The Combined Influence of Infant Carrying Method and Motherhood on Gait Mechanics.

Postpartum mothers are susceptible to lumbopelvic pain which may be exacerbated by loading, like carrying their infant in arms and with baby carriers. Nulliparous women carrying infant mannequins may biomechanically mimic mother-infant dyad, but this has not been studied. The purpose of our study was to investigate biomechanical differences of 10 mothers carrying their infants and 10 nulliparous women carrying infant mannequins under 3 gait conditions: carrying nothing, carrying in arms, and carrying in a baby carrier (babywearing). Spatiotemporal gait parameters, peak ground reaction forces and impulses, and lower extremity and trunk kinematics were collected using motion capture and force plates and compared using a mixed 2 × 3 (parity × condition) analysis of variance (α ≤ .05). The largest differences occurred between carrying conditions: carrying in arms or babywearing increased vertical and anteroposterior ground reaction forces, trunk extension, ankle dorsiflexion, and hip and knee flexion. Kinematic differences were identified between arms and babywearing conditions. Together this suggests alterations in joint loading for both groups. Our study also contributes a novel understanding of postpartum health by demonstrating alterations in step time, anterior forces, and ankle and knee mechanics, suggesting that during gait, mothers carrying their own infants choose different propulsive strategies than nulliparous women carrying mannequins.

Kinematic Performance of Medial Pivot Total Knee Arthroplasty.

BACKGROUND: Total knee arthroplasty (TKA) implants have continued to evolve to accommodate new understandings of knee mechanics. The medial-pivot implant is a newer design, which is intended to limit anterior-posterior translation in the medial compartment while allowing lateral compartment translation. However, evidence for a generalized medial-pivot characteristic across all activities is limited. The purpose of the study was to quantify and compare in vivo knee joint kinematics using high-speed stereo radiography during activities of daily living in patients who have undergone a TKA with a cruciate sacrificing medial-pivot implant to age-matched and sex-matched native controls. METHODS: Fifteen participants (7 patients, 4 women, mean age 70 years and 8 nonsymptomatic controls, 4 women, mean age 64 years) performed 6 functional tasks in high-speed stereo radiography: deep-knee lunge, chair rise, step down, gait, gait with 90° turn, and seated knee extension. Translational differences between groups (surgical versus control) were assessed for the medial and lateral condyle, while pivot location was normalized to subject-specific tibial plateau geometry. RESULTS: The surgical cohort displayed a more constrained medial condyle that provided greater stability of the medial compartment and did not result in the paradoxical anterior translation at mid-flexion angles during weight-bearing activities, but was associated with less condylar translation than native knees. Additionally, the transverse tibial pivot location occurs most commonly in the middle third of the tibial plateau and secondarily on the medial third. CONCLUSIONS: Some variability in pivot location occurs between activities and is more in nonsymptomatic, native knee controls.

Inter-Rater Reliability of Clinical Testing for Laxity After Knee Arthroplasty.

BACKGROUND: The clinical examination for laxity has been considered a mainstay in evaluation of the painful knee arthroplasty, especially for the diagnosis of instability. More than 10 mm of anterior-posterior (AP) translation in flexion has been described as important in the diagnosis of flexion instability. The inter-observer reliability of varus/valgus and AP laxity testing has not been tested. METHODS: Ten subjects with prior to total knee arthroplasty (TKA) were examined by 4 fellowship-trained orthopedic knee arthroplasty surgeons. Each surgeon evaluated each subject in random order and was blinded to the results of the other surgeons. Each surgeon performed an anterior drawer test at 30 and 90 degrees of flexion and graded the instability as 0-5 mm, 5-10 mm or >10 mm. Varus-valgus testing was also graded. Motion capture was used during the examination to determine the joint position and estimate joint reaction force during the examination. RESULTS: Inter-rater reliability (IRR) was poor at 30 and 90 degrees for both the subjective rater score and the measured AP laxity in flexion (k = 018-0.22). Varus-valgus testing similarly had poor reliability. Force applied by the rater also had poor IRR. CONCLUSION: Clinical testing of knee laxity after TKA has poor reliability between surgeons using motion analysis. It is unclear if this is from differences in examiner technique or from differences in pain or quadriceps function of the subjects. Instability after TKA should not be diagnosed strictly by clinical testing and should involve a complete clinical assessment of the patient.

