RESUMO
This current study assessed the impacts of morphology adjustment of perovskite BiFeO3 (BFO) on the construction and photocatalytic activity of P-infused g-C3N4/U-BiFeO3 (U-BFO/PCN) heterostructured composite photocatalysts. Favorable formation of U-BFO/PCN composites was attained via urea-aided morphology-controlled hydrothermal synthesis of BFO followed by solvosonication-mediated fusion with already synthesized P-g-C3N4 to form U-BFO/PCN composites. The prepared bare and composite photocatalysts' morphological, textural, structural, optical, and photocatalytic performance were meticulously examined through various analytical characterization techniques and photodegradation of aqueous rhodamine B (RhB). Ellipsoids and flakes morphological structures were obtained for U-BFO and BFO, and their effects on the successful fabrication of the heterojunctions were also established. The U-BFO/PCN composite exhibits 99.2% efficiency within 20 min of visible-light irradiation, surpassing BFO/PCN (88.5%), PCN (66.8%), and U-BFO (26.1%). The pseudo-first-order kinetics of U-BFO/PCN composites is 2.41 × 10-1 min-1, equivalent to 2.2 times, 57 times, and 4.3 times of BFO/PCN (1.08 × 10-1 min-1), U-BFO, (4.20 × 10-3 min-1), and PCN, (5.60 × 10-2 min-1), respectively. The recyclability test demonstrates an outstanding photostability for U-BFO/PCN after four cyclic runs. This improved photocatalytic activity exhibited by the composites can be attributed to enhanced visible-light utilization and additional accessible active sites due to surface and electronic band modification of CN via P-doping and effective charge separation achieved via successful composites formation.
Assuntos
Bismuto , Fotólise , Rodaminas , Catálise , Bismuto/química , Rodaminas/química , Luz , Compostos Férricos/química , Compostos de Nitrogênio/química , Titânio/química , Processos Fotoquímicos , Nitrilas/química , Cinética , Grafite , Óxidos , Compostos de CálcioRESUMO
Chemical compounds, such as the CS gas employed in military operations, have a number of characteristics that impact the ecosystem by upsetting its natural balance. In this work, the toxicity limit and microorganism's reaction to the oxidative stress induced by O-chlorobenzylidenemalonitrile, a chemical found in CS gas, were assessed in relation to the green algae Chlorella pyrenoidosa. A number of parameters, including the cell growth curve, the percent inhibition in yield, the dry cell weight, the percentage viability and productivity of algal biomass flocculation activity, and the change in oxygen production, were analyzed in order to comprehend the toxicological mechanisms of O-chlorobenzylidenemalonitrile on algal culture. Using fluorescence and Fourier transform infrared spectroscopy (FTIR), the content of chlorophyll pigments was determined. The values obtained for pH during the adaptation period of the C. pyrenoidosa culture were between 6.0 and 6.8, O2 had values between 6.5 and 7.0 mg/L, and the conductivity was 165-210 µS/cm. For the 20 µg/mL O-chlorobenzylidenemalonitrile concentration, the cell viability percentage was over 97.4%, and for the 150 µg/mL O-chlorobenzylidenemalonitrile concentration was 74%. The ECb50 value for C. pyrenoidosa was determined from the slope of the calibration curve; it was estimated by extrapolation to the value of 298.24 µg/mL. With the help of this study, basic information on the toxicity of O-chlorobenzylidenemalonitrile to aquatic creatures will be available, which will serve as a foundation for evaluating the possible effects on aquatic ecosystems. The management of the decontamination of the impacted areas could take the results into consideration.
RESUMO
Glass-fiber-reinforced polymer (GFRP) composites are widely used due to their high strength-to-weight ratio and corrosion resistance. However, their properties can degrade under different environmental conditions, affecting long-term reliability. This study examines the effects of temperature and chemical environments on GFRP pipes. Specimens were exposed to salt water and alkaline solutions at 20 °C and 50 °C. Diffusion coefficients and tensile and flexural properties were measured. Advanced techniques (TGA, FT-IR, and XRD) showed a 54.73% crystallinity difference between samples at 20 °C/air and 50 °C/salt water. Elevated temperatures and alkaline conditions accelerated degradation, with diffusion coefficients 68.38% higher at 50 °C/salt water compared to at 20 °C/salt water. Flexural strength decreased by 47.65% and tensile strength by 13.89%, at 50 °C/alkaline compared to 20 °C/air. Temperature was identified as the primary factor affecting mechanical performance, while alkaline environments significantly influenced tensile and flexural modulus. These results underscore the importance of considering environmental factors for the durability of GFRP composites.
