Impact of high-pressure treatment on casein micelles, whey proteins, fat globules and enzymes activity in dairy products: a review.

The quality and safety of food products are the two factors that most influence the demands made by consumers. Contractual food sterilization and preservation methods often result in unfavorable changes in functional properties of foods. High-pressure processing (HPP) (50-1000 MPa) is a non-thermal preservation technique, which can effectively reduce the activity of spoilage and pathogenic microorganisms with minimal impact on the functional and nutritional properties of food. Comprehensive inquires have disclosed the potential profits of HPP as an alternative to heat treatments by affecting the structure of milk components, particularly proteins and fats. The present paper aims to investigate the effects of HPP on milk components including fats, casein, whey proteins, enzymes, and minerals, as well as on the industrial production of milk and dairy products including cheese, yogurt, ice cream, butter, cream, and probiotic dairy products. HPP allows to extend shelf life of products without the use of additives, meeting current consumer demands. The assurance of microbial safety and the production of food products with minimal changes in quality characteristics (organoleptic, nutritional, and rheological properties) are among its main effects. In addition, the nutritional value of HPP-treated dairy products is also preserved.

Cadmium ion removal from aqueous media using banana peel biochar/Fe3O4/ZIF-67.

In the present study, banana peel waste was used as a suitable source for biochar production. The banana peel biochar (BPB) was modified using Fe3O4 magnetic and ZIF-67 nanoparticles. The modification of the BPB surface (4.70 m2/g) with Fe3O4 and Fe3O4/ZIF-67 significantly increased the specific surface of the nanocomposites (BPB/Fe3O4: 78.83 m2/g, and BPB/Fe3O4/ZIF-67: 1212.40 m2/g). The effect of pH, temperature, contact time, adsorbent dose, and concentration of Cd2+ on the efficiency of the Cd2+ adsorption was explored. Maximum adsorption efficiencies for BPB (97.76%), BPB/Fe3O4 (97.52%), and BPB/Fe3O4/ZIF-67 (99.14%) were obtained at pH 6, Cd2+ concentration of 10 mg/L, times of 80 min, 50 min, and 40 min, and adsorbent doses of 2 g/L, 1.5 g/L, and 1 g/L, respectively. Thermodynamic measurements indicated that the process is spontaneous and exothermic. The maximum capacity of Cd2+ adsorption using BPB, BPB/Fe3O4, and BPB/Fe3O4/ZIF-67 were obtained 20.63 mg/g, 30.33 mg/g, and 50.78 mg/g, respectively. The Cd2+ adsorption using magnetic nanocomposites followed the pseudo-first-order kinetic model. The results showed that studied adsorbents especially BPB/Fe3O4/ZIF-67 have a good ability to adsorb-desorb Cd2+ and clean an effluent containing pollutants.

Adsorption ability evaluation of the poly(methacrylic acid-co-acrylamide)/cloisite 30B nanocomposite hydrogel as a new adsorbent for cationic dye removal.

