Radiographic evaluation of marginal bone levels around implants supporting splinted fixed bridges: A retrospective study on 412 implants.

OBJECTIVES: The effect of the implant position within the prosthesis on bone remodeling is scarcely documented so far. Thus, the aim of the present study was to investigate whether central implants may suffer higher peri-implant marginal bone levels (MBL) compared to laterals in case of fixed splinted bridges supported by ≥ three implants. MATERIALS AND METHODS: Partially edentulous subjects rehabilitated with at least one fixed bridge supported by ≥ three dental implants were enrolled. MBL was assessed radiographically by means of intraoral radiographs acquired with phosphor plates and imported in a dedicated software. MBL was calculated as the distance between the implant platform level and the most coronal visible bone-to-implant contact. A three-level linear mixed effects model was used for investigating the fixed effect of patient-, prosthesis-, and implant-level variables on the MBL. RESULTS: Overall, 90 patients rehabilitated with 130 splinted fixed bridges supported by 412 implants were included. The median follow-up was 136 months. The mean peri-implant MBL resulted statistically significantly higher at central implants if compared to lateral implants (p < .01). The estimated MBL averages for central and external implants were 1.68 and 1.18 mm, respectively. The prosthesis-level variables suggested that a cement-retained bridge was prone to a significant 0.82 mm higher MBL than a screw-retained one. Implant surface showed an association with MBL changes, although less pronounced than implant retention. CONCLUSIONS: In case of ≥3 adjacent implants supporting splinted bridges, central implants were more predisposed to MBL compared to laterals. At the prosthesis level, implants supporting cement-retained bridges were statistically more susceptible to MBL compared to screw-retained ones. Surface characteristics can also influence MBL stability at the implant level.

Oral health-related quality of life in implant-supported rehabilitations: a prospective single-center observational cohort study.

BACKGROUND: Oral Health-Related Quality of Life (OHRQoL) is a comprehensive concept covering daily comfort, self-esteem, and satisfaction with oral health, including functional, psychological, and social aspects, as well as pain experiences. Despite abundant research on OHRQoL related to oral diseases and hygiene, there is limited data on how patients perceive changes after implant-prosthetic rehabilitation. This study aimed to evaluate OHRQoL and aesthetic perception using OHIP-14 and VAS scales respectively, before (baseline-TB), during (provisional prostheses-TP), and after (definitive prostheses-TD) implant-prosthetic rehabilitation. It also explored the impact of biological sex, substitution numbers, and aesthetic interventions on OHRQoL and VAS scores, along with changes in OHIP-14 domains. METHODS: A longitudinal prospective single-center observational cohort study was conducted with patients requiring implant-prosthetic rehabilitation. Quality of life relating to dental implants was assessed through the Italian version of Oral Health Impact Profile-14 (IOHIP-14), which has a summary score from 14 to 70. Patients' perceived aesthetic was analyzed through a VAS scale from 0 to 100. Generalized Linear Mixed Effect Models, Linear Mixed Effect Models, and Friedman test analyzed patient responses. RESULTS: 99 patients (35 males, 64 females) aged 61-74, receiving various prosthetic interventions, were enrolled. Both provisional and definitive prosthetic interventions significantly decreased the odds of a worse quality of life compared to baseline, with odds ratios of 0.04 and 0.01 respectively. VAS scores increased significantly after both interventions, with estimated increases of 30.44 and 51.97 points respectively. Patient-level variability was notable, with an Intraclass Correlation Coefficient (ICC) of 0.43. While biological sex, substitution numbers, and aesthetic interventions didn't significantly affect VAS scores, OHRQoL domains showed significant changes post-intervention. CONCLUSIONS: These findings support the effectiveness of implant-prosthetic interventions in improving the quality of life and perceived aesthetics of patients undergoing oral rehabilitation. They have important implications for clinical practice, highlighting the importance of individualized treatment approaches to optimize patient outcomes and satisfaction in oral health care.

Detection and sensing of oral xenobiotics in edentulous patients rehabilitated with titanium dental implants: Insights from a scoping review.

