Unraveling the Heterointegration of 3D Semiconductors on Graphene by Anchor Point Nucleation.

The heterointegration of graphene with semiconductor materials and the development of graphene-based hybrid functional devices are heavily bound to the control of surface energy. Although remote epitaxy offers one of the most appealing techniques for implementing 3D/2D heterostructures, it is only suitable for polar materials and is hugely dependent on the graphene interface quality. Here, the growth of defect-free single-crystalline germanium (Ge) layers on a graphene-coated Ge substrate is demonstrated by introducing a new approach named anchor point nucleation (APN). This powerful approach based on graphene surface engineering enables the growth of semiconductors on any type of substrate covered by graphene. Through plasma treatment, defects such as dangling bonds and nanoholes, which act as preferential nucleation sites, are introduced in the graphene layer. These experimental data unravel the nature of those defects, their role in nucleation, and the mechanisms governing this technique. Additionally, high-resolution transmission microscopy combined with geometrical phase analysis established that the as-grown layers are perfectly single-crystalline, stress-free, and oriented by the substrate underneath the engineered graphene layer. These findings provide new insights into graphene engineering by plasma and open up a universal pathway for the heterointegration of high-quality 3D semiconductors on graphene for disruptive hybrid devices.

New Architecture Based on Metal-Organic Frameworks and Spin Crossover Complexes to Detect Volatile Organic Compounds.

We present here the encapsulation of a spin crossover complex C1 [FeII(L)] (L: 4-amino-, 2-(2-pyridinylmethylene)hydrazide) inside MOF-808(Zr), a chemically robust Metal-Organic Framework. The compound C1⊂MOF-808 retains its crystallinity as well as a partial porosity compared to pristine MOF and shows solvatochromism under Volatile Organic compounds (VOCs) sorption associated to a spin state change of the guest complex. More specifically, this compound shows an interesting reversible color change under formaldehyde and formic acid vapor sorption and can therefore be considered as a new kind of optical VOCs chemosensor, opening new doors for developing a broad range of VOCs optical sensors.

Highly Photostable Zn-Treated Halide Perovskite Nanocrystals for Efficient Single Photon Generation.

Achieving pure single-photon emission is essential for a range of quantum technologies, from quantum computing to quantum key distribution to quantum metrology. Among solid-state quantum emitters, colloidal lead halide perovskite (LHP) nanocrystals (NCs) have attracted considerable interest due to their structural and optical properties, which make them attractive candidates for single-photon sources (SPSs). However, their practical utilization has been hampered by environment-induced instabilities. In this study, we fabricate and characterize in a systematic manner Zn-treated CsPbBr3 colloidal NCs obtained through Zn2+ ion doping at the Pb-site, demonstrating improved stability under dilution and illumination. The doped NCs exhibit high single-photon purity, reduced blinking on a submillisecond time scale, and stability of the bright state even at excitation powers well above saturation. Our findings highlight the potential of this synthesis approach to optimize the performance of LHP-based SPSs, opening up interesting prospects for their integration into nanophotonic systems for quantum technology applications.

Nanoscale Iron-Based Metal-Organic Frameworks: Incorporation of Functionalized Drugs and Degradation in Biological Media.

