Mass Spectrometry-Based Proteomics of Poly(methylmethacrylate)-Embedded Bone.

Liquid chromatography-tandem mass spectrometry (LC-MS/MS) is a widely employed technique in proteomics research for studying the proteome biology of various clinical samples. Hard tissues, such as bone and teeth, are routinely preserved using synthetic poly(methyl methacrylate) (PMMA) embedding resins that enable histological, immunohistochemical, and morphological examination. However, the suitability of PMMA-embedded hard tissues for large-scale proteomic analysis remained unexplored. This study is the first to report on the feasibility of PMMA-embedded bone samples for LC-MS/MS analysis. Conventional workflows yielded merely limited coverage of the bone proteome. Using advanced strategies of prefractionation by high-pH reversed-phase liquid chromatography in combination with isobaric tandem mass tag labeling resulted in proteome coverage exceeding 1000 protein identifications. The quantitative comparison with cryopreserved samples revealed that each sample preparation workflow had a distinct impact on the proteomic profile. However, workflow replicates exhibited a high reproducibility for PMMA-embedded samples. Our findings further demonstrate that decalcification prior to protein extraction, along with the analysis of solubilization fractions, is not preferred for PMMA-embedded bone. The biological applicability of the proposed workflow was demonstrated using samples of human PMMA-embedded alveolar bone and the iliac crest, which revealed anatomical site-specific proteomic profiles. Overall, these results establish a crucial foundation for large-scale proteomics studies contributing to our knowledge of bone biology.

Vitality of autologous retromolar bone grafts for alveolar ridge augmentation after a 3-months healing period: A prospective histomorphometrical analysis.

OBJECTIVES: The incorporation of retromolar bone grafts used for alveolar ridge augmentation is not well understood. This prospective observational study aims to supply histomorphometrical data from bone graft biopsies taken at the time of retrieval and after a 3-month healing period using patient-matched biopsies. MATERIALS AND METHODS: In 17 patients, trephine biopsies of the graft were acquired at the time of graft retrieval and after a 3-month healing period. The biopsies were compared histomorphometrically regarding the number of osteocytes, appearance of osteocyte lacunae, quantity, surface area, and activity of the Haversian canals. RESULTS: All grafts appeared clinically stable after screw removal and 17 implants were placed. Histomorphometric analysis revealed no significant difference in the number of osteocytes (p = .413), osteocyte lacunae (p = .611), the ratio of filled/empty osteocyte lacunae (p = .467) and active Haversian canals (p = .495) between the biopsies retrieved after a 3-months healing period with those at the time of grafting. The only significant difference was noted in the mean surface area of the Haversian canals (p = .002). Specifically, the grafts post 3-month healing showed a significantly larger mean area (0.069 mm2) compared to the time of grafting (0.029 mm2). CONCLUSION: This study demonstrates, compared to other data, a high rate of vital structures in retromolar bone block grafts after 3 months of healing, exhibiting the same histological features in comparison to the biopsies from the native alveolar ridge. Standard histomorphometrical parameters, e.g., the amount of filled or empty osteocyte lacunae for the description of the vitality of the graft need to be reappraised.

In vitro assessment of internal implant-abutment connections with different cone angles under static loading using synchrotron-based radiation.

BACKGROUND: The stability of implant-abutment connection is crucial to minimize mechanical and biological complications. Therefore, an assessment of the microgap behavior and abutment displacement in different implant-abutment designs was performed. METHODS: Four implant systems were tested, three with a conical implant-abutment connection based on friction fit and a cone angle < 12 ° (Medentika, Medentis, NobelActive) and a system with an angulated connection (< 40°) (Semados). In different static loading conditions (30 N - 90º, 100 N - 90º, 200 N - 30º) the microgap and abutment displacement was evaluated using synchrotron-based microtomography and phase-contrast radioscopy with numerical forward simulation of the optical Fresnel propagation yielding an accuracy down to 0.1 µm. RESULTS: Microgaps were present in all implant systems prior to loading (0.15-9 µm). Values increased with mounting force and angle up to 40.5 µm at an off axis loading of 100 N in a 90° angle. CONCLUSIONS: In contrast to the implant-abutment connection with a large cone angle (45°), the conical connections based on a friction fit (small cone angles with < 12°) demonstrated an abutment displacement which resulted in a deformation of the outer implant wall. The design of the implant-abutment connection seems to be crucial for the force distribution on the implant wall which might influence peri-implant bone stability.