The performance of poly(methacrylic acid-co-acrylamide)/Cloisite 30B nanocomposite (poly(MAA-co-AAm)/Cl30B) hydrogel to adsorb methylene blue (MB) dye from aqueous solutions was investigated and the adsorption efficiency was improved by incorporating Cloisite 30B nanoclays in the adsorbent structure. The hydrogels were analyzed using FTIR, XRD, TGA, and SEM analysis. The effect of adsorbent dose, temperature, initial dye concentration, contact time, and pH on the efficiency of the adsorption process was investigated. Adsorption efficiencies of 98.57 and 97.65% were obtained for poly(MAA-co-AAm)/Cl30B nanocomposite and poly(MAA-co-AAm) hydrogels, respectively. Kinetic study revealed that the adsorption process followed pseudo-first-order kinetic model and α-parameter values of 6.558 and 1.113 mg/g.min were obtained for poly(MAA-co-AAm)/Cl30B nanocomposite and poly(MAA-co-AAm) hydrogels, respectively indicating a higher ability of nanocomposite hydrogel in adsorbing MB-dye. In addition, the results of the intra-particle diffusion model showed that various mechanisms such as intra-particle diffusion and liquid film penetration are important in the adsorption. The Gibbs free energy parameter of adsorption process showed negative values of -256.52 and -84.071 J/mol.K for poly(MAA-co-AAm)/Cl30B nanocomposite and poly(MAA-co-AAm) hydrogels indicating spontaneous nature of the adsorption. The results of enthalpy and entropy showed that the adsorption process was exothermic and random collisions were reduced during the adsorption. The equilibrium data for the adsorption process using poly(MAA-co-AAm)/Cl30B nanocomposite and poly(MAA-co-AAm) hydrogels followed Freundlich and Langmuir isotherm models, respectively. The maximum adsorption capacity values of 32.83 and 21.92 mg/g were obtained for poly(MAA-co-AAm)/Cl30B nanocomposite and poly(MAA-co-AAm) hydrogels, respectively. Higher adsorption capacity of nanocomposite hydrogel was attributed to the presence of Cloisite 30B clay nanoparticles in its structure. In addition, results of RL, n, and E parameters showed that the adsorption process was performed optimally and physically.

Effect of microbial lipase and transglutaminase on the textural, physicochemical, and microbial parameters of fresh quark cheese.

In this study, the addition of microbial transglutaminase (MTG) and lipase in quark cheese samples was studied during storage (21 d). Four types of cheese were made using 3 different levels of MTG (T1, 0.1 g/L; T2, 0.2 g/L; T3, 0.3 g/L) and lipase (T1, 0.02 g/L; T2, 0.04 g/L; T3, 0.06 g/L), and one cheese was made without any treatment as a control sample. The physicochemical, textural, microbial, and sensory properties of cheese samples were monitored at 1, 7, 14, and 21 d of storage period. The results showed that the treated samples had higher proteolysis and lipolysis activities during storage than the control sample. The textural analysis indicated an insignificant increase in the hardness value of the enzyme-treated sample. Also, the sensory analysis exhibited that the treated samples had higher texture acceptability. The higher concentration of enzymes resulted in lower color, odor, taste, and overall acceptability, and higher microbial population. Finally, the addition of microbial MTG and lipase in preparation of quark cheese samples could be recommended for a short storage time.

Adsorption of Crystal Violet Dye Using Activated Carbon of Lemon Wood and Activated Carbon/Fe3O4 Magnetic Nanocomposite from Aqueous Solutions: A Kinetic, Equilibrium and Thermodynamic Study.

Activated carbon prepared from lemon (Citrus limon) wood (ACL) and ACL/Fe3O4 magnetic nanocomposite were effectively used to remove the cationic dye of crystal violet (CV) from aqueous solutions. The results showed that Fe3O4 nanoparticles were successfully placed in the structure of ACL and the produced nanocomposites showed superior magnetic properties. It was found that pH was the most effective parameter in the CV dye adsorption and pH of 9 gave the maximum adsorption efficiency of 93.5% and 98.3% for ACL and ACL/Fe3O4, respectively. The Dubinin-Radushkevich (D-R) and Langmuir models were selected to investigate the CV dye adsorption equilibrium behavior for ACL and ACL/Fe3O4, respectively. A maximum adsorption capacity of 23.6 and 35.3 mg/g was obtained for ACL and ACL/Fe3O4, respectively indicating superior adsorption capacity of Fe3O4 nanoparticles. The kinetic data of the adsorption process followed the pseudo-second order (PSO) kinetic model, indicating that chemical mechanisms may have an effect on the CV dye adsorption. The negative values obtained for Gibb's free energy parameter (-20 < ΔG < 0 kJ/mol) showed that the adsorption process using both types of the adsorbents was physical. Moreover, the CV dye adsorption enthalpy (ΔH) values of -45.4 for ACL and -56.9 kJ/mol for ACL/Fe3O4 were obtained indicating that the adsorption process was exothermic. Overall, ACL and ACL/Fe3O4 magnetic nanocomposites provide a novel and effective type of adsorbents to remove CV dye from the aqueous solutions.

