Pressure-Induced Diels-Alder Reactions in C6 H6 -C6 F6 Cocrystal towards Graphane Structure.

Pressure-induced polymerization (PIP) of aromatics is a novel method for constructing sp3 -carbon frameworks, and nanothreads with diamond-like structures were synthesized by compressing benzene and its derivatives. Here by compressing a benzene-hexafluorobenzene cocrystal (CHCF), H-F-substituted graphane with a layered structure in the PIP product was identified. Based on the crystal structure determined from the in situ neutron diffraction and the intermediate products identified by gas chromatography-mass spectrum, we found that at 20 GPa CHCF forms tilted columns with benzene and hexafluorobenzene stacked alternatively, and leads to a [4+2] polymer, which then transforms to short-range ordered H-F-substituted graphane. The reaction process involves [4+2] Diels-Alder, retro-Diels-Alder, and 1-1' coupling reactions, and the former is the key reaction in the PIP. These studies confirm the elemental reactions of PIP of CHCF for the first time, and provide insight into the PIP of aromatics.

Synergistic Antimicrobial Activity of Colistin in Combination with Rifampin and Azithromycin against Escherichia coli Producing MCR-1.

The lack of available antibiotics is a global public health problem due to the emergence of antimicrobial resistance. Effective therapeutic regimens are urgently needed against Escherichia coli strains that produce the colistin resistance gene mcr-1 and to inhibit the emergence of resistance. In this study, we assessed the antimicrobial activity of a series of concentrations of colistin-based combinations with rifampin and/or azithromycin against three strains of Escherichia coli, including colistin-resistant isolate MZ1501R, isolate HE1704R that produces MCR-1, and colistin-susceptible isolate MZ1509S Experiments were conducted with a medium inoculum of ∼107 CFU/ml over 48 h. Subsequently, the in vivo therapeutic effect was investigated using a neutropenic mouse thigh infection model. Almost all monotherapies showed unsatisfactory antibacterial activity against E. coli isolates producing MCR-1. In contrast, colistin in combination with rifampin or azithromycin resulted in an obvious decrease in the bacterial burden albeit with regrowth. More obviously, synergistic antimicrobial activity of colistin-based triple-combination therapy with rifampin and azithromycin was observed, resulting in a rapid and exhaustive antibacterial effect. In vivo treatments confirmed these findings, where mean decreases of 0.38 to 0.90 log10 CFU and 1.27 to 1.78 log10 CFU were noted after 24 h and 48 h of treatment, respectively, against colistin-resistant E. coli strains when 5 mg/kg of body weight of colistin was combined with rifampin and azithromycin. Colistin-based combinations with rifampin and azithromycin provide a more active therapeutic regimen than monotherapy or colistin-based double combinations against E. coli producing MCR-1.

Pressure-Induced Polymerization of Acetylene: Structure-Directed Stereoselectivity and a Possible Route to Graphane.

Geometric isomerism in polyacetylene is a basic concept in chemistry textbooks. Polymerization to cis-isomer is kinetically preferred at low temperature, not only in the classic catalytic reaction in solution but also, unexpectedly, in the crystalline phase when it is driven by external pressure without a catalyst. Until now, no perfect reaction route has been proposed for this pressure-induced polymerization. Using in situ neutron diffraction and meta-dynamic simulation, we discovered that under high pressure, acetylene molecules react along a specific crystallographic direction that is perpendicular to those previously proposed. Following this route produces a pure cis-isomer and more surprisingly, predicts that graphane is the final product. Experimentally, polycyclic polymers with a layered structure were identified in the recovered product by solid-state nuclear magnetic resonance and neutron pair distribution functions, which indicates the possibility of synthesizing graphane under high pressure.

Fast and simple preparation of iron-based thin films as highly efficient water-oxidation catalysts in neutral aqueous solution.