Changes in Mediolateral Postural Control Mechanisms During Gait After Total Knee Arthroplasty.

BACKGROUND: Patients who have total knee arthroplasty (TKA) likely suffer from decreased postural stability because of postoperative changes in musculoskeletal structure and loss of proprioception. The purpose of this experimental biomechanical study was to determine if patients who have TKA improve their dynamic postural control during walking after TKA as compared with before TKA. The secondary purpose was to assess changes in postural control between post-TKA patients and healthy controls. METHODS: Twenty-three patients who had primary knee osteoarthritis scheduled to undergo unilateral or bilateral TKA were prospectively enrolled. Each patient was tested at 3 months, 6 months, and 12 months after TKA. Ten healthy controls matched for age, sex, and body mass index were selected from a database of previous healthy volunteers without knee osteoarthritis. Ten Vicon cameras and four AMTI force platforms were used to collect the marker and center of pressure (COP) data while participants performed gait. RESULTS: Initial improvement in the double stance ratio was found by 6 months after TKA compared with before TKA. Patients showed improved postural control as evidenced by a faster mediolateral COP velocity and decreased double stance ratio at 12-month post-TKA compared with pre-TKA (P < .05). However, patients who underwent TKA exhibited limited ability to maintain consistent COP movement during walking with increased variability in COP parameters as compared with controls (P < .05). CONCLUSION: Patients exhibited improvement in dynamic postural control after TKA with time, but had higher variability in COP parameters during gait than controls. It is possible that therapy aimed to improve proprioceptive balance after TKA may improve dynamic postural control.

Validated Computational Framework for Evaluation of In Vivo Knee Mechanics.

Dynamic, in vivo evaluations of knee mechanics are important for understanding knee injury and repair, and developing successful treatments. Computational models have been used with in vivo experiments to quantify joint mechanics, but they are typically not predictive. The current study presents a novel integrated approach with high-speed stereo radiography, musculoskeletal modeling, and finite element (FE) modeling for evaluation of subject-specific, in vivo knee mechanics in a healthy subject performing a seated knee extension and weight-bearing lunge. Whole-body motion capture, ground reaction forces, and radiography-based kinematics were used to drive musculoskeletal and predictive FE models for load-controlled simulation of in vivo knee mechanics. A predictive simulation of knee mechanics was developed in four stages: (1) in vivo measurements of one subject performing a lunge and a seated knee extension, (2) rigid-body musculoskeletal modeling to determine muscle forces, (3) FE simulation of knee extension for knee-ligament calibration, and (4) predictive FE simulation of a lunge. FE models predicted knee contact and ligament mechanics and evaluated the impact of cruciate ligament properties on joint kinematics and loading. Calibrated model kinematics demonstrated good agreement to the experimental motion with root-mean-square differences of tibiofemoral flexion-extension <3 deg, internal-external <4 deg, and anterior-posterior <2 mm. Ligament reference strain and attachment locations were the most critical properties in the calibration process. The current work advances previous in vivo knee modeling through simulation of dynamic activities, modeling of subject-specific knee behavior, and development of a load-controlled knee model.

Lumbar Intervertebral Kinematics During an Unstable Sitting Task and Its Association With Standing-Induced Low Back Pain.

People developing transient low back pain during standing have altered control of their spine and hips during standing tasks, but the transfer of these responses to other tasks has not been assessed. This study used video fluoroscopy to assess lumbar spine intervertebral kinematics of people who do and do not develop standing-induced low back pain during a seated chair-tilting task. A total of 9 females and 8 males were categorized as pain developers (5 females and 3 males) or nonpain developers (4 females and 5 males) using a 2-hour standing exposure; pain developers reported transient low back pain and nonpain developers did not. Participants were imaged with sagittal plane fluoroscopy at 25 Hz while cyclically tilting their pelvises anteriorly and posteriorly on an unstable chair. Intervertebral angles, relative contributions, and anterior-posterior translations were measured for the L3/L4, L4/L5, and L5/S1 joints and compared between sexes, pain groups, joints, and tilting directions. Female pain developers experienced more extension in their L5/S1 joints in both tilting directions compared with female nonpain developers, a finding not present in males. The specificity in intervertebral kinematics to sex-pain group combinations suggests that these subgroups of pain developers and nonpain developers may implement different control strategies.