RESUMO
Synthetic organic pigments like xanthene and azo dyes from the direct discharge of textile effluents are considered colossal global issues and attract the concern of scholars. Photocatalysis continues to be a very valuable pollution control method for industrial wastewater. Incorporations of metal oxide catalysts such as zinc oxide (ZnO) on mesoporous Santa Barbara Armophous-15 (SBA-15) support to improve catalyst thermo-mechanical stability have been comprehensively reported. However, charge separation efficiency and light absorption of ZnO/SBA-15 continue to be limiting its photocatalytic activity. Herein, we report a successful preparation of Ruthenium-induced ZnO/SBA-15 composite via conventional incipient wetness impregnation technique with the aim of boosting the photocatalytic activity of the incorporated ZnO. Physicochemical properties of the SBA-15 support, ZnO/SBA-15, and Ru-ZnO/SBA-15 composites were characterized by X-ray diffraction (XRD), N2 physisorption isotherms at 77 K, Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray (EDS), and transmission electron microscopy (TEM). The characterization outcomes exhibited that ZnO and ruthenium species have been successfully embedded into SBA-15 support, andtheSBA-15 support maintains its structured hexagonal mesoscopic ordering in both ZnO/SBA-15 and Ru-ZnO/SBA-15 composites. The photocatalytic activity of the composite was assessed through photo-assisted mineralization of aqueous MB solution, and the process was optimized for initial dye concentration and catalyst dosage. 50 mg catalyst exhibited significant degradation efficiency of 97.96% after 120 min, surpassing the efficiencies of 77% and 81% displayed by 10 and 30 mg of the as-synthesized catalyst. The photodegradation rate was found to decrease with an increase in the initial dye concentration. The superior photocatalytic activity of Ru-ZnO/SBA-15 over the binary ZnO/SBA-15 may be attributed to the slower recombination rate of photogenerated charges on the ZnO surface with the addition of ruthenium.
RESUMO
Synthetic organic pigments from the direct discharge of textile effluents are considered as colossal global concern and attract the attention of scholars. The efficient construction of heterojunction systems involving precious metal co-catalysis is an effective strategy for obtaining highly efficient photocatalytic materials. Herein, we report the construction of a Pt-doped BiFeO3/O-g-C3N4 (Pt@BFO/O-CN) S-scheme heterojunction system for photocatalytic degradation of aqueous rhodamine B (RhB) under visible-light irradiation. The photocatalytic performances of Pt@BFO/O-CN and BFO/O-CN composites and pristine BiFeO3 and O-g-C3N4 were compared, and the photocatalytic process of the Pt@BFO/O-CN system was optimized. The results exhibit that the S-scheme Pt@BFO/O-CN heterojunction has superior photocatalytic performance compared to its fellow catalysts, which is due to the asymmetric nature of the as-constructed heterojunction. The as-constructed Pt@BFO/O-CN heterojunction reveals high performance in photocatalytic degradation of RhB with a degradation efficiency of 100% achieved after 50 min of visible-light irradiation. The photodegradation fitted well with pseudo-first-order kinetics proceeding with a rate constant of 4.63 × 10-2 min-1. The radical trapping test reveals that h+ and â¢O2- take the leading role in the reaction, while the stability test reveals a 98% efficiency after the fourth cycle. As established from various interpretations, the considerably enhanced photocatalytic performance of the heterojunction system can be attributed to the promoted charge carrier separation and transfer of photoexcited carriers, as well as the strong photo-redox ability established. Hence, the S-scheme Pt@BFO/O-CN heterojunction is a good candidate in the treatment of industrial wastewater for the mineralization of organic micropollutants, which pose a grievous threat to the environment.
