Optical attosecond pulses and tracking the nonlinear response of bound electrons.

The time it takes a bound electron to respond to the electromagnetic force of light sets a fundamental speed limit on the dynamic control of matter and electromagnetic signal processing. Time-integrated measurements of the nonlinear refractive index of matter indicate that the nonlinear response of bound electrons to optical fields is not instantaneous; however, a complete spectral characterization of the nonlinear susceptibility tensors--which is essential to deduce the temporal response of a medium to arbitrary driving forces using spectral measurements--has not yet been achieved. With the establishment of attosecond chronoscopy, the impulsive response of positive-energy electrons to electromagnetic fields has been explored through ionization of atoms and solids by an extreme-ultraviolet attosecond pulse or by strong near-infrared fields. However, none of the attosecond studies carried out so far have provided direct access to the nonlinear response of bound electrons. Here we demonstrate that intense optical attosecond pulses synthesized in the visible and nearby spectral ranges allow sub-femtosecond control and metrology of bound-electron dynamics. Vacuum ultraviolet spectra emanating from krypton atoms, exposed to intense waveform-controlled optical attosecond pulses, reveal a finite nonlinear response time of bound electrons of up to 115 attoseconds, which is sensitive to and controllable by the super-octave optical field. Our study could enable new spectroscopies of bound electrons in atomic, molecular or lattice potentials of solids, as well as light-based electronics operating on sub-femtosecond timescales and at petahertz rates.

Broadband phase-shifting mirrors for ultrafast lasers.

Metal-dielectric phase-shifting multilayer optical elements have been developed, providing broadband, virtually dispersion-free polarization manipulation down to the few-cycle level. These optical elements are Ag/Al2O3 mirrors that operate in the spectral range from 500 to 100 nm, exhibiting reflectance higher than 95%, and a differential phase shift between the s- and p-polarization of about 90° distributed over four bounces. The mirrors have been designed, produced, and reliably characterized based on spectral photometric and ellipsometric data using a non-parametric approach as well as a multi-oscillator model. The optical elements were implemented into a few-cycle laser system, where they transformed linearly polarized few-cycle light pulses to circular polarization.

10 W CEP-stable few-cycle source at 2 µm with 100 kHz repetition rate.

We developed a high repetition rate optical parametric chirped-pulse amplification (OPCPA) laser system based on fiber-laser-seeded Innoslab to generate few-cycle pulses around 2 µm with passively stable carrier-envelope phase (CEP) by difference frequency generation (DFG). Incorporating a piezo mirror before the DFG stage permits rapid CEP control. The OPCPA system is seeded by a stable supercontinuum generated in bulk material with the picosecond Innoslab pulses. Few-cycle pulses with durations of 17 fs and energies of over 100 µJ were produced in a single OPCPA stage. Three different nonlinear crystals: BBO, BiBO, and LNB were tested in the final parametric amplifier, and their average power related limitations are addressed.

Compact and flexible harmonic generator and three-color synthesizer for femtosecond coherent control and time-resolved studies.

Intense, multi-color laser fields permit the control of the ionization of atoms and the steering of electron dynamics. Here, we present the efficient collinear creation of the second and third harmonic of a 790 nm femtosecond laser followed by a versatile field synthesizer for the three color fields' composition. Using the device, we investigate the strong-field ionization of neon by fields composed of the fundamental, and the second or third harmonic. The three-color device offers sufficient flexibility for the coherent control of strong-field processes and for time-resolved pump-probe studies.

Enhancement cavities for few-cycle pulses.

We address the challenge of increasing the bandwidth of high-finesse femtosecond enhancement cavities and demonstrate a broad spectrum spanning 1800 cm-1 (195 nm) at -10 dB around a central wavelength of 1050 nm in an EC with an average finesse exceeding 300. This will benefit a host of spectroscopic applications, including transient absorption spectroscopy, direct frequency comb spectroscopy, and Raman spectroscopy. The pulse circulating in the EC is composed of only 5.4 optical cycles, at a kilowatt-level average power. Together with a suitable gating technique, this paves the way to the efficient generation of multi-megahertz-repetition-rate isolated extreme ultraviolet attosecond pulses via intracavity high-order harmonic generation.

Carrier frequency tuning of few-cycle light pulses by a broadband attenuating mirror.

We demonstrate the performance of a novel multilayer dielectric reflective thin-film attenuator capable of reshaping the super-octave spectrum of near-single-cycle visible laser pulses without deteriorating the phase properties of the reflected light. These novel broadband attenuating mirrors reshape in a virtually dispersion-free manner the incident spectrum such that the carrier wavelength of the reflected pulses shifts from ∼700 nm (Eγ=1.77 eV) to ∼540 nm (Eγ=2.25 eV) or beyond while maintaining their initial near-single-cycle pulse duration. This constitutes a viable approach to convert a number of established few-cycle ultrafast laser systems into sources with a selectable excitation wavelength to meet the requirements of single-color/multicolor high temporal resolution spectroscopic experiments.

Efficient broadband highly dispersive HfO2/SiO2 multilayer mirror for pulse compression in near ultraviolet.