Influence of Component Geometry on Patellar Mechanics in Posterior-Stabilized Rotating Platform Total Knee Arthroplasty.

BACKGROUND: Patellofemoral complications may cause pain and discomfort, sometimes leading to revision surgery for total knee arthroplasty patients, and patellar implant design has an impact on function of the reconstructed knee. The purpose of this in vivo biomechanics study was to understand the kinematic, functional, strength, and patient-reported outcome data of patients with anatomic and dome patellar implants. METHODS: Satisfactory age-matched, gender-matched, and body mass index-matched patients who underwent rotating-platform total knee arthroplasty from one joint replacement system with either dome (n = 16) or anatomic (n = 16) patellar components were tested in a human motion laboratory using high-speed stereoradiography during an unweighted seated knee extension and a weight-bearing lunge activity. Patellar kinematics, range of motion, strength, and patient-reported outcomes were compared between subjects with anatomic or dome component geometry. RESULTS: Both groups of patients achieved similar functional knee range of motion and reported similar outcomes and satisfaction. On average, patients with the anatomic component had 36% greater extensor strength compared with dome subjects. Patients with anatomic patellar components demonstrated significantly greater flexion of the patella relative to the femur and lower external rotation during the weighted lunge activity. CONCLUSIONS: Relative to the modified dome geometry, patients with anatomic patellar geometry achieved greater patellar flexion which may better replicate normal patellar motion. Patients with anatomic implants may regain more extensor strength compared to patients with dome implants due to geometric differences in the patellar component designs.

Biomechanical Changes Following Knee Arthroplasty During Sit-To-Stand Transfers: Systematic Review.

BACKGROUND: Knee arthroplasty (KA) is a common and effective surgical procedure that allows patients with knee osteoarthritis to restore functional ability and relieve pain. Sit-to-stand is a common demanding task during activities of daily living and is performed more than 50 times per day. The purpose of this systematic review is to obtain a comprehensive understanding of biomechanical changes during sit-to-stand transfers following KA. METHODS: Relevant articles were selected through MEDLINE (PubMed), Scopus, Embrace, and Web of Science. Articles were included if they met the following inclusion criteria: (1) underwent KA without restriction on the arthroplasty design, (2) involve kinematic, kinetic, or muscle activity variables as the primary outcome measure, (3) evaluated sit-to-stand, and (4) were written in English. RESULTS: A total of 13 articles were included in the current systematic review. The KA group exhibited altered movement patterns as compared to healthy controls. Considering the time course of recovery, improvement in knee joint kinematics was found up to 2 years but kinetic changes indicate intensified contralateral limb loading. For comparisons for limbs, limb differences were apparent, but those differences were resolved by 1 year. CONCLUSION: Despite the inevitable changes in kinematics, kinetics, and muscle activity in sit-to-stand since KA, it appears to be important to restore quadriceps strength for the operative limb in order to minimize risk for subsequent joint problems.

Position of the Hip in Yoga.

BACKGROUND: Yoga is growing in popularity as a form of exercise throughout the world. Orthopedic patients participate in yoga, yet little is known about the ranges-of-motion of the hip within various yoga poses. Orthopedic surgeons are unsure about what potential positions their patients are placing their hips during a yoga practice. The aim of this study is to quantify the degree of hip motion with common yoga poses. METHODS: Twenty healthy, regular practitioners of yoga performed 11 different yoga poses in a standardized fashion. Motion analysis was used to capture range-of-motion of the hip during each pose. RESULTS: Many yoga poses put the hip in extremes of motion. Poses such as downward dog, forward fold, seated twist, and pigeon stressed the hip in flexion. Warrior 1, warrior 2, crescent lunge, pigeon, and triangle stressed the hip in extension. Eagle and seated twist put the hip in higher adduction, while half moon, eagle, and triangle produced more hip internal rotation. CONCLUSION: Many poses were found to reach extremes of hip motion. This study may help guide the orthopedic surgeon in counseling hip arthroplasty and hip impingement patients about yoga-related activity. By knowing which poses potentially stress the hip in particular planes of motion, surgeons may better inform their patients who are returning to yoga after injury or surgery.

Mechanical environment influences muscle activity during infant rolling.

