High-performance phoxonic cavity designs for enhanced acousto-optical interaction.

Effective confinement of light and sound is achieved through a one-dimensional phoxonic crystal (PxC) cavity. In particular, co-localization of gigahertz phonons and infrared photons in a cavity created by introducing a defect inside a multilayer PxC has been performed. The incident elastic waves can control the refractive index variation of the dual phononic-photonic cavity layer. We also studied the acousto-optic (AO) effect in four AO materials, each located in the cavity layer between two identical Bragg mirrors. The cavities are designed to have high-quality factors for both photon and phonon resonances, which are proportional to their lifetime and allow for a much stronger photon-phonon interaction. The AO effect causes a shift in the optical mode of the photonic band gap. The values of the refractive index of the AO cavities layer are estimated as a function of time based on the elastic strain perturbation using the relevant photo-elastic relations. The phoxonic band gaps and transmission spectra for both unperturbed and elastically perturbed PxC structures are derived depending on the transfer matrix method. In our results, the selected AO cavity of PbMoO4 provided the strongest AO coupling, in which the maximum wavelength shift of the resonant photonic modes reached 113.3 nm. In addition, 11.9 nm is the maximum displacement amplitude of the confinement elastic wave of the same nanocavity. The TeO2 cavity provided the highest Q values for both photonic and phononic modes of 7093 and 175, respectively. We think this research could open the way to study the properties of linear elastic materials to design extremely miniaturized AO devices.

Determination of 1-propanol, ethanol, and methanol concentrations in water based on a one-dimensional phoxonic crystal sensor.

In this research, the photonic and phononic response of one-dimensional multilayer phoxonic crystals (PxCs) with normal incident of electromagnetic and acoustic waves is discussed. The presented design can work as a highly sensitive sensor for measuring three binary alcohol/water mixtures (i.e., 1-propanol/water, ethanol/water, and methanol/water) for a wide range of concentrations. The PxC sensor is able to detect small changes in the refractive index and longitudinal sound velocity of the alcohol/water mixture with initially neglecting the acousto-optical interaction. The sensor design is a defective structure as [$({\rm Si}/{\rm SiO}_2)^4 (\rm mixture\;wt. \%) {({{\rm SiO}_2}/{\rm Si})^4}$(Si/SiO2)4(mixturewt.%)(SiO2/Si)4]. Also, we studied the effects of changing mixture concentrations from 0 wt. % to 100 wt. % on the physio-chemical parameters and resonant mode frequency. In our results, we have achieved high performance for the three alcohol mixtures in both phononic and photonic sensors especially for low concentrations. For example, in the photonic sensor we obtained sensitivity, $Q$Q value, and figure of merit of 873 nm/RIU, 755, and ${290}\;{{\rm RIU}^{ - 1}}$290RIU-1, respectively, for methanol of concentration 10% in water. The phononic sensor showed higher results compared with the photonic sensor, as for ethanol with concentration 26.8% in water we obtained sensitivity, $Q$Q value, and figure of merit of ${37}\;{{\rm MHz/ms}^{ - 1}}$37MHz/ms-1, 1604, and ${8.4}\;{({\rm m/s})^{ - 1}}$8.4(m/s)-1, respectively. The proposed structure has different merits: operation at high temperatures, compact size, ease of fabrication, and feasibility of alcohol detection with two different methods that could be used in many chemical applications.

Ultra-sensitive optimized one-dimensional phononic crystal as a fluidic sensor to enhance the measurement of acetic acid concentration.

