RESUMO
Functional nanomaterials have attracted attention by producing different structures in any field. These materials have several potential applications, including medicine, electronics, and energy, which provide many unique properties. These nanostructures can be synthesized using various methods, including self-assembly, which can be used for the same applications. This unique nanomaterial is increasingly being used for biological detection due to its unique optical, electrical, and mechanical properties, which provide sensitive and specific sensors for detecting biomolecules such as DNA, RNA, and proteins. This review highlights recent advances in the field and discusses the fabrication and characterization of the corresponding materials, which can be further applied in optical, magnetic, electronic, and sensor fields.
Assuntos
Técnicas Biossensoriais , Nanoestruturas , Técnicas Biossensoriais/métodos , Nanoestruturas/química , Proteínas , DNA , EletrônicaRESUMO
Early prostate cancer (PCa) diagnostic is crucial to enhance patient survival rates; besides, non-invasive platforms have been developed worldwide in order to precisely detect PCa biomarkers. Therefore, the aim of the present study is to develop a new aptamer-based biosensor through the self-assembling of thiolated aptamers for PSA and VEGF on the top of gold electrodes. This biosensor was tested in three prostate cell lines (RWPE-1, LNCaP and PC3). The results evidenced a stable and sensitive sensor presenting wide linear detection ranges (0.08-100 ng/mL for PSA and 0.15 ng-100 ng/mL for VEGF). Therefore, the aptasensor was able to detect the patterns of PSA and VEGF released in vitro by PCa cells, which gave new insights about the prostate cancer protein dynamics. Thus, it could be used as a non-invasive PCa clinical diagnosis instrument in the near future. Graphical Abstract Overview of the experimental design applied to the aptamer-based electrochemical sensor self-assembled on the thiolated hairpin structure. A filter membrane was added on top of working electrode to provide the cell-attachment surface after aptamer incubation, without compromising the aptamer layer. The pore membrane allowed target proteins to pass to the aptamer surface; the MCH backfilling avoided unspecific protein binding to the gold electrode surface.
Assuntos
Aptâmeros de Nucleotídeos/química , Técnicas Biossensoriais/métodos , Técnicas Eletroquímicas , Antígeno Prostático Específico/análise , Neoplasias da Próstata/diagnóstico , Fator A de Crescimento do Endotélio Vascular/análise , Eletrodos , Ouro/química , Humanos , MasculinoRESUMO
Herein we demonstrate a plasmonic nanobiosensor that explores chain reaction amplification mechanisms to transduce chemical signals released in biocatalytic reactions, turning optical signals into a visual spectral range. The sensor has a very simple design: gold nanoparticles resting in the surface of a grafted P2VP film. Changes in the gold nanoparticles' position causes changes in the plasmon coupling mode. This is detected by means of a maximum absorbance shift.
Assuntos
Técnicas Biossensoriais , Nanotecnologia , Biocatálise , Cloretos/química , Compostos Férricos/química , Glucose/análise , Glucose Oxidase/metabolismo , Ouro/química , Nanopartículas Metálicas/química , Metacrilatos/química , Polímeros/química , Ressonância de Plasmônio de SuperfícieRESUMO
Liquid biopsy has progressed to its current use to diagnose and monitor cancer. Despite the recent advances in investigating cancer detection and diagnosis strategies, there is still a room for improvements in capturing CTCs. We developed an efficient CTC detection system by integrating gold nanoparticles with a microfluidic platform, which can achieve CTC capture within 120 min. Here, we report our development of a simple and effective way to isolate CTCs using antibodies attached on gold nanoparticles to the surface of a lateral filter array (LFA) microdevice. Our method was optimized using three pancreatic tumor cell lines, enabling the capture with high efficiency (90% ± 3.2%). The platform was further demonstrated for isolating CTCs from patients with metastatic pancreatic cancer. Our method and platform enables the production of functionalized, patterned surfaces that interact with tumor cells, enhancing the selective capture of CTCs for biological assays.