Water oxidation is the key step in natural and artificial photosynthesis for solar-energy conversion. As this process is thermodynamically unfavorable and is challenging from a kinetic point of view, the development of highly efficient catalysts with low energy cost is a subject of fundamental significance. Herein, we report on iron-based films as highly efficient water-oxidation catalysts. The films can be quickly deposited onto electrodes from Fe(II) ions in acetate buffer at pH 7.0 by simple cyclic voltammetry. The extremely low iron loading on the electrodes is critical for improved atom efficiency for catalysis. Our results showed that this film could catalyze water oxidation in neutral phosphate solution with a turnover frequency (TOF) of 756 h(-1) at an applied overpotential of 530 mV. The significance of this approach includes the use of earth-abundant iron, the fast and simple method for catalyst preparation, the low catalyst loading, and the large TOF for O2 evolution in neutral aqueous media.

Pressure-Induced Hydrogen Transfer in 2-Butyne via a Double CH···π Aromatic Transition State.

Hydrogen transfer (H-transfer) is an important elementary reaction in chemistry and bioscience. It is often facilitated by the hydrogen bonds between the H-donor and acceptor. Here, at room temperature and high pressure, we found that solid 2-butyne experienced a concerted two-in-two-out intermolecular CH···π H-transfer, which initiated the subsequent polymerization. Such double H-transfer goes through an aromatic Hückel six-membered ring intermediate state via intermolecular CH···π interactions enhanced by external pressure. Our work shows that H-transfer can occur via the CH···π route in appropriate conformations under high pressure, which gives important insights into the H-transfer in solid-state hydrocarbons.

Scalable High-Pressure Synthesis of sp2-sp3 Carbon Nanoribbon via [4 + 2] Polymerization of 1,3,5-Triethynylbenzene.

Pressure-induced polymerization of aromatics is an effective method to construct extended carbon materials, including the diamond-like nanothread and graphitic structures, but the reaction pressure of phenyl is typically around 20 GPa and too high to be applied for large-scale preparation. Here by introducing ethynyl to phenyl, we obtained a sp2-sp3 carbon nanoribbon structure by compressing 1,3,5-triethynylbenzene (TEB), and the reaction pressure of phenyl was successfully decreased to 4 GPa, which is the lowest reaction pressure of aromatics at room temperature. Using experimental and theoretical methods, we figured out that the ethynylphenyl of TEB undergoes [4 + 2] dehydro-Diels-Alder (DDA) reaction with phenyl upon compression at an intermolecular C···C distance above 3.3 Å, which is much longer than those of benzene and acetylene. Our research suggested that the DDA reaction between ethynylphenyl and phenyl is a promising route to decrease the reaction pressure of aromatics, which allows the scalable high-pressure synthesis of nanoribbon materials.

Pressure Gradient Squeezing Hydrogen out of MnOOH: Thermodynamics and Electrochemistry.

Pressure of gigapascal (GPa) is a robust force for driving phase transitions and chemical reactions with negative volume change and is intensely used for promoting combination/addition reactions. Here, we find that the pressure gradient between the high-pressure region and the ambient-pressure environment in a diamond anvil cell is an even stronger force to drive decomposition/elimination reactions. A pressure difference of tens of GPa can "push" hydrogen out from its compounds in the high-pressure region to the environment. More importantly, in transition metal hydroxides such as MnOOH, the protons and electrons of hydrogen can even be separated via different conductors, pushed out by the high pressure, and recombine outside under ambient conditions, producing continuous current. A pressure-gradient-driven battery is hence proposed. Our investigation demonstrated that a pressure gradient is a special and powerful force to drive decomposition and electrochemical reactions.

Crystalline Fully Carboxylated Polyacetylene Obtained under High Pressure as a Li-Ion Battery Anode Material.

