RESUMO
The aim of the study was to investigate the effect of the biochar (BC) dose on solvent extractable (Ctot) and freely dissolved (Cfree) polycyclic aromatic hydrocarbons (PAHs) content during co-composting. A significantly better reduction of Σ16 Ctot PAHs after 98 days occurred during composting with BC (for 1% of BC - 44% and for 5% of BC - 23%) than in the control (15%). Despite the relatively high reduction of Ctot PAHs in the experiment with 5% BC rate, the content of the PAHs was still the highest compared to other variants. Regarding Cfree PAHs, 5% rate of BC resulted in the best reduction of PAHs, while the 1% BC dose resulted in a lower reduction of Cfree than the control. For 1% BC, PAHs losses was more effective, and sequestration processes played a less significant role than in the experiment with 5% dose of BC. The total and dissolved organic carbon, and ash were predominantly responsible for Ctot and Cfree losses, and additionally pH for Cfree. The results of the experiment indicate that BC performs a crucial role in composting, affecting the Ctot and Cfree PAHs in the compost but the final effect strictly depends on the BC dose.
Assuntos
Compostagem , Hidrocarbonetos Policíclicos Aromáticos , Poluentes do Solo , Esgotos/química , Triticum , Hidrocarbonetos Policíclicos Aromáticos/química , Poluentes do Solo/química , Carvão Vegetal/química , Solo/químicaRESUMO
HIGHLIGHTS: Microplastics (MPs) and microrubbers (MRs) determined in lichens and mosses around Shiraz. In lichens, MPs mainly thin fibres up to 1 MP g-1; MRs were < 0.1 MP g-1. In mosses, abundances were similar but with a greater fraction of larger, non-fibrous particles. Larger MPs and MRs decreased in abundance with distance and elevation from Shiraz. Around Shiraz, the common moss, Grimmia critina, would be the most suitable biomonitor. Lichens and mosses have been employed as biomonitors of atmospheric particulate pollutants, like metals and industrial solids, for many decades. Here, we evaluated the potential of nine species of crustose and foliose lichens and a widely distributed moss (Grimmia critina) to act as biomonitors of airborne microplastics (MPs) and microrubbers (MRs). About 200 lichens and 40 mosses were sampled across different altitudinal transects in the vicinity of Shiraz City, southwest Iran, and MPs and MRs were quantified and characterised after sample peroxidation. In most species of lichen, MP and MR abundance overall was < 1 g-1 and < 0.1 g-1, respectively, and the majority of plastics were fibres of < 10 µm in diameter and < 1000 µm in length. Respective weight normalised abundances of MPs and MRs were similar in G. critina, but there were greater proportions of both larger (> 1000 µm) and non-fibrous particles among the MPs. In both lichens and moss, there was a greater number of larger MPs and MRs at locations closest to and at the same elevation as Shiraz than at more distant and elevated locations, suggesting an inverse relationship between particle size and distance travelled. Among the lichens, members of the genus Acarospora, with their areolated form, appeared to act as the most suitable biomonitors for MPs and MRs. Overall, however, the wide distribution of the moss, G. crinita, and its ability to intercept and accumulate a broader range of sizes and shapes of MPs and MRs make this species a better choice, at least in the type of environment studied.