Enhancing intraoral scanner accuracy using scan aid for multiple implants in the edentulous arch: An in vivo study.

OBJECTIVES: Intraoral scans of multiple implants in the edentulous arch are challenged by the absence of a distinct surface morphology between scan bodies. A scan aid was applied in such situation and evaluated for intraoral scanning accuracy in vivo. MATERIALS AND METHODS: 87 implants in 22 patients were scanned with scan aid (SA) and without scan aid (NO) using two different intraoral scanners (CS3600 [CS] and TRIOS3 [TR]). Master casts were digitized by a laboratory scanner. Virtual models were superimposed using an inspection software and Linear deviation and precision were measured. Statistical analysis was performed using linear mixed models (α = .05). RESULTS: Total mean linear deviation within the CS group was 189 µm without scan aid and 135 µm when using the scan aid. The TR group's total mean deviation was 165 µm with and without a scan aid. Significant improvement with scan aid was observed for the CS group (p = .001), and no difference was found in the TR group. 96% of scan bodies were successfully scanned in the TR-SA group compared to 86% for the TR-NO group, 83% for the CS-SA, and 70% for the CS-NO group, respectively. CONCLUSIONS: The evaluated scan aid improved linear deviation compared to unsplinted scans for the CS group but not for the TR group. These differences could originate from different scanning technologies used, active triangulation (CS) and confocal microscopy (TR). The scan aid improved the ability to recognize scan bodies successfully with both systems, which could have a favorable clinical impact overall.

Vestibuloplasty and its impact on the long-term survival and success of dental implants in irradiated and non-irradiated patients after head and neck tumor therapy: a retrospective study.

OBJECTIVES: This study aimed to evaluate the influence of vestibuloplasty on the clinical success and survival of dental implants in head and neck tumor patients. MATERIALS AND METHODS: A retrospective single-center study was conducted. All patients received surgical therapy of a tumor in the head or neck and underwent surgical therapy and, if necessary, radiotherapy/radiochemotherapy. Patients with compromised soft tissue conditions received vestibuloplasty using a split thickness skin graft and an implant-retained splint. Implant survival and success and the influence of vestibuloplasty, gender, radiotherapy, and localizations were evaluated. RESULTS: A total of 247 dental implants in 49 patients (18 women and 31 men; mean age of 63.6 years) were evaluated. During the observation period, 6 implants were lost. The cumulative survival rate was 99.1% after 1 year and 3 years and 93.1% after 5 years for patients without vestibuloplasty, compared to a survival and success rate of 100% after 5 years in patients with vestibuloplasty. Additionally, patients with vestibuloplasty showed significantly lower peri-implant bone resorption rates after 5 years (mesial: p = 0.003; distal: p = 0.001). CONCLUSION: This study demonstrates a high cumulative survival and success rate of dental implants after 5 years in head and neck tumor patients, irrespective of irradiation. Patients with vestibuloplasty showed a significantly higher rate of implant survival and significantly lower peri-implant bone resorption after 5 years. CLINICAL RELEVANCE: Vestibuloplasty should always be considered and applied if required by the anatomical situations to achieve high implant survival/success rates in head and neck tumor patients.

In vitro scanning accuracy using different aids for multiple implants in the edentulous arch.