The current investigation theoretically presents a one-dimensional phononic crystal (PnC) as a fluidic sensor. The sensor under consideration aims to distinguish the concentration of acetic acid. The primary configuration of the proposed sensor is constructed with lead, epoxy, and a defect layer in the middle of the structure, that is filled with acetic acid (vinegar). As a result of the rise in density and decline in the speed of sound at a 100% concentration of acetic acid in comparison to pure water, the peak frequency of the output has shifted towards lower frequencies. Given that the maximum permissible concentration of acetic acid in water for vinegar is above 30%, sensor simulations were conducted within the concentration range of 25-35% with a step size of 1%. Interestingly, the sensitivity of the sensor exhibits a polynomial change in response to the concentration of acetic acid. Consequently, the highest level of sensitivity, which corresponds to the lowest concentration of vinegar, is recorded as 48.44 × 106 (Hz). The proposed system exhibits a remarkable value of the quality factor of 2802.91. Furthermore, the optimal figure of merit (FOM) is achieved when the concentration is at its lowest, with a value of 94.00. Furthermore, the temperature effects are taken into account for a wide range between 10 and 60 °C. A pronouncing sensitivity is obtained for all temperatures changes and the highest one reached the value of 1.57 × 106 (Hz/°C) at a temperature of 25 °C. Considering the present circumstances, the suggested sensor configuration has the potential to cater to a diverse array of other fluids, specifically their concentration and temperature, thereby offering a broad scope of applications.

Characteristics of multi-absorption bands in near IR based on a 1D photonic crystal comprising two composite metamaterials.

The Matlab program has been utilized in this study to examine the absorption spectral properties of a one-dimensional photonic crystal (1DPCs) comprising two composite metamaterials through near IR wavelengths. The composite metamaterials are designed from Ag of a gyroidal geometry (layer A) and hyperbolic metamaterial (layer B). Therefore, the introduced design is labeled as [Formula: see text] with n and m to define the periodicity of the hyperbolic metamaterial and the whole structure, respectively. The numerical findings have been introduced in the vicinity of the effective medium theory, transfer matrix method and the Drude model as well. In this regard, the numerical results demonstrate the appearance of some spectral absorption bands ranging from 0.7 µm to 3 µm for both TM and TE polarizations. Additionally, these bands are almost insensitive to the changes in the angle of incidence. Interestingly, we have considered the role played by some parameters such as the permittivities and thicknesses of both layers on the introduced absorption bands. Finally, we believe that the investigated results could be promising through many applications such as wavelength selective absorbers, solar energy, and smart windows as well.

Investigating the impact of shear and bulk viscosity on the damping of confined acoustic modes in phononic crystal sensors.

Phononic crystal (PnC) sensors are recognized for their capability to control acoustic wave propagation through periodic structures, presenting considerable potential across various applications. Despite advancements, the effects of fluid viscosity on PnC performance remain intricate and inadequately understood. This study theoretically investigates the influence of shear (dynamic) and bulk viscosity on acoustic wave damping in defective one-dimensional phononic crystal (1D PnC) sensors designed for detecting liquid analytes. Acetic acid with varying viscosities is considered to fill a cavity layer intermediated by a multilayer stack of lead and epoxy. The effects of dynamic and bulk viscosity on the resonance characteristics of the defective mode were analyzed. Numerical results reveal that increased dynamic viscosity leads to substantial broadening and decreased intensity of resonance peaks, accompanied by a shift to higher frequencies due to enhanced elastic wave attenuation and damping. At low dynamic viscosity (η = 0.2 ηd), numerous resonance peaks with varying intensities are observed. However, at higher viscosities (η = 2.0 ηd to η = 10.0 ηd), only one prominent peak appears in the spectrum. The intensity of this resonant peak starts at 98% for η = 2 ηd and decreases to 58.8% as the dynamic viscosity increases to η = 10 ηd. Additionally, the combined effect of dynamic and bulk viscosity introduces further damping, causing a strong shift of the resonance peak to higher frequencies, along with an increase in the full width at half maximum (FWHM) and a decrease in the quality factor (QF). These findings emphasize the necessity of incorporating both shear and bulk viscosity in the design of PnC sensors to enhance their sensitivity and accuracy in practical applications. This theoretical framework provides critical insights for optimizing sensor performance and bridging gaps between theoretical predictions and experimental observations, especially in 1D PnCs, offering potential solutions to challenges in real-world PnC sensor applications.

High-performance biosensors based on angular plasmonic of a multilayer design: new materials for enhancing sensitivity of one-dimensional designs.

