RESUMO
Robust, ultrathin, and environmental-friendliness papers that synergize high-efficiency electromagnetic interference (EMI) shielding, personal thermal management, and wearable heaters are essential for next-generation smart wearable devices. Herein, MXene nanocomposite paper with a nacre-like structure for EMI shielding and electrothermal/photothermal conversion is fabricated by vacuum filtration of Ti3 C2 Tx MXene and modified sawdust. The hydrogen bonding and highly oriented structure enhance the mechanical properties of the modified sawdust/MXene composite paper (SM paper). The SM paper with 50 wt% MXene content shows a strength of 23 MPa and a toughness of 13 MJ·M-3 . The conductivity of the SM paper is 10 195 S·m-1 , resulting in an EMI shielding effectiveness (SE) of 67.9 dB and a specific SE value (SSE/t) of 8486 dB·cm2 ·g-1 . In addition, the SM paper exhibits excellent thermal management performance including high light/electro-to-thermal conversion, rapid Joule heating and photothermal response, and sufficient heating stability. Notably, the SM paper exhibits low infrared emissivity and distinguished infrared stealth performance, camouflaging a high-temperature heater surface of 147-81 °C. The SM-based e-skin achieves visualization of Joule heating and realizes human motions monitoring. This work presents a new strategy for designing MXene-based wearable devices with great EMI shielding, artificial intelligence, and thermal management applications.
RESUMO
With the continuous advancement of communication technology, the escalating demand for electromagnetic shielding interference (EMI) materials with multifunctional and wideband EMI performance has become urgent. Controlling the electrical and magnetic components and designing the EMI material structure have attracted extensive interest, but remain a huge challenge. Herein, we reported the alternating electromagnetic structure composite films composed of hollow metal-organic frameworks/layered MXene/nanocellulose (HMN) by alternating vacuum-assisted filtration process. The HMN composite films exhibit excellent EMI shielding effectiveness performance in the GHz frequency (66.8 dB at Ka-band) and THz frequency (114.6 dB at 0.1-4.0 THz). Besides, the HMN composite films also exhibit a high reflection loss of 39.7 dB at 0.7 THz with an effective absorption bandwidth up to 2.1 THz. Moreover, HMN composite films show remarkable photothermal conversion performance, which can reach 104.6 °C under 2.0 Sun and 235.4 °C under 0.8 W cm-2, respectively. The unique micro- and macro-structural design structures will absorb more incident electromagnetic waves via interfacial polarization/multiple scattering and produce more heat energy via the local surface plasmon resonance effect. These features make the HMN composite film a promising candidate for advanced EMI devices for future 6G communication and the protection of electronic equipment in cold environments.
RESUMO
Extracellular polymeric substances (EPSs) in excess sludge of wastewater treatment plants are valuable biopolymers that can act as recovery materials. However, effectively concentrating EPSs consumes a significant amount of energy. This study employed novel energy-saving pressure-free dead-end forward osmosis (DEFO) technology to concentrate various biopolymers, including EPSs and model biopolymers [sodium alginate (SA), bovine serum albumin (BSA), and a mixture of both (denoted as BSA-SA)]. The feasibility of the DEFO technology was proven and the largest concentration ratios for these biopolymers were 94.8 % for EPSs, 97.1 % for SA, 97.8 % for BSA, and 98.4 % for BSA-SA solutions. An evaluation model was proposed, incorporating the FO membrane's water permeability coefficient and the concentrated substances' osmotic resistance, to describe biopolymers' concentration properties. Irrespective of biopolymer type, the water permeability coefficient decreased with increasing osmotic pressure, remained constant with increasing feed solution (FS) concentration, increased with increasing crossing velocity in the draw side, and showed little dependence on draw salt type. In the EPS DEFO concentration process, osmotic resistance was minimally impacted by osmotic pressure, FS concentration, and crossing velocity, and monovalent metal salts were proposed as draw solutes. The interaction between reverse diffusion metal cations and EPSs affected the structure of the concentrated substances on the FO membrane, thus changing the osmotic resistance in the DEFO process. These findings offer insights into the efficient concentration of biopolymers using DEFO.