OBJECTIVES: Optical impressions of implants in the edentulous arch are challenged by the absence of distinct surface morphology between multiple implant scan bodies. The purpose of this in vitro study was to evaluate a newly developed scan aid in various designs and colors to improve the accuracy of multi-implant scans. MATERIALS AND METHODS: A universal scan aid in three different designs (circular, square, irregular) and three different materials (colors: beige, gray, white) was applied to the implant scan bodies of a master model of six implants in an edentulous maxilla. Ten scans using an intra-oral scanner of each scan aid were acquired. Reference scanning was performed using a desktop optical scanner. Alignment of scans was performed at the first scan body in a three-dimensional modeling and inspection software and deviations for trueness and precision were calculated using the signed nearest-neighbor method and then statistically analyzed (α = .05). RESULTS: Overall, the beige irregular scan aid had the highest trueness and showed significant differences compared to unsplinted scans. The precision showed more heterogenous results and decreased when using the scan aid. Ease of use was observed with the irregular gray scan aid due to its increased elongation at break. CONCLUSIONS: The evaluated scan aid led to improved trueness when compared to unsplinted scans. Even though the irregular design in beige color showed highest trueness, the poor fracture strength of the tested material requires further improvement.

Impact of radiographic field-of-view volume on alignment accuracy during virtual implant planning: A noninterventional retrospective pilot study.

OBJECTIVE: To evaluate the impact of reducing the radiographic field of view (FOV) on the trueness and precision of the alignment between cone beam computed tomography (CBCT) and intraoral scanning data for implant planning. MATERIALS AND METHODS: Fifteen participants presenting with one of three clinical scenarios: single tooth loss (ST, n = 5), multiple missing teeth (MT, n = 5) and presence of radiographic artifacts (AR, n = 5) were included. CBCT volumes covering the full arch (FA) were reduced to the quadrant (Q) or the adjacent tooth/teeth (A). Two operators, an expert (exp) in virtual implant planning and an inexperienced clinician, performed multiple superimpositions, with FA-exp serving as a reference. The deviations were calculated at the implant apex and shoulder levels. Thereafter, linear mixed models were adapted to investigate the influence of FOV on discrepancies. RESULTS: Evaluation of trueness compared to FA-exp resulted in the largest mean (AR-A: 0.10 ± 0.33 mm) and single maximum discrepancy (AR-Q: 1.44 mm) in the presence of artifacts. Furthermore, for the ST group, the largest mean error (-0.06 ± 0.2 mm, shoulder) was calculated with the FA-FOV, while for MT, with the intermediate volume (-0.07 ± 0.24 mm, Q). In terms of precision, the mean SD intervals were ≤0.25 mm (A-exp). Precision was influenced by FOV volume (FA < Q < A) but not by operator expertise. CONCLUSIONS: For single posterior missing teeth, an extended FOV does not improve registration accuracy. However, in the presence of artifacts or multiple missing posterior teeth, caution is recommended when reducing FOV.

Accuracy of intraoral scans: An in vivo study of different scanning devices.

STATEMENT OF PROBLEM: The accuracy of intraoral scanners is a prerequisite for the fabrication of dental restorations in computer-aided design and computer-aided manufacturing (CAD-CAM) dentistry. While the precision of intraoral scanners has been investigated in vitro, clinical data on the accuracy of intraoral scanning (IOS) are limited. PURPOSE: The purpose of this clinical study was to determine the accuracy of intraoral scanning with different devices compared with extraoral scanning. MATERIAL AND METHODS: An experimental appliance was fabricated for 11 participants and then scanned intraorally and extraorally with 3 different intraoral scanners and a reference scanner. Intraoral and extraoral scans were subdivided into complete-arch and short-span scans and compared with the reference scan to assess trueness. Repeated scans in each group were assessed for precision. RESULTS: Precision and trueness were higher for extraoral scans compared with intraoral scans, except for complete-arch scans with 1 intraoral scanner. The median precision of short-span scans was higher (extraoral: 22 to 29 µm, intraoral: 23 to 43 µm) compared with complete-arch scans (extraoral: 81 to 165 µm, intraoral: 80 to 198 µm). The median trueness of short-span scans (extraoral: 28 to 40 µm, intraoral: 38 to 47 µm) was higher than that of complete-arch scans (extraoral: 118 to 581 µm, intraoral: 147 to 433 µm) for intraoral and extraoral scanning. CONCLUSIONS: Intraoral conditions negatively influenced the accuracy of the scanning devices, which was also reduced for the complete-arch scans.