We report on design, production and implementation of a highly dispersive broadband dielectric multilayer mirror covering near ultraviolet range from 290 nm to 350 nm. The described mirrors, having 92% spectrally averaged reflectance in the ultraviolet range and ∼ 85 fs of group delay difference, that allow compression to ∼ 7 fs, provide a strong foundation for generation of few-fs pulses in the near ultraviolet.

Enhancement cavities for zero-offset-frequency pulse trains.

The optimal enhancement of broadband optical pulses in a passive resonator requires a seeding pulse train with a specific carrier-envelope-offset frequency. Here, we control the phase of the cavity mirrors to tune the offset frequency for which a given comb is optimally enhanced. This enables the enhancement of a zero-offset-frequency train of sub-30-fs pulses to multi-kW average powers. The combination of pulse duration, power, and zero phase slip constitutes a crucial step toward the generation of attosecond pulses at multi-10-MHz repetition rates. In addition, this control affords the enhancement of pulses generated by difference-frequency mixing, e.g., for mid-infrared spectroscopy.

Compressing µJ-level pulses from 250 fs to sub-10 fs at 38-MHz repetition rate using two gas-filled hollow-core photonic crystal fiber stages.

Compression of 250-fs, 1-µJ pulses from a KLM Yb:YAG thin-disk oscillator down to 9.1 fs is demonstrated. A kagomé-PCF with a 36-µm core-diameter is used with a pressure gradient from 0 to 40 bar of krypton. Compression to 22 fs is achieved by 1200 fs2 group-delay-dispersion provided by chirped mirrors. By coupling the output into a second kagomé-PCF with a pressure gradient from 0 to 25 bar of argon, octave spanning spectral broadening via the soliton-effect is observed at 18-W average output power. Self-compression to 9.1 fs is measured, with compressibility to 5 fs predicted. Also observed is strong emission in the visible via dispersive wave generation, amounting to 4% of the total output power.

Femtosecond Enhancement Cavities in the Nonlinear Regime.

We combine high-finesse optical resonators and spatial-spectral interferometry to a highly phase-sensitive investigation technique for nonlinear light-matter interactions. We experimentally validate an ab initio model for the nonlinear response of a resonator housing a gas target, permitting the global optimization of intracavity conversion processes like high-order harmonic generation. We predict the feasibility of driving intracavity high-order harmonic generation far beyond intensity limitations observed in state-of-the-art systems by exploiting the intracavity nonlinearity to compress the pulses in time.

Reverse engineering of multilayer coatings for ultrafast laser applications.

We propose a reliable reverse engineering approach for a postproduction characterization of complicated optical coatings for ultrafast laser applications. We perform the postproduction characterization on the basis of in situ broadband monitoring data and validate the results using ex situ transmittance data and group delay measurements.

Reliable optical characterization of e-beam evaporated TiO2 films deposited at different substrate temperatures.

We studied e-beam evaporated TiO2 films deposited at two different substrate temperatures between 120°C and 300°C. We reliably characterized the film samples on the basis of in situ and ex situ measurements. We carried out annealing on the samples and studied the induced changes in the properties of the films. The results can be useful for further laser-induced damage threshold investigations.

[The influence of the bupivacaine epidural anesthesia on the rabbit myometrium contractile activity and the functional state of the fetuses in induced labor].

BACKGROUND: The influence of bupivacaine (0.5% - 1 ml) epidural anesthesia (EA) on 15 pregnant rabbit females induced in labor by oxytocin on the 30th day of pregnancy in chronic experiment was conducted. MATERIALS AND METHODS: 26 pregnant rabbit females took part in the investigation. 11 females were included in the control group and 15--to the main group. Both groups retrospectively were divided in two on the fact of the delivery during the experiment. For each 5-minute interval the contractile activity of the myometrium (number of uterine contractions, duration and amplitude of the one uterine contraction), functional state of fetuses and female (ECG) were evaluated. Registration of the parameters was carried out simultaneously with the help of electrodes which were administrated in the myometrium, to the fetuses and females on the 28th day of pregnancy. RESULTS: It was shown that EA influence on the myometrium contractile activity and functional state of fetuses and female depends on the female delivery readiness. CONCLUSION: In the case of the optimal one short-term increase of the contractile activity (on the 15th minute after EA) with no significant fetal heart rate changes were observed. In the case of its absence no significant influence was revealed. Moderate female tachycardia in both groups under EA was registered more pronounced in delivery one group.

Empirical study of the group delay dispersion achievable with multilayer mirrors.

With the help of the most advanced algorithms we obtained many dozens of multilayer dispersive mirror designs to empirically find limits for the maximum achievable negative value of the group delay dispersion (GDD). This value depends on the total thickness of coatings and layer material combination. Nb(2)O(5)/SiO(2) and Ta(2)O(50/SiO(2) combinations are studied in detail, for combinations HfO(2)/SiO(2) and TiO(2)/SiO(2) we obtained estimations for two bandwidths. We also show that reasonable values of third-order dispersion have no significant impact on the obtained results. Current state-of-the-art technology allows to produce designs with total physical thicknesses slightly higher than 10 µm and to achieve maximum negative GDD values corresponding to this total design thickness. Designs with total physical thickness of 15 µm and 20 µm are not realized yet due to high sensitivity to deposition errors.