Metal-organic frameworks (MOFs) attract growing interest in biomedical applications. Among thousands of MOF structures, the mesoporous iron(III) carboxylate MIL-100(Fe) (MIL stands for the Materials of Lavoisier Institute) is among the most studied MOF nanocarrier, owing to its high porosity, biodegradability, and lack of toxicity. Nanosized MIL-100(Fe) particles (nanoMOFs) readily coordinate with drugs leading to unprecedented payloads and controlled release. Here, we show how the functional groups of the challenging anticancer drug prednisolone influence their interactions with the nanoMOFs and their release in various media. Molecular modeling enabled predicting the strength of interactions between prednisolone-bearing or not phosphate or sulfate moieties (PP and PS, respectively) and the oxo-trimer of MIL-100(Fe) as well as understanding the pore filling of MIL-100(Fe). Noticeably, PP showed the strongest interactions (drug loading up to 30 wt %, encapsulation efficiency > 98%) and slowed down the nanoMOFs' degradation in simulated body fluid. This drug was shown to bind to the iron Lewis acid sites and was not displaced by other ions in the suspension media. On the contrary, PS was entrapped with lower efficiencies and was easily displaced by phosphates in the release media. Noticeably, the nanoMOFs maintained their size and faceted structures after drug loading and even after degradation in blood or serum after losing almost the totality of the constitutive trimesate ligands. Scanning electron microscopy with high annular dark field (STEM-HAADF) in conjunction with X-Ray energy-dispersive spectrometry (XEDS) was a powerful tool enabling the unraveling of the main elements to gain insights on the MOF structural evolution after drug loading and/or upon degradation.

In-Situ Transmission Electron Microscopy Observation of Germanium Growth on Freestanding Graphene: Unfolding Mechanism of 3D Crystal Growth During Van der Waals Epitaxy.

Breakthroughs in cutting-edge research fields such as hetero-integration of materials and the development of quantum devices are heavily bound to the control of misfit strain during heteroepitaxy. While remote epitaxy offers one of the most intriguing avenues, demonstrations of functional hybrid heterostructures are hardly possible without a deep understanding of the nucleation and growth kinetics of 3D crystals on graphene and their mutual interactions. Here, the kinetics of such processes from real-time observations of germanium (Ge) growth on freestanding single layer graphene (SLG) using in-situ transmission electron microscopy are unraveled. This powerful technique provides a unique opportunity to observe new and yet unexplored phenomena, which are not accessible to the standard ex situ characterizations. Through direct observations, remote interactions are elucidated between Ge crystals through the graphene layer in double heterostructures of Ge/graphene/Ge. Notably, the data show real-time evidence of vertical Ge atoms diffusion through the graphene layer. This phenomenon is attributed to the remote interactions of Ge atoms through the graphene lattice, due to its interatomic interaction transparency. Additionally, key mechanisms governing nucleation and initial growth in graphene were systematically determined. These findings enlighten the growth mechanism of graphene and provide a new pathway for disruptive hybrid semiconductor-graphene devices.

Growing self-assisted GaAs nanowires up to 80µm long by molecular beam epitaxy.

Ultralong GaAs nanowires were grown by molecular beam epitaxy using the vapor-liquid-solid method. In this ultralong regime we show the existence of two features concerning the growth kinetic and the structural properties. Firstly, we observed a non-classical growth mode, where the axial growth rate is attenuated. Secondly, we observed structural defects at the surface of Wurtzite segments located at the bottom part of the nanowires. We explain these two phenomena as arising from a particular pathway of the group V species, specific to ultralong nanowires. Finally, the optical properties of such ultralong nanowires are studied by photoluminescence experiments.

Engineering a Robust Flat Band in III-V Semiconductor Heterostructures.

Electron states in semiconductor materials can be modified by quantum confinement. Adding to semiconductor heterostructures the concept of lateral geometry offers the possibility to further tailor the electronic band structure with the creation of unique flat bands. Using block copolymer lithography, we describe the design, fabrication, and characterization of multiorbital bands in a honeycomb In0.53Ga0.47As/InP heterostructure quantum well with a lattice constant of 21 nm. Thanks to an optimized surface quality, scanning tunnelling spectroscopy reveals the existence of a strong resonance localized between the lattice sites, signature of a p-orbital flat band. Together with theoretical computations, the impact of the nanopatterning imperfections on the band structure is examined. We show that the flat band is protected against the lateral and vertical disorder, making this industry-standard system particularly attractive for the study of exotic phases of matter.

Correlating Structure and Detection Properties in HgTe Nanocrystal Films.