Digital implantology-a review of virtual planning software for guided implant surgery. Part II: Prosthetic set-up and virtual implant planning.

BACKGROUND: Patient- and technology-related parameters influence the successful implementation of virtual implant planning and guided implant surgery. Besides data processing and computer aided design of drill guides as described in Part I, the possibilities and limitations for prosthetic set-up and virtual implant planning are essential (Part II). METHODS: The following software systems were examined using two different clinical situations for implant therapy: coDiagnostiX™, DentalWings, Canada (CDX); Simplant Pro™, Dentsply, Sweden (SIM); Smop™, Swissmeda, Switzerland (SMP); NobelClinician™, Nobel Biocare, Switzerland (NC); Implant Studio, 3Shape, Denmark (IST). Assessment criteria geared towards interfaces and integrated tools for prosthetic set-up and virtual implant planning. RESULTS: A software interface for an individual virtual prosthetic set-up was provided by two systems (CDX, IST), whereas the set-up of standardized teeth was provided by four systems (CDX, SIM, SMP, IST). Alternatively, a conventional set-up could be scanned and imported. One system could solely work with the digitization of a conventional set-up for virtual implant planning (NC). Stock abutments could be displayed for implant planning, but none of the tested software systems provided tools for the design of an individual abutment. All systems displayed three-dimensional reconstructions or two-dimensional cross-sections with varying orientation for virtual implant placement. The inferior alveolar nerve could be marked to respect a minimum distance between the nerve and the planned implant. Three implant planning systems provided a library to display more than 50 implant systems (CDX, SIM, IST), one system provided 33 implant systems (SMP) and one implant system provided 4 implant systems (NC). CONCLUSION: Depending on the used software system, there are limited options for a virtual set-up, virtual articulators and the display of a virtual prosthetic set-up. The implant systems used by the clinician is important for the decision which software system to choose, as there is a discrepancy between available implant systems and the number of supported systems in each software.

Retrospective long-term clinical evaluation of implant-prosthetic rehabilitations after head and neck cancer therapy.

OBJECTIVE: To assess clinical and patient-reported outcomes of implant-prosthetic rehabilitations in patients with a history of head-neck cancer (HNC), treated with tumor resection without (TR) or with adjuvant radiotherapy (TR/RT). A healthy cohort rehabilitated with the same reconstructive protocols served as control group (C). MATERIALS AND METHODS: A total of 28 women and 29 men were considered in the present retrospective study. Participants received 322 implants, finally supporting 79 prosthetic reconstructions. Primary outcome was the assessment of implant and prosthetic survival rates. Furthermore peri-implant soft tissue parameters (attached peri-implant mucosa, AM; modified bleeding and plaque indices, mBI/mPI; probing depth, PD) and prosthetic technical complications were documented. Patient-reported outcome measures (PROMs) by means of visual analog scales (VAS) and the Oral Health Impact Profile German 14 form (OHIP G14) were collected. For statistical purposes Chi-square and Mann-Whitney-U-Test were adapted. RESULTS: After a mean follow-up of 81.2 ± 50.3 months, implant survival rate was 98.1% (HNC-TR), 98.2% (HNC-TR/RT) and 100.0% (C), respectively (four implants failed in the HNC groups). HNC-TR/RT showed significant higher mPI and mBI compared to C. Within HNC-TR/RT, vestibuloplasty significantly reduced mBI and PD values. No failures occurred at the prosthetic level. Overall, higher VAS scores were reported for bar- compared with Locator-retained prostheses. Furthermore, increased OHIP G14 values resulted for HNC-TR/RT. CONCLUSIONS: High survival rates on implant and prosthetic level were observed. The use of soft tissue grafts resulted in stabilization of the peri-implant mucosa in irradiated patients. In terms of retention and chewing ability, participants preferred bars over Locator attachments.