Assuntos
Poluentes Atmosféricos , Briófitas , Líquens , Microplásticos , Líquens/química , Irã (Geográfico) , Microplásticos/análise , Poluentes Atmosféricos/análise , Briófitas/química , Monitoramento Ambiental/métodos , Monitoramento Biológico/métodos , Tamanho da PartículaRESUMO
Optimal manure treatment aimed at usage as agricultural soil fertilizers is a prerequisite ecological pollution control strategy. In this work, livestock manure-based fertilizers were collected from 71 animal farms across 14 provinces in China. The contamination levels and potential ecotoxicological risks of residual steroid estrogens (SEs): estrone (E1), estriol (E3), 17α-estradiol (17α-E2), 17ß-estradiol (17ß-E2) and xenoestrogen (XE) bisphenol A (BPA), were investigated. The results showed that the occurrence frequencies for SEs and XE ranged from 66.67% to 100%, and the mean concentration varied considerably across the study locations. The total content of SEs and XE in Hebei province was the highest, and swine manure-based fertilizers concentrations were higher than the levels reported in other animal fertilizers. Compared with farm level manure, manure-based fertilizers are processed by composting, and the micropollutants quantities are significantly reduced (mean: 87.65 - 534.02 µg/kg). The total estradiol equivalent quantity (EEQ) that might migrate to the soil was estimated to be 1.23 µg/kg. Based on the estimated application rate of manure, 38% of the fertilizers risk quotients exceeded 0.1, indicating medium to high risks pressure on terrestrial organisms. Nonetheless, the estrogenic risk was lower in manure-based fertilizers than in manure. This study highlights the significance of proper treatment of livestock manure and designing an optimal manure fertilization strategy to mitigate the risks posed by SEs and XEs to the agroecosystems.
Assuntos
Estrogênios , Esterco , Suínos , Animais , Estrogênios/análise , Esterco/análise , Fertilizantes/análise , Estradiol/análise , Solo/química , Monitoramento Ambiental/métodosRESUMO
Persistent free radicals (PFRs) in biochar can influence biochar reactivity, promoting organic contaminant degradation or even causing certain toxic impacts. However, the PFR generation mechanism is not still well understood. An investigation of the relationship between PFR formation and the chemical structure of biochar is essential for understanding the PFR formation mechanism. Our in situ measurement results showed that PFR intensities increased from 0-509.5 to 146-5678 a.u. after being pyrolyzed at 300 °C for 60 min. The significant positive correlation between PFR intensities and the peak areas of CâO and aromatic CâC groups indicated that the generation of PFRs was highly dependent on the CâO and aromatic CâC structures. The reduction of biochars by KBH4 resulted in a 32.2 ± 2.49% decrease in the CâO content and a relative increase in the C-O content, while other physicochemical properties did not change. Thus, the observed 49.3% decrease in PFR signals after this reduction suggested that the reducible CâO groups, possibly in aldehydes, aromatic ketones, and quinones, were closely associated with PFRs in biochars. This study provides an in situ insight into the PFR generation mechanism and guides the corresponding biochar design and property manipulation.
Assuntos
Carvão Vegetal , Lignina , Carvão Vegetal/química , Radicais Livres/químicaRESUMO
Despite the importance of agricultural soils, little is known about the fate of microplastics (MPs) in this environment. In the present study, MPs have been determined in soils and wind-eroded sediments from two vegetable-growing fields in the Fars province of Iran, one using plastic mulch for water retention (Field 1) and the other using wastewater for irrigation (Field 2). MPs were heterogeneously distributed in the surface (0-5 cm) and subsurface (5-15 cm) soils of both fields, with a maximum concentration overall of about 1.1 MP g-1 and no significant differences in concentrations between either fields or depths. Fibres represented the principal shape of MPs, but spherules, presumably from wastewater, also made a significant (â¼25%) contribution to MPs in Field 2. Analysis of selected samples by Raman spectroscopy and scanning electron microscopy revealed that polyethylene terephthalate (PET) and nylon were the most abundant polymers and that MPs exhibited varying degrees of weathering. Concentrations of MPs in this study are within the range reported previously for agricultural soils, although the absence of PET observed in earlier studies is attributed to the use of insufficiently dense solutions to isolate plastics. Deployment of a portable wind tunnel revealed threshold wind velocities for soil erosion of up to 7 and 12 m s-1 and MP erosion rates up to about 0.4 and 1.1 MP m-2 s-1 for Fields 1 and 2, respectively. Erosion rates are considerably greater than published depositional rates for MPs and suggest that agricultural soils act as both a temporary sink and dynamic secondary source of MPs that should be considered in risk assessments and global transport budgets.