HgTe nanocrystals (NCs) enable broadly tunable infrared absorption, now commonly used to design light sensors. This material tends to grow under multipodic shapes and does not present well-defined size distributions. Such point generates traps and reduces the particle packing, leading to a reduced mobility. It is thus highly desirable to comprehensively explore the effect of the shape on their performance. Here, we show, using a combination of electron tomography and tight binding simulations, that the charge dissociation is strong within HgTe NCs, but poorly shape dependent. Then, we design a dual-gate field-effect-transistor made of tripod HgTe NCs and use it to generate a planar p-n junction, offering more tunability than its vertical geometry counterpart. Interestingly, the performance of the tripods is higher than sphere ones, and this can be correlated with a stronger Te excess in the case of sphere shapes which is responsible for a higher hole trap density.

Ultrasmall Copper Nanoclusters in Zirconium Metal-Organic Frameworks for the Photoreduction of CO2.

Encapsulating ultrasmall Cu nanoparticles inside Zr-MOFs to form core-shell architecture is very challenging but of interest for CO2 reduction. We report for the first time the incorporation of ultrasmall Cu NCs into a series of benchmark Zr-MOFs, without Cu NCs aggregation, via a scalable room temperature fabrication approach. The Cu NCs@MOFs core-shell composites show much enhanced reactivity in comparison to the Cu NCs confined in the pore of MOFs, regardless of their very similar intrinsic properties at the atomic level. Moreover, introducing polar groups on the MOF structure can further improve both the catalytic reactivity and selectivity. Mechanistic investigation reveals that the CuI sites located at the interface between Cu NCs and support serve as the active sites and efficiently catalyze CO2 photoreduction. This synergetic effect may pave the way for the design of low-cost and efficient catalysts for CO2 photoreduction into high-value chemical feedstock.

Phase Selection in Self-catalyzed GaAs Nanowires.

Crystal phase switching between the zincblende and wurtzite structures in III-V nanowires is crucial from the fundamental viewpoint as well as for electronic and photonic applications of crystal phase heterostructures. Here, the results of in situ monitoring of self-catalyzed vapor-liquid-solid growth of GaAs nanowires by molecular beam epitaxy inside a transmission electron microscope are presented. It is demonstrated that the occurrence of the zincblende or wurtzite phase in self-catalyzed nanowires is determined by the sole parameter, the droplet contact angle, which can be finely tuned by changing the group III and V fluxes. The zincblende phase forms at small (<100°) and large (>125°) contact angles, whereas pure wurtzite phase is observed for intermediate contact angles. Wurtzite nanowires are restricted by vertical sidewalls, whereas zincblende nanowires taper or develop the truncated edge at their top. These findings are explained within a dedicated model for the surface energetics. These results give a clear route for the crystal phase control in Au-free III-V nanowires. On a more general note, in situ growth monitoring with atomic resolution and at the technological-relevant growth rates is shown to be a powerful tool for the fine-tuning of material properties at the nanoscale.

Pushing Absorption of Perovskite Nanocrystals into the Infrared.

To date, defect-tolerance electronic structure of lead halide perovskite nanocrystals is limited to an optical feature in the visible range. Here, we demonstrate that IR sensitization of formamidinium lead iodine (FAPI) nanocrystal array can be obtained by its doping with PbS nanocrystals. In this hybrid array, absorption comes from the PbS nanocrystals while transport is driven by the perovskite which reduces the dark current compared to pristine PbS. In addition, we fabricate a field-effect transistor using a high capacitance ionic glass made of hybrid FAPI/PbS nanocrystal arrays. We show that the hybrid material has an n-type nature with an electron mobility of 2 × 10-3 cm2 V-1 s-1. However, the dark current reduction is mostly balanced by a loss of absorption. To overcome this limitation, we couple the FAPI/PbS hybrid to a guided mode resonator that can enhance the infrared light absorption.

Why is it difficult to grow spontaneous ZnO nanowires using molecular beam epitaxy?

