RESUMO
Transformer is a well-known power system apparatus utilized in conjunction with solid insulations such as paper and press board, as well as liquid insulations like mineral oil, a petroleum-based fluid. Despite the notable drawbacks associated with mineral oil, such as limited resources for future generations and its non-eco-friendly nature, its usage remains ubiquitous. There is a growing imperative to explore alternative fluids that surpass mineral oil in terms of environmental impact and performance. Amidst the global shift towards green energy, this study focuses on vegetable seed oils such as corn oil, soybean oil, mustard oil, and rice bran oil as potential substitutes. The research evaluates these oils based on key transformer properties including breakdown voltage, water content, interfacial tension, viscosity, acidity, flash point, and fire point. Interestingly, rice bran oil and soybean oil exhibit promising characteristics that suggest they could effectively replace petroleum-based fluids in transformers. Furthermore, the study extends to blending mineral oil with vegetable seed oils in various compositions, incorporating natural and synthetic antioxidant additives ranging from 0 to 1%. Comparative analyses between samples with and without additives reveal that the inclusion of 1% propyl gallate yields outstanding performance improvements. For instance, a blend comprising 25 ml of mineral oil and 25 ml of soybean oil, supplemented with 1% propyl gallate, demonstrates 90% higher effectiveness compared to other blends and additives tested. Moreover, the research employs statistical regression analysis to establish relationships between different parameter variables, providing deeper insights into the performance and compatibility of these blended oils in transformer applications. This comprehensive investigation underscores the potential of vegetable seed oils as viable alternatives to mineral oil, contributing to the advancement of eco-friendly solutions in power systems.
RESUMO
To properly control the network of the power system and ensure its protection, Phasor measurement units (PMUs) must be used to monitor the network's operation. PMUs can provide synchronized real-time measurements. These measurements can be used for state estimation, fault detection and diagnosis, and other grid control applications. Conventional state estimation methods use weighting factors to balance the different types of measurements, and zero injection measurements can lead to large weighting factors that can introduce computational errors. The offered methods are designed to ensure that these zero injection criteria can be strictly satisfied while calculating the voltage profile and observability of the various distribution networks without sacrificing computing efficiency. The proposed method's viability is assessed using standard IEEE distribution networks. MATLAB coding is used to simulate the case analyses. Overall, the study provides a valuable contribution to the field of power distribution system monitoring and control by simplifying the process of determining the optimal locations for PMUs in a distribution network and assessing the impact of ZI buses on the voltage profile of the system.
Assuntos
Sistemas Computacionais , Tecnologia , InjeçõesRESUMO
Simulation and implementation of a single DC-link-based three-phase inverter are investigated in this article. The primary focus is on designing a single DC-link three-phase inverter for high power applications. Unlike conventional inverters that require 600 V to generate 400 V (RMS) at the output, the proposed system achieves this with only 330 V, facilitated by a 12-terminal 1:1 transformer. The system employs Proportional Integral (PI) and Neural Network (NN) controllers to optimize performance. Various Carrier-Based Pulse Width Modulation (CB-PWM) techniques, including Phase Disposition (PD), Phase Opposition Disposition (POD), and Alternative Phase Opposition Disposition (APOD), are implemented and evaluated based on Total Harmonics Distortion (THD) concerning the Modulation Index (MI) of the inverter. The proposed inverter achieves a THD reduction to 4.8%, demonstrating superior performance compared to recent studies. The system's performance is validated through extensive MATLAB/Simulink simulations and practical implementation using XILINX FPGA software, confirming the efficacy of the proposed design.