Assuntos
Nanopartículas Metálicas , Técnicas Analíticas Microfluídicas , Células Neoplásicas Circulantes , Humanos , Microfluídica/métodos , Células Neoplásicas Circulantes/metabolismo , Ouro , Linhagem Celular TumoralRESUMO
BACKGROUND: Prostate cancer cells have very high PCA3 messenger RNA levels, which turns them into one of the new biomarkers for prostate cancer prognosis and diagnosis. OBJECTIVE: Our goal here is to develop a new aptasensor to detect PCA3 release by the cancer cell. METHODS: DNA hairpin containing PCA3 aptamer was thiolated, conjugated to methylene blue (MB) redox probe, and immobilized on gold electrode through self-assembly to detect label-free cancer cells. RESULTS: Our data have evidenced stable and sensitive sensors presenting a wide linear detection range (0-150ng/mL). In addition, monitoring PCA3 released by different types of prostate cells can provide in-depth knowledge about prostate cancer dynamics; therefore, it is a powerful platform for earlier clinical diagnostic. The released PCA3 can vary depending on the type of adopted prostate cells. CONCLUSION: PCA3 release was monitored in a group of cells for 2 h; it showed significantly higher expression in both LNCaP and PC-3 cells. This strategy provides a unique and simple methodology to achieve more sensitive and specific PCA3 detection; thus, it emerged as a promising tool for early cost-effective diagnosis.
Assuntos
Aptâmeros de Nucleotídeos , Neoplasias da Próstata , Antígenos de Neoplasias , Biomarcadores Tumorais/genética , DNA , Ouro , Humanos , Masculino , Azul de Metileno , Próstata , Neoplasias da Próstata/diagnóstico , Neoplasias da Próstata/genética , RNA MensageiroRESUMO
We have developed a clean route for the modification of polyvinylchloride surface (PVC) with 4-amino-5-hydrazino-1,2,4-triazole-3-thiol molecule. The modification reaction was investigated through Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS) analysis. According to our findings, S-H groups are responsible to the molecule attachment and nitrogen atoms are directly involved in metal ion coordination. These results are in agreement with the pseudo-second-order kinetic model, which infers that chemisorption is the main mechanism for metal removal. Adsorption isotherms of Cd(II), Cu(II) and Pb(II) follow the Langmuir model and the results indicated that Ns values are 0.39, 0.52 and 0.15â mmol g-1, respectively. The calculated Ømax values for Cu(II), Pb(II) and Cd(II) were 3.93, 2.95 and 1.13, respectively, indicating that three types of complex are formed depending on the adsorbed species. Therefore, it can be concluded that PVC use as adsorbent is feasible since it requires a simple modification reaction with nontoxic and low-cost solvents.
Assuntos
Poluentes Ambientais , Metais Pesados , Poluentes Químicos da Água , Adsorção , Cádmio/química , Cloretos , Concentração de Íons de Hidrogênio , Cinética , Chumbo , Nitrogênio , Cloreto de Polivinila , Polivinil , Solventes , Espectroscopia de Infravermelho com Transformada de Fourier , Água/química , Poluentes Químicos da Água/químicaRESUMO
A simple, rapid and effective analytical method based on fluorescence spectroscopy for the determination of coumarin in pharmaceutical formulations without pre-treatment or pre-concentration step was development. Coumarin had maximum excitation and emission at 310 nm and 390 nm, respectively. Optimum conditions for the detection of coumarin were investigated. Under optimized conditions, we observed a linear behavior for the sign of coumarin in the concentration range of 2.5 × 10(-6) to 1.0 × 10(-4) mol L(-1), with linearity of 0.998 and sensitivity of 2.9 × 10(10) u.a/mol L(-1). The proposed method was validated in terms of accuracy, precision and specificity of coumarin using the standard addition and external calibration. It was noted that the results support (P<0.05), indicating that the matrices were not an interference in the determination of coumarin by fluorescence spectroscopy. The results were favorable compared with those obtained by reference chromatographic methods.