Surface diffusion is known to be of prime importance in the growth of semiconductor nanowires. In this work, we used ZnMgO layers as markers to analyze the growth mechanisms and kinetics during the deposition of ZnMgO/ZnO multilayered shells by molecular beam epitaxy on previously grown ZnO nanowire cores (so called core-shell heterostructures). Specifically, the influence of the O2 flow sent into the plasma cell on the adatom surface mobility was investigated. By carefully measuring the growth rate on the lateral facets as well as on the top of the nanowires, it is concluded that the surface diffusion length of adatoms, within the used MBE growth conditions, is very low. Such poor surface mobility explains why so few works can be found related to the spontaneous growth (without catalyst) of ZnO nanowires by MBE, contrary to other deposition techniques.

Nanoscale electrical analyses of axial-junction GaAsP nanowires for solar cell applications.

Axial p-n and p-i-n junctions in GaAs0.7P0.3 nanowires are demonstrated and analyzed using electron beam induced current microscopy. Organized self-catalyzed nanowire arrays are grown by molecular beam epitaxy on nanopatterned Si substrates. The nanowires are doped using Be and Si impurities to obtain p- and n-type conductivity, respectively. A method to determine the doping type by analyzing the induced current in the vicinity of a Schottky contact is proposed. It is demonstrated that for the applied growth conditions using Ga as a catalyst, Si doping induces an n-type conductivity contrary to the GaAs self-catalyzed nanowire case, where Si was reported to yield a p-type doping. Active axial nanowire p-n junctions having a homogeneous composition along the axis are synthesized and the carrier concentration and minority carrier diffusion lengths are measured. To the best of our knowledge, this is the first report of axial p-n junctions in self-catalyzed GaAsP nanowires.

Evidence and control of unintentional As-rich shells in GaAs1-x P x nanowires.

We report on the detailed composition of ternary GaAsP nanowires (NWs) grown using self-catalyzed vapor-liquid-solid (VLS) growth by molecular beam epitaxy. We evidence the formation of an unintentional shell, which enlarges by vapor-solid growth concurrently to the main VLS-grown core. The NW core and unintentional shell have typically different chemical compositions if no effort is made to adjust the growth conditions. The compositions can be made equal by changing the substrate temperature and the P/As flux ratio in the vapor phase. In all cases, we still observe the existence of a P-rich interface between the GaAsP NW core and the unintentional shell, even if favorable growth conditions are used.

Importance of point defect reactions for the atomic-scale roughness of III-V nanowire sidewalls.

The surface morphology of III-V semiconductor nanowires (NWs) protected by an arsenic cap and subsequently evaporated in ultrahigh vacuum is investigated with scanning tunneling microscopy and scanning transmission electron microscopy. We show that the changes of the surface morphology as a function of the NW composition and the nature of the seed particles are intimately related to the formation and reaction of surface point defects. Langmuir evaporation close to the congruent evaporation temperature causes the formation of vacancies which nucleate and form vacancy islands on {110} sidewalls of self-catalyzed InAs NWs. However, for annealing temperatures much smaller than the congruent temperature, a new phenomenon occurs: group III vacancies form and are filled by excess As atoms, leading to surface AsGa antisites. The resulting Ga adatoms nucleate with excess As atoms at the NW edges, producing monoatomic-step islands on the {110} sidewalls of GaAs NWs. Finally, when gold atoms diffuse from the seed particle onto the {110} sidewalls during evaporation of the protective As cap, Langmuir evaporation does not take place, leaving the sidewalls of InAsSb NWs atomically flat.

Measuring and Modeling the Growth Dynamics of Self-Catalyzed GaP Nanowire Arrays.

The bottom-up fabrication of regular nanowire (NW) arrays on a masked substrate is technologically relevant, but the growth dynamic is rather complex due to the superposition of severe shadowing effects that vary with array pitch, NW diameter, NW height, and growth duration. By inserting GaAsP marker layers at a regular time interval during the growth of a self-catalyzed GaP NW array, we are able to retrieve precisely the time evolution of the diameter and height of a single NW. We then propose a simple numerical scheme which fully computes shadowing effects at play in infinite arrays of NWs. By confronting the simulated and experimental results, we infer that re-emission of Ga from the mask is necessary to sustain the NW growth while Ga migration on the mask must be negligible. When compared to random cosine or random uniform re-emission from the mask, the simple case of specular reflection on the mask gives the most accurate account of the Ga balance during the growth.