Assuntos
Microplásticos , Solo , Agricultura , Plásticos/análise , Águas Residuárias/análiseRESUMO
The occurrence of microplastics (MPs) in soils can negatively affect soil biodiversity and function. Soil amendments applied to MP-contaminated soil can alter the overall soil properties and enhance its functions and processes. However, little is known about how soil amendments improve the quality of MP-contaminated soils. Thus, the present study used a microcosm experiment to explore the potential effects of four types of biochar on the chemical and microbial properties of low-density polyethylene (LDPE) MP-contaminated soil under both drought and well-watered conditions. The results show that the biochars altered soil pH, electrical conductivity (EC), available phosphorous, and total exchangeable cations (TEC) with some variability depending on the biochar type. Oilseed rape straw (OSR)-derived biochars increased soil pH, EC, and TEC under both water conditions with the highest values of 7.94, 0.54 dS m-1 and 22.0 cmol(+) kg-1, respectively. Soil enzyme activities varied under all treatments; in particular, under drought conditions, the fluorescein diacetate activity increased in soils with high temperature (700 °C) biochar. The application of soft wood pellet biochar (700 °C) to MP-contaminated soil increased urease activity by 146% under well-watered conditions. OSR-derived biochars significantly reduced soil acid phosphatase activity under both water conditions. With biochar supplementation, the diversity indices of the bacterial community increased in well-watered soil but not in soil under drought conditions. The abundance of bacterial phyla, such as Firmicutes, Proteobacteria, Actinobacteria, Dictyoglomi, and Gemmatimonadetes, was relatively high in all treatments. Biochar application resulted in negligible variations in bacterial communities under drought conditions but significant variations under well-watered conditions. The findings of this study imply that biochar can be used as a soil amendment to improve the overall soil quality of MP-contaminated soil, but its impact varies depending on the pyrolysis feedstock and temperature. Thus, selecting a suitable biochar is important for improving the soil quality in MP-contaminated soils.
Assuntos
Plásticos , Poluentes do Solo , Carvão Vegetal , Microplásticos , Solo/química , Poluentes do Solo/análiseRESUMO
Microplastics are emerging contaminants and there has been growing concern regarding their impacts on aquatic and terrestrial environments. This review provides a comprehensive overview of the current knowledge regarding the sources, occurrences, fates, and risks associated with microplastic contamination in terrestrial environments. This contamination occurs via multiple sources, including primary microplastics (including synthetic materials) and secondary microplastics (derived from the breakdown of larger plastic particles). Microplastic contamination can have both beneficial and detrimental effects on soil properties. Additionally, microplastics have been shown to interact with a wide array of contaminants, including pesticides, persistent organic pollutants, heavy metals, and antibiotics, and may act as a vector for contaminant transfer in terrestrial environments. Microplastics and their associated chemicals can be transferred through food webs and may accumulate across multiple trophic levels, resulting in potential detrimental health effects for humans and other organisms. Although several studies have focused on the occurrence and impacts of microplastic contamination in marine environments, their sources, fate, transport, and effects in terrestrial environments are less studied and not well understood. Therefore, further research focusing on the fate, transport, and impacts of microplastics in relation to soil properties, polymer composition and forms, and land-use types is needed. The development of standardized and harmonized methods for analyzing microplastics in soil-plant ecosystems is essential. Future work should also consider the many interactions of microplastics with soil quality and ecotoxicological impacts on biota in the context of global environmental change.
Assuntos
Microplásticos , Poluentes Químicos da Água , Ecossistema , Monitoramento Ambiental , Humanos , Microplásticos/toxicidade , Plásticos/toxicidade , Poluentes Químicos da Água/análiseRESUMO
Different pyrolysis conditions determine the properties of the biochar. The properties of biochar may affect directly or indirectly their influence on living organisms. The aim of this study was to determine the toxicity of biochar obtained under different conditions (temperature: 500 or 700 °C, carrier gas: N2 or CO2, feedstock: sewage sludge or sewage sludge/biomass mixture) after adding to the soil in long-term pot experiment (180 days). Biochars were added to the podzolic loamy sand at a 2% (w/w) dose. Samples were collected at the beginning of the experiment and after 30, 90 and 180 days. The bacteria Aliivibrio fischeri (luminescence inhibition - Microtox), the plant Lepidium sativum (root growth and germination inhibition test - Phytotoxkit F), and the invertebrate Folsomia candida (mortality and reproduction inhibition test - Collembolan test) were used as the test organisms. In the long-term perspective for most tests, changing the carrier gas from N2 to CO2 resulted in reduced toxicity of the biochar. A particularly beneficial effect of changing the gas to CO2 was observed for the solid-phase test with L. sativum. The CO2 during pyrolysis had the least beneficial effect on toxicity towards A. fischeri.