Substituted polyacetylene is expected to improve the chemical stability, physical properties, and combine new functions to the polyacetylene backbones, but its diversity is very limited. Here, by applying external pressure on solid acetylenedicarboxylic acid, we report the first crystalline poly-dicarboxylacetylene with every carbon on the trans-polyacetylene backbone bonded to a carboxyl group, which is very hard to synthesize by traditional methods. The polymerization is evidenced to be a topochemical reaction with the help of hydrogen bonds. This unique structure combines the extremely high content of carbonyl groups and high conductivity of a polyacetylene backbone, which exhibits a high specific capacity and excellent cycling/rate performance as a Li-ion battery (LIB) anode. We present a completely functionalized crystalline polyacetylene and provide a high-pressure solution for the synthesis of polymeric LIB materials and other polymeric materials with a high content of active groups.

Experimental and Simulation Insights into Local Structure and Luminescence Evolution in Eu3+-Doped Nanocrystals under High Pressure.

Tremendous effort has been devoted to tailoring structure-correlated properties, especially for the luminescence of lanthanide nanocrystals (NCs). High pressure has been demonstrated as a decent way to tune the performance of lanthanide NCs; however, little attention has been paid to the local structure evolution accompanied by extreme compression and its effect on luminescence. Here, we tailor the local structure around lanthanide ions with pressure in ß-NaGdF4 NCs, in which Eu3+ ions were doped as optical probes for local structure for the sensitive electric dipole transition. As the pressure increases, the intensity ratio of the 5D0 → 7F2 to 5D0 → 7F1 transition decreases monotonically from 2.04 to 0.81, implying a higher local symmetry around Eu3+ ions from compression. In situ X-ray diffraction demonstrates that the sample maintains the hexagonal structure up to 33.5 GPa, and density functional theory calculations reveal the tendency of the local structure to vary under high pressure.

Pressure-stabilized divalent ozonide CaO3 and its impact on Earth's oxygen cycles.

High pressure can drastically alter chemical bonding and produce exotic compounds that defy conventional wisdom. Especially significant are compounds pertaining to oxygen cycles inside Earth, which hold key to understanding major geological events that impact the environment essential to life on Earth. Here we report the discovery of pressure-stabilized divalent ozonide CaO3 crystal that exhibits intriguing bonding and oxidation states with profound geological implications. Our computational study identifies a crystalline phase of CaO3 by reaction of CaO and O2 at high pressure and high temperature conditions; ensuing experiments synthesize this rare compound under compression in a diamond anvil cell with laser heating. High-pressure x-ray diffraction data show that CaO3 crystal forms at 35 GPa and persists down to 20 GPa on decompression. Analysis of charge states reveals a formal oxidation state of -2 for ozone anions in CaO3. These findings unravel the ozonide chemistry at high pressure and offer insights for elucidating prominent seismic anomalies and oxygen cycles in Earth's interior. We further predict multiple reactions producing CaO3 by geologically abundant mineral precursors at various depths in Earth's mantle.

Room Temperature Zero Thermal Expansion in a Cubic Cobaltite.

Zero thermal expansion (ZTE) materials are highly desired in modern industries where high-precision processing is necessary. However, ZTE materials in pure form are extremely rare. The most widely used are Invar alloys, where the ZTE is intimately associated with spontaneous magnetic ordering, known as the magnetovolume effect (MVE). Despite tremendous studies, there is still no consensus on the microscopic origin of MVE in Invar alloys. Here, we report the discovery of room-temperature isotropic ZTE in a pure-form cobaltite perovskite, A-site disordered La0.5Ba0.5CoO3-x. The temperature window of the anomalous thermal expansion shows large tunability by simply altering the oxygen content, making this material a promising candidate for practical applications. Furthermore, we unveil with compelling experimental evidence that the ZTE originates from an isostructural transition between antiferromagnetic large-volume phase and ferromagnetic small-volume phase, which might shed light on the MVE in Invar alloys.

Unveiling a Novel, Cation-Rich Compound in a High-Pressure Pb-Te Binary System.