Distribution and Chemical Speciation of Exogenous Micro- and Nanoparticles in Inflamed Soft Tissue Adjacent to Titanium and Ceramic Dental Implants.

Degradation of the implant surface and particle release/formation as an inflammation catalyst mechanism is an emerging concept in dental medicine that may help explain the pathogenesis of peri-implantitis. The aim of the present study was a synchrotron-based characterization of micro- and nanosized implant-related particles in inflamed human tissues around titanium and ceramic dental implants that exhibited signs of peri-implantitis. Size, distribution, and chemical speciation of the exogenous micro- and nanosized particle content were evaluated using synchrotron µ-X-ray fluorescence spectroscopy (XRF), nano-XRF, and µ-X-ray absorption near-edge structure (XANES). Titanium particles, with variable speciation, were detected in all tissue sections associated with titanium implants. Ceramic particles were found in five out of eight tissue samples associated with ceramic implants. Particles ranged in size from micro- to nanoscale. The local density of both titanium and ceramic particles was calculated to be as high as ∼40 million particles/mm3. µ-XANES identified titanium in predominantly two different chemistries, including metallic and titanium dioxide (TiO2). The findings highlight the propensity for particle accumulation in the inflamed tissues around dental implants and will help in guiding toxicological studies to determine the biological significance of such exposures.

Fully guided implant surgery using Magnetic Resonance Imaging - An in vitro study on accuracy in human mandibles.

OBJECTIVES: The objective of this in vitro study was to assess the accuracy of fully guided implant placement following virtual implant planning based on MRI. MATERIAL AND METHODS: Sixteen human cadaver hemimandibles with single missing teeth (n = 3), partially edentulous (n = 6) and edentulous situations (n = 7) were imaged using MRI. MRI and optical scans obtained with an intraoral scanner, were imported into an implant planning software. Virtual prosthetic and implant planning were performed regarding hard- and soft-tissue anatomy. Drill guides were manufactured, and fully guided implant placement was performed. Buccal and lingual bone and implant nerve distance were measured by three examiners in preoperative MRI and postoperative CBCT. The implant position was assessed using a software for deviation of implant positions displayed in CBCT and optical scans, respectively. RESULTS: MRI displayed relevant structures for implant planning such as cortical and cancellous bone, inferior alveolar nerve and neighboring teeth. Implant planning, CAD/CAM of drill guides and guided implant placement were performed. Deviations between planned and actual implant positions in postoperative CBCT and optical scans were 1.34 mm (SD 0.84 mm) and 1.03 mm (SD 0.46 mm) at implant shoulder; 1.41 mm (SD 0.88 mm) and 1.28 mm (SD 0.52 mm) at implant apex, and 4.84° (SD 3.18°) and 4.21° (SD 2.01°). Measurements in preoperative MRI and postoperative CBCT confirmed the compliance with minimum distances of implants to anatomical structures. CONCLUSIONS: Relevant anatomical structures for imaging diagnostics in implant dentistry are displayed with MRI. The accuracy of MRI-based fully guided implant placement in vitro is comparable to the workflow using CBCT.

Horizontal bone grafting using equine-derived cancellous bone blocks is associated with severe complications: A prospective clinical and histological pilot study.