An infant's musculoskeletal and motor development is largely affected by their environment. Understanding how different mechanical environments affect an infant's movements and muscle use is necessary to inform the juvenile products industry and reduce incidents involving inclined nursery products each year. The purpose of this study was to determine how the coordinated movements and corresponding muscle activation patterns are affected by different mechanical environments, specifically the back incline angle. Thirty-eight healthy infants (age: 6.5 ± 0.7 months; 23 M/15 F) were enrolled in this IRB-approved in-vivo biomechanics study. Surface electromyography sensors recorded muscle activity of the erector spinae, abdominal muscles, quadriceps, and hamstrings while infants rolled in five different mechanical environments: a flat surface and four device configurations representing a range of inclines infants are commonly exposed to. Coordinated movements were determined using video. In all configurations featuring an inclined seatback angle, infants experienced significantly higher erector spinae muscle activation and significantly lower abdominal muscle activation compared to the flat surface. Infants also exhibited a different coordinated movement featuring spinal extension and a pelvic thrust in the inclined device configurations that was not previously observed on the flat surface alone. Understanding how infants coordinate their movements and use their muscles during rolling in different inclined environments provides more insight into motor development and may inform the juvenile products industry. Many factors impact an infant's movements, therefore future work should explore how other environmental interactions influence an infant's movements and muscle activation, particularly for rolling.

Muscle activation and coordinated movements of infant rolling.

Rolling is a critical step of infant development, encouraging muscle coordination and enabling independent exploration. Understanding muscle activity during infant rolling movements on a flat surface is necessary to more fully characterize how the rolling milestone is achieved. The purpose of this study was to determine infants' muscle activation throughout roll initiation for six previously established coordinated movements. Thirty-eight healthy infants (age: 6.5 ± 0.7 months; 23M/15F) were enrolled in this IRB-approved in-vivo biomechanics study. Surface electromyography sensors recorded muscle utilization from the erector spinae, abdominal muscles, quadriceps, and hamstrings while infants rolled. Each rolling movement was categorized as one of six roll types, and the mean muscle activity was analyzed. All roll types required initial activation of all measured muscle groups. Movements featuring axial rotation of the torso relative to the pelvis required highly active erector spinae muscles. Movements featuring trunk and hip flexion required highly active abdominal muscles. Infants used distinct coordinated muscle activations to achieve the six different roll types on a flat surface. A foundational understanding of the different muscle activation patterns required during infant rolling will provide crucial insight into motor development. This study quantified muscle coordination required of infants to achieve rolling on a firm flat surface. Previous research indicates that the mechanical environment in which an infant is placed impacts muscle activity and body position during normal lying. Therefore, future work should explore if mechanical environments that differ from a flat and firm surface also influence these coordinated movements and muscle activations.

How do babies roll? Identifying the coordinated movements of infant rolling through video compared to laboratory techniques.

BACKGROUND: Rolling is an important developmental milestone for infants where identifying the coordinated movement patterns could facilitate the early identification of motor development delays. Current methods for identifying coordinated movements of rolling are limited to a laboratory setting and not feasible for clinicians. OBJECTIVE: To develop video-based methods in which six coordinated movements, previously defined through motion capture, can be identified through video alone. METHODS: Forty-five videos of sixteen healthy infants achieving a roll were used to develop the video-based methodology and twenty-four videos had corresponding motion capture data used for validation. Four raters comprised of researchers and a clinician identified rolling coordination using the new video-based methods. A Fleiss' Kappa statistical test determined the inter- and intra-rater reliability of agreement for the new methodology and compared it to motion capture. RESULTS: The comparison of the motion capture and video-based methods resulted in substantial agreement. The video-based methods inter- and intra-rater reliability were substantial and almost perfect, respectively. CONCLUSIONS: We developed reliable methodology to accurately identify the coordinated movements of infant rolling using only 2D video. This methodology will allow researchers to reliably define coordinated movements of infants through video alone and may assist clinicians in identifying possible motor development delays and disorders.

Porcine computational modeling to investigate developmental dysplasia of the hip.