STATEMENT OF PROBLEM: Titanium has been considered the standard element in implant manufacturing. Recent studies have evaluated the role of titanium as a biological modulator of oral health. However, evidence regarding the association between the release of metal particles and peri-implantitis is lacking. PURPOSE: The purpose of this scoping review was to evaluate the literature regarding the release of metal particles in peri-implant tissues correlated with the methods of detection and the local and systemic implications. MATERIAL AND METHODS: The study was performed in adherence with the Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) guidelines and was registered with the National Institute for Health Research PROSPERO (Submission No. 275576; ID: CRD42021275576). A systematic search was conducted in the Cochrane Central Register of Controlled Trials, EMBASE, MEDLINE via PubMed, Scopus, and Web of Science bibliographic databases, complemented by a manual evaluation. Only in vivo human studies written in the English language and published between January 2000 and June 2022 were included. RESULTS: In total, 10 studies were included according to eligibility criteria. Different tissues and analytic techniques were reported: the characterization technique most used was inductively coupled plasma mass spectrometry. All 10 studies analyzed the release of metal particles in patients with dental implants, continuously detecting titanium. None of the studies reported a significant association between metal particles and biological effects. CONCLUSIONS: Titanium is still considered the material of choice in implant dentistry, despite the detection of metal particles in peri-implant tissues. Further studies are necessary to evaluate the association between analytes and local health or inflammatory status.

Autogenous Chin Block Grafts for Implant-Supported Rehabilitation: A 20-Year Follow-Up Case Series.

The aim of the present study was to analyze the survival and success rates of dental implants placed in atrophic alveolar ridges reconstructed with mandibular symphysis autogenous onlay bone grafts, with a 20-year follow-up. A sample of five patients referred to the authors' department between 2000 and 2001 seeking for an implant-supported fixed rehabilitation. Patients were treated by means of autogenous bone blocks grafted from the mandibular symphysis and covered with bone substitutes (DBB) and a resorbable membrane. Then delayed implants were placed and finally prosthetic restoration was performed. In total, 10 implants placed in 5 patients were evaluated with a follow-up of 20 years. Both implant survival and success rate were 100%. The mean marginal bone loss was 0.32  [[EQUATION]]  0.39 mm (range 0-1.3 mm). Considering the conditions of peri-implant hard and soft tissues, the diagnosis of peri-implant health was made for all the implants included. According to this study, implants placed in alveolar ridges augmented by means of autogenous chin bone grafts showed long-term survival and high success rates. A correct management of peri-implant soft tissues and an accurate prosthetic rehabilitation are also fundamental to obtain the durable success of the treatment.

Can transfer type and implant angulation affect impression accuracy? A 3D in vitro evaluation.

Impression accuracy is fundamental to achieve a passive fit between implants and the superstructure. Three transfer types were tested to evaluate the differences in impression accuracy and their efficiency in case of different implant angles. A master model with four implant analogues placed at 0°, 15° and 35° was used. 27 impressions were taken with three different types of impression coping: closed tray technique coping (CT), open tray technique coping (COT) and telescopic open tray coping (TOT). The impressions were poured. Analogues were matched with scan bodies to be scanned and exported in STL. An implant bar was designed from each STL and another one from the master model. A comparison between these bars was obtained. Linear and angular measurements for every type of coping were calculated for different angulations. The collected data were analyzed with ANOVA test (95% of confidence). Student's t test showed a significative discrepancy (p ≤ 0.001) on linear and angular measurements on Δx, Δy, Δz with different transfer types as well as diverse implant positioning angles (p ≤ 0.001). Within the limitations of this study, it can be concluded that the coping type and the implants divergence may be significant parameters influencing the impression accuracy.

Influence of Bone Quality, Drilling Protocol, Implant Diameter/Length on Primary Stability: An In Vitro Comparative Study on Insertion Torque and Resonance Frequency Analysis.