RESUMO
The aim of the study was to prepare effective low-cost green adsorbents based on spent black tea leaves for the removal of nitrate ions from aqueous solutions. These adsorbents were obtained either by thermally treating spent tea to produce biochar (UBT-TT), or by employing the untreated tea waste (UBT) to obtain convenient bio-sorbents. The adsorbents were characterized before and after adsorption by Scanning Electron Microscopy (SEM), Energy Dispersed X-ray analysis (EDX), Infrared Spectroscopy (FTIR), and Thermal Gravimetric Analysis (TGA). The experimental conditions, such as pH, temperature, and nitrate ions concentration were studied to evaluate the interaction of nitrates with adsorbents and the potential of the adsorbents for the nitrate removal from synthetic solutions. The Langmuir, Freundlich and Temkin isotherms were applied to derive the adsorption parameters based on the obtained data. The maximum adsorption intakes for UBT and UBT-TT were 59.44 mg/g and 61.425 mg/g, respectively. The data obtained from this study were best fitted to the Freundlich adsorption isotherm applied to equilibrium (the values R2 = 0.9431 for UBT and R2 = 0.9414 for UBT-TT), this assuming the multi-layer adsorption onto a surface with a finite number of sites. The Freundlich isotherm model could explain the adsorption mechanism. These results indicated that UBT and UBT-TT could serve as novel biowaste and low-cost materials for the removal of nitrate ions from aqueous solutions.
RESUMO
The removal yield of organic substances present in water depends on the environmental conditions, on the chemical composition of the water and on the chemical substance dissolved in the water, which constitutes the substrate of the metabolic activities of the microalgae that use these substances in the biochemical reactions of cellular enzyme complexes. o-Chlorobenzylidene malononitrile (CS, to use its military designation) was synthesized in-house, for research purposes, by a condensing reaction between o-chlorobenzaldehide and malononitrilein the presence of diethylamine. The detection, identification and confirmation of o-chlorobenzylidenemalononitrile (coded CBM in this experimental study) was performed using gas chromatography-mass spectrometry (GC-MS) and the purity of CBM was 99%. The biodegradation capacity in the samples that contained the biological suspension, after 24 h and 96 h of incubation, was determined via GC-MS analysis, and no evidence of the presence of CBM or some metabolites of CBM was detected. In the parallel samples, a hydrolysis process of CBM at room temperature, without biological treatment, revealed two main metabolites, malononitrile and o-chlorobenzaldehyde, respectively. This study is focused on evaluating the biodegradation capacity of o-chlorobenzylidene malononitrile in the presence of a biological material, culture of Chlorella sp., in comparison with a classical hydrolysis process. The tests performed indicate that the suspension of Chlorella sp. consumed the entire amount of CBM and metabolites from the analyzed samples. The tests prove that the biological material can be used to decontaminate the affected areas.
RESUMO
A sol-gel synthesis technique was employed for the preparation of anatase phase {001}-TiO2/Au hybrid nanocomposites (NCs). The scalable, schematic, and cost-efficient method was successfully modified using HF and NH4OH capping agents. The photocatalytic activity of the as-synthesized {001}-TiO2/Au NCs were tested over 2-cycle degradation of methylene blue (MB) dye and pharmaceutical active compounds (PhACs) of ibuprofen and naproxen under direct sunlight illumination at 35 °C and 44,000 lx. Transmission electron microscopy (TEM), high resolution transmission electron microscopy (HR-TEM), fast Fourier transform (FFT), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDS), and ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS) were employed for the characterization of the as-prepared sample. The characterization results from the TEM, XPS, and XRD studies established both the distribution of Au colloids on the surface of TiO2 material, and the presence of the highly crystalline structure of anatase {001}-TiO2/Au NCs. Photodegradation results from the visible light irradiation of MB indicate an enhanced photocatalytic performance of Au/TiO2 NCs over TiO2. The results from the photocatalytic activity test performed under direct sunlight exposure exhibited promising photodegradation efficiencies. In the first cycle, the sol-gel synthesized material exhibited relatively better efficiencies (91%) with the MB dye and ibuprofen, while the highest degradation efficiency for the second cycle was 79% for the MB dye. Pseudo first-order photodegradation rates from the first cycle were determined to be comparatively slower than those from the second degradation cycle.