AIMS: The aim of this prospective, clinical study was to evaluate the clinical performance and histological outcome of a new equine hydroxyapatite collagenated bone block (eHAC) for horizontal bone grafting prior to implant placement. MATERIALS AND METHODS: Five patients (two male/three female) with a mean age of 51.6 years (range 22-66 years) and a reduced horizontal bone width of the alveolar ridge (mean 3.5 mm) underwent horizontal bone grafting using eHAC at 10 grafting sites. Reentry was performed 6.9 months after the horizontal grafting procedure. Clinical follow-up (mean 28.9 month) considered width gain of the alveolar ridge, soft tissue healing, and complications. To evaluate graft incorporation, four additional patients underwent histological assessment of equine blocks adjacent to autologous blocks 3 and 6 months after grafting. RESULTS: The study was terminated after graft failure was observed in four of five patients. Mean horizontal bone width had increased by 3.6 ± 1.22 mm. Three out of nine implants placed had to be removed due to graft failure. Histological evaluation revealed large amounts of soft connective tissue within the grafts (mean 67.3 ± 9.5%). The proportion of new bone formation 3 months after the lateral grafting procedure revealed an average of 8.6%, compared to 11.4% after 6 to 7 months. CONCLUSION: Lateral ridge grafting using eHAC achieved measurable horizontal width gain but revealed high rates of severe complications. CLINICAL IMPLICATIONS: Within the limitations of this study, eHAC bone blocks cannot be recommended for horizontal bone grafting.

Virtual implant planning and fully guided implant surgery using magnetic resonance imaging-Proof of principle.

OBJECTIVES: To present a workflow of virtual implant planning and guided implant surgery with magnetic resonance imaging (MRI) and virtual dental models without the use of ionizing radiation. METHODS: Five patients scheduled for implant placement underwent an MR examination at three Tesla using individualized 2D and 3D turbo spin-echo (TSE) sequences and dedicated head coils. The MRI data and virtual dental models derived from either optical model scans or intraoral scans were imported to a virtual implant planning software (coDiagnostiX, Dental Wings, Montreal, Canada). Virtual prosthetic planning and implant planning were performed regarding the hard and soft tissue anatomy. A drill guide was designed on the virtual dental model using computer-aided design (CAD) and manufactured in-house, using a 3D printer (Eden 260V, Stratasys, Eden Prairie, MN, USA). RESULTS: The MRI displayed all relevant anatomical structures for dental implant planning such as cortical and cancellous bone, floor of the nasal and maxillary sinus, inferior alveolar nerve and neighboring teeth. The manual alignment of virtual dental models with the MRI was possible using anatomical landmarks. Dental implant planning, CAD/CAM of a drill guide and fully guided implant placement were successfully performed. CONCLUSIONS: Guided implant surgery is feasible with MRI without ionizing radiation. Further studies will have to be conducted to study the accuracy of the presented protocol and compare it to the current workflow of guided surgery using CBCT.

Characterization of macrophages infiltrating peri-implantitis lesions.

OBJECTIVES: The mechanisms involved in the initiation and progression of peri-implantitis lesions are poorly understood. It was the aim to determine the content and activation status of macrophages present in human peri-implantitis lesions and compare the current findings with the macrophage polarization associated with periodontitis lesions. MATERIAL AND METHODS: A total of 14 patients were studied in this investigation. Seven were soft tissue biopsies from dental implants affected by peri-implantitis that required explantation. Seven biopsies were from chronic periodontal disease. Immunofluorescence stains were performed using biomarkers to identify macrophages (CD68+ ) undergoing M1 polarization (iNOS+ ) and M2 polarization (CD206+ ), along with Hoechst 33,342 to identify DNA content. All samples were stained and photographed, and double-positive cells for CD68 and iNOS or CD68 and CD206 were quantified. RESULTS: All peri-implantitis biopsies examined revealed a mixed population of macrophages undergoing M1 polarization and M2 polarization. Further analysis demonstrated the co-expression of iNOS and CD206, which indicates the presence of a heterogenic immune response on peri-implantitis lesions. Macrophage polarization in peri-implantitis lesions presents a distinct pattern than in periodontitis. We observed a significant increase in the population of M1 macrophages on peri-implantitis samples compared to periodontal disease samples. CONCLUSION: Our results demonstrate that peri-implantitis has higher numbers of macrophages displaying a distinct macrophage M1 polarization signature compared to periodontitis lesions. This pattern may explain, in part, the distinct nature of peri-implantitis progression vs. periodontitis in humans.