Assuntos
Osmose , Biopolímeros/química , Alginatos/química , Soroalbumina Bovina/química , Permeabilidade , Pressão Osmótica , Água/química , Bovinos , Membranas Artificiais , Animais , Purificação da Água/métodosRESUMO
Nanocellulose, as the star nanomaterial in carbohydrate polymers, has excellent mechanical properties, biodegradability, and easy chemical modification. However, further practical applications of nanocellulose are limited by their inadequate functionalization. Metal-organic frameworks (MOFs), as the star nanomaterial in functional polymers, have a large surface area, high porosity, and adjustable structure. The collaboration of nanocellulose and MOFs is a desirable strategy to make composites especially interesting for multifunctional and multi-field applications. What sparks will be produced by the collaboration of two-star nanomaterials? In this review article, we highlight an up-to-date overview of nanocellulose-based MOFs composites. The sewage treatment, gas separation, energy storage, and biomedical applications are mainly summarized. Finally, the challenges and research trends of nanocellulose-based MOFs composites are prospected. We hope this review may provide a valuable reference for the development and applications of carbohydrate polymer composites soon.
Assuntos
Estruturas Metalorgânicas , Nanoestruturas , Polímeros , PorosidadeRESUMO
With the rapid development of wearable devices and integrated systems, protection against electromagnetic waves is an issue. For solving the problems of poor flexibility and a tendency to corrode traditional electromagnetic interference (EMI) shielding materials, two-dimensional (2D) nanomaterial MXene was employed to manufacture next-generation EMI shielding materials. Vacuum-assisted filtration combined with the liquid nitrogen prefreezing strategy was adopted to prepare flexible MXene/cellulose nanofibers (CNFs) composite aerogel film with unique cellular structure. Here, CNFs were employed as the reinforcement, and such a cellular structure design can effectively improve the shielding effectiveness (SE). In particular, the composite shows an outstanding EMI SE of 54 dB. Furthermore, the MXene/CNFs composite aerogel film exhibited prominent and steady photothermal conversion ability, which could obtain the maximum equilibrium temperature of 89.4 °C under an 808 nm NIR laser. Thus, our flexible composite aerogel film with appealing cellular construction holds great promise for wearable EMI shielding materials and heating applications in a cold and complex practical environment.
RESUMO
The remediation of heavy crude oil spills is a global challenge because frequent crude oil spills cause long-term damage to local living beings and marine ecosystems. Herein, a solar-driven and Joule-driven self-heated aerogel were developed as an all-weather adsorbent to efficiently absorb crude oil by obviously decreasing the viscosity of crude oil. The cellulose nanofiber (CNF)/MXene/luffa (CML) aerogel was fabricated via a simple freeze-drying method using CNF, MXene, and luffa as raw materials, and then coated with a layer of polydimethylsiloxane (PDMS) to make it hydrophobic and further increase oil-water selectivity. The aerogel can quickly reach 98 °C under 1 sun (1.0 kW/m2), which remains saturated temperature after 5 times photothermal heating/cooling cycles, indicating that the aerogel has great photothermal conversation capability and stability. Meanwhile, the aerogel can also rapidly rise to 110.8 °C with a voltage of 12 V. More importantly, the aerogel achieved the highest temperature of 87.2 °C under outdoor natural sunlight, providing a possibility for promising applications in practical situations. The remarkable heating capability enables the aerogel to decrease the viscosity of crude oil substantially and increase the absorption rate of crude oil by the physical capillary action. The proposed all-weather aerogel design provides a sustainable and promising solution for cleaning up crude oil spills.
Assuntos
Luffa , Nanofibras , Petróleo , Nanofibras/química , Celulose/química , Ecossistema , Tempo (Meteorologia)RESUMO
Interfacial solar steam generation (ISSG) is considered to be an attractive technique to address the water shortage. However, developing a sustainable thermal management, salt rejection, and excellent mechanical strength ISSG device for long-term stability desalination is still a challenge. Herein, a biomass ISSG device with superb mechanical properties was prepared by introducing a luffa sponge as the skeleton and constructing the MXene/cellulose nanofibers (CNFs) aerogels via freeze-drying. The Janus MXene-decorated CNFs/luffa (JMCL) aerogels integrated the multifunction of fast water transport, good thermal management, and efficient photothermal conversion in a single module, to achieve high-efficiency desalination. 3D Janus structure endowed the JMCL aerogel with opposite wettability, which is feasible to construct the localized photothermal generation and self-floating. The mechanical strength of JMCL aerogels is 437 times that of MXene/CNFs aerogels. The JMCL aerogels delivered a water evaporation rate of 1.40 kg m-2h-1 and an efficiency of 91.20% under 1 sun illumination. The excellent salt resistance during 24 h working and long-term solar vapor generation of up to 28 days were achieved. The multifunctional JMCL aerogels with 3D Janus structure offer new insights for developing good durability and eco-friendly biopolymer-based steam generators.