Assuntos
Pirólise , Salix , Esgotos , Solo , Dióxido de CarbonoRESUMO
The properties of biochar (BC) from crustacean chitin are relatively well understood, while there are few studies on BC from insect chitin. This study presents the characterization and phytotoxic assessment of BC produced from crickets and cricket chitin. Cricket powder (BCCR) and cricket chitin (BCCH) were pyrolyzed at 500 °C and 700 °C. Physicochemical characteristics, N ad-/desorption, FTIR, were examined. SEM images were also performed. Regardless of the pyrolysis temperature, biochars were characterized by a densely "packed" solid surface/monolithic type with a non-porous structure (0.05-0.22 m2/g) and high content of N (9.4-11.8%). BCCHs showed a higher pH (12.2-12.4) compared to BCCR (8.7-10.8). Based on the XRD analysis, BCs were characterized by an amorphous carbon turbostratic structure and a randomly oriented graphitic-like micro-crystallite structure. FTIR spectra of BCs confirmed the presence of various O2 and N-functional groups on the BC surface. BCCHs added to soil at rates from 0.5 to 1.5% significantly reduced the germination of Lepidium sativum. Stimulation of root elongation was also observed in the case of BCCR500 1.0% and BCCR700 1.5%. Thermal degradation of cricket powder and cricket chitin promotes the formation of organic N-containing heterocyclic rings, which lead to the production of N-doped carbons with potential uses in energy storage and the contaminations sorption.
Assuntos
Gryllidae , Animais , Quitina , Pós , Carvão Vegetal/químicaRESUMO
We report freely dissolved concentrations ( Cfree) of PAHs in soils amended with 2.5% biochar and activated carbon (AC) during a long-term (18-months) field experiment. The study evaluates also the impact of different plants (clover, grass, willow) on Cfree PAHs. The cumulative effect of treatments on nitrogen and available forms of phosphorus, potassium, and magnesium is also assessed. The direct addition of biochar to soil did not cause any immediate reduction of the sum of 16 Cfree PAHs, while AC resulted in a slight reduction of 5- and 6 ring compounds. The efficiency of binding of Cfree PAHs by biochar and AC increased with time. For biochar, the maximum reduction of 4-6-ring PAHs (18-67%) was achieved within 6 months. For 2- and 3-ring PAHs, a gradual decrease of Cfree was observed which reached 60-66% at 18 months. AC proved to be better in reducing Cfree PAHs than biochar, though for 2- and 3-ring PAHs, the differences in AC and biochar performances were smaller than those for 4-6-ring PAHs. After 18 months, a significantly lower content of Cfree PAHs was observed in the soil with plants compared to the unplanted soil. Except for potassium, AC or biochar did not negatively impact nutrient availability.