Wave-Function Engineering in HgSe/HgTe Colloidal Heterostructures To Enhance Mid-infrared Photoconductive Properties.

The use of intraband transition is an interesting alternative path for the design of optically active complex colloidal materials in the mid-infrared range. However, so far, the performance obtained for photodetection based on intraband transition remains much smaller than the one relying on interband transition in narrow-band-gap materials operating at the same wavelength. New strategies have to be developed to make intraband materials more effective. Here, we propose growing a heterostructure of HgSe/HgTe as a means of achieving enhanced intraband-based photoconduction. We first tackle the synthetic challenge of growing a heterostructure on soft (Hg-based) material. The electronic spectrum of the grown heterostructure is then investigated using a combination of numerical simulation, infrared spectroscopy, transport measurement, and photoemission. We report a type-II band alignment with reduced doping compared with a core-only object and boosted hole conduction. Finally, we probe the photoconductive properties of the heterostructure while resonantly exciting the intraband transition by using a high-power-density quantum cascade laser. Compared to the previous generation of material based on core-only HgSe, the heterostructures have a lower dark current, stronger temperature dependence, faster photoresponse (with a time response below 50 µs), and detectivity increased by a factor of 30.

Atomic Step Flow on a Nanofacet.

Crystal growth often proceeds by atomic step flow. When the surface area available for growth is limited, the nucleation and progression of the steps can be affected. This issue is particularly relevant to the formation of nanocrystals. We examine the case of Au-catalyzed GaAs nanowires, which we grow in a transmission electron microscope. Our in situ observations show that atomic layers nucleate at the periphery of the interface between the nanowire and the catalyst droplet. From this starting location, the atomic step flows within a restricted area of hexagonal shape. At specific partial coverages, the monolayer configuration changes abruptly. A simple model based on the geometry of the system and its edge energies explains these observations. In particular, we observe an inversion of the step curvature which reveals that the effective energy per unit length of monolayer edge is much lower at the interface periphery than inside the catalyst droplet.

Biomimetic ion channels formation by emulsion based on chemically modified cyclodextrin nanotubes.

Biomimetic ion channels can be made to display the high sensitivity of natural protein nanopores and to develop new properties as a function of the material used. How to design the best future biomimetic channels? The main challenges are to control their sensitivity, as well as their syntheses, chemical modifications, insertion and lifetime in a lipid membrane. To address these challenges, we have recently designed short cyclodextrin nanotubes characterized by mass spectrometry and high-resolution transmission electron microscopy. They form non-permanent ion channels in lipid bilayers. Here we show how to improve the nanotube insertion in order to limit multiple insertions, how to stabilize biomimetic channels into the membrane, and how to understand the ion dynamics in confined medium scale.

Morphology and valence band offset of GaSb quantum dots grown on GaP(001) and their evolution upon capping.

This work presents a detailed study of GaSb quantum dot (QD) epitaxy on (001) GaP substrates by means of molecular beam epitaxy. Despite the large mismatch between GaP and GaSb, we show that in the nucleation-diffusion regime, the QD size distribution follows the predictions of the scaling theory. Scanning transmission electron microscopy analysis of grown QDs reveal that they are plastically relaxed by 60° pairs of misfit dislocations and the valence band offset measured by x-ray photoelectron spectroscopy on such QDs amounts to 0.5 eV. After capping, the QD morphology is strongly modified with a large P/Sb exchange-segregation reaction, which even leads to the formation of core-shell nanostructures. Remarkably the resulting QD layer is coherent to the substrate without any remaining misfit dislocation and exhibits still strong composition modulations.