WITHDRAWN: Synchrotron-based Radiography of Conical- vs. Butt-joint Implant Abutment Connections.

Ahead of Print article withdrawn by publisher.

A review of virtual planning software for guided implant surgery - data import and visualization, drill guide design and manufacturing.

BACKGROUND: Virtual implant planning systems integrate (cone beam-) computed tomography data to assess bone quantity and virtual models for the design of the implant-retained prosthesis and drill guides. Five commercially available systems for virtual implant planning were examined regarding the modalities of integration of radiographic data, virtual dental models and the design of drill guides for guided implant surgery. The purpose of this review was to describe the limitations of these available systems regarding the import of imaging data and the design and fabrication of a drill guide. METHODS: The following software systems were examined regarding the import of imaging data and the export of the virtual implant planning for the design and fabrication of a drill guide with the help of two clinical situations requiring dental implant therapy: coDiagnostiX™, DentalWings, Canada (CDX); Simplant Pro™, Dentsply, Sweden (SIM); Smop™, Swissmeda, Switzerland (SMP); NobelClinician™, Nobel Biocare, Switzerland (NC); Implant Studio, 3Shape, Denmark (IST). Assessment criteria included data formats and management as well as the workflow for the design and production of drill guides. RESULTS: All systems have a DICOM-interface ("Digital Imaging and Communication in Medicine") for the import of radiographic data. Imaging artefacts could be reduced but not eliminated by manual data processing. The import of virtual dental models in a universal format (STL: Standard Tesselation Language) was possible with three systems; one system could only be used with a proprietary data format. All systems display three-dimensional surface models or two-dimensional cross-sections with varying orientation for virtual implant planning. Computer aided design and manufacturing (CAD/CAM) of drill guides may be performed by the user with the help of default parameters or solely by the provider of the software and thus without the influence of the clinician. CONCLUSION: Data bases of commonly used implant systems are available in all tested software, however not all systems allow to plan and execute fully guided implant placement. An individual design and in-house manufacturing of the drill guide is only available in some software systems. However, at the time of publication most recent software versions showed flexibility in individual design and in-house manufacturing of drill guides.

Differential osteopontin expression in human osteoblasts derived from iliac crest and alveolar bone and its role in early stages of angiogenesis.

In our previous study, we revealed significant differences of osteopontin (OPN) gene expression in primary human osteoblasts (HOBs) derived from iliac crest bone (iHOBs) and alveolar bone (aHOBs). The present study aims at assigning this discriminative expression to a possible biologic function. OPN is known to be involved in several pathologic and physiologic processes, among others angiogenesis. Therefore, we studied the reaction of human umbilical vein endothelial cells (HUVECs) to HOB-derived OPN regarding angiogenesis. To this end, human primary explant cultures of both bone entities from ten donors were established. Subsequent transcription analysis detected higher gene expression of OPN in iHOBs compared to aHOBs, thereby confirming the results of our previous study. This difference was particularly apparent when cultures were derived from female donors. Hence, OPN protein expression as well as the angiogenic potential of OPN was analyzed, originating from HOBs of one female donor. In accordance to the gene expression level, secreted OPN was more abundant in the supernatant of iHOBs than in aHOBs. Moreover, secreted OPN was found to stimulate migration of HUVECs, but not proliferation or tube formation. These results indicate an involvement in very early stages of angiogenesis and a functional distinction of OPN from HOBs derived from different bone entities.