Physicochemical, Thermal and Rheological Properties of Pectin Extracted from Sugar Beet Pulp Using Subcritical Water Extraction Process.

The objective of this study was to characterize the properties of pectin extracted from sugar beet pulp using subcritical water (SWE) as compared to conventional extraction (CE). The research involved advanced modeling using response surface methodology and optimization of operational parameters. The optimal conditions for maximum yield of pectin for SWE and CE methods were determined by the central composite design. The optimum conditions of CE were the temperature of 90 °C, time of 240 min, pH of 1, and pectin recovery yield of 20.8%. The optimal SWE conditions were liquid-to-solid (L/S) ratio of 30% (v/w) at temperature of 130 °C for 20 min, which resulted in a comparable yield of 20.7%. The effect of obtained pectins on viscoamylograph pasting and DSC thermal parameters of corn starch was evaluated. The contents of galacturonic acid, degree of methylation, acetylation, and ferulic acid content were higher in the pectin extracted by SWE, while the molecular weight was lower. Similar chemical groups were characterized by FTIR in both SWE and CE pectins. Color attributes of both pectins were similar. Solutions of pectins at lower concentrations displayed nearly Newtonian behavior. The addition of both pectins to corn starch decreased pasting and DSC gelatinization parameters, but increased ΔH. The results offered a promising scalable approach to convert the beet waste to pectin as a value-added product using SWE with improved pectin properties.

Sugar beet pectin extracted by ultrasound or conventional heating: a comparison.

The yield and quality of sugar beet pulp pectin obtained by ultrasound-assisted extraction (UAE) were compared to those obtained by conventional heating. Extraction temperature (70-90) °C, extraction time (2-4) h and pH (1-1.5) were considered as the variables for the conventional extraction while ultrasound frequency (20-60) kHz, time (10-30) min and amplitude (60-100%) were considered as the variables for UAE. The optimal conditions for maximum yield of pectin for conventionally and ultrasonically extracted pectin were determined by the central composite design and the Box Behnken design, respectively. The optimum conditions of conventional extraction were the temperature of 90 °C, time of 4 h and pH of 1. The optimum conditions of UAE were ultrasound frequency of 20 kHz, time of 10 min, and ultrasound amplitude of 96%. Extraction using the optimized conditions of conventional heating and UAE achieved the best yield of 20.75% and 20.85%, respectively. The degree of methyl esterification, ferulic acid content and molecular weight of UAE pectin were higher than conventionally extracted pectin but the content of galacturonic acid in UAE pectin was lower than that of conventionally extracted pectin. The infrared spectra of both pectins revealed the occurrence of polysaccharide component. The pectin achieved by UAE had higher lightness value than conventionally extracted pectin, confirming its application in different products partially in bright food products. The UAE pectin possessed higher viscosity than conventionally extracted pectin. The addition of UAE pectin increased all of the DSC gelatinization parameters. Overall, UAE could be a promising scalable and economical approach to obtain pectin with unique characteristics.

Properties and Application of Multifunctional Composite Polypropylene-Based Films Incorporating a Combination of BHT, BHA and Sorbic Acid in Extending Donut Shelf-Life.

To extend the shelf-life of packaged donut without the addition of preservative, polypropylene-based active composite films loaded with a combination of sorbic acid, BHA and BHT were prepared by the extrusion moulding method: T1 (Control-pure PP-film), T2 (PP-BHT1%-SA2%), T3 (PP-BHA3%-SA2%) and T4 (PP-BHT1%-BHA1%-SA2%). The incorporation of active additives enhanced water vapour permeability (WVP) and increased oxygen permeability of films. Active films had higher antioxidant activity than pure PP in the order T4 > T2 > T3 (89.11, 83.40 and 79.16%). In vitro examinations demonstrated a significant antibacterial effect on Escherichia coli and S. aureus growth. Overall migration was not significantly different for watery food simulants, while in acidic and fatty foods increased it significantly. The effect of the active films on the fried and packaged donut samples showed significantly higher moisture contents and peroxide values, while acidity was lower. T2 film is proposed due to the preservation of the intrinsic properties of the film, increasing the storage period up to 25 to 50 days.