Assuntos
Cumarínicos/análise , Espectrometria de Fluorescência/métodos , Comprimidos/química , Cumarínicos/química , Concentração de Íons de Hidrogênio , Limite de Detecção , Solventes/químicaRESUMO
A novel, easily renewable nanocomposite interface based on layer-by-layer (LbL) assembled cationic/anionic layers of carbon nanotubes customized with biopolymers is reported. A simple approach is proposed to fabricate a nanoscale structure composed of alternating layers of oxidized multiwalled carbon nanotubes upon which is immobilized either the cationic enzyme organophosphorus hydrolase (OPH; MWNT-OPH) or the anionic DNA (MWNT-DNA). The presence of carbon nanotubes with large surface area, high aspect ratio and excellent conductivity provides reliable immobilization of enzyme at the interface and promotes better electron transfer rates. The oxidized MWNTs were characterized by thermogravimetric analysis and Raman spectroscopy. Fourier transform infrared spectroscopy showed the surface functionalization of the MWNTs and successful immobilization of OPH on the MWNTs. Scanning electron microscopy images revealed that MWNTs were shortened during sonication and that LbL of the MWNT/biopolymer conjugates resulted in a continuous surface with a layered structure. The catalytic activity of the biopolymer layers was characterized using absorption spectroscopy and electrochemical analysis. Experimental results show that this approach yields an easily fabricated catalytic multilayer with well-defined structures and properties for biosensing applications whose interface can be reactivated via a simple procedure. In addition, this approach results in a biosensor with excellent sensitivity, a reliable calibration profile, and stable electrochemical response.
Assuntos
Técnicas Biossensoriais/métodos , Nanocompostos/química , Nanotecnologia/métodos , Arildialquilfosfatase/química , Arildialquilfosfatase/metabolismo , Catálise , DNA/química , DNA/metabolismo , Eletroquímica , Transporte de Elétrons , Enzimas Imobilizadas/química , Enzimas Imobilizadas/metabolismo , Cinética , Modelos Moleculares , Conformação Molecular , Nanotubos de Carbono/química , Polietilenoimina/química , Espectrofotometria Ultravioleta , Eletricidade Estática , Propriedades de SuperfícieRESUMO
The aim of the current study is to introduce a methodology aimed at producing a biosensor that uses gold nanoparticles (AuNPs) to detect porcine circovirus 2 (PCV-2). This biosensor was based on AuNPs, which were modified with self-assembled monolayers (SAMs) and antibodies. The AuNPs' surface and virus modification process applied to enable antibody binding was accompanied by localized surface plasmon resonance (LSPR), surface plasmon resonance (SPR), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX). Virus quantification was possible by the light absorption difference in the spectrum at concentrations of 105, 106, 107, 108, and 109 DNA copies/mL PCV-2 in relation to quantitative PCR (qPCR), with an R2 value >0.98. The visualization of colorimetric changes in the different PCV-2 concentrations was possible without the use of equipment. The biosensor production methodology presented reproducibility and specificity, as well as easy synthesis and low cost. An enhanced version of it may be used in the future to replace traditional tests such as PCR.
RESUMO
: The aim of the current study is to present a strategy to improve the efficiency of 5-fluorouracil (5-FU), which is widely used as antineoplastic agent against solid tumors-based on the use of gold nanocarriers to overcome the resistance of colorectal cancer cells. 5-FU was loaded on gold nanoparticles (AuNP) coated with anti-EGFR antibodies in order to target them towards colorectal cancer cells that overexpress epidermal growth factor receptors (EGFR). Physicochemical characterization has shown that AuNP size was approximately 20 nm and that AuNP functionalization led to spherical nanoparticles. Flow cytometry allowed observing that some compounds synthesized by our research group have induced apoptosis/necrosis and impaired the proliferation of colon cancer cell lines 'HCT-116' and 'HT-29'. The antibody/drug combination in AuNP (AuNP 5FU EGFR) has improved the apoptosis rate and impaired cell proliferation in both cell lines, regardless of the exposure time. Overall, these results have shown that AuNP functionalization with monoclonal antibodies focused on delivering 5-FU to tumor cells is an exciting strategy against colorectal cancer.
RESUMO
Generally, enzyme immobilization on nanoparticles leads to nano-conjugates presenting partially preserved, or even absent, biological properties. Notwithstanding, recent research demonstrated that the coupling to nanomaterials can improve the activity of immobilized enzymes. Herein, xanthine oxidase (XO) was immobilized by self-assembly on peculiar naked iron oxide nanoparticles (surface active maghemite nanoparticles, SAMNs). The catalytic activity of the nanostructured conjugate (SAMN@XO) was assessed by optical spectroscopy and compared to the parent enzyme. SAMN@XO revealed improved catalytic features with respect to the parent enzyme and was applied for the electrochemical studies of xanthine. The present example supports the nascent knowledge concerning protein conjugation to nanoparticle as a means for the modulation of biological activity.