Fifteen Years of Platelet Rich Fibrin in Dentistry and Oromaxillofacial Surgery: How High is the Level of Scientific Evidence?

Platelet-rich fibrin is a blood concentrate system used for soft tissue and bone tissue regeneration. In the last decade, platelet rich fibrin (PRF) has been widely used in different indication fields, particularly in oral and maxillofacial surgery. This review investigates the level of scientific evidence of published articles related to the use of PRF for bone and soft tissue regeneration in dentistry and maxillofacial surgery. An electronic literature research using the biomedical search engine "National Library of Medicine" (PubMed-MEDLINE) was performed in May 2017. A total of 392 articles were found, 72 of which were classified for each indication field. When comparing PRF with biomaterials vs biomaterial alone in sinus lift (5 studies; IIa), no statistically significant differences were detected. Socket preservation and ridge augmentation using PRF significantly enhanced new bone formation compared to healing without PRF (7 studies Ib, IIa, IIb). Reepithelialization and bone regeneration was achieved in 96 of 101 patients diagnosed with medication-related osteonecrosis of the jaw (5 studies, III). In periodontology, PRF alone (6 studies; Ib, IIa, IIb) or its combination with biomaterials (6 studies; Ib, IIa, IIb) significantly improved the pocket depth and attachment loss compared to a treatment without PRF. Over 70% of the patients were part of studies with a high level of scientific evidence (randomized and controlled prospective studies). This published evidence (38 articles), with a high scientific level, showed that PRF is a beneficial tool that significantly improves bone and soft tissue regeneration. However, the clinical community requires a standardization of PRF protocols to further examine the benefit of PRF in bone and soft tissue regeneration in reproducible studies, with a higher scientific level of evidence.

Registration of cone beam computed tomography data and intraoral surface scans - A prerequisite for guided implant surgery with CAD/CAM drilling guides.

OBJECTIVES: Guided implant surgery (GIS) is performed with drilling guides that are produced on the virtual tooth model using CAD/CAM technology. The prerequisite for this workflow is the alignment of patients cone beam computed tomography CBCT and surface scan (registration). Dental restorations may cause deteriorating imaging artifacts in CBCT data, which in turn can have an impact on the registration process. The influence of the user and the preprocessing of data and of image artifacts on the registration accuracy were examined. MATERIAL AND METHODS: CBCT data and intraoral surface scans of 36 patients were used for virtual implant planning in coDiagnostiX (Dentalwings, Montreal, Canada). CBCT data were reconstructed to a three-dimensional anatomical model with the default settings provided by the software and also manually by four different examiners. Subsequently, the CBCT and intraoral surface models were registered by each examiner with the help of anatomical landmarks. Patients' data were subdivided into four groups (A-D) according to the number of metallic restorations: A = 0-2 restorations, B = 3-5 restorations, C = 6-8 restorations and D > 8 restorations. After registration, the distances between CBCT and dental surface models were measured. Linear regression models were used to assess the influence of the segmentation, the examiner and to the number of restorations (P < 0.05). RESULTS: The deviations between surface scan and CBCT models accounted to 0.54 mm (mean). The mean deviations were 0.69 mm (max. 24.8 mm) and 0.4 mm (max. 9.1 mm) for default and manual segmentation, respectively. Mean deviations of 0.36 mm (Group A), 0.43 mm (Group B), 0.67 mm (Group C) and 1.01 mm (Group D) were recorded. The segmentation (P = 0.000), the user (P = 0.0052) and the number of restorations (P = 0.0337) had a significant influence on the registration accuracy. CONCLUSIONS: The deviation between CBCT and surface scan model resulting from inaccurate registration is transferred to the surgical field and results in a deviation between the planned and actual implant position. The registration accuracy in commercial virtual implant planning software is significantly influenced by the preprocessing of imported data, by the user and by the number of restorations resulting in clinically non-acceptable deviations encoded in drilling guides.