Valorisation of Fruits, their Juices and Residues into Valuable (Nano)materials for Applications in Chemical Catalysis and Environment.

One of the most abundant wastes from all around the world is nutrient resources. Among them, fruits, their extracts, and residues comprise a major portion, which contain many valuable components that get lost during disposal or become burden on the shrinking landfills. These concerns are addressed by seeking sustainable processing methods that would have a minimal environmental impact. The crops contain renewable chemicals which are useful for catalysis, wastewater treatment, or preparation of nanomaterials; there has been an upsurge for the industrial applications of (nano)materials as their environmental and catalytic appliances is a fascinating subject to design cheaper and safer catalytic systems. Due to the excellent chemical properties of the fruit extracts, they have garnered attention as cost-effective catalysts and support materials. This review focuses on the preparation of (nano)materials and their catalytic and environmental applications and highlights the potential appliances and industrial benefits derived from these low-cost renewable and sustainable greener sources thus essentially converting waste into wealth.

Bionanocomposite MIL-100(Fe)/Cellulose as a high-performance adsorbent for the adsorption of methylene blue.

World production of dyes is estimated at more than 800,000 t·yr-1. The purpose of this research falls within the scope of the choice of an effective, local, and inexpensive adsorbent to remove dyes from wastewater. Adsorptive elimination of dyes by commonly accessible adsorbents is inefficient. The metal-organic frameworks (MOFs) are an important class of porous materials offering exceptional properties as adsorbents by improving separation efficiency compared to existing commercial adsorbents. However, its powder form limits its applications. One way to overcome this problem is to trap them in a flexible matrix to form a hierarchical porous composite. Therefore, in this work, we prepared MIL-100 (Fe) embedded in a cellulose matrix named MIL-100(Fe)/Cell, and used it as an adsorbent of methylene blue (MB) dye. According to the BET analysis, the specific surface area of the synthesized MOF is 294 m2/g which is related to the presence of the cellulose as efficient and green support. The structure of this composite is approximately hexagonal. Adsorption was studied as a function of contact time, adsorbent mass and pollutant load (concentration), and pH, and the effect of each of them on absorption efficiency was optimized. The MIL-100(Fe)/Cell was capable of removing 98.94% of MB dye with an initial concentration of 150 mg/L within 10 min at pH = 6.5 and room temperature. The obtained maximum adsorption capacity was 384.615 mg/g. The adsorption isotherm is consistent with the Langmuir models. The mechanism of MB adsorption proceeds through п-п and electrostatic interactions.

Monitoring fish freshness with pH-sensitive hydrogel films containing quercetin or eucalyptol.

This research developed pH-sensitive smart films using carboxymethyl cellulose (CMC) and collagen (COL), combined with either quercetin (QCT) or eucalyptol (EUC), to prevent fish meat spoilage. COL, extracted from isinglass, was confirmed as type I through SDS-PAGE. The films were characterized using FESEM, FTIR, and TGA. The addition of QCT or EUC enhanced antioxidant levels to 60.16% and 70.83%, respectively, up from a baseline of 10.4%. It also increased tensile strength from 3.32 ± 0.22 to 11.8 ± 0.25 and 13.2 ± 0.27 MPa, and enhanced elongation at break from 5 ± 3.1% to 27.7 ± 1.1% and 30.15 ± 2.1%. Fish meat packaged with QCT showed a lower spoilage rate due to the antibacterial and antioxidant effects of EUC and QCT (TVBN = 7.37 ± 0.01), compared to CMC/COL film (TVBN = 10.11 ± 0.02) and non-packaged fish (TVBN = 11.23 ± 0.01). The films exhibit >80% transparency, highlighting their suitability for food packaging. CMC/COL/QCT is preferred for fish packaging because it offers better mechanical properties and lower TVB-N levels.

Facile synthesis of Cu NPs@Fe3O4-lignosulfonate: Study of catalytic and antibacterial/antioxidant activities.

Environmental pollution is one of the important concerns for human health. There are different types of pollutants and techniques to eliminate them from the environment. We hereby report an efficient method for the remediation of environmental contaminants through the catalytic reduction of the selected pollutants. A green method has been developed for the immobilization of copper nanoparticles on magnetic lignosulfonate (Cu NPs@Fe3O4-LS) using the aqueous extract of Filago arvensis L. as a non-toxic reducing and stabilizing agent. The characterization of the prepared Cu NPs@Fe3O4-LS was achieved by vibrating sample magnetometer (VSM), Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), high resolution TEM (HRTEM), X-ray diffraction (XRD), scanning TEM (STEM), thermogravimetry-differential thermal analysis (TG/DTA), fast Fourier transform (FFT), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron (XPS) analyses. The synthesized Cu NPs@Fe3O4-LS was applied as a magnetic and green catalyst in the reduction of congo red (CR), 4-nitrophenol (4-NP), and methylene blue (MB). The progress of the reduction reactions was monitored by UV-Vis spectroscopy. Finally, the biological properties of Cu NPs@Fe3O4-LS were investigated. The prepared catalyst demonstrated excellent catalytic efficiency in the reduction of CR, 4-NP, and MB in the presence of sodium borohydride (NaBH4) as the reducing agent. The appropriate magnetism of Cu NPs@Fe3O4-LS made its recovery very simple. The advantages of this process include a simple reaction set-up, high and catalytic antibacterial/antioxidant activities, short reaction time, environmentally friendliness, high stability, and easy separation of the catalyst. In addition, the prepared Cu NPs@Fe3O4-LS could be reused for four cycles with no significant decline in performance.

