RESUMO
BACKGROUND: Upper limb impairments in a hemiparetic arm are clinically quantified by well-established clinical scales, known to suffer poor validity, reliability, and sensitivity. Alternatively, robotics can assess motor impairments by characterizing joint dynamics through system identification. In this study, we establish the merits of quantifying abnormal synergy, spasticity, and changes in joint viscoelasticity using system identification, evaluating (1) feasibility and quality of parametric estimates, (2) test-retest reliability, (3) differences between healthy controls and patients with upper limb impairments, and (4) construct validity. METHODS: Forty-five healthy controls, twenty-nine stroke patients, and twenty cerebral palsy patients participated. Participants were seated with the affected arm immobilized in the Shoulder-Elbow-Perturbator (SEP). The SEP is a one-degree-of-freedom perturbator that enables applying torque perturbations to the elbow while providing varying amounts of weight support to the human arm. Participants performed either a 'do not intervene' or a resist task. Elbow joint admittance was quantified and used to extract elbow viscosity and stiffness. Fifty-four of the participants performed two sessions to establish the test-retest reliability of the parameters. Construct validity was assessed by correlating system identification parameters to parameters extracted using a SEP protocol that objectifies current clinical scales (Re-Arm protocol). RESULTS: Feasibility was confirmed by all participants successfully completing the study protocol within ~ 25 min without reporting pain or burden. The parametric estimates were good with a variance-accounted-for of ~ 80%. A fair to excellent test-retest reliability was found ([Formula: see text]) for patients, except for elbow stiffness with full weight support ([Formula: see text]). Compared to healthy controls, patients had a higher elbow viscosity and stiffness during the 'do not intervene' task and lower viscosity and stiffness during the resist task. Construct validity was confirmed by a significant (all [Formula: see text]) but weak to moderate ([Formula: see text]) correlation with parameters from the Re-Arm protocol. CONCLUSIONS: This work demonstrates that system identification is feasible and reliable for quantifying upper limb motor impairments. Validity was confirmed by differences between patients and controls and correlations with other measurements, but further work is required to optimize the experimental protocol and establish clinical value.
Assuntos
Transtornos Motores , Acidente Vascular Cerebral , Humanos , Reprodutibilidade dos Testes , Extremidade Superior , CotoveloRESUMO
BACKGROUND: For patients with post-stroke upper limb impairments, the currently available clinical measurement instruments are inadequate for reliable quantification of multiple impairments, such as muscle weakness, abnormal synergy, changes in elastic joint properties and spasticity. Robotic devices to date have successfully achieved precise and accurate quantification but are often limited to the measurement of one or two impairments. Our primary aim is to develop a robotic device that can effectively quantify four main motor impairments of the elbow. METHODS: The robotic device, Shoulder Elbow Perturbator, is a one-degree-of-freedom device that can simultaneously manipulate the elbow joint and support the (partial) weight of the human arm. Upper limb impairments of the elbow were quantified based on four experiments on the paretic arm in ten stroke patients (mean age 65 ± 10 yrs, 9 males, post-stroke) and the non-dominant arm in 20 healthy controls (mean age 65 ± 14 yrs, 6 males). The maximum strength of elbow flexor and elbow extensor muscles was measured isometrically at 90-degree elbow flexion. The maximal active extension angle of the elbow was measured under different arm weight support levels to assess abnormal synergy. Torque resistance was analyzed during a slow (6°/s) passive elbow rotation, where the elbow moved from the maximal flexion to maximal extension angle and back, to assess elastic joint properties. The torque profile was evaluated during fast (100°/s) passive extension rotation of the elbow to estimate spasticity. RESULTS: The ten chronic stroke patients successfully completed the measurement protocol. The results showed impairment values outside the 10th and 90th percentile reference intervals of healthy controls. Individual patient profiles were determined and illustrated in a radar figure, to support clinicians in developing targeted treatment plans. CONCLUSION: The Shoulder Elbow Perturbator can effectively quantify the four most important impairments of the elbow in stroke patients and distinguish impairment scores of patients from healthy controls. These results are promising for objective and complete quantification of motor impairments of the elbow and monitoring patient prognosis. Our newly developed Shoulder Elbow Perturbator can therefore in the future be employed to evaluate treatment effects by comparing pre- and post-treatment assessments.