RESUMO
Conductive hydrogels have good prospects in the fields of flexible electronic devices and artificial intelligence due to their biocompatibility, durability, and functional diversity. However, the process of hydrogel polymerization is time-consuming and energy-consuming, and freezing at zero temperature is inevitable, which seriously hinders its applications and working life. Herein, zwitterionic conductive hydrogels with self-adhesive and antifreeze properties were prepared in one minute by introducing two-dimensional (2D) MXene nanosheets into the autocatalytically enhanced system composed of tannic acid-modified cellulose nanofibers and zinc chloride. The system has strong environmental applicability (-60 to 40 °C), good stretchability (ductility ≈ 980%), durable adhesion (even after 30 days of exposure to air), and strong electrical conductivity (20 °C, 30 mS cm-1). By virtue of these advantages, the prepared zwitterionic hydrogels can be developed into flexible strain sensors to monitor large human movements and subtle physiological signals over a wide temperature range and to capture signals from handwriting and voice recognition. In addition, multiple flexible sensors can be assembled into a three-dimensional (3D) array, which can detect the magnitude and spatial distribution of strain or force. These results demonstrate that the prepared zwitterionic hydrogels have promising applications in the fields of medical monitoring and artificial intelligence.
RESUMO
The purposes of this study were to explore the influences of different cellulose types on the cellulose/CaCO3 composites, which were synthesized via the microwave-assisted method by using alkali extraction cellulose and microcrystalline cellulose, respectively. Experimental results demonstrated that the types of cellulose played an important role in the microstructure and morphologies of the cellulose/CaCO3 composites. The composites consisted of cellulose and pure phase CaCO3 (calcite). The sample synthesized using microcrystalline cellulose had better crystallinity than that of the sample using alkali extraction cellulose. The cellulose fibers and CaCO3 particles were observed using alkali extraction cellulose. However, using microcrystalline cellulose instead of alkali extraction cellulose, the cellulose with irregular shape and CaCO3 microspheres were obtained. Therefore, choosing appropriate cellulose types is very important for the formation of cellulose/CaCO3 composites. Furthermore, the Raman spectra of the cellulose/CaCO3 composites were also researched.
RESUMO
Remediation of crude oil spills is a great challenge owing to the poor mobility and high viscosity of crude oil. Herein, a porous polydimethylsiloxane@wood sponge/MXene (PDMS@WSM) with outstanding compressibility and hydrophobic/lipophilic ability was demonstrated as crude oil absorbent. The surface temperature of PDMS@WSM could quickly rise to 80 °C with a working voltage of 4 V and to 66 °C under simulated sunlight irradiation of 1.5 KW m-2, respectively. Due to the excellent Joule heating and photothermal conversion effect, the PDMS@WSM displayed maximum adsorption capacity of 11.2×105 g m-3 within 6 min. The PDMS@WSM showed preferable reusability and cycle stability because of its brilliant compressibility. Moreover, the oil-collecting device based on PDMS@WSM could continuously collect crude oil spills, achieving an active collection of 25 mL crude oil within 150 s. Therefore, the porous PDMS@WSM absorbent exhibited great potential for crude oil spills remediation, energy regulation, and desalination of hypersaline water.
Assuntos
Poluição por Petróleo , Petróleo , Calefação , Poluição por Petróleo/análise , Titânio , MadeiraRESUMO
The photothermal materials have a broad range of applications in crude oil spills treatment, desalination, and photothermal therapy. However, the rational construction of aerogels with exceptional photothermal performance is highly desired yet still challenging. Herein, a class of stable aerogels comprised of molybdenum disulfide (MoS2) nanoflowers and cellulose nanofibers (CNFs) was fabricated, affording extraordinary light-to-heat energy conversion capability. Benefiting from the intercalated porous structure, the resultant cellulose nanofibers/molybdenum disulfide (CNF/MoS2) aerogels deliver an ultrahigh temperature output up to 260.4 °C with near infrared (NIR) laser power densities of 0.8 W cm-2. Remarkably, when NIR laser power density increased to 1.0 W cm-2, the aerogels began to burn, achieving the superhigh surface temperature of â¼ 690 °C. The combustion process of CNF/MoS2 composite aerogels was evaluated in detail. Therefore, this work provides experiment evidence and theoretical basis for the rational applications of photothermal materials at high temperature in future.