RESUMO
A shell of nanostructured ferric tannates was spontaneously developed on the surface of naked maghemite nanoparticles (SAMNs, the core) by a simple wet reaction with tannic acid (TA). The as obtained core-shell nanomaterial (SAMN@TA) displays specific electrocatalytic and surface properties, which significantly differ from parent maghemite. Thanks to the known proclivity of TA to interact with proteins, SAMN@TA was proposed as a support for the direct immobilization of an enzyme. A ternary functional nanobioconjugate (SAMN@TA@TvL) was successfully self-assembled by incubating laccase from Trametes versicolor (TvL) and SAMN@TA. The SAMN@TA@TvL hybrid was kinetically characterized with respect to the native enzyme and applied for building an easy-to-use analytical device for the detection of polyphenols. The electrochemical biosensor allowed the determination of polyphenols by square wave voltammetry in mixed water-methanol solutions. The system sensitivity was 868.9⯱â¯1.9nA µM-1, the LOD was 81â¯nM and the linearity range was comprised between 100â¯nM and 10⯵M. The proposed approach was successfully applied to detect phenolics in blueberry extracts as real samples. Results suggest that SAMN@TA could be a promising, low cost and versatile tool for the creation of nano-bio-conjugates aimed at the development of new electrochemical sensing platforms.
Assuntos
Técnicas Eletroquímicas/métodos , Compostos Férricos/química , Lacase/química , Nanoestruturas/química , Fenóis/análise , CatáliseRESUMO
A new enzyme nanolithography strategy for creating conducting polymer nanostructures through the modification of AFM tips with peroxidase is described. Scanning of the modified tip in the presence of aniline and hydrogen peroxide is used for biocatalytic patterning of different polyaniline nanostructures (see figure).
Assuntos
Nanoestruturas/química , Peroxidase/química , Compostos de Anilina/química , Biocatálise , Condutividade Elétrica , Eletroquímica , Membranas Artificiais , Microscopia de Força Atômica , Microscopia Eletrônica de Varredura , Tamanho da Partícula , PolímerosRESUMO
A new immunosensor using hybrid nanomaterials for the detection of dengue virus was demonstrated in this work. This immunosensor composed of nanoparticles of γ-Fe2O3(SAMN) modified with MPA- SAMN@MPA was characterized by FTIR spectroscopy, transmission electron microscopy,quartz crystal microbalance, UV-vis and LSPR technique. The binding of SAMN@MPA with AuNPs conjugated with aptamers(SAMN@MPA@AuNPs@aptamer) provides specific chemical bonds to four dengue serotypes. Colorimetric changes in the modification steps provided rapid visual detection of the virus without the use of equipment. Variations of aptamers concentrations 1.0-10.0 µM where the 3.0 µM aptamer concentration is sufficient to completely cover the surface of the modified AuNPs with an R2 value of>â¯0.99. This new proposed methodology presenting some advantages in relation to traditional detection methods such as time optimization and cost,can be used as a diagnostic method.
Assuntos
Aptâmeros de Nucleotídeos/química , Vírus da Dengue/isolamento & purificação , Óxido Ferroso-Férrico/química , Imunoensaio , Nanopartículas de Magnetita/química , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
An acetylcholinesterase (AchE) based amperometric biosensor was developed by immobilisation of the enzyme onto a self assembled modified gold electrode. Cyclic voltammetric experiments performed with the SAM-AchE biosensor in phosphate buffer solutions (pH = 7.2) containing acetylthiocholine confirmed the formation of thiocholine and its electrochemical oxidation at Ep = 0.28 V vs Ag/AgCl. An indirect methodology involving the inhibition effect of parathion and carbaryl on the enzymatic reaction was developed and employed to measure both pesticides in spiked natural water and food samples without pre-treatment or pre-concentration steps. Values higher than 91-98.0% in recovery experiments indicated the feasibility of the proposed electroanalytical methodology to quantify both pesticides in water or food samples. HPLC measurements were also performed for comparison and confirmed the values measured amperometrically.
RESUMO
The aim of the present research is to propose a new method based on localized surface plasmon resonance (LSPR) for fast dengue virus detection. A pool with four dengue serotypes (DENV-1, -2, -3, -4) was detected through antigen-antibody binding using gold nanoparticles (AuNPs) as signaling antibody carriers. Such result was confirmed through surface plasmon resonance (SPR), transmission electron microcopy (TEM), and dynamic light scattering (DLS) techniques. The limit of detection was calculated for TCID50 107 demonstrating a linear correlation between viral concentration and number of cells with an r2 value of > 0.993. The assay presented good sensibility and reproducibility of results and the negative controls were not mistakenly detected. This design requires no pretreatment or high trained person. In the future, it can be used in commercial antibody detection kits.