Progresses in chitin, chitosan, starch, cellulose, pectin, alginate, gelatin and gum based (nano)catalysts for the Heck coupling reactions: A review.

Heck cross-coupling reaction (HCR) is one of the few transition metal catalyzed CC bond-forming reactions, which has been considered as the most effective, direct, and atom economical synthetic method using various catalytic systems. Heck reaction is widely employed in numerous syntheses including preparation of pharmaceutical and biologically active compounds, agrochemicals, natural products, fine chemicals, etc. Commonly, Pd-based catalysts have been used in HCR. In recent decades, the application of biopolymers as natural and effective supports has received attention due to their being cost effective, abundance, and non-toxicity. In fact, recent studies demonstrated that biopolymer-based catalysts had high sorption capacities, chelating activities, versatility, and stability, which make them potentially applicable as green materials (supports) in HCR. These catalytic systems present high stability and recyclability after several cycles of reaction. This review aims at providing an overview of the current progresses made towards the application of various polysaccharide and gelatin-supported metal catalysts in HCR in recent years. Natural polymers such as starch, gum, pectin, chitin, chitosan, cellulose, alginate and gelatin have been used as natural supports for metal-based catalysts in HCR. Diverse aspects of the reactions, different methods of preparation and application of polysaccharide and gelatin-based catalysts and their reusability have been reviewed.

Polysaccharide-based (nano)materials for Cr(VI) removal.

Chromium is a potentially poisonous and carcinogenic species, which originates from human activities and various industries such as leather, steel, iron, and electroplating industries. Chromium is present in various oxidation states, among which hexavalent chromium (Cr(VI)) is highly toxic as a natural contaminant. Therefore, chromium, particularly Cr(VI), must be eliminated from the environment, soil, and water to overcome significant problems due to its accumulation in the environment. There are different approaches such as adsorption, ion exchange, photocatalytic reduction, etc. for removing Cr(VI) from the environment. By converting Cr(VI) to Cr(III), its toxicity is reduced. Cr(III) is essential for the human diet, even in small amounts. Today, biopolymers such as alginate, cellulose, gum, pectin, starch, chitin, and chitosan have received much attention for the removal of environmental pollutants. Biopolymers, particularly polysaccharides, are very useful compounds due to their OH and NH2 functional groups and some advantages such as biodegradability, biocompatibility, and accessibility. Therefore, they can be widely applied in catalytic applications and as efficient adsorbents for the removal of toxic compounds from the environment. This review briefly investigates the application of polysaccharide-based (nano)materials for efficient Cr(VI) removal from the environment using adsorption/reduction, photocatalytic, and chemical reduction mechanisms.

Biopolymer-derived (nano)catalysts for hydrogen evolution via hydrolysis of hydrides and electrochemical and photocatalytic techniques: A review.

Over the course of a few decades, the concern of environmental damages of fossil fuels, an increase in CO2 emission and a decrease of hydrogen have been growing more and more. Accordingly, hydrogen production is a crucial issue nowadays. Different polymers are applied to attain the purpose. Among all polymers, biodegradables polymers are the best choices to develop the main aim. Polysaccharides and proteins are biodegradable polymers with unique places and advantages with regards to their ecofriendly properties. There are different techniques to apply and achieve the foremost purpose. It is worthwhile to mention that green and facile methods are always attracting attention in different aspects and fields. The three non-polluting and economical techniques, that is, electrochemical hydrogen evolution reaction (HER), photocatalytic technique, and hydrolysis of hydrides, are reviewed in this paper. This review helps researchers, who are environment supporters, to evaluate and choose the most ecological biopolymers and processes in their work.

Recent progresses in the application of cellulose, starch, alginate, gum, pectin, chitin and chitosan based (nano)catalysts in sustainable and selective oxidation reactions: A review.

Exploitation of polymers as effective starting materials to produce various valuable catalysts is attracting the attention of industrial and academic researchers. Moreover, among all polymers, natural polysaccharides such as cellulose, starch, alginate, gum, pectin, chitin and chitosan have drawn the most attention in recent years due to their unique structural features and important potential applications. A lot of studies have been performed on the synthesis of polysaccharide based (nano)catalysts and their application in chemical transformations. The present review provides recent developments on polysaccharides as green resources for the production of (nano)catalysts. Herein, the application of polysaccharide based (nano)catalysts derived from different organisms, plants or animals in oxidative transformations has been reviewed. These compounds can be used as economical and recyclable catalytic materials for various oxidation reactions including oxidation of alcohols, phenols, sulfides etc. The challenges in the application of polysaccharide based (nano)catalysts have also been discussed.