Assuntos
Molibdênio , Nanofibras , Celulose/química , Dissulfetos/química , Molibdênio/química , Nanofibras/químicaRESUMO
Calcium-containing cellulose-based composites possess the advantages of high mechanical strength, excellent osteoconductivity, biocompatibility, biodegradation, and bioactivity, which represent a promising application system in the biomedical field. Calcium-containing cellulose-based composites have become the hotspot of study of various biomedical fields. In this mini-review article, the synthesis of calcium-containing cellulose-based composites is summarized via a variety of methods such as the biomimetic mineralization method, microwave method, co-precipitation method, hydrothermal method, freeze-drying method, mechanochemical reaction method, and ultrasound method. The development on the fabrication, properties, and applications of calcium-containing cellulose-based composites is highlighted. The as-existed problems and future developments of cellulose-based composites are provided. It is expected that calcium-containing cellulose-based composites are the ideal candidate for biomedical application.
RESUMO
In recent years, faced with the improvement of environmental quality problems, cellulose and cellulose-based (nano) composites have attracted great attention as adsorbents. In this review article, we first report the recent progress of modification and functionalization of cellulose adsorbents. In addition, the adsorbents produced by the modification and functionalization of carboxymehyl cellulose are also introduced. Moreover, the cellulose-based (nano) composites as adsorbents are reviewed in detail. Finally, the development prospect of cellulose and cellulose-based (nano) composites is studied in the field of the environment. In this review article, a critical comment is given based on our knowledge. It is believed that these biomass adsorbents will play an increasingly important role in the field of the environment.
RESUMO
Sensitive strain sensors have attracted more attention due to their applications in health monitoring and human-computer interaction. However, the problems existing in conventional hydrogels, such as inherent brittleness, freezing at low temperature, low toughness, and water evaporation, have greatly hindered the practical applications. In order to solve the above problems, herein, we designed dual network multifunctionality organohydrogels using polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA) covalent cross-linking polymer as the first network, the bacterial celluloses (BCs) and calcium chloride by ligand binding as the second network. The prepared organohydrogels showed good conductivity and sensitivity over a wide temperature range (-20 â¼ 40 â), and maintained long-term stability (>15 days) in the air. In addition, the dynamic combination of BCs-Ca2 + and hydrogen bonds in the binary system further endows the organohydrogels with excellent tensile strength (≈1.0 MPa), tensile strain (≈1300%), toughness (≈6.2 MJ m-3), conductivity (3.4 S m-1), gauge factor (≈1.24), adhesion (≈0.3 MPa), and self-healing properties (self-healing tensile strain to 632%). Therefore, this organohydrogel has potential candidates for flexible electronic skin, motion monitoring, and soft robotics.
Assuntos
Celulose , Dispositivos Eletrônicos Vestíveis , Condutividade Elétrica , Humanos , Hidrogéis , Álcool de PolivinilRESUMO
The soil's rhizosphere is a highly active place where the exchange of substances and information occurs among plants, soils, and microorganisms. The microorganisms involved are crucial to the activities of plant growth and development, metabolism, and reproduction. Fritillaria L. medicinal plants are unique Chinese medicinal ingredients, but the continuous cropping obstacles formed in the artificial planting process is severely harmful to the growth and development of these medicinal plants. In this review, we summarized the current species and distribution of Fritillaria L. in China, and analyzed the changes in microbial diversity (mainly among bacteria and fungi) in the rhizosphere of these plants under long-term continuous cropping. The fungi showed an increasing trend in the soil rhizosphere, resulting in the transition of the soil from the high-fertility "bacterial type" to the low-fertility "fungal type" as planting years increased. Furthermore, the interaction between Fritillaria L. medicinal plants and the rhizosphere microorganisms was reviewed, and promising applications for the rhizosphere microbiome in the cultivation of Fritillaria L. medicinal plants were suggested. It is expected that this review will facilitate the in-depth understanding of rhizosphere microorganisms in the growth, accumulation of active ingredients, and disease control of Fritillaria L.