Because of the common oxidation states of group IV elements (+2 or +4) and group VI elements (-2), 1:1 and 1:2 are two typical stoichiometries found in the IV-VI compounds. Particularly, in the Pb-Te binary system, the 1:1 stoichiometric PbTe is believed to be the only stable compound. Herein, using evolutionary algorithms, density functional theory, a laser-heated diamond anvil cell, and synchrotron X-ray diffraction experiments, we discovered a novel Pb-Te compound with an unexpected stoichiometry of 3:2 above 20 GPa. This tetragonal Pb3Te2 is the one of the very few cation-rich compounds that has ever been discovered in the entire IV-VI binary system. Further analyses based on electron density distribution, electron localization function, and Bader charge have shown that this newly discovered compound has a mixed character of chemical bonding with a decreased ionicity. By further calculating the electron-phonon interaction, Pb3Te2 is predicted to exhibit a superconducting transition at low temperatures. The discovery of Pb3Te2 paves the way for further explorations of other novel cation-rich IV-VI group compounds.

Phase transitions and chemical reactions of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine under high pressure and high temperature.

Octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) is one of the most important energetic materials. Investigations on its phase transitions and chemical reactions under extreme conditions are very important to understand the explosion process and design new energetic materials. By using a diamond anvil cell combined with in situ Raman, IR and X-ray diffraction techniques up to a pressure of ∼40 GPa, we found that ß-HMX undergoes four reversible phase transitions without any chemical reaction under external pressure at room temperature. Isostructural phase transitions emerge around 5 GPa (ζ-HMX) and 10-13 GPa (ε-HMX), and another two phases emerge at 16 GPa (η-HMX) and 27 GPa (ϕ-HMX). The unit cells of ζ-HMX and ε-HMX were determined as a = 6.215 Å, b = 10.417 Å, c = 8.272 Å, ß = 124.88°, P21/c at 6.2 GPa and a = 6.130 Å, b = 9.846 Å, c = 8.258 Å, ß = 125.06°, P21/c at 12.6 GPa, respectively. The crystal structures of ß, ζ, and ε-HMX were obtained by Rietveld refinement, based on which the rotations of NO2 groups were found to be related to the phase transition at 5 GPa. Additionally, HMX decomposes at 8.7 GPa and 300 °C. Carbon dioxide, hydroxyl, imino and hydroxyimino groups were detected in the IR spectrum, which indicates that the reaction contains a hydrogen transfer process. Our investigation uncovers the structural variation of ß-HMX under external pressure and identifies the decomposition products under extreme conditions, which provides new insight to understand the detonation process of energetic materials.

Epidemiology of Haemophilus parasuis isolates from pigs in China using serotyping, antimicrobial susceptibility, biofilm formation and ERIC-PCR genotyping.

BACKGROUND: Haemophilus parasuis is a commensal organism of the upper respiratory tract of healthy pigs and causes high morbidity and mortality in piglets. The aim of this study was to investigate the epidemiology of H. parasuis in China from 2014 to 2017. METHODS: We characterized 143 H. parasuis isolates by serotyping, antimicrobial susceptibility, biofilm formation and with enterobacterial repetitive intergenic consensus-polymerase chain reaction (ERIC-PCR) assays. RESULTS: Serotyping revealed serovar 5 as the most prevalent (26.6%) followed by serovars 4 (22.4%), 7 (9.1 %), 13 (6.3%), 12 (5.6 %), and non-typeable (8.4%). In a panel of 23 antimicrobials, the minimum inhibitory concentration 50% (MIC50) were in the range of 0.25-16 µg/mL and MIC90 were 2->512 µg/mL. A total of 99 isolates of H. parasuis (69.2%) were able to form biofilms and 59.6% (59/99) performed weak biofilm-forming ability. ERIC-PCR revealed a very heterogeneous pattern with 87 clusters. DISCUSSION: These H. parasuis isolates showed a high serovar and genotypic lineage diversity, different abilities to form biofilms and a high degree of genetic diversity. Biofilm formation was related to antimicrobial susceptibility but there were no statistically significant associations between the antimicrobial susceptibility and either the serovars or the ERIC-PCR clusters. This study showed a high prevalence of high-MIC H. parasuis strains and suggests the need for a continuous surveillance of clinical isolates of H. parasuis.