Assuntos
Hidrocarbonetos Policíclicos Aromáticos , Poluentes do Solo , Carbono , Carvão Vegetal , Poluição Ambiental , SoloRESUMO
The goal of the study was to evaluate the application of biochar (BC) to the sewage sludge (SL) on the adsorption and desorption capacity of Cd(II), Cu(II), Ni(II) and Zn(II). The effect of biochar contribution in the sewage sludge (2.5, 5 and 10%) was investigated. The isotherms data were fitted to the Langmiur (LM), Freundlich (FM) and Temkin (TM) models. The best fitting for kinetic study was obtained for the pseudo-second-order equation. The best fitting of the experimental data was observed for the LM in the case of SL and BC, and for the FM in the case of SL- and SL/BC-amended soil. SL was characterized by even four-order higher sorption capacity than BC. The addition of the BC to the SL and next to the soil increased the adsorption capacity of the soil and the SL-amended soil. In the case of all investigated potentially toxic elements (PTEs), the highest adsorption capacity was achieved for SL-amended soil in comparison with the control soil. In the case of other experimental variants, the adsorption capacity of metal ions was as follows: 2.5% BC > 5.0% BC > 10% BC. The negative correlation between hydrated radius of metal ions and the kinetics of sorption was observed. However, the desorption of PTEs from BC/SL-amended soil was significantly lower than for SL-amended soil (except of Cd) and non-amended soil. It can be concluded that the addition of the biochar enhanced the immobilization of PTEs and reduced their bioavailability and mobility in the soil amended by the sewage sludge.
Assuntos
Carvão Vegetal/química , Metais Pesados/química , Poluentes do Solo/química , Adsorção , Disponibilidade Biológica , Metais Pesados/farmacocinética , Polônia , Esgotos/química , Solo/química , Poluentes do Solo/farmacocinéticaRESUMO
The objective of the study was to determine the effect of various methods of biochar activation on the ecotoxicity of soils with various properties and with various content and origin of contaminants. The biochar produced from willow (at 700°C) was activated by 1) microwaves (in a microwave reactor under an atmosphere of water vapour), 2) carbon dioxide (in the quartz fluidized bed reactor) and 3) superheated steam (in the quartz fluidized bed reactor). Three different soils were collected from industrial areas. The soils were mixed with biochar and activated biochars at the dose of 5% and ecotoxicological parameters of mixture was evaluated using two solid phase test - Phytotoxkit F (Lepidium sativum) and Collembolan test (Folsomia candida) and one liquid phase test - Microtox® (Vibrio fischeri). Biochar activation had both positive and negative impacts, depending on the activation method, kind of bioassay and kind of soil. Generally, biochar activated by microwaves increased the effectiveness of ecotoxicity reduction relative to non-activated biochars. Whereas, biochar activated with CO2 most often cause a negative effect manifested by deterioration or as a lack of improvement in relation to non-activated biochar or to non-amended soil. It was also demonstrated that the increase of biochar specific surface area caused a significant reduction of toxicity of water leachates from the studied soils. Effectiveness of the reduction of leachate toxicity was weakened in the presence of dissolved organic carbon in the soil.
Assuntos
Aliivibrio fischeri/efeitos dos fármacos , Artrópodes/efeitos dos fármacos , Carvão Vegetal/química , Ecotoxicologia/métodos , Lepidium sativum/efeitos dos fármacos , Poluentes do Solo/toxicidade , Animais , Dióxido de Carbono/química , Temperatura Alta , Micro-Ondas , Polônia , Salix/química , VaporRESUMO
The objective of the study was to investigate the ability of biochars prepared under different temperatures (400 °C and 600 °C) from the residue of biogas production (RBP) for the adsorption of cadmium (Cd(II)) and nickel (Ni(II)) ions from aqueous solution. Furthermore, the RBP biochars adsorption capacity was compared with adsorption capacity of biochar produced from wheat straw at 600 °C (BCS600). The kinetics of the adsorption, the sorption isotherms, the influence of solution pH and the interfering ions (chlorides and nitrates) were investigated. The desorption of Cd(II) and Ni(II) by hydrochloric and nitric acid from biochars was also investigated. The different types of feedstock used for biochar (BC) preparation (RBP and biomass) determined the physico-chemical properties of biochars and hence their adsorption abilities. Generally, biochars produced from RBPs (regardless of temperature) had the greater capacity to adsorb Cd(II) and Ni(II) than the biochar produced from wheat straw. Of the tested models (Freundlich and Langmuir), the Langmuir model was demonstrated to be the best to describe the sorption of Cd(II) and Ni(II). For the kinetic study, the adsorption process proceeded the fastest for BCU400 than BCU600. Furthermore, BCU600 was the most resistant to the influence of interfering ions on adsorption. For the desorption study, BCU400 was characterized by the highest reproducibility of the surface. The comparison of the results obtained in each adsorption step between RBP biochars and BCS600 suggested that the residue from biogas production could be successfully applied for the removal of Cd(II) and Ni(II) ions from aqueous solutions.