The aim of this study was to evaluate the influence of bone quality, drilling technique, implant diameter, and implant length on insertion torque (IT) and resonance frequency analysis (RFA) of a prototype-tapered implant with knife-edge threads. The investigators hypothesized that IT would be affected by variations in bone quality and drilling protocol, whereas RFA would be less influenced by such variables. The investigators implemented an in vitro experiment in which a prototype implant was inserted with different testing conditions into rigid polyurethane foam blocks. The independent variables were: bone quality, drilling protocol, implant diameter, and implant length. Group A implants were inserted with a conventional drilling protocol, whereas Group B implants were inserted with an undersized drilling protocol. Values of IT and RFA were measured at implant installation. IT and RFA values were significantly correlated (Pearson correlation coefficient: 0.54). A multivariable analysis showed a strong model. Higher IT values were associated with drilling protocol B vs A (mean difference: 71.7 Ncm), implant length (3.6 Ncm increase per mm in length), and substrate density (0.199 Ncm increase per mg/cm3 in density). Higher RFA values were associated with drilling protocol B vs A (mean difference: 3.9), implant length (1.0 increase per mm in length), and substrate density (0.032 increase per mg/cm3 in density). Implant diameter was not associated with RFA or IT. Within the limitations of an in vitro study, the results of this study suggest that the studied implant can achieve good level of primary stability in terms of IT and RFA. A strong correlation was found between values of IT and RFA. Both parameters are influenced by the drilling protocol, implant length, and substrate density. Further studies are required to investigate the clinical response in primary stability and marginal bone response.

Influence of the implant-abutment connection on the ratio between height and thickness of tissues at the buccal zenith: a randomized controlled trial on 188 implants placed in 104 patients.

BACKGROUND: To compare tissue response to two implant systems, featuring internal hexed connections with different designs. METHODS: Patients enrolled in this randomized controlled trial were assigned to two groups. In Group 1, patients were treated with implants with a 5° conical internal hexed connection (Anyridge®, MegaGen, South Korea). In Group 2, patients were treated with implants with an internal hexed connection (Core®, Kristal, Italy). After implant placement and a provisionalisation period of 12 months, impressions were taken, stone casts were poured and digitised with a desktop scanner (D700®, 3Shape, Copenhagen, Denmark). In a digital environment, for each fixture, two values were collected at the buccal zenith: the height of the peri-implant mucosa (mucosal height; MH), calculated from the vestibular shoulder of the implant analogue to the upper gingival margin of the supra-implant tissue; and the width of the peri-implant mucosa (mucosal thickness; MT), calculated from the vestibular shoulder of the analogue to the external mucosa point perpendicular to the implant major axis. The mean and standard deviation for MH and MT, as well as their ratios, were calculated for each group; the sectors in which the implants were placed were also considered. Finally, correlation between MH, MT, connection type and sector was assessed by Pearson's correlation coefficient, with significance level set at 0.05, and a confidence interval (CI) set at 95%. RESULTS: Data deriving from 188 implants placed in 104 patients were evaluated. The mean MH values were 3.32 (± 0.12) and 2.70 (± 0.16) mm for Groups 1 and 2, respectively. The mean MT values were 4.37 (± 0.16) and 3.93 (± 0.18) mm for Groups 1 and 2, respectively. Group 1 showed higher MH and MT values and a better ratio (1.50 ± 0.88) than Group 2 (1.81 ± 1.20). The MH, MT and MH/MT ratio were significantly influenced both by sector (p = 0.015) and group (p = 0.047). CONCLUSIONS: Within the limits of this study, the 5° connection implants supported a more extended tissue height and thickness at the buccal zenith, and a better ratio between them. TRIAL REGISTRATION: This study was retrospectively registered in Clinicaltrials.gov, with number NCT04160689, dated 13/11/2019.

Xenograft Combined with a Mixture of Polynucleotides and Hyaluronic Acid (PNs-HA) for Horizontal Alveolar Bone Regeneration: Clinical and Histologic Assessments in a Case Series.