Properties of Dried Apricots Pretreated by Ultrasound-Assisted Osmotic Dehydration and Application of Active Coatings.

RESEARCH BACKGROUND: The worldwide demand for healthy and sulphur-free dried vegetables and fruits has grown. Combined ultrasound-assisted osmotic dehydration (UOD) and application of active coatings incorporating natural preservatives represents an attractive alternative to sulphuring to preserve the sensorial and nutritional quality of dried fruits. The aim of this study is to investigate the effect of osmotic dehydration (OD) and UOD, and the use of pectin coatings (alone or with citric acid or ascorbic acid) on physical, textural and microstructural properties of hot air-dried apricots. EXPERIMENTAL APPROACH: Fresh apricot cubes (1 cm3) were pretreated with either OD at 55 °C for 30 and 45 min or UOD at two ultrasonic frequencies of 25 and 35 kHz for 30 and 45 min followed by application of active coatings with pectin alone, pectin with citric acid or pectin with ascorbic acid for 10 min. All pretreated coated samples were then hot air-dried at 60 °C until a final moisture content of 20% (wet basis) was reached. Physical (shrinkage, apparent and bulk densities), chemical (browning value and water activity) and textural properties (firmness and shrinkage), microstructure and microbial load of dried apricots were studied. RESULTS AND CONCLUSIONS: Application of OD and UOD improved physical and textural properties of the dried apricots. Moreover, apparent and bulk densities, rehydration capacity of OD and UOD pre-treated samples increased, while shrinkage, water activity and microbial load decreased. Firmness of UOD pretreated samples was significantly (p<0.05) lower than that of OD ones. Likewise, increasing ultrasound frequency from 25 to 35 kHz led to a significant decrease in F max values of dried apricots. Furthermore, coating of the processed samples with pectin and citric acid increased F max value and decreased rehydration capacity of dried apricots. Scanning electron microscopy of both OD and UOD samples illustrated improvement of textural properties. The utilization of both OD pretreatment and edible pectin coatings resulted in a decrease in browning values. However, UOD increased browning values of the dried apricots. Coating of UOD samples with pectin and ascorbic acid resulted in substantial discolouration in hot air-dried apricots. NOVELTY AND SCIENTIFIC CONTRIBUTION: This study advances the knowledge in the field of fruit drying by combined application of OD or UOD pretreatments with active edible coatings on different properties of hot air-dried apricots.

Effect of infrared-assisted spouted bed drying of flaxseed on the quality characteristics of its oil extracted by different methods.

BACKGROUND: Infrared (IR)-assisted spouted bed drying (SBD) has emerged as a potential alternative to the traditional hot air drying for heat sensitive components. The aim of this study was to investigate effect of IR-assisted SBD and application of cold press (CP), solvent extraction (SE) and ultrasound assisted extraction (UAE) on the quality of flaxseed oil. SBD and IR-assisted SBD were performed at air temperatures of 40, 60, 80 °C and their effects on the drying rate, fatty acids composition and oil peroxide and acid values were evaluated. Quality of oil extracted from the dried flaxseeds by CP, SE and UAE methods was then evaluated. RESULTS: Increasing air temperature in the presence of IR increased the drying rate. The peroxide values (PVs) of IR-SBD samples were higher than those of SBD at the same temperature. IR treatment did not notably change the composition of fatty acids in flaxseed oil, except in linoleic acid content. UAE gave higher extraction yield than CP and SE methods. UAE yielded an oil with higher percentage of saturated fatty acids, whereas the percentage of omega-3 and omega-6 fatty acids was higher in the CP method. The oil extracted by CP exhibited lower levels of PV (0.516 meq O2 /kg oil) and acid value (1.36%), as compared to oils extracted by SE and UAE methods. CONCLUSION: Both UAE and conventional methods did not significantly influence the composition of fatty acids in the extracted oils. Nonetheless, the CP method yielded an oil with a high percentage of omega-3 and omega-6 fatty acids. © 2019 Society of Chemical Industry.