Assuntos
Cádmio , Carvão Vegetal , Níquel , Águas Residuárias , Adsorção , Biocombustíveis , Reprodutibilidade dos Testes , Purificação da ÁguaRESUMO
The objective of the study was the estimation of the effect of surfactants on the toxicity of ZnO, TiO2 and Ni nanoparticles (ENPs) towards Daphnia magna. The effect of hexadecyltrimethylammonium bromide (CTAB), triton X-100 (TX100) and 4-dodecylbenzenesulfonic acid (SDBS) was tested. The Daphtoxkit F test (conforming to OECD Guideline 202 and ISO 6341) was applied for the toxicity testing. Both the surfactants and the ENPs were toxic to D. magna. The addition of ENPs to a solution of the surfactants caused a significant reduction of toxicity of ENPs. The range of reduction of the toxicity of the ENPs depended on the kind of the ENPs and their concentration in the solution, and also on the kind of surfactant. For nano-ZnO the greatest reduction of toxicity was caused by CTAB, while for nano-TiO2 the largest drop of toxicity was observed after the addition of TX100. In the case of nano-Ni, the effect of the surfactants depended on its concentration. Most probably the reduction of toxicity of ENPs in the presence of the surfactants was related with the formation of ENPs aggregates that inhibited the availability of ENPs for D. magna.
Assuntos
Daphnia/efeitos dos fármacos , Nanopartículas Metálicas/toxicidade , Tensoativos/química , Poluentes Químicos da Água/toxicidade , Animais , Benzenossulfonatos/química , Cetrimônio , Compostos de Cetrimônio/química , Níquel/toxicidade , Octoxinol/química , Titânio/toxicidade , Testes de Toxicidade , Óxido de Zinco/toxicidadeRESUMO
The aim of the research was the determination of the toxicity of photocatalytically treated water contaminated by different pharmaceuticals: chloramphenicol (CPL), diclofenac (DCF) or metoprolol (MT). Daphtoxkit F™ with Dapnia magna and Microtox(®) with Vibrio fischeri were used to evaluate the toxicity of the water before and after treatment. D. magna showed higher sensitivity to the presence of pharmaceuticals than V. fischeri. Generally, both tested organisms revealed the greatest sensitivity to the presence of CPL. The application of photocatalytic oxidation has resulted in decreased toxicity. It may confirm the reduction of high toxic parent compounds to less toxic metabolites. The toxicity was reduced in the range from 30% to 100% depending on pharmaceutical tested. The highest reduction of toxicity to V. fischeri and D. magna was observed to MT and CPL respectively. Depending on bioassay the toxicity decrease as follows: CPL>DCF>MT for D. magna and CPL>MT>DCF for V. fischeri.