RESUMO
Tailoring the structure and properties of lignin is an important step toward electrochemical applications. In this study, lignin/polypyrrole (PPy) composite electrode films with microporous and mesoporous structures were designed effectively by electrostatic spinning, carbonization, and in situ polymerization methods. The lignin can not only reduce the cost of carbon fiber but also increase the specific surface area of composite films due to the removal of carbonyl and phenolic functional groups of lignin during carbonization. Besides, the compact three-dimensional (3D) conductive network structures were constructed with PPy particles densely coated on the lignin nanofibers, which was helpful to improve the conductivity and fast electron transfer during the charging and discharging processes. The synthesized lignin carbon fibers/PPy anode materials had good electrochemical performance in 1 M H2SO4 electrolyte. The results showed that, at a current density of 1 A g-1, the lignin carbon nanofibers/PPy (LCNFs/PPy) had a larger specific capacitance of 213.7 F g-1 than carbon nanofibers (CNFs), lignin carbon nanofibers (LCNFs), and lignin/PPy fiber (LPAN/PPy). In addition, the specific surface area of LCNFs/PPy reached 872.60 m2 g-1 and the average pore size decreased to 2.50 nm after being coated by PPy. Therefore, the independent non-binder and self-supporting conductive film is expected to be a promising electrode material for supercapacitors with high performance.
RESUMO
BACKGROUND: Recently, there has been increasing interest in nanomaterials processed using renewable and sustainable resources. Nanocellulose-based materials are of paramount value in the applications of biomedicine owing to their tailorable surface modification, favorable optical transparency, good hydrophilicity, excellent biocompatibility, and outstanding mechanical properties. OBJECTIVE: In the review, the recent advancements of nanocellulose, including cellulose nanofibers (CNFs), cellulose nanocrystals (CNCs), and bacterial cellulose (BC), are summarized, which are promising for biomedical applications. RESULTS: By discussing different forms (one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D)), the superiority of the nanocellulose-based materials with different constructed structures will be clarified for various biomedical applications, such as biosensing, drug delivery, wound dressing, and tissue engineering. CONCLUSION: The challenges and prospects for the future development of nanocellulose- based materials in biomedical applications are also discussed at the end of the review.
Assuntos
Nanopartículas , Nanoestruturas , Celulose , Sistemas de Liberação de Medicamentos , Humanos , HidrogéisRESUMO
Lignin exhibited numerous advantages such as plentiful functional groups, good biocompatibility, low toxicity, and high carbon content, which can be transformed into composites and carbon materials. Lignin-based materials are usually environmentally friendly and low cost, and are widely used in energy storage, environment, electronic devices, and other fields. In this review article, the pretreatment separation methods like hydrothermal process are illustrated briefly, and the properties and categories of technical lignin are introduced. Then, the latest progress of lignin-based composites and lignin-derived carbon materials is summarized. Finally, the current challenges and future developments were suggested based on our knowledge. It is expected that this review paper favored the applications of composites and lignin-derived carbon materials in the future.
RESUMO
Paris polyphylla var. yunnanensis is a kind of biomass resource, which has important medicinal and economical values with a huge market. This review article aims to summarize the recent development of biomass P. polyphylla var. yunnanensis. The genetic diversity and chemical components of biomass P. polyphylla var. yunnanensis were reviewed based on the literature. Both the genetic diversity and genetic structure of biomass P. polyphylla var. yunnanensis were compared by using molecular marker technologies. All the extraction processes, harvest time, and drying methods on the chemical components were summarized in detail. The differences of arbuscular mycorrhizal fungi on the infection rate, diosgenin content, microorganisms, enzyme activities, rhizospheric environment, and endogenous hormones were discussed. This review article is beneficial for the applications of biomass P. polyphylla var. yunnanensis as a biomass resource in the biomedical field.
RESUMO
Hemicellulose is an important component of plant cell walls, which is mainly used in biofuels and bioproducts. The hemicellulose extracted from different plant sources and plant locations has different microstructure and molecule. Wheat straw is an important biomass raw material for the extraction of hemicellulose. The aims of this review are to summary the recent developments and various applications of hemicellulose from wheat straw. The microstructure and molecule of hemicellulose extracted by different methods are comparably discussed. The hemicellulose-based derivatives and composites are also reviewed. Special attention was paid to the applications of hemicellulose such as biofuel production, packaging field, and adsorbent. The problems and developing direction were given based on our knowledge. We expect that this review will put forward to the development and high-value applications of hemicellulose from wheat straw.