In this study, a theoretical examination is conducted to investigate the biosensing capabilities of different surface plasmon resonance (SPR) based hybrid multilayer structures, which are composed of two-dimensional (2D) materials. The transfer matrix formulation is implemented to calibrate the results of this study. A He-Ne laser of wavelength = 632.8 nm is used to simulate the results. Many permutations and combinations of layers of silver (Ag), aluminum oxynitride (AlON), and 2D materials were utilized to obtain the optimized structure. Ten dielectrics and twelve 2D materials were tested for a highly sensitive multilayer hybrid sensing design, which is composed of the prism (Ohara S-FPL53)/Ag/AlON/WS2/AlON/sensing medium. The optimized biosensing design is capable of sensing and detecting analytes whose refractive variation is limited between 1.33 and 1.34. The maximum sensitivity, which is achieved by using the proposed design is 488.2° per RIU. Additionally, the quality factor, figure of merit, detection limit, and qualification limit values of the optimized design were also calculated to obtain a true picture of the sensing capabilities. The designing approach based on the multilayer hybrid SPR biosensors has the potential to develop various plasmonic biosensors that are related to food, chemical, and biomedical engineering fields.

Improved performance of temperature sensors based on the one-dimensional topological photonic crystals comprising hyperbolic metamaterials.

This paper seeks to progress the field of topological photonic crystals (TPC) as a promising tool in face of construction flaws. In particular, the structure can be used as a novel temperature sensor. In this regard, the considered TPC structure comprising two different PC designs named PC1 and PC2. PC1 is designed from a stack of multilayers containing Silicon (Si) and Silicon dioxide (SiO2), while layers of SiO2 and composite layer named hyperbolic metamaterial (HMM) are considered in designing PC2. The HMM layer is engineered using subwavelength layers of Si and Bismuth Germinate, or BGO ( Bi 4 Ge 3 O 12 ). The mainstay of our suggested temperature sensor is mainly based on the emergence of some resonant modes inside the transmittance spectrum that provide the stability in the presence of the geometrical changes. Meanwhile, our theoretical framework has been introduced in the vicinity of transfer matrix method (TMM), effective medium theory (EMT) and the thermo-optic characteristics of the considered materials. The numerical findings have extensively introduced the role of some topological parameters such as layers' thicknesses, filling ratio through HMM layers and the periodicity of HMM on the stability or the topological features of the introduced sensor. Meanwhile, the numerical results reveal that the considered design provides some topological edge states (TESs) of a promising robustness and stability against certain disturbances or geometrical changes in the constituent materials. In addition, our sensing tool offers a relatively high sensitivity of 0.27 nm/°C.

Fano resonance in one-dimensional quasiperiodic topological phononic crystals towards a stable and high-performance sensing tool.

Phononic crystals (PnCs) emerge as an innovative sensor technology, especially for high-performance sensing applications. This study strives to advance this field by developing new designs of PnC structures that exhibit stability in the face of construction imperfections and deformations, focusing on the evolution of topological PnCs (TPnCs). These designs could be promising to overcome the problem of instability involved in most of the theoretical PnC sensors when they emerge in experimental verification. In particular, the fabrication process of any design could collide with some fluctuations in controlling the size of each component. Thus, Fano resonance is introduced through a one-dimensional (1D) quasiperiodic TPnC. To the best of the author's knowledge, this study is the first to observe Fano modes in liquid cavities through 1D PnCs. Various quasiperiodic PnC designs are employed to detect the temperature of alcohols (specifically propanol) across an extensive temperature range (160-240 °C). The effects of many geometrical parameters on the sensor stability, such as material thicknesses, are studied. Numerical findings demonstrated that the designed quasiperiodic topological PnCs based on Fibonacci sequence of the second order proved superior performance. This sensing tool provides sensitivity, quality factor and figure-of-merit values of 104,533.33 Hz/°C, 223.69 and 0.5221 (/°C), respectively, through temperature detection of propanol in the range of 160-240 °C.

Monitoring and simulation of the fuel irradiation behavior in nuclear reactors based on phononic crystal structure.