Assuntos
Aliivibrio fischeri/efeitos dos fármacos , Daphnia/efeitos dos fármacos , Ecotoxicologia , Compostos Orgânicos/metabolismo , Compostos Orgânicos/toxicidade , Poluentes Químicos da Água/metabolismo , Poluentes Químicos da Água/toxicidade , Animais , Concentração Inibidora 50 , Oxirredução , Preparações Farmacêuticas/metabolismo , Purificação da ÁguaRESUMO
Sewage sludge, a complex mixture of contaminants and pathogenic agents, necessitates treatment or stabilization like anaerobic digestion (AD) before safe disposal. AD-derived products (solid digestate and liquid fraction) can be used as fertilizers. During AD, biogas is also produced, and used for energy purposes. All these fractions can be contaminated with various compounds, whose amount depends on the feedstocks used in AD (and their mutual proportions). This paper reviews studies on the distribution of organic contaminants across AD fractions (solid digestate, liquid fraction, and biogas), delving into the mechanisms behind contaminant dissipation and proposing future research directions. AD proves to be a relatively effective method for removing polychlorinated biphenyls, polycyclic aromatic hydrocarbons, pharmaceuticals, antibiotic resistance genes and hydrocarbons. Contaminants are predominantly removed through biodegradation, but many compounds, especially hydrophobic (e.g. per- and polyfluoroalkyl substances), are also sorbed onto digestate particles. The process of sorption is suggested to reduce the bioavailability of contaminants. As a result of sorption, contaminants accumulate in the largest amount in the solid digestate, whereas in smaller amounts in the other AD products. Polar pharmaceuticals (e.g. metformin) are particularly leached, while volatile methylsiloxanes and polycyclic aromatic hydrocarbons, characterized by a high Henry's law constant, are volatilized into the biogas. The removal of compounds can be affected by AD operational parameters, the type of sludge, physicochemical properties of contaminants, and the sludge pretreatment used.
Assuntos
Esgotos , Eliminação de Resíduos Líquidos , Esgotos/química , Anaerobiose , Eliminação de Resíduos Líquidos/métodos , Hidrocarbonetos Policíclicos Aromáticos/análise , Hidrocarbonetos Policíclicos Aromáticos/metabolismo , Biodegradação Ambiental , Poluentes Químicos da Água/análise , Poluentes Químicos da Água/metabolismo , Bifenilos Policlorados/análise , Bifenilos Policlorados/metabolismoRESUMO
During biochar preparation or application some toxic substances may be formed. The established limitations of the content of polycyclic aromatic hydrocarbons (PAHs) aim to monitor the fate of PAHs in the life cycle of biochar. The latest studies have revealed that besides PAHs, some of their derivatives with confirmed toxicity are formed. There has been no policy regards PAH derivatives in biochar yet. The aim of the presented studies was the estimation the changes in the content of PAHs and their derivatives during the agricultural application of biochar. A pot experiment with grass revealed that in a short time, both the content of PAHs and their derivatives was reduced. Similarly, when biochar was added to soil in a long-term experiment, the content of determined derivatives was below the limit of detection, whereas interestingly, the content of pristine PAHs increased with time. Co-addition of biochar and sewage sludge increased the content of PAHs and their derivatives indicating potential environmental hazard due to their presence. However, the key point is the estimation of the bioavailability of PAHs and their derivatives as only the bioavailable fraction is revealing the environmental hazard.
Assuntos
Hidrocarbonetos Policíclicos Aromáticos , Poluentes do Solo , Solo , Poluentes do Solo/análise , Hidrocarbonetos Policíclicos Aromáticos/análise , Carvão Vegetal , EsgotosRESUMO
The stability of Zn-biochar composites is determined by environmental factors, including the aging processes. This paper focused on the ecotoxicological evaluation of Zn-biochar (Zn-BC) composites subjected to chemical aging. Pristine biochars and composites produced at 500 or 700 °C were incubated at 60 and 90 °C for six months. All biochars were characterized in terms of their physicochemical (elemental composition, Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and porous structure), ecotoxicological properties (tested with Folsomia candida and Aliivibrio fischeri) and contaminant content (polycyclic aromatic hydrocarbons (PAH), heavy metals (HM) and environmentally persistent free radicals (EPFR)). An increase in the number of surface oxygen functional groups and increased hydrophilicity and polarity of all Zn-BC composites were observed due to oxidation during aging. It was also found that Zn-BC aging at 90 °C resulted in a 28-30% decrease in solvent-extractable PAHs (Æ©16 Ctot PAHs) compared to nonaged composites. The aging process at both temperatures also caused a 104 fold reduction in EPFRs in Zn-BC composites produced at 500 °C. The changes in the physicochemical properties of Zn-BC composites after chemical aging at 90 °C (such as pH and HM content) caused an increase in the toxicity of the composites to Folsomia candida (reproduction inhibition from 19 to 24%) and Aliivibrio fischeri (luminescence inhibition from 96 to 99%). The aging of composites for a long time may increase the adverse environmental impact of BC-Zn composites due to changes in physicochemical properties (itself and its interactions with pollutants) and the release of Zn from the composite.