A crystalline AlPO4-5 intermediate: designed synthesis, structure, and phase transformation.

AlPO4-5 is the most extensively studied material in exploring the crystallization mechanism of aluminophosphate molecular sieves, and it can be synthesized using 4-dimethylaminopyridine (DMAP) as an organic structure-directing agent (OSDA). Achieving the AlPO4-5 intermediate in the crystalline form would be of great importance and significance for this purpose. In this study, we proposed a concept that by carefully regulating the synthesis conditions, crystalline alumimophosphate intermediates could be rationally prepared. A crystalline AlPO4-5 intermediate, (C7H11N2)2(H3O)(Al3P4O16)·(H2O)2.5 (1), was, therefore, synthesized by significantly increasing the amounts of orthophosphoric acid and DMAP. The intermediate 1 consists of alternating organic DMAP and inorganic [Al3P4O16]3- layers with abundant hydrogen bonds and can transform to the AlPO4-5 framework upon heating in air or through a steam-assisted conversion (SAC) method. To unravel the role of DMAP in the transformation, pure AlPO4-5 (2) was also synthesized by altering the synthesis conditions. The supramolecular assembly templating (SAT) effects of DMAP in 1 and 2 were verified via fluorescence spectra. Thus, the π-π stacking interactions between the DMAP molecules and the abundant hydrogen bonds between the adjacent layers are considered to be important for the phase transformation of 1. This crystalline intermediate would promote the understanding of the crystallization mechanism in the system of aluminophosphate molecular sieves.

Large Magnetovolume Effect Induced by Embedding Ferromagnetic Clusters into Antiferromagnetic Matrix of Cobaltite Perovskite.

Materials that show negative thermal expansion (NTE) have significant industrial merit because they can be used to fabricate composites whose dimensions remain invariant upon heating. In some materials, NTE is concomitant with the spontaneous magnetization due to the magnetovolume effect (MVE). Here the authors report a new class of MVE material; namely, a layered perovskite PrBaCo2 O5.5+x (0 ≤ x ≤ 0.41), in which strong NTE [ß ≈ -3.6 × 10-5 K-1 (90-110 K) at x = 0.24] is triggered by embedding ferromagnetic (F) clusters into the antiferromagnetic (AF) matrix. The strongest MVE is found near the boundary between F and AF phases in the phase diagram, indicating the essential role of competition between the F-clusters and the AF-matrix. Furthermore, the MVE is not limited to the PrBaCo2 O5.5+x but is also observed in the NdBaCo2 O5.5+x . The present study provides a new approach to obtaining MVE and offers a path to the design of NTE materials.

An Iron-based Film for Highly Efficient Electrocatalytic Oxygen Evolution from Neutral Aqueous Solution.

An ultrathin Fe-based film was prepared by electrodeposition from an Fe(II) solution through a fast and simple cyclic voltammetry method. The extremely low Fe loading of 12.3 nmol cm(-2) on indium tin oxide electrodes is crucial for high atom efficiency and transparence of the resulted film. This Fe-based film was shown to be a very efficient electrocatalyst for oxygen evolution from neutral aqueous solution with remarkable activity and stability. In a 34 h controlled potential electrolysis at 1.45 V (vs NHE) and pH 7.0, impressive turnover number of 5.2 × 10(4) and turnover frequency of 1528 h(-1) were obtained. To the best of our knowledge, these values represent one of the highest among electrodeposited catalyst films for water oxidation under comparable conditions. The morphology and the composition of the catalyst film was determined by scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray, and X-ray photoelectron spectroscopy, which all confirmed the deposition of Fe-based materials with Fe(III) oxidation state on the electrode. This study is significant because of the use of iron, the fast and simple cyclic voltammetry electrodeposition, the extremely low catalyst loading and thus the transparency of the catalyst film, the remarkable activity and stability, and the oxygen evolution in neutral aqueous media.