Assuntos
Anticorpos Antivirais/metabolismo , Técnicas Biossensoriais/métodos , Vírus da Dengue/isolamento & purificação , Dengue/diagnóstico , Testes Diagnósticos de Rotina/métodos , Nanopartículas Metálicas , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Ressonância de Plasmônio de SuperfícieRESUMO
The presence of Gram-positive bacteria in foodstuffs is a chronic worldwide problem. Here, we present a cheap and simple colorimetric method for the detection of Lactobacillus species (spp.) and Staphylococcus aureus (S. aureus) using gold nanoparticles (AuNP) modified with monoclonal anti-Gram-positive bacteria to produce an immune-sensor. Detection is based on the fact that antibody-conjugated AuNPs can readily identify Gram-positive bacteria through antibody-antigen recognition, which results in a color change of AuNPs upon aggregation. The detection limit was 105CFU/ml in pure culture for Lactobacillus spp. and 120CFU/ml in pure culture for S. aureus. The method was applied successfully for detection of bacteria in samples of sugar cane, and agreed well with values obtained using other methods. These results suggested that the detection system could be used for the quantitative analysis of Gram-positive bacteria and might be applied potentially by the food industry.
Assuntos
Técnicas Biossensoriais/métodos , Ouro , Lactobacillus/isolamento & purificação , Nanopartículas Metálicas , Staphylococcus aureus/isolamento & purificação , Colorimetria/métodos , Limite de DetecçãoRESUMO
We describe the amperometric detection of glucose using oriented nanowires with magnetic switching of the bioelectrochemical process. The fabrication process of the nanowires was prepared through controlled nucleation and growth during a stepwise electrochemical deposition, and it was characterized using scanning electron microscopy. Cyclic voltammetry and amperometry were used to study the magnetoswitchable property; this control was accomplished by changing the surface orientation of nanowires. Under the optimal condition, the amperometric response was also linear up to a glucose concentration of 0.1-16.0 mmol L(-1) with a sensitivity of 81 µA mM(-1). The detection limit was estimated for 4.8×10(-8) mol L(-1), defined from a signal/noise ratio of 3. It also exhibits good reproducibility and high selectivity with insignificant interference from ascorbic acid, acetoaminophen, and uric acid. The resulting biosensor was applied to detect the blood sugar in human serum samples without any pretreatment, and the results were comparatively in agreement with the clinical assay.
Assuntos
Técnicas Biossensoriais , Glicemia/análise , Nanotecnologia/métodos , Nanofios/química , Acetaminofen/química , Ácido Ascórbico/química , Catálise , Técnicas Eletroquímicas , Eletrodos , Glucose Oxidase/química , Humanos , Concentração de Íons de Hidrogênio , Limite de Detecção , Magnetismo , Microscopia Eletrônica de Varredura , Reprodutibilidade dos Testes , Ácido Úrico/químicaRESUMO
Seamless integration of biological components with electrochemical sensors is critical in the development of microdevices for cell analysis. The present paper describes the integration miniature Au electrodes next to immune cells (macrophages) in order to detect cell-secreted hydrogen peroxide (H(2)O(2)). Photopatterning of poly(ethylene glycol) (PEG) hydrogels was used to both immobilize horseradish peroxidase molecules onto electrodes and to define regions for cell attachment in the vicinity of sensing electrodes. Electrodes micropatterned in such a manner were enclosed inside poly(dimethylsiloxane) fluid conduits and incubated with macrophages. The cells attached onto the exposed glass regions in the vicinity of the electrodes and nowhere else on the non-fouling PEG hydrogel surface. A microfluidic device was converted into an electrochemical cell by placing flow-through Ag∕AgCl reference and Pt wire counter electrodes at the outlet and inlet, respectively. This microdevice with integrated H(2)O(2)-sensing electrodes had sensitivity of 27 µA∕cm(2) mM with a limit of detection of 2 µM. Importantly, this microdevice allowed controllable seeding of macrophages next to electrodes, activation of these cells and on-chip monitoring of H(2)O(2) release in real time. In the future, this biosensor platform may be utilized for monitoring of macrophage responses to pathogens or for the study of inflammatory signaling in micropatterned cell cultures.