Assuntos
Artrópodes , Metais Pesados , Hidrocarbonetos Policíclicos Aromáticos , Animais , Zinco/toxicidade , Carvão Vegetal/química , Metais Pesados/farmacologia , Hidrocarbonetos Policíclicos Aromáticos/toxicidadeRESUMO
Using magnesium-biochar composites (Mg-BC) in adsorption allows for the efficient and economically relevant removal of phosphate (PO43-) from water and wastewater. Applying Mg-BC for pollutant removal requires evaluating the adsorption capacity of composites and their ecotoxicological properties. Investigating the composite aging during the application of these composites into the soil is also essential. In the present study, nonaged and aged (at 60 or 90 °C) Mg-BC composites were investigated in the context of pyrolysis temperature (500 or 700 °C). All analyzed biochars were examined by Fourier transform infrared spectroscopy, X-ray powder diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy and surface area. The content of polycyclic aromatic hydrocarbons (PAHs) (bioavailable Cfree and organic solvent-extractable Ctot), heavy metals (HMs), and environmentally persistent free radicals (EPFRs) were determined. Ecotoxicity was evaluated using tests with Folsomia candida and Allivibrio fischeri. The dependence of adsorption on pyrolysis temperature and composite aging time was observed. Changes in physicochemical properties occurring as a result of aging reduced the adsorption of PO43- on Mg-BC composites. It was found that nonaged Mg-BC700 was more effective (9.55 mg g -1) in the adsorption of PO43- than Mg-BC500 (5.75 mg g-1). The adsorption capacities of aged composites were from 21 to 61% lower than those of the nonaged composites. Due to aging, the content of Cfree PAHs increased by 3-5 times depending on the pyrolysis temperature. However, aging reduced the Ctot PAHs in all composites from 24 to 35% depending on the pyrolysis temperature. Ecotoxicological evaluation of Mg-BC composites showed increased toxicity after aging to both organisms. The use of aged BC potentially increases the contaminant content and toxicity of Mg-BC composites.
Assuntos
Magnésio , Hidrocarbonetos Policíclicos Aromáticos , Adsorção , Fosfatos , Carvão Vegetal/química , Hidrocarbonetos Policíclicos Aromáticos/químicaRESUMO
Metals may be associated with plastics as additives arising from manufacture or through acquisition from the environment, but these associations are often poorly defined or referred to synonymously when considering metal availability. In this study, samples of plastic litter (n = 22) have been collected from various environmental and industrial compartments of Lublin Province, Poland, and fractionated according to polymer type (polyethylene, polyethylene terephthalate, nylon, expanded polystyrene, polypropylene, and "mixed") before being micronised to < 2 mm. Composites (n = 89) were subjected to two phases of a standardised and widely employed sequential extraction protocol (Bureau Communautaire de Reference; BCR) in order to define available (acid-soluble and exchangeable) and residual (soluble in boiling aqua regia) concentrations of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn. For a given metal, total content, calculated by summing available and residual components, was highly variable, both between locations and amongst polymer categories, reflecting the heterogeneous distribution of a multitude of different additives. Overall, however, concentrations were greatest for Fe, with medians of several hundred to several thousand mg kg-1 amongst the different polymers, and lowest for Cd, Co, and Ni, where nearly all concentrations were below 10 mg kg-1. Median percentage metal availabilities were greatest for expanded polystyrene and were above 25% for Mn and Zn and below 10% for Cr and Fe in all polymer types. These observations are largely, but not entirely, attributed to the relative contributions of metals acquired from the environment and metals present as additives and residues. Significantly, the approach employed allows direct comparisons of metal availability in plastics with metal availability in environmental solids in order to evaluate the overall impacts of plastics in metal risk assessments.