We have presented in the current work a novel idea for simulating the irradiation behaviors of the nuclear fuel pellets in nuclear reactors by using a one-dimensional defective phononic crystal (1D-DPnC) design was presented. The transmission spectra of the incident mechanical waves were considered basic data for expressing the characteristics of different nuclear fuel-pellets. Herein, the density, sound speed, and Young's modulus of the fuel-pellets represent the key parameters that are influenced by the irradiation behaviors of these pallets. Mixed plutonium-uranium oxide (MOX) nuclear fuel is considered the main fuel in the present study. In addition, a comparison is performed for this fuel with other types of nuclear fuels. Moreover, the mechanical properties of these MOX-pellets are dependent on the porosity, the ratio of oxygen-to-metal (O/M), and the plutonium (Pu-content). The theoretical treatments depend on the transfers matrix method to compute the transmission spectra through the 1D-DPnC. The numerical findings provided that the MOX-pellet has the highest performance compared to other fuel pellets and with sensitivity equal to 59.388 × 103 Hz s/m. It was also reported that the effects of the percentage of the O/M and Pu- content in MOX had a minor effect in a comparison with the impact of porosity. The theoretical simulation agreed extremely with the experimental data reported for these nuclear fuels. Because of the close relationship between sound speed and density, this sensor can be utilized to monitor the porosity, O/M, Pu-content, and density of fuel-pellets as a quick and non-destructive evaluation technique in a nuclear fuel fabrication laboratory. This article has proven theoretically that MOX fuel produced from nuclear waste of uranium dioxide and plutonium dioxide gives excellent results compared to other types of nuclear fuels, and this agrees with experimental researches. Thus, it may contribute in preserving the environment from nuclear waste, and this can be considered a novel kind of purification of environmental pollution treatment.

One-Dimensional Phononic Crystals: A Simplified Platform for Effective Detection of Heavy Metals in Water with High Sensitivity.

Recently, the pollution of fresh water with heavy metals due to technological and industrial breakthroughs has reached record levels. Therefore, monitoring these metals in fresh water has become essentially urgent. Meanwhile, the conventional periodic one-dimensional phononic crystals can provide a novel platform for detecting the pollution of heavy metals in fresh water with high sensitivity. A simplified design of a defective, one-dimensional phononic crystals (1D-PnC) structure is introduced in this paper. The sensor is designed from a lead-epoxy multilayer with a central defect layer filled with an aqueous solution from cadmium bromide (CdBr2). The formation of a resonant peak through the transmittance spectrum is highly expected. This study primarily aims to monitor and detect the concentration of cadmium bromide in pure water based on shifting the position of this resonant peak. Notably, any change in cadmium bromide concentration can affect the acoustic properties of cadmium bromide directly. The transfer matrix method has been used to calculate the transmission spectra of the incident acoustic wave. The numerical findings are mainly based on the optimization of the cadmium bromide layer thickness, lead layer thickness, epoxy layer thickness, and the number of periods to investigate the most optimum sensor performance. The introduced sensor in this study has provided a remarkably high sensitivity (S = 1904.25 Hz) within a concentration range of (0-10,000 ppm). The proposed sensor provides a quality factor (QF), a resolution, and a figure of merit of 1398.51752, 48,875,750 Hz, and 4.12088 × 10-5 (/ppm), respectively. Accordingly, this sensor can be a potentially robust base for a promising platform to detect small concentrations of heavy metal ions in fresh water.

Multiplication of photonic band gaps in one-dimensional photonic crystals by using hyperbolic metamaterial in IR range.

The light-slowing effect near band endpoints is frequently exploited in photonic crystals to enhance the optical transmittance. In a one-dimensional binary photonic crystal (1DPC) made of hyperbolic metamaterials (HMMs), we theoretically examined the angle-dependent omnidirectional photonic bandgap (PBG) for TM polarization. Using the transfer matrix approach, the optical characteristics of the 1DPC structure having dielectric and HMM layers were examined at the infrared range (IR). As such, we observed the existing of numerous PBGs in this operating wavelength range (IR). Meanwhile, the HMM layer is engineered by the subwavelength dielectric- nanocomposite multilayers. The filling fraction of nanoparticles have been explored to show how they affect the effective permittivity of the HMM layer. Furthermore, the transmittance properties of the suggested structure are investigated at various incident angles for transverse magnetic (TM) and transverse electric polarizations. Other parameters such as, the permittivity of the host material, the filling fraction of nanoparticles, and the thickness of the second layer (HMM) are also taken into account. Finally, we investigated the effect of these parameters on the number and the width of the (PBGs). With the optimum values of the optical parameters of the nanocomposite (NC) layer, this research could open the way for better multi-channel filter photonic crystals.