Assuntos
Articulação do Cotovelo , Transtornos Motores , Acidente Vascular Cerebral , Idoso , Cotovelo , Articulação do Cotovelo/fisiologia , Eletromiografia/métodos , Humanos , Masculino , Pessoa de Meia-Idade , Espasticidade Muscular , Paresia/diagnóstico , Paresia/etiologia , Acidente Vascular Cerebral/complicaçõesRESUMO
BACKGROUND: Soft-robotic gloves with an assist-as-needed control have the ability to assist daily activities where needed, while stimulating active and highly functional movements within the user's possibilities. Employment of hand activities with glove support might act as training for unsupported hand function. OBJECTIVE: To evaluate the therapeutic effect of a grip-supporting soft-robotic glove as an assistive device at home during daily activities. METHODS: This multicentre intervention trial consisted of 3 pre-assessments (averaged if steady state = PRE), one post-assessment (POST), and one follow-up assessment (FU). Participants with chronic hand function limitations were included. Participants used the Carbonhand glove during six weeks in their home environment on their most affected hand. They were free to choose which activities to use the glove with and for how long. The primary outcome measure was grip strength, secondary outcome measures were pinch strength, hand function and glove use time. RESULTS: 63 patients with limitations in hand function resulting from various disorders were included. Significant improvements (difference PRE-POST) were found for grip strength (+1.9 kg, CI 0.8 to 3.1; p = 0.002) and hand function, as measured by Jebson-Taylor Hand Function Test (-7.7 s, CI -13.4 to -1.9; p = 0.002) and Action Research Arm Test (+1.0 point, IQR 2.0; p≤0.001). Improvements persisted at FU. Pinch strength improved slightly in all fingers over six-week glove use, however these differences didn't achieve significance. Participants used the soft-robotic glove for a total average of 33.0 hours (SD 35.3), equivalent to 330 min/week (SD 354) or 47 min/day (SD 51). No serious adverse events occurred. CONCLUSION: The present findings showed that six weeks use of a grip-supporting soft-robotic glove as an assistive device at home resulted in a therapeutic effect on unsupported grip strength and hand function. The glove use time also showed that this wearable, lightweight glove was able to assist participants with the performance of daily tasks for prolonged periods.
Assuntos
Força da Mão , Mãos , Dispositivos Eletrônicos Vestíveis , Humanos , Força da Mão/fisiologia , Feminino , Masculino , Pessoa de Meia-Idade , Mãos/fisiologia , Adulto , Idoso , Tecnologia Assistiva , Robótica/instrumentação , Atividades CotidianasRESUMO
OBJECTIVE: To assess test-retest reliability and validity of a new diagnostic device, the Shoulder Elbow Perturbator, to quantify muscle weakness, abnormal synergy, (muscle activity-related) spasticity, and changes in viscoelastic joint properties of the elbow. SUBJECTS: Stroke patients, adults with cerebral palsy and healthy controls. METHODS: Test-retest reliability was evaluated using intra-class correlations (ICC) and assessment of measurement error. The device's validity was evaluated by demonstrating differences between patients and healthy controls, and correlations of spasticity and abnormal synergy outcomes using the clinical Modified Tardieu Scale, the Fugl-Meyer Assessment, and the Test of Arm Selective Control. RESULTS: Reliability was excellent, with an ICC > 0.75 for synergy and ICCs > 0.90 for all other impairments, with relatively small measurement errors. Validity was confirmed by group differences between patients and healthy controls for muscle weakness, spasticity, and viscoelastic joint properties, but not for abnormal synergy. Correlation analysis with clinical scales confirmed validity for spasticity, while, for synergy, correlations were found in the patients with stroke, but not those with cerebral palsy. CONCLUSION: This new diagnostic device is a reliable and valid instrument to assess multiple upper limb impairments in patients with neurological conditions, supporting its use in clinical practice. Further studies are needed to confirm these findings.
Assuntos
Paralisia Cerebral , Acidente Vascular Cerebral , Adulto , Braço , Paralisia Cerebral/diagnóstico , Humanos , Espasticidade Muscular/diagnóstico , Debilidade Muscular/diagnóstico , Paresia/diagnóstico , Reprodutibilidade dos Testes , Acidente Vascular Cerebral/complicações , Acidente Vascular Cerebral/diagnósticoRESUMO
In an ongoing study, an assistive wearable soft-robotic glove is tested at home for 6 weeks by subjects with decreased handgrip strength, due to different hand injuries or diseases, to assess whether use of this assistive grip-supporting glove will result in improved hand strength/ function. An interim analysis of the available dataset of 46 participants showed that (unsupported) grip strength and hand function improved after using the soft-robotic glove as assistive aid during activities of daily living (ADLs) during 6 weeks at home. After glove use is ended, this is maintained for at least 4 weeks. Considering that in the current situation the analysis is underpowered, these interim results are promising for finding a clinical (therapeutic) effect of using a soft-robotic glove as assistance during ADLs. If this is the case, this might open up entirely new opportunities for extending rehabilitation into people's homes, while also providing them with assistance to directly support performance of daily activities. Such a combination is becoming available with the development of mature and user-friendly wearable soft-robotic devices. This would enable very high doses of training throughout the day, in the most functional, task-specific way possible, and possibly prevention of learned non-use.