Effect of active antimicrobial films on quality parameters and shelf-life of fresh yufka dough.

This research aimed to develop polypropylene (PP) antimicrobial films loaded with different concentrations of sorbic acid (SA) for packaging of fresh yufka dough. PP-SA at 6% showed improved mechanical, UV absorption, and moisture barrier properties. Also, the obtained films exhibited in vitro antibacterial and anti-mold properties. Moisture content and aw of packaged dough with different types of active films were not significantly changed upon storage period. Extended storage of dough layered with PP-SA films at concentrations 0-4% for 45 days led to significant decrease of pH from 5.75 in fresh dough to 5.05 in control (p < 0.05). Color attributes including yellowness and whiteness indices of dough were declined and increased, respectively as function of prolonged storage and increase in the concentration of SA. The growth of aerobic psychrotrophic bacteria and filamentous fungi were significantly retarded in yufka dough packaged with PP-SA6% film compared to that packaged with control as well as PP-SA2-4% films. Direct addition of SA into the bulk of dough was not effective in preservation of dough against the growth of bacteria and fungi. Application of antimicrobial preservatives in the composition of PP films could be beneficial in preserving fresh foods such as bakery products against spoilage microorganisms.

Enhancing Encapsulation Efficiency of Chavir Essential Oil via Enzymatic Hydrolysis and Ultrasonication of Whey Protein Concentrate-Maltodextrin.

This study focused on the characterization of emulsions and microparticles encapsulating Chavir essential oil (EO) by application of modified whey protein concentrate-maltodextrin (WPC-MD). Different physical, chemical, morphological, thermal, and antioxidant properties and release behavior of spray-dried microparticles were assessed. Antioxidant, solubility, emulsifying, and foaming activities of modified WPC were increased compared to those of primary material. The results indicated that the particle size distribution varied depending on the type of carriers used, with the smallest particles formed by hydrolyzed WPC (HWPC). Binary blends of modified WPC-MD led to improved particle sizes. The spray-drying yield ranged from 64.1% to 85.0%, with higher yields observed for blends of MD with sonicated WPC (UWPC). Microparticles prepared from primary WPC showed irregular and wrinkled surfaces with indentations and pores, indicating a less uniform morphology. The UWPC as a wall material led to microparticles with increased small cracks and holes on their surface. However, HWPC negatively affected the integrity of the microparticles, resulting in broken particles with irregular shapes and surface cracks, indicating poor microcapsule formation. Encapsulating EO using WPC-MD increased the thermal stability of EO significantly, enhancing the degradation temperature of EO by 2 to 2.5-fold. The application of primary WPC (alone or in combination with MD) as wall materials produced particles with the lowest antioxidant properties because the EO cannot migrate to the surface of the particles. Enzymatic hydrolysis of WPC negatively impacted microparticle integrity, potentially increasing EO release. These findings underscore the crucial role of wall materials in shaping the physical, morphological, thermal, antioxidant, and release properties of spray-dried microparticles, offering valuable insights for microencapsulation techniques.

Incorporation of spray-dried encapsulated bioactive peptides from coconut (Cocos nucifera L.) meal by-product in bread formulation.

This study aimed to stabilize and mask the bitterness of peptides obtained from the enzymatic hydrolysis of coconut-meal protein with maltodextrin (MD) and maltodextrin-pectin (MD-P) as carriers via spray-drying. Essential (~35%), hydrophobic (~32%), antioxidant (~15%), and bitter (~45%) amino acids comprised a significant fraction of the peptide composition (with a degree of hydrolysis of 33%). The results indicated that the peptide's production efficiency, physical and functional properties, and hygroscopicity improved after spray-drying. Morphological features of free peptides (fragile and porous structures), spray-dried with MD (wrinkled with indented structures), and MD-P combination (relatively spherical particles with smooth surfaces) were influenced by the process type and feed composition. Adding free and microencapsulated peptides to the bread formula (2% W/W) caused changes in moisture content (35%-43%), water activity (0.89-0.94), textural properties (1-1.6 N), specific volume (5.5-6 cm3/g), porosity (18%-27%), and color indices of the fortified product. MD-P encapsulated peptides in bread fortification resulted in thermal stability and increased antioxidant activity (DPPH and ABTS+ radical scavenging: 4.5%-39.4% and 31.6%-46.8%, respectively). MD-P (as a carrier) could maintain sensory characteristics and mask the bitterness of peptides in the fortified bread. The results of this research can be used to produce functional food and diet formulations.