The present case series aims to investigate the use of polynucleotides mixed with hyaluronic acid (PNs-HA) in the form of gel to promote bone regeneration in horizontal alveolar defects. Overall, 6 adult patients underwent localized horizontal guided bone regeneration by means of xenogeneic bone substitute and a resorbable barrier with a staged approach. The graft consisted in a mixture of deproteinized bovine bone mineral (DBBM) particles and PNs-HA gel in a 3:1 ratio, respectively. The material was covered by a resorbable collagen membrane fixed with pins to the underlying bone. Implant placement was performed after 5 months. Healing proceeded uneventfully, and, upon re-entry, the graft appeared well vascularized and firmly attached to the recipient bone. Histologically, the regenerated bone appeared highly mineralized, well-organized in lamellae and totally embedding the residual granules of the biomaterial. Histomorphometric evaluations revealed that newly formed bone occupied on average 41.2% ± 12.4% of the analysed samples. Linear measurements performed on CBCT scans yielded an overall linear horizontal bone gain of 4.91 ± 0.88 mm. These data suggest that a mixture of DBBM and PNs-HA can be safely used to promote bone regeneration in case of horizontal alveolar defects.

Correlation between Accuracy in Computer-Guided Implantology and Peri-Implant Tissue Stability: A Prospective Clinical and Radiological Pilot Study.

The present pilot study was designed by hypothesizing a possible correlation between lack of accuracy in implant placement and peri-implant hard and soft tissue health. A total of five patients underwent computer-guided implant surgery and full-arch immediate loading between 2013 and 2014. They subsequently underwent postoperative cone-beam computed tomography (CBCT). After a follow-up of 5 years, all patients were recalled for a clinical-radiographic evaluation of peri-implant health status. The mean linear deviation was 0.5 ± 0.2 mm at the implant's head and 0.6 ± 0.2 mm at the implant's apex, while the mean angular deviation of the long axis was 2.8° ± 1.2°. A mean marginal bone loss (MBL) of 1.16 ± 0.94 mm and 2.01 ± 1.76 mm was observed after 1 and 5 years of follow-up, respectively. At 5 years, the mean peri-implant probing depth (PPD) was 4.09 ± 1.44 mm, 66.6% of the evaluated implants showed peri-implant bleeding on probing (BOP), keratinized mucosa (KM) was <2 mm in 48.4% of cases, and mucosal recession (REC) ≥ 1 mm was assessed in 45.4% of the included implants. A negative correlation was observed between bucco-palatal/lingual linear inaccuracy and MBL, PPD, BOP, and KM.

The efficacy of a porcine collagen matrix in keratinized mucosa width augmentation: a 10-year follow-up clinical prospective study.

PURPOSE: The aim of the present study was to evaluate the long-term effectiveness of a xenogeneic collagen matrix (CM) in pre-prosthetic augmentation of the keratinized mucosa width (KMW) at implant sites. METHODS: All of the patients with localized implant-supported rehabilitation previously treated with vestibuloplasty and KMW augmentation with a non-cross-linked porcine CM were recalled. KMW was measured clinically in an apico-coronal direction from the mucogingival junction to the mucosal margin at the prosthetic zenith of each crown. Measurements were performed clinically by means of a PCP-UNC15 periodontal probe and rounded to the nearest mm. KMW values recorded at 1 year, 5 and 10 years from the soft tissue augmentation procedure were compared using a one-way repeated-measures ANOVA with Bonferroni multiple comparison post-hoc analysis. The level of significance was set at 0.05. RESULTS: Measurements were conducted on 13 patients. All implants were in function with no signs of biological complications. All except one implant site showed KMW ≥ 2 mm. KMW decreased significantly from 1 year (3.33 ± 1.11 mm) to 5 years (2.77 ± 0.92 mm) (p = 0.001), and finally remained stable from 5 to 10 years (3.2 ± 0.99 mm) (p = 0.607). From a visual aspect, peri-implant soft tissues were characterized by a good texture and color blending compared to the adjacent teeth, highlighting good integration of the remodeled tissues and stability of the esthetic result. CONCLUSIONS: The use of a CM in pre-prosthetic soft tissue augmentation at implant sites has proven to be effective in obtaining and maintaining at least 2 mm of KMW around dental implants over a follow-up of 10 years.

Computer Aided Full Arch Restoration by Means of One-Piece Implants and Stackable Guide: A Technical Note.