Assuntos
Procedimentos Cirúrgicos Robóticos , Dispositivos Eletrônicos Vestíveis , Atividades Cotidianas , Mãos , Força da Mão , HumanosRESUMO
BACKGROUND: Decline of hand function, especially reduced hand strength, is a common problem that can be caused by many disorders and results in difficulties performing activities of daily living. A wearable soft robotic glove may be a solution, enabling use of the affected arm and hand repeatedly during functional daily activities and providing intensive and task-specific training simultaneously with assistance of hand function. OBJECTIVE: We aim to investigate the therapeutic effect of an assistive soft robotic glove (Carbonhand). METHODS: This multicenter uncontrolled intervention study consists of 3 preassessments (T0, T1, and T2), a postassessment (T3), and a follow-up assessment (T4). Participants are patients who experience hand function limitations. For the intervention, participants will use the glove during activities of daily living at home for 6 weeks, with a recommended use of at least 180 minutes per week. The primary outcome measure is handgrip strength, and secondary outcome measures are related to functional arm and hand abilities, amount of glove use, and quality of life. RESULTS: The first participant was included on June 25, 2019. Currently, the study has been extended due to the COVID-19 pandemic; data collection and analysis are expected to be completed in 2022. CONCLUSIONS: The Carbonhand system is a wearable assistive device, allowing performance of functional activities to be enhanced directly during functional daily activities. At the same time, active movement of the user is encouraged as much as possible, which has potential to provide highly intensive and task-specific training. As such, it is one of the first assistive devices to incorporate assist-as-needed principles. This is the first powered clinical trial that investigates the unique application of an assistive grip-supporting soft robotic glove outside of clinical settings with the aim to have a therapeutic effect. TRIAL REGISTRATION: Netherlands Trial Register NTR NL7561; https://www.trialregister.nl/trial/7561. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/34200.
RESUMO
When reproducing a previously perceived force or position humans make systematic errors. This study determined the effect of force level on force and position reproduction, when both target and reproduction force are self-generated with the same hand. Subjects performed force reproduction tasks at different force levels, against a fixed handle, and performed a position reproduction task against a haptic manipulator which applied constant opposing forces. Subjects performed a series of two interchanging trials: matching an onscreen force or position (reference trial), and subsequently reproducing the same force or position without visual feedback (reproduction trial). Subjects generated too high forces for low force levels (<;40 N) and too low forces for high force levels (>130 N). No effect of force level on the position reproduction error was found. Previous studies proposed that reafference feedback, i.e., the sensory prediction from self-generated forces, causes the force reproduction error. However, if the force reproduction error is exclusively caused by the reafference feedback, the force reproduction error should disappear when both target and reproduction force are self-generated. The results of this study show an effect of force level on the force reproduction error, indicating that reafference feedback is not the sole factor in force reproduction tasks.
RESUMO
In an admittance-controlled haptic device, input forces are used to calculate the movement of the device. Although developers try to minimize delays, there will always be delays between the applied force and the corresponding movement in such systems, which might affect what the user of the device perceives. In this experiment we tested whether these delays in a haptic human-robot interaction influence the perception of mass. In the experiment an admittance-controlled manipulator was used to simulate various masses. In a staircase design subjects had to decide which of two virtual masses was heavier after gently pushing them leftward with the right hand in mid-air (no friction, no gravity). The manipulator responded as quickly as possible or with an additional delay (25 or 50 ms) to the forces exerted by the subject on the handle of the haptic device. The perceived mass was ~10% larger for a delay of 25 ms and ~20% larger for a delay of 50 ms. Based on these results, we estimated that the delays that are present in nowadays admittance-controlled haptic devices (up to 20ms) will give an increase in perceived mass which is smaller than the Weber fraction for mass (~10% for inertial mass). Additional analyses showed that the subjects' decision on mass when the perceptual differences were small did not correlate with intuitive variables such as force, velocity or a combination of these, nor with any other measured variable, suggesting that subjects did not have a consistent strategy during guessing or used other sources of information, for example the efference copy of their pushes.