Physico-chemical and functional properties of spray-dried sourdough in breadmaking.

In present study, spray-dried sourdough was produced using a pilot scale spray dryer and the physico-chemical and microbial characteristics of the obtained sourdough powder were investigated. The application of the spray-dried sourdough at different levels (3%, 6%, 9% and 15%) in breadmaking was also evaluated. Bulk density, wettability and suspensibility of the sourdough powder were 0.6 g/cm(3), 98 s and 29%, respectively. The most of the powder particles were in a range of 106-250 µm. The spray-dried sourdough had a moisture content and ash content of 3.72% and 1.9% (db), respectively. The pH and total titratable acidity of the sourdough powder were 3.26 and 59 (mL of 0.1 N NaOH/10 g powder), respectively. Spray drying reduced lactic acid bacteria population of the sourdough to 2 × 10(5) CFU/g compared to the initial value of 10(9) CFU/g. Iranian traditional flat bread (Sangak) made with different levels of the sourdough powder had significantly (p < 0.05) lower pH and higher total titratable acidity compared to those of the control. The results of sensory evaluation showed that Sangak breads containing 15% sourdough powder were slightly darker and sourer than the other breads. Incorporation of spray-dried sourdough delayed bread staling, as judged by sensory panel. The results suggest that spray-dried sourdough at the level of 9% can be successfully used for Sangak breadmaking, leading to bread with an improved flavor and delayed staling.

Physicochemical, antioxidant, antimicrobial, and in vitro cytotoxic activities of corn pollen protein hydrolysates obtained by different peptidases.

The applications of protein hydrolysates as food preservatives and nutraceutical ingredients have attracted much attention because of their beneficial effects. The interest in these ingredients has shifted toward their biological activities with benefits to human health. Bioactive peptides are known as antioxidant agents that could promote health-promoting effects and prolong food shelf-life beyond their basic nutritional value. Thus, the aim of this study was to investigate antioxidant, antimicrobial, and in vitro cytotoxic properties of corn pollen protein (CPP) hydrolysates obtained by different enzymes. Proteolytic activity in terms of degree of hydrolysis (DH) and SDS-PAGE analysis was measured in pancreatin (H-Pan), pepsin (H-Pep), and trypsin (H-Tri) hydrolysates. Amino acid composition, antioxidant and antimicrobial activities, and cytotoxicity of hydrolysates were evaluated. DH and SDS-PAGE revealed higher proteolytic activity of pepsin compared to other enzymes. Amino acid analysis showed that the functional amino acids such as antioxidant types were most predominant in H-Pep compared to two other samples. Antioxidant activity of hydrolysates was found to be affected by the type of enzyme and the concentration of hydrolysates. There was a significant difference (p < 0.05) between antioxidant activity of different hydrolysates. The highest antioxidant activity in terms of Trolox equivalent antioxidant capacity (0.23-2.75 mM), DPPH (33.3%-64.8%), and hydroxyl (33.7%-63.2%) radical scavenging activities, chelation of iron (33.2%-62.5%) and copper (30.2%-50.5%) metals, and total antioxidant activity (0.65-0.85) was obtained for H-Pep followed by H-Pan and H-Tri samples. Antibacterial tests showed that pepsin-hydrolyzed protein was not significantly (P > 0.05) effective against E. coli at any concentrations, however, it showed significant (P < 0.05) concentration-dependent effect against S. aureus (with inhibition zones of 15-25 mm). Cytotoxicity results revealed that CPP, as a nonhydrolyzed protein, did not generally show antiproliferative activity, however, a significant (P < 0.05) ability of H-Pep hydrolysate in decreasing HT-29 colon cancer cell line viability was seen in a concentration-dependent manner (the lowest cell viability of 32% at 5 mg/mL). Overall, investigating the application of protein-based hydrolysates is one of the possible strategies that govern their applied intentions as preservatives and nutraceuticals in the food and pharmaceutical industries.

