AND RESULTS: Using the peripheral blood of patients with ICIs therapy and ICIs treated mice with transplanted tumors, we dissect the immune cell subsets and inflammatory factors associated with myocarditis. Compared to the control group, patients with myocarditis after ICIs therapy showed an increase in NK cells and myeloid cells in peripheral blood, while T cells significantly decreased. Among T cells, there was an imbalance of CD4/CD8 ratio in the peripheral blood of myocarditis patients, with a significant decrease in central memory CD4+ T (CD4+ TCM) cells. RNA-Seq revealed that CD4+ TCM cells in myocarditis patients were an immunosuppressive cell subset, which highly express the immunosuppressive factor IL4I1. To elucidate the potential mechanism of the decrease in CD4+ TCM cells, protein array was performed and revealed that several inflammatory factors gradually increased with the severity of myocarditis in the myocarditis group, such as IL-1B/CXCL13/CXCL9, while the myocardial protective factor IL-15 decreased. Correlation analysis indicated a positive correlation between IL-15 and CD4+ TCM cells, with high expression of IL-15 receptor IL15RA. Furthermore, in vivo studies using an anti-PDL1 antibody in a mouse tumor model indicated a reduction in CD4+ TCM cells and an increase in CD8+ TEMRA cells, alongside evidence of cardiac fibrosis. Conversely, combining anti-PDL1 antibody treatment with IL-15 led to a resurgence of CD4+ TCM cells, a reduction in CD8+ TEMRA cells, and a mitigated risk of cardiac fibrosis. CONCLUSIONS: Our data highlight CD4+ TCM cells as a crucial role in cardiac protection during ICIs therapy. IL-15, IL4I1 and CD4+ TCM cells can serve as therapeutic targets to reduce ICIs-associated myocarditis in cancer patients.

Effect of Eccentricity Difference on the Mechanical Response of Microfluidics-Derived Hollow Silica Microspheres during Nanoindentation.

Hollow microspheres as the filler material of syntactic foams have been adopted in extensive practical applications, where the physical parameters and their homogeneity have been proven to be critical factors during the design process, especially for high-specification scenarios. Based on double-emulsion droplet templates, hollow microspheres derived from microfluidics-enabled soft manufacturing have been validated to possess well-controlled morphology and composition with a much narrower size distribution and fewer defects compared to traditional production methods. However, for more stringent requirements, the innate density difference between the core-shell solution of the double-emulsion droplet template shall result in the wall thickness heterogeneity of the hollow microsphere, which will lead to unfavorable mechanical performance deviations. To clarify the specific mechanical response of microfluidics-derived hollow silica microspheres with varying eccentricities, a hybrid method combining experimental nanoindentation and a finite element method (FEM) simulation was proposed. The difference in eccentricity can determine the specific mechanical response of hollow microspheres during nanoindentation, including crack initiation and the evolution process, detailed fracture modes, load-bearing capacity, and energy dissipation capability, which should shed light on the necessity of optimizing the concentricity of double-emulsion droplets to improve the wall thickness homogeneity of hollow microspheres for better mechanical performance.

Oral phages prophylaxis against mixed Escherichia coli O157:H7 and Salmonella Typhimurium infections in weaned piglets.

Escherichia coli and Salmonella Typhimurium are the main pathogens of diarrhea in weaned piglets. The prevention of bacterial diarrhea in weaned piglets by phage is rarely reported. We conducted this study to evaluate the preventive effect of phages on mixed Escherichia coli and Salmonella Typhimurium infections in weaned piglets. A novel phage named NJ12 was isolated by using Salmonella Typhimurium SM022 as host bacteria and characterized by electron microscopy, genomic analysis and in vitro bacteriostatic activity. Phage NJ12 and a previously reported phage EP01 were microencapsulated with sodium alginate to make phage cocktail. Microencapsulated phage cocktail and PBS (Phosphate buffer solution) were used to piglets the phage and phage-free group through oral administration before bacterial infection 2 h, respectively. Piglets of the phage and phage-free group were consumed with feed contaminated with 6 mL (108CFU/mL) Escherichia coli O157:H7 GN07 (GXEC-N07) and 6 mL (108CFU/mL) SM022 every day for seven consecutive days. The results showed that piglets in the phage-free group had more severe diarrhea, larger decreased average weight gain and higher levels of neutrophils compared with piglets in phage group. Meanwhile, piglets in the phage-free group had higher load of SM022 and GN07 in jejunal tissue and more severe intestinal damage compared with piglets in group phage in vivo. In addition, oral administration phage can significant decreased the relative abundance of Enterobacteriaceae but hardly repaired the changes of diversity and composition of gut microbiota caused by the mixed infection of SM022 and GN07. This implies that phage used as a feed additive have a marvelous preventive effect on bacterial diarrhea during weaning of piglets.