This technical note aims to present a recently developed computer-guided protocol characterized by titanium-reinforced stackable surgical guides during post-extractive implant placement and subsequent immediate loading. A full maxillary edentulism was rehabilitated with one-piece implants, starting from a pre-existing removable denture. 3D digital scans of the removable denture and upper and lower arches were performed. On this basis, a prototype with ideal esthetic and functional outcomes was realized and replicated into a custom-made radiological stent with markers. The superimposition of STL and DICOM files allowed virtual planning of one-piece implants in the ideal prosthetically driven position. The stackable guides, composed of a fixed base template and additional removable components, were then realized. The fixed template, initially secured with anchor pins to the bone, was no longer removed. The removable components, which were screwed to the base template, were used to perform implant surgery and immediate prosthetic loading. No surgical complications occurred, the implants achieved a minimum insertion torque of 35 Ncm, and immediate prosthetic loading was performed. The base template allowed for the maintenance of a fixed reference during the entire workflow, improving the transition between the digital project, the surgical procedure, and the prosthetic rehabilitation.

Polydeoxyribonucleotides Pre-Clinical Findings in Bone Healing: A Scoping Review.

AIM: Polydeoxyribonucleotide (PDRN) is a chain-like polymer derived from DNA. Recent in vitro and animal studies have showcased the beneficial impacts of PDRN on the process of bone mending, whether used on its own or in conjunction with other substances that aid in regeneration. This scoping review aims to synthesize the current understanding of how PDRNs influence bone healing. MATERIALS AND METHODS: The studies included in the screening procedure were randomized controlled clinical trials (RCTs), both retrospective and prospective case-control studies, as well as in vitro and in vivo investigations. Articles were sourced from PubMed (MEDLINE), Scopus, EMBASE, Web of Science, and Google Scholar electronic databases using the following MeSH terms: (polydeoxyribonucleotide) and (bone) and (regeneration). RESULTS: Initially, 228 articles were identified. Following the review process, a total of eight studies were ultimately examined. Among these, two were confined to laboratory studies, five were conducted on living organisms, and one encompassed both evaluations on living organisms and in vitro assessments. A descriptive qualitative approach was employed to present the data extracted from the studies that were included. CONCLUSIONS: PDRN has the potential to enhance the process of bone healing and the quantity of newly generated bone when combined with grafting materials. Future clinical studies are warranted to ascertain the appropriate clinical application of PDRN based on the dosage under consideration.

Compound Odontoma Associated with Dentigerous Cyst Incidentally Detected in an Adult Patient: Tomography and Histological Features.

Odontoma is the most common benign odontogenic tumor of epithelial and mesenchymal origin. The standard treatment involves a conservative approach. While this procedure is generally well accepted and tolerated, some difficulties may arise in case of odontomas associated with cystic lesions. In general, the expansive nature of cystic lesions requires their surgical excision, different from isolated nonsymptomatic odontomas that can be monitored radiographically. However, to the best of our knowledge, there is scarce evidence currently available reporting on the presence of odontoma-associated cystic lesions in the oral cavity. Therefore, the present case report is aimed at describing the diagnostic clinical, radiological, and histological features together with the surgical management of a dentigerous cyst associated with a compound odontoma. Following surgical removal of the lesion, no recurrence was observed after 12 months of follow-up.

Evaluation of Breaking Force of Different Suture Materials Used in Dentistry: An In Vitro Mechanical Comparison.

The success of surgical procedures is strictly related to the biomechanical properties of the suture. Mechanical comparisons are scarcely reported in the literature, so the purpose of the present study was to evaluate and compare the mechanical behavior of different sutures commonly used in oral surgery in terms of traction resistance. Sutures made of eight different materials were analyzed: silk (S), polyglycolide-co-caprolactone (PGCL), polypropylene (PP), rapid polyglycolide (rPGA), standard polyglycolide (PGA), polyamide (PA), polyester (PE), and polyvinylidene fluoride (PVDF). For each material, three different sizes were tested: 3-0, 4-0, and 5-0. The breaking force of each suture was assessed with a uniaxial testing machine after being immersed in artificial saliva at 37 °C. The outcomes analyzed were the breaking force, the needle-thread detachment breaking-point and the node response after forward-reverse-forward (FRF) tying when subjected to a tensile force. The 3-0 rPGA provided the maximum resistance, while the lowest value was recorded for the 5-0 PGCL. In general, 3-0 and 4-0 gauges showed non-statistically significant differences in terms of needle-thread detachment. The highest needle-thread detachment was found for the 3-0 PGA, whereas the lowest value was observed for the 5-0 PGCL. After tying the knot with an FRF configuration, the thread that showed the highest resistance to tension was the 3/0 silk, while the thread with the lowest resistance was the 5/0 silk. These data should be considered so that the operator is aware of as many aspects as possible on the behavior of various materials to ensure successful healing.