Measurements of the group delay and the group delay dispersion with resonance scanning interferometer.

We developed a method for group delay and group delay dispersion measurements, based on location of interference resonance peaks. Such resonance peaks can be observed in transmittance or in reflectance when two mirrors are placed parallel to each other and separated by a thin air spacer. By using a novel approach, based on simultaneous processing of the data acquired for different spacer distances we obtained reliable results with high resolution. Measurements were performed both in transmittance and reflectance layouts depending on the reflectivity of the mirror to be measured. The developed method allows dispersion measurements of ultraviolet mirrors and ultra-broadband mirrors spanning more than one optical octave to be performed.

[The influence of the bupivacaine regional anesthesia on the contractile activity of the uterus and the functional state of the fetus].

The study in chronic experiment on 26 pregnant rabbit females induced in labor by oxytocin on the 30th day ofpregnancy was conducted. The effects of bupivacaine (0,5% - I ml) epidural anesthesia (EA) on the contractile activity of the uterus, the functional state of the females and their fetuses were studied. On the 28th day of pregnancy under thiopental anesthesia electrodes were administered: to thefetus - ECG, in the female myometrium for recording electrical activity. In order to check the uterus mechanical activity the original sensor was used filled by graphite, which was placed around one horn of the uterus. The contractile activity of the myometrium was evaluatedfor each 5-minute interval by the number ofuterine contractions, duration and amplitude of one uterine contraction. The functional state offemale fetuses and rabbit female were evaluated by the frequency change of the heart rate. In 12 females occured to delivery. Registration of uterine contractions, heart rate of the female and fetuses were carried out simultaneously and continuously throughout the whole experiment. It was shown that under standard conditions EA didn't induce changes in uterine activity parameters of the female located in its natural position, and didn't affect on the fetal heart rate (3-factor analysis of variance - ANOVA). 10minutes after EA, the momentary acceleration of female heart rate (9%) was recorded in relation to the reference level, which may be associated with transient hypotension. Thus, in conditions of our experience the bupivacaine (0,5% - 1,0 ml) EA in induced labor of female rabbit has no significant effect on the uterus contractile activity and the functional state of the fetus. Short-term adaptive tachycardia is registered in females.

High-dispersive mirrors for high power applications.

We report on the development and manufacturing of two different types of high-dispersive mirrors (HDM). One of them provides a record value for the group delay dispersion (GDD) of -4000 fs2 and covers the wavelength range of 1027-1033 nm, whereas the other one provides -3000 fs2 over the wavelength range of 1020-1040 nm. Both of the fabricated mirrors exhibit a reflectance of >99.9% and are well suited for intracavity applications. Mirrors of the second type have been successfully employed in a Kerr-lens mode-locked Yb:YAG thin-disk oscillator for the generation of 200-fs pulses with multi-10-W average power.

High-power Kerr-lens mode-locked Yb:YAG thin-disk oscillator in the positive dispersion regime.

We demonstrate a self-starting Kerr-lens mode-locked (KLM) Yb:YAG thin-disk oscillator operating in the regime of positive intracavity group-delay dispersion (GDD). It delivers 1.7 ps pulses at an average power of 17 W and a repetition rate of 40 MHz. Dispersive mirrors compress the pulses to a duration of 190 fs (assuming sech2 shape; Fourier limit: 150 fs) at an average power level of 11 W. To our knowledge, this is the first KLM thin-disk oscillator with positive GDD. Output powers of up to 30 W were achieved with an increased output coupler transmission and intracavity GDD. We demonstrate increase of the pulse energy with increasing positive intracavity GDD, limited by difficulties in initiating mode-locking.

Robust synthesis of dispersive mirrors.

A synthesis technique allowing to obtain a set of robust designs is reported. The robust synthesis is based on simultaneous optimization of spectral characteristics of multiple designs located in a small neighborhood of a so-called pivotal design. Efficiency of this technique is demonstrated by the synthesis and successful experimental realization of a high dispersive mirror. The fabricated dispersive mirror covers 690-890 nm wavelength range and provides the dispersion of -300 fs2 at 800 nm.

16 fs, 350 nJ pulses at 5 MHz repetition rate delivered by chirped pulse compression in fibers.

We demonstrate a simple approach for broadening and compression of intense pulses at megahertz repetition rates by self-phase modulation in nonlinear photonic crystal fibers. In order to avoid damage by self-focusing, we positively chirp the input pulses, which allows coupling of significantly more energy into the fiber, while maintaining the same spectral bandwidth and compression as compared to the Fourier-limited case at lower energy. Using a commercial long-cavity Ti:sapphire oscillator with 55 fs, 400 nJ pulses at 5 MHz, we generate 16 fs, 350 nJ pulses, which is a factor of 4 more energy than possible with unchirped input pulses. Self-phase-modulated spectra supporting 11 fs duration are also shown with 350 nJ pulse energy. Excellent stability is recorded over at least 1 h.