A doped-polymer based porous silicon photonic crystal sensor for the detection of gamma-ray radiation.

In this research, a theoretical investigation of the one-dimensional defective photonic crystals is considered for the detection of gamma-ray radiation. Each unit cell of the considered one-dimensional photonic crystals (1D PhCs) is composed of two layers designed from porous silicon infiltrated by poly-vinyl alcohol polymer doped with crystal violet (CV) and carbol fuchsine (CF) dyes (doped-polymer) with different porosity. In addition, a single layer of doped-polymer is included in the middle of the designed 1D PhCs to stimulate the localization of a distinct resonant wavelength through the photonic band gap. In particular, the appearance of this resonant mode represents the backbone of our study towards the detection of γ-ray radiation with doses from 0 to 70 Gy. The Bruggeman's effective medium equation, the fitted experimental data to the refractive index of the doped-polymer, and the Transfers Matrix Method (TMM) serve as the mainstay of our theoretical treatment. The numerical findings provide significant contributions to some of the governing parameters such as the thicknesses of the considered materials on the performance of the presented sensor, the effect of incidence angle and the porosity of the considered materials on the resonance wavelength. In this regard, at optimum values of these parameters the sensitivity, quality factor, signal-to-noise ratio, detection limit, sensor resolution, and figure of merit that are obtained are 205.7906 nm RIU-1, 9380.483, 49.315, 2.05 × 10-5 RIU, 3.27 × 10-5, and 2429.31 RIU-1, respectively. Therefore, we believe that the suggested design could be of significant interest in many industrial, medical, and scientific applications.

Enhanced Sensitivity of Binary/Ternary Locally Resonant Porous Phononic Crystal Sensors for Sulfuric Acid Detection: A New Class of Fluidic-Based Biosensors.

This research presented a comprehensive study of a one-dimensional (1D) porous silicon phononic crystal design as a novel fluidic sensor. The proposed sensor is designed to detect sulfuric acid (H2SO4) within a narrow concentration range of 0-15%. Sulfuric acid is a mineral acid extensively utilized in various physical, chemical, and industrial applications. Undoubtedly, its concentration, particularly at lower levels, plays a pivotal role in these applications. Hence, there is an urgent demand for a highly accurate and sensitive tool to monitor even the slightest changes in its concentration, which is crucial for researchers. Herein, we presented a novel study on the optimization of the phononic crystal (PnC) sensor. The optimization process involves a comparative strategy between binary and ternary PnCs, utilizing a multilayer stack comprising 1D porous silicon (PSi) layers. Additionally, a second comparison is conducted between conventional Bragg and local resonant PnCs to demonstrate the design with the highest sensitivity. Moreover, we determine the optimum values for the materials' thickness and number of periods. The results revealed that the ternary local resonant PnC design with the configuration of {silicone rubber/[PSi1/PSi2/PSi3]N/silicone rubber} is the optimal sensor design. The sensor provided a super sensitivity of 2.30 × 107 Hz for a concentration change of just 2%. This exceptional sensitivity is attributed to the presence of local resonant modes within the band gap of PnCs. The temperature effects on the local resonant modes and sensor performance have also been considered. Furthermore, additional sensor performance parameters such as quality factor, figure of merit, detection limit, and damping rate have been calculated to demonstrate the effectiveness of the proposed liquid sensor. The transfer matrix method was utilized to compute the transmission spectra of the PnC, and Hashin's expression was employed to manipulate the porous silicon media filled with sulfuric acid at various concentrations. Lastly, the proposed sensor can serve as an efficient tool for detecting acidic rain, contaminating freshwater, and assessing food and liquid quality, as well as monitoring other pharmaceutical products.

A promising ultra-sensitive CO2 sensor at varying concentrations and temperatures based on Fano resonance phenomenon in different 1D phononic crystal designs.