Therapeutic Strategies in the Management of Nonresorbable Membrane and Titanium Mesh Exposures Following Alveolar Bone Augmentation: A Systematic Scoping Review.

PURPOSE: The exposure of nonresorbable membranes following alveolar bone augmentation is one of the most frequently occurring complications. This review aimed to investigate the treatments that can be adopted to manage the exposure of polytetrafluoroethylene-based membranes (PTFE-ms) and titanium meshes (TMs) and their outcomes. MATERIALS AND METHODS: Two independent reviewers electronically and manually searched the EMBASE, PubMed/MEDLINE, Scopus, and Cochrane bibliographic databases to retrieve pertinent articles available between January 2000 and March 2021. Only human studies describing the type of treatment and the soft tissue outcome following exposure of PTFE-ms or TMs were included. RESULTS: Overall, 11 articles in the PTFE-ms group and 24 in the TM group were included for data analysis. Results indicated that, in both groups, two distinct therapeutic strategies are mostly applied in case of exposure, namely, pharmacologic and mechanical treatments. Other options have been identified seldomly. Statistically significant evidence of an association between the type of barrier membrane and the exposure rate (28.7% vs 38.5% for TMs and PTFE-ms, respectively; P = .019) and between the type of exposed device and the treatment outcome in terms of removal rate following therapy (11.9% and 44.4% for TMs and PTFE-ms, respectively; P < .001) was noted. CONCLUSION: In both groups, chlorhexidine applications and meticulous plaque control may lead to improved healing conditions after exposure. Surgical removal of the exposed portion can be considered to promote secondary intention healing. The beneficial effects of systemic antibiotics could not be demonstrated in the management of the exposure but should be evaluated in case of graft infection.

Latest Findings of the Regenerative Materials Application in Periodontal and Peri-Implant Surgery: A Scoping Review.

Regenerative dentistry represents a therapeutic modern approach involving biomaterials and biologics such as mesenchymal stem cells. The role of regenerative dentistry is promising in all branches of dentistry, especially in periodontology and implantology for the treatment of bony defects around teeth and implants, respectively. Due to the number of different materials that can be used for this purpose, the aim of the present review is to evidence the regenerative properties of different materials both in periodontitis and peri-implantitis as well as to compare their efficacy. Clinical trials, case-control studies, cross-sectional studies, and cohort studies have been considered in this review. The outcome assessed is represented by the regenerative properties of bone grafts, barrier membranes, and biological materials in the treatment of intrabony and furcation defects, peri-implantitis sites, alveolar ridge preservation, and implant site development. Based on the studies included, it can be stated that in the last years regenerative materials in periodontal and peri-implant defects treatments have shown excellent results, thus providing valuable support to surgical therapy. To achieve optimal and predictable results, clinicians should always consider factors like occlusal load control, prevention of microbial contamination, and wound dehiscence. Further evidence is required about the use of enamel matrix derivative in alveolar ridge preservation, as well as of stem cells and bone morphogenetic proteins-2 in furcation defects and peri-implantitis sites. Considering the high amount of research being conducted in this field, further evidence is expected to be obtained soon.

Behavior of Soft Tissue around Platform-Switched Implants and Non-Platform-Switched Implants: A Comparative Three-Year Clinical Study.