Nanoencapsulation of Chavir (Ferulago angulata) essential oil in chitosan carrier: Investigating physicochemical, morphological, thermal, antimicrobial and release profile of obtained nanoparticles.

The essential oil obtained by steam-distillation from Ferulago angulata (FA) was stabilized by ionic-gelation technique within chitosan nanoparticles (CSNPs). The aim of this study was to investigate different properties of CSNPs loaded with FA essential oil (FAEO). GC-MS analysis detected the major components of FAEO as α-pinene (21.85 %), ß-ocimene (19.37 %), bornyl acetate (10.50 %) and thymol (6.80 %). Due to presence of these components, FAEO showed stronger antibacterial activity against S. aureus and E. coli with MIC values of 0.45 and 2.12 mg/mL, respectively. Chitosan to FAEO ratio of 1: 1.25 exhibited a maximum encapsulation efficiency (60.20 %) and loading capacity (24.5 %) values. By increasing loading ratio from 1:0 to 1:1.25, mean particle size and polydispersity index were significantly (P < 0.05) increased from 175 to 350 nm and 0.184 to 0.32, respectively, while zeta potential was decreased from +43.5 to +19.2 mV, indicating the physical instability of CSNPs at higher FAEO loading concentrations. SEM observation proved successful formation of spherical CSNPs during the nanoencapsulation of EO. FTIR spectroscopy indicated successful physical entrapment of EO within CSNPs. Differential scanning calorimetry also proved the physical entrapment of FAEO into polymeric matrix of chitosan. XRD exhibited a broad peak at 2θ = 19° - 25° in loaded-CSNPs as indication of successful entrapment of FAEO within CSNPs. Thermogravimetric analysis showed that encapsulated essential oil was decomposed at higher temperature than its free from, indicating the success of encapsulation technique in stabilizing FAEO within CSNPs.

Biological stabilization of natural pigment-phytochemical from poppy-pollen (Papaver bracteatum) extract: Functional food formulation.

In this study, poppy-pollen extract (as a novel source of pigment and natural phytochemical) was microencapsulated. The spray-drying process maintained the encapsulation efficiency (EE) of phenolic (84-93%), anthocyanins (71-83%), and also antioxidant activity of extract in inhibiting DPPH (68-80%), ABTS (74-95%), OH (63-74%) radicals and reducing power (84-95%). The results of the Photo- and thermal (40-70˚C) stability of the bioactive compounds (TPC and TAC) indicated the thermal degradation and decomposition of particles' surface compounds during storage. The chemical (FTIR) and morphological analyses respectively revealed the insertion of extract compounds in the carrier matrix and the production of healthy particles with wrinkled structures. An increase in the carrier concentration elevated physical-stability, maintained structural properties, reduced hygroscopicity, and formed liquid/solid bridges or deliquescence phenomenon. The evaluation of the color histogram of the fortified gummy-candies indicated the usability of the spray-dried PP extract in producing an attractive red color with high sensory perception.

Application of low-, and medium-molecular weight chitosan for preparation of spray-dried microparticles loaded with Ferulago angulata essential oil: Physicochemical, antioxidant, antibacterial and in-vitro release properties.

The present work aimed at spray-drying encapsulation of Chavir (Ferulago angulata) essential oil (EO) using low-, and medium-molecular weight chitosan. The obtained EO was observed to be mainly composed of ß-ocimene, α-pinene, and bornyl acetate with antioxidant, and antimicrobial activity. The results indicated that stable emulsions with uniform particle size distribution and encapsulation efficiencies higher than 93 % could be prepared using chitosan as feed for spray-drying. In addition, spray-drying resulted in fabricating stable microspheres with yields higher than 50 %, uniform particle size, and encapsulation efficiency exceeding 70 %. The microspheres were fairly soluble and hygroscopic, and exhibited antioxidant and bacteriostatic activities with a biphasic release pattern. FTIR characterisation confirmed successful encapsulation of EO and thermal properties of microspheres indicated enhanced stability of EO after microencapsulation. Overall, it was revealed that molecular weight of chitosan and EO:chitosan ratio affects some physicochemical properties of obtained chitosan microspheres.