Detecting of the levels of greenhouse gases in the air with high precision and low cost is a very urgent demand for environmental protection. Phononic crystals (PnCs) represent a novel sensor technology, particularly for high-performance sensing applications. This study has been conducted by using two PnC designs (periodic and quasi-periodic) to detect the CO2 pollution in the surrounding air through a wide range of concentrations (0-100%) and temperatures (0-180 °C). The detection process is physically dependent on the displacement of Fano resonance modes. The performance of the sensor is demonstrated for the periodic and Fibonacci quasi-periodic (S3 and S4 sequences) structures. In this regard, the numerical findings revealed that the periodic PnC provides a better performance than the quasi-periodic one with a sensitivity of 31.5 MHz, the quality factor (Q), along with a figure of merit (FOM) of 280 and 95, respectively. In addition, the temperature effects on the Fano resonance mode position were examined. The results showed a pronounced temperature sensitivity with a value of 13.4 MHz/°C through a temperature range of 0-60 °C. The transfer matrix approach has been utilized for modeling the acoustic wave propagation through each PnC design. Accordingly, the proposed sensor has the potential to be implemented in many industrial and biomedical applications as it can be used as a monitor for other greenhouse gases.

Optical absorption performance of CZTS/ZnO thin film solar cells comprising anti-reflecting coating of texturing configuration.

This paper introduces a novel design of a thin-film solar cell based on CZTS and ZnO composite materials with the help of ITO as the front contact layer. This study primarily focuses on how the cells' optical absorbance at visible wavelengths can be improved. COMSOL Multiphysics is employed as a powerful tool for the investigation of the numerical simulation. The numerical findings showed that the optimum thicknesses of the ITO and ZnO are 80 and 350 nm, respectively. In this regard, with a normal incidence, a wide range of incoming light wavelengths from 450 nm to 800 nm might result in optical absorption of the examined cell of above 0.9. However, this value decreased significantly to reach less than 0.75 when the angle of incidence increased to 50°. To minimize this reduction, on the top surface of the cell, a texture-designed anti-reflective coating designed from a single period of well-known one-dimensional photonic crystals is deposited. The findings demonstrated that the cell's absorption at normal incidence could reach over 0.96 through the overall incident wavelengths. Therefore, CZTS/ZnO thin-film solar cells with an anti-reflecting coating of texturing configuration showed enormous potential for manufacturing effective solar cells.

A combination of angle insensitive stopband/passband filters based on one-dimensional hyperbolic metamaterial quasiperiodic photonic crystals.

In the present work, we demonstrate the transmittance properties of one dimensional (1D) quasi-periodic photonic crystals that contain a superconductor material and a hyperbolic metamaterial (HMM). A HMM layer is engineered by the subwavelength undoped and doped Indium Arsenide (InAs) multilayers. Many resonance peaks with angle stability are obtained from the proposed Fibonacci sequence structure using the transfer matrix method (TMM). In this case, the Fibonacci sequence serves as the mainstay in the design of our structure. The permittivity of the utilized superconductor and the HMM are also analyzed, respectively. The numerical findings showed that the incident angle has no effect on the wavelength positions of the resonance peaks. The effects of many parameters such as the superconductor material thickness, Fibonacci sequence number, and sequence type are discussed for the proposed structure. At various operating temperatures and superconductor material types, the transmittance characteristics of the proposed structure were also examined. The designed structure can serve as a combination of pass/stop band filters for near-infrared (NIR) applications.

Heavy metals biosensor based on defective one-dimensional phononic crystals.

In recent years, the detection of water pollution with low levels of heavy metals has attracted the great attention of many researchers as a result of the imminent danger of this type of pollution to all mankind. Meanwhile, we introduce a theoretical approach based on the one-dimensional phononic crystals (1D-PnCs) with a central defect layer as a novel platform for the highly sensitive detection of heavy metal pollution in freshwater. Therefore, the creation of a resonant peak in the transmittance spectrum related to this defect layer is highly conceivable. In this regard, the detection of cadmium chloride (CdCl2) as a dangerous, toxic, and extremely hazardous heavy metal could be investigated based on the small displacement in the position of this resonant peak with the changes in the CdCl2 concentration. Notably, any change in CdCl2 concentration has a direct impact on its acoustic properties. The theoretical framework of our research study is essentially based on the 2 × 2 transfer matrix method and the acoustic properties of the constituent materials as well. The optimization of all sensor parameters represents the mainstay of this study to get the best sensor performance. In this regard, the proposed sensor has a remarkably high sensitivity (S = 1904.25 Hz/ppm) over a concentration range of 0 - 10000 ppm. In addition, the sensor has a high quality factor (QF), and figure of merit of 1771.318, and 73529410-5 (ppm-1), respectively. Finally, we believe this sensor could be a key component of a feasible platform for detecting low concentrations of different heavy metal ions in freshwater.