To verify the influence of platform-switching (PS) on soft tissue behavior by comparing the soft tissue stability around implants with and without PS, during three years of follow-up. The study included patients treated with fixed dentures supported by implants with an internal connection. The radiographic distance between the first bone-to-implant contact (FBIC) and the implant shoulder was assessed. Additionally, the presence of keratinized facial mucosa and the prosthetic crown height (TH) were monitored for three years from the delivery of the definitive crown. These parameters were measured for two different groups: platform-switched implants in the PS group and non-platform-switched (NPS) implants in the NPS group. Seventy-seven implants were considered in the statistical analysis. After three years, the overall FBIC mean value was 0.31 ± 1.00 mm. However, the mean FBIC was 0.66 ± 0.97 mm for the NPS group and -0.05 ± 0.91 mm for the PS group. Moreover, a mean recession of 0.54 ± 1.39 mm was measured for the NPS group, whereas a mean coronal migration of 0.17 ± 0.95 mm was measured for the PS group. A significant correlation was also found between the presence of PS and ΔTH (p ≤ 0.01) over the three years of follow-up. The absence or presence of platform-switching would appear to affect the tendency of the gingival buccal margin towards recession or creeping. Additionally, implant-abutment platform-switching seems to help prevent peri-implant soft tissue recession over time when compared to implants without PS.

Comparative Risk of Bleeding of Anticoagulant Therapy with Vitamin K Antagonists (VKAs) and with Non-Vitamin K Antagonists in Patients Undergoing Dental Surgery.

OBJECTIVES: A wide variety of approaches have been proposed to manage anticoagulant drugs in patients undergoing dental surgery; vitamin K antagonists and novel direct oral anticoagulants have been used. The present study aims to explore the existing evidence concerning the management of patients in anticoagulant therapy undergoing oral surgery procedures and to give suggestions related to peri- and post-operative measures. MATERIALS AND METHODS: A comprehensive search of databases was conducted to identify studies that evaluated the relationship between direct oral anticoagulants and dental procedures. The present scoping review was realized in adherence with the Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) guidelines. The publications varied from randomized controlled trials (RCT) to cohort trials. Only articles written in English language and published between 2000 to 2020 were screened. The studies were included if discussing the management of a patient in anticoagulant therapy (warfarin or direct oral anticoagulants) scheduled for tooth extraction. RESULTS: 33 studies were selected and included in the qualitative review. Nineteen considered anticoagulant therapy with warfarin, six considered anticoagulant therapy with new oral anticoagulants and eight compared patients taking warfarin with patients taking direct oral anticoagulants. CONCLUSIONS: No case of extractive surgery should alter the posology of the drug: thromboembolic risks derived from discontinuation are heavier than hemorrhagic risks. CLINICAL RELEVANCE: direct oral anticoagulants are safer in terms of bleeding and manageability and bleeding episodes are manageable with local hemostatic measures.

Marginal Bone Resorption Around Dental Implants Placed in Alveolar Socket Preserved Sites: A 5 Years Follow-up Study.

AIM: The present study evaluated the clinical and radiological stability of hard and soft tissues following alveolar socket preservation (ASP) procedure with a follow-up of 5 year from implant insertion. MATERIALS AND METHODS: The initial sample consisted of seven patients who underwent single tooth extraction and ASP procedure by means of demineralized bovine bone mineral particles covered with a porcine-derived non-cross-linked collagen matrix (CM). Each patient received a submerged single implant in the healed site. Mesial and distal peri-implant marginal bone resorption (MBR) rates were assessed radiographically at 1 year (T 1) and 5 years (T 2) after implant placement (baseline value). RESULTS AND STATISTICS: No dropouts occurred up to 5 years. At T 1, the MBR was 0.08 ± 0.16 mm at the mesial aspect and 0.1 ± 0.12 mm at the distal aspect. This difference was not statistically significant (P = 0.867). At T 2, the mesial MBR was 0.15 ± 0.17 mm and the distal MBR was 0.11 ± 0.14 mm, with a non-statistically significant difference (P = 0.532). Therefore, no statistically significant differences were detected comparing mesial and distal MBR at any time point. With respect to the intra-group comparisons, no differences were observed comparing the different study periods within each variable. Indeed, the comparison between T 0, T 1 and T 2 was non-statistically significant at both mesial (P = 0.06) and distal (P = 0.06) aspects. After 5 years, the volume of the soft tissues appeared clinically well maintained with a natural aspect around dental implants and adjacent teeth. CONCLUSION: ASP using demineralized bovine bone mineral in combination with CM proved to be an effective technique to maintain stable dimensional volumes of both hard and soft tissues.