While it is well-established that early detection and initiation of treatment of developmental dysplasia of the hip (DDH) is crucial to successful clinical outcomes, research on the mechanics of the hip joint during healthy and pathological hip development in infants is limited. Quantification of mechanical behavior in both the healthy and dysplastic developing joints may provide insight into the causes of DDH and facilitate innovation in treatment options. In this study, subject-specific three-dimensional finite element models of two pigs were developed: one healthy pig and one pig with induced dysplasia in the right hindlimb. The objectives of this study were: (1) to characterize mechanical behavior in the acetabular articular cartilage during a normal walking cycle by analyzing six metrics: contact pressure, contact area, strain energy density, von Mises stress, principal stress, and principal strain; and (2) to quantify the effect on joint mechanics of three anatomic abnormalities previously identified as related to DDH: variation in acetabular coverage, morphological changes in the femoral head, and changes in the articular cartilage. All metrics, except the contact area, were elevated in the dysplastic joint. Morphological changes in the femoral head were determined to be the most significant factors in elevating contact pressure in the articular cartilage, while the effects of acetabular coverage and changes in the articular cartilage were less significant. The quantification of the pathomechanics of DDH in this study can help identify key mechanical factors that restore normal hip development and can lead to mechanics-driven treatment options.

Commercial infant products influence body position and muscle use.

The musculoskeletal and motor development of infants is affected by their environment, which varies from being held, lying on a firm flat surface, to seated in various nursery products. Nursery products can alter the body position of infants, particularly the position of the head/neck and trunk, which may inhibit an infant's ability to breathe. With U.S. infants spending an increasing amount of time in seated products, the purpose of this study was to assess muscle activation and body position in four commercial infant products (carrier, bouncer, rocker, and swing) during supine and prone positioning, compared to a firm flat surface. Thirteen healthy infants (age: 4.2 ± 1.4 months; 7 M/6F) were enrolled in this IRB-approved in-vivo biomechanics study. Surface electromyography sensors recorded muscle activity of the erector spinae, cervical paraspinals, quadriceps, and abdominal muscles and retro-reflective markers tracked movements to determine head-neck, trunk, and torso-pelvis flexion/extension in the sagittal plane. While supine, infants exhibited increased head-neck and trunk flexion of up to 21° and 27° above the playmat, respectively, in all seated products. While prone, high abdominal muscle activation compared to the playmat indicates that infants will fatigue faster in seated products. Additionally, the lower muscle activation levels exhibited in younger infants (< 4 months) compared to older infants (≥ 4 months) indicates that younger infants rely on the product design to maintain body position. However, offering infants a variety of environments to move within is important to avoid motor delay, therefore future work should explore how long-term use may impact an infant's development.

Radiographic Findings in Flexion Instability after Total Knee Arthroplasty.

Flexion instability (FI) is one of the leading causes of knee pain and revision surgery. Generally, the biomechanical etiology is considered to be a larger flexion than extension gap. This may be due to mismatch of components sizes to the bone or malalignment. Other factors such as muscle weakness may also play a role, and the diagnosis of FI after total knee arthroplasty (TKA) relies on a combination of patient's complaints during stair descent or walking and physical examination findings. Our study examines the role of implant positioning and sizes in the diagnosis of FI. A retrospective review of 20 subjects without perceived FI and 13 patients diagnosed with FI after TKA was conducted. Knee injury and osteoarthritis outcome scores (KOOS) were documented, and postoperative radiographs were examined. Measurements including included tibial slope, condylar offset, femoral joint line elevation along with surrogate soft-tissue measures for girth and were compared between groups. The FI group was found to have a significantly lower KOOS score compared with the non-FI group (55.6 vs. 73.5; p = 0.009) as well as smaller soft-tissue measurements over the pretubercle region (6.0 mm vs. 10.6 mm; p = 0.007). Tibial slope, condylar offset ratios, and femoral joint line elevation were not significantly different between the FI and non-FI groups. We noted a significant difference in tibial slope in posterior-stabilized implants in subjects with and without FI (6.4° vs. 1.5°; p = 0.003). Radiographic measurements consistent with malalignment were not indicative of FI. X-ray measurements alone are not sufficient to conclude FI as patient symptoms, and clinical examinations remain the key indicators for diagnosis. Radiographic findings may aid in surgeon determination of an underlying cause for an already identified FI situation and help in planning revision surgery.

The Influence of Knee Osteoarthritis on Spinopelvic Alignment and Global Sagittal Balance.