Periodic and quasi-periodic one-dimensional phononic crystal biosensor: a comprehensive study for optimum sensor design.

The resonant acoustic band gap materials have introduced an innovative generation of sensing technology. Based on the local resonant transmitted peaks, this study aims to comprehensively investigate the use of periodic and quasi-periodic one-dimension (1D) layered phononic crystals (PnCs) as a highly sensitive biosensor for the detection and monitoring of sodium iodide (NaI) solution. Meanwhile, a defect layer is introduced defect layer inside the phononic crystal designs to be filled with NaI solution. The proposed biosensor is developed based on the periodic PnCs structure and quasi-periodic PnCs structure. The numerical findings demonstrated that the quasi-periodic PnCs structure provided a wide phononic band gap and a large sensitivity compared to the periodic one. Moreover, many resonance peaks through the transmission spectra are introduced for the quasi-periodic design. The results also show that the resonant peak frequency changes effectively with varying NaI solution concentrations in the third sequence of the quasi-periodic PnCs structure. The sensor can differentiate between concentrations ranging from 0 to 35% with a 5% step, which is extremely satisfying for precise detection and can contribute to a variety of issues in medical applications. Additionally, the sensor provided excellent performance for all the concentrations of the NaI solution. For instance, the sensor has a sensitivity of 959 MHz, a quality factor of 6947, a very low damping factor of 7.19 × 10-5, and a figure of merit of 323.529.

A theoretical approach for a new design of an ultrasensitive angular plasmonic chemical sensor using black phosphorus and aluminum oxide architecture.

In this study, the biosensing capabilities of conventional and hybrid multilayer structures were theoretically examined based on surface plasmon resonance (SPR). The transfer matrix method is adopted to obtain the reflectance spectra of the hybrid multilayer structure in the visible region. In this regard, the considered SPR sensor is configured as, [prism (CaF2)/Al2O3/Ag/Al2O3/2D material/Al2O3/Sensing medium]. Interestingly, many optimization steps were conducted to obtain the highest sensitivity of the new SPR biosensor from the hybrid structure. Firstly, the thickness of an Al2O3 layer with a 2D material (Blue P/WS2) is optimized to obtain an upgraded sensitivity of 360° RIU-1. Secondly, the method to find the most appropriate 2D material for the proposed design is investigated to obtain an ultra-high sensitivity. Meanwhile, the inclusion of black phosphorus (BP) increases the sensor's sensitivity to 466° RIU-1. Thus, black phosphorus (BP) was obtained as the most suitable 2D material for the proposed design. In this regard, the proposed hybrid SPR biosensing design may pave the way for further opportunities for the development of various SPR sensors to be utilized in chemical and biomedical engineering fields.

Angular surface plasmon resonance-based sensor with a silver nanocomposite layer for effective water pollution detection.

For sensing various samples of polluted water and various sodium chloride concentrations using an angular surface plasmon resonance (ASPR), we have introduced a conventional structure and a hybrid heterostructure in the current research. The suggested structures are composed of silver metal, dielectric layers, silver nanocomposite, and a sensing medium. The reflectance spectra of all structures in the visible region were obtained through the utilization of the transfer matrix method by using the angular interrogation method depending on the Kretschmann configuration. Through our findings, five substrate parameters have been optimized to attain the utmost level of sensitivity across all structures: the thickness of Ag-metal, the type and thickness of dielectric materials, the host material type and the volume fraction of nanoparticles for the nanocomposite layer. In this regard, the suggested sensor provides excellent performance with a sensitivity of 448.1°[Formula: see text], signal-to-noise ratio of 0.787, sensor resolution of 0.284°, and figure of merit of 78.766 RIU-1. Therefore, we believe that the introduced design of our ASPR sensor presents a good candidate for an accurate and efficient detection of low concentrations of contaminated water and sodium chloride as well.