Microencapsulation of Yerba mate extract: The efficacy of polysaccharide/protein hydrocolloids on physical, microstructural, functional, and antioxidant properties.

Effects of hydrolyzed whey protein concentrate (WPC) and its combination with polysaccharides as wall material in spray-drying microencapsulation of Yerba mate extract (YME) have not been investigated yet. Therefore, it is hypothesized that the surface-active properties of WPC or WPC-hydrolysate may improve different properties of spray-dried microcapsules (such as physicochemical, structural, functional and morphological properties) compared to neat MD and GA. Thus, the objective of current study was to produce microcapsules loaded with YME by different carrier combinations. Effect of maltodextrin (MD), maltodextrin-gum Arabic (MD-GA), maltodextrin-whey protein concentrate (MD-WPC), and maltodextrin-hydrolyzed WPC (MD-HWPC) as encapsulating hydrocolloids was studied on physicochemical, functional, structural, antioxidant and morphological characteristics of the spray-dried YME. The type of carrier significantly affected spray dying yield. Enzymatic hydrolysis by improving the surface activity of WPC increased its efficiency as a carrier and produced particles with high production yield (about 68 %) and excellent physical, functional, hygroscopicity and flowability indices. Chemical structure characterization by FTIR indicated the placement of phenolic compounds of the extract in the carrier matrix. FE-SEM study showed that the microcapsules produced with polysaccharide-based carriers were completely wrinkled, whereas, the surface morphology of particles was improved when protein-based carriers were applied. Among the produced samples, the highest amount of TPC (3.26 mg GAE/mL), inhibition of DPPH (76.4 %), ABTS (88.1 %) and hydroxyl (78.1 %) free radicals were related to microencapsulated extract with MD-HWPC. The results of this research can be used to stabilize plant extracts and produce powders with appropriate physicochemical properties and biological activity.

Structural modification of poppy-pollen protein as a natural antioxidant, emulsifier and carrier in spray-drying of O/W-emulsion: Physicochemical and oxidative stabilization.

This study was aimed to investigate the efficiency of poppy-pollen (PP) protein and peptides as carrier for spray-drying encapsulation of grape-seed oil (GSO). The composition of amino acids, functional properties and bioactivity (scavenging of DPPH, ABTS, OH, and nitric-oxide radicals, reducing power, total antioxidant, TBARS levels in O/W-emulsion, and chelation of Fe2+ and Cu2+ ions) of PP-protein were affected by the enzymolysis time. Partial enzymolysis (30 min) led to improved solubility, protein surface activity and increased physical stability of GSO/W emulsion (relative to creaming, aggregation and flocculation) during storage. Also, spray-dried emulsions with this type of carrier (H-30) had the highest production yield (~67 %), solubility (~92 %), flowability, encapsulation efficiency (~96 %), reconstitution ability (least size and EE changes), physical and oxidative stability. The evaluation of the chemical structures (FTIR) indicated the formation of hydrogen bonds between the cis-alkene groups of fatty acids and the hydroxyl groups of the amide A and B regions, as well as the trapping of oil in the carrier matrix. SEM images illustrated the effect of native protein carriers (particles with smooth, dents, and hollow surfaces with surface pores), partially (wrinkled and reservoir-type), and strongly (irregular structures, sticky and amorphous agglomerates) hydrolyzed peptides on the morphology of oily-particles. The results of this research indicate the usability of partially hydrolyzed poppy-pollen protein as a source of natural antioxidant, emulsifier, and carrier in the production, stabilization, and encapsulation of oxidation-sensitive bioactive components and emulsions.