Osteoarthritis (OA) of the knee is thought to lead to a loss of lumbar lordosis (LL) as a compensation for knee flexion contracture. Changes in sagittal alignment are not limited to the lumbar spine and involve a complex interplay of alignment of the hip, pelvis, and spine. While spine-hip interactions have been previously explored, the influence of knee OA sagittal alignment parameters on spinopelvic alignment and global sagittal balance remains unexplored. Standing radiological examination using EOS biplanar radiography was examined in 108 patients with knee OA. Whole-body sagittal alignment parameters (thoracic kyphosis, LL, pelvic incidence, pelvic tilt [PT], femoropelvic angle [FPA], femoral tilt angle [FTA], tibial tilt angle, and knee flexion angle [KFA]) and global balance parameters (sagittal vertical axis [SVA] and odontoid hip axis [OD-HA] angle) were measured three dimensionally (3D). The correlation coefficients among all parameters were assessed. A multiple stepwise linear regression model was built to investigate the direct association between SVA or OD-HA angle (dependent variables) and sagittal alignment parameters and demographic data (independent variables). Significant correlations between KFA, FPA, FTA, SVA, and OD-HA angle were found. FTA was correlated with LL and FPA. The FTA was the most influential predictor of both global sagittal balance parameters (p < 0.001). Knee OA leads to changes in global sagittal balance with effects at the hip, knee, pelvis, and spine. FTA (forward flexion of the femur vs. the vertical plane) is the largest driver of global sagittal plane balance in patients with knee OA.

Mechanical Analysis of 3 Posterior Fusion Assemblies Intended to Cross the Cervicothoracic Junction.

STUDY DESIGN: This was a biomechanical comparison study. OBJECTIVE: The objective of this study is to evaluate the mechanical properties of 3 posterior spinal fusion assemblies commonly used to cross the cervicothoracic junction. SUMMARY OF BACKGROUND: When posterior cervical fusions are extended into the thoracic spine, an instrumentation transition is often utilized. The cervical rod (3.5 mm) can continue using thoracic screws designed to accept the cervical rods. Alternatively, traditional thoracic screws may be used to accept thoracic rods (5.5 mm). This requires the use of a 3.5-5.5 mm transition rod or a separate 5.5 mm rod and a connector to fix the 3.5 and 5.5 mm rod together. Fusion success depends on the immobilization of vertebrae, yet the mechanics provided by these different assemblies are unknown. MATERIALS AND METHODS: Three titanium alloy posterior fusion assemblies intended to cross the cervicothoracic junction underwent static compressive bending, tensile bending, and torsion as described in ASTM F1717 to a torque of 2.5 Nm. Five samples of each assembly were attached to ultrahigh molecular weight polyethylene blocks via multiaxial screws for testing. Force and displacement were recorded, and the stiffness of each construct was calculated. RESULTS: The 2 assemblies that included a 5.5 mm rod were found to be stiffer and have less range of motion than the assembly that used only 3.5 mm rods. CONCLUSIONS: The results of this study indicate that incorporating a 5.5 mm rod in a fusion assembly adds significant stiffness to the construct. When the stability of a fusion is of heightened concern, as demonstrated by the ASTM F1717 vertebrectomy (worst-case scenario) model, including 5.5 mm rods may increase fusion success rates. LEVEL OF EVIDENCE: Level V.

Postural Control Differences between Patients with Posterior Tibial Tendon Dysfunction and Healthy People during Gait.

BACKGROUND: Patients with posterior tibial tendon dysfunction (PTTD) may exhibit postural instability during walking likely due to a loss of medial longitudinal arch, abnormal foot alignment, and pain. While many studies have investigated gait alterations in PTTD, there is no understanding of dynamic postural control mechanisms in this population during gait, which will help guide rehabilitation and gait training programs for patients with PTTD. The purpose of the study was to assess dynamic postural control mechanisms in patients with stage II PTTD as compared to age and gender matched healthy controls. METHODS: Eleven patients with stage II PTTD (4 males and 7 females; age 59 ± 1 years; height 1.66 ± 0.12 m; mass 84.2 ± 16.0 kg) and ten gender and age matched controls were recruited in this study. Participants were asked to walk along a 10 m walkway. Ten Vicon cameras and four AMTI force platforms were used to collect kinematic and center of pressure (COP) data while participants performed gait. To test differences between PTTD vs. control groups, independent t-tests (set at α < 0.05) were performed. RESULTS: Patients with PTTD had significantly higher double stance ratio (+23%) and anterior-posterior (AP) time to contact (TTC) percentage (+16%) as compared to healthy control. However, PTTD had lower AP COP excursion (-19%), AP COP velocity (-30%), and medial-lateral (ML) COP velocity (-40%) as compared to healthy controls. Mean ML COP trace values for PTTD were significantly decreased (-23%) as compared to controls, indicating COP trace for PTTD tends to be closer to the medial boundary than controls during single-support phase of walking. CONCLUSION: PTTD patients showed more conservative and cautious postural strategies which may help maintain balance and reduce the need for postural adjustment during PTTD gait. They also showed more medially shifted COP patterns than healthy controls during single-support phase of walking. Dynamic postural control outcomes could be used to develop effective gait training programs aimed at alleviating a medial shift of COP (everted foot) for individuals with PTTD in order to improve their functionality and gait efficiency.

Changes in kinematics, kinetics, and muscle activity in patients with lumbar spinal stenosis during gait: systematic review.

BACKGROUND CONTEXT: Lumbar spinal stenosis (LSS) is one of the most common orthopaedic conditions and affects more than half a million people over the age of 65 in the US. Patients with LSS have gait dysfunction and movement deficits due to pain and symptoms caused by compression of the nerve roots within a narrowed spinal canal. PURPOSE: The purpose of the current systematic review was to summarize existing literature reporting biomechanical changes in gait function that occur with LSS, and identify knowledge gaps that merit future investigation in this important patient population. STUDY DESIGN/SETTING: This study is a systematic literature review. OUTCOME MEASURES: The current study included biomechanical variables (e.g., kinematic, kinetic, and muscle activity parameters). METHODS: Relevant articles were selected through MEDLINE, Scopus, Embase, and Web of Science. Articles were included if they: 1) included participants with LSS or LSS surgery, 2) utilized kinematic, kinetic, or muscle activity variables as the primary outcome measure, 3) evaluated walking or gait tasks, and 4) were written in English. RESULTS: A total of 11 articles were included in the current systematic review. The patients with LSS exhibited altered gait function as compared to healthy controls. Improvements in some biomechanical variables were found up to one year after surgery, but most gait changes were found within one month after surgery. CONCLUSIONS: Although numerous studies have investigated gait function in patients with LSS, gait alterations in joint kinetics and muscle activity over time remain largely unknown. In addition, there are limited findings of spinal kinematics in patients with LSS during gait. Thus, future investigations are needed to investigate longer-term gait changes with regard to spinal kinematics, joint kinetics, and muscle activity beyond one month after LSS surgery.

Supine lying center of pressure movement characteristics as a predictor of normal developmental stages in early infancy.

BACKGROUND: Absent or abnormal fidgety movements in young infants are associated with subsequent diagnoses of developmental disorders such as cerebral palsy. The General Movement Assessment (GMA) is a qualitative clinical tool to visually identify infants with absent or abnormal fidgety movements associated with developmental stage, yet no quantitative measures exist to detect fidgety activity. OBJECTIVE: To determine whether a correlation exists between quantitative Center of Pressure (CoP) measurements during supine lying and age. METHODS: Twenty-four healthy full-term infants participated in the Institutional Review Board-approved study. Participants were placed supine in view of a GoPro camera on an AMTI force plate for two minutes. Spontaneous movements were evaluated by three trained raters using the GMA. Traditional CoP parameters (range, total path length, mean velocity, and mean acceleration of resultant CoP) were assessed, and complexity of each of the resultant CoP variables (location, velocity, and acceleration) was calculated by sample entropy. Linear regression with Pearson correlation was performed to assess the correlations between the CoP parameters and adjusted age. RESULTS: Nineteen infants were deemed fidgety per the GMA and were included in further analyses. All Sample entropy measures and range of resultant CoP had significant correlations with adjusted age (p< 0.05). Sample entropy of resultant CoP decreased with increasing age while range of resultant CoP increased with increasing age. CONCLUSION: The results suggest that complexity of CoP and range of CoP are good predictors of age in typical developing infants during the fidgety period. Therefore, an approach using these parameters should be explored further as a quantifiable tool to identify infants at risk for neurodevelopmental impairment.