Structural Evolution of Manganese Prussian Blue Analogue in Aqueous ZnSO4 Electrolyte.

Among different Prussian Blue Analogues (PBAs), manganese hexacyanoferrate (MnHCF), with open framework and two abundant electroactive metal sites, exhibits high potential for the grid-scale aqueous rechargeable zinc-ion batteries (ARZIBs) application. Until now, the intercalation mechanism of Zn2+ into MnHCF has not been clearly illustrated. In this work, combining different synchrotron X-ray techniques, the structural and microscopic evolution of MnHCF in 3 m ZnSO4 electrolyte is comprehensively studied, and a thorough understanding of the intercalation/release dynamic, in terms of local and long-range domain, is provided. The elemental distribution and structural information of Fe, Mn, Zn inside MnHCF electrodes is obtained from the X-ray fluorescence (XRF) elemental maps and X-ray absorption spectroscopy (XAS). The in-depth analysis of extended X-ray absorption fine structure (EXAFS) signals confirm that the rearrangement of Mn site, evidencing the cleavage of the Mn─N bond with the formation of a Mn─O bond, in an octahedral environment. The phase transformation of MnHCF takes place exclusively during the 1st cycle, and a mixture of rhombohedral and cubic zinc hexacynoferrate (ZnHCF) phases are formed during the first charge process. Thereafter, the newly formed cubic ZnHCF phase becomes the only stable one, existing in the subsequent cycles and exhibiting excellent electrochemical stability.

High temperature behaviour of Ag-exchanged Y zeolites used for PFAS sequestration from water.

Per- and polyfluorinated alkyl substances (PFAS) are anthropogenic compounds which have recently drawn great attention due to their high biological, chemical and physical stability and lipid/water repelling properties. The present work aims to provide for the first time insights on the thermal behaviour of Ag-exchanged Y zeolite loaded with perfluorooctanoic acid (PFOA, C8HF15O2) and perfluorooctane sulfonate (PFOS, C8HF17O3S) emphasizing the close link between crystal structure and desorption/dehydration processes. Elemental and isotopic abundance of carbon analysis, thermal analysis, and in situ high-temperature synchrotron X-ray powder diffraction were used to evaluate critically if the thermal regeneration affects the initial zeolites structural features. Rietveld refinements revealed that PFAS sites are emptied in the 550-650 °C temperature range, when the thermal degradation of PFOA and PFOS are reached. The crystallinity of the samples is not affected by the adsorption/desorption processes. Upon heating, the removal of both PFAS and coadsorbed water molecules induced a cation migration of the silver ions and changes of initial geometry of the framework. The dimensions of the channels remain comparable to those of the pristine materials thus suggesting the potential re-use of the samples in other adsorption PFAS cycles. Additionally, once regenerated and reloaded Ag-exchanged Y can re-adsorb PFAS in amounts comparable to that adsorbed in the first cycle with clear benefits on the costs of the whole water treatment process.

What's underneath? A non-destructive depth profile of painted stratigraphies by synchrotron grazing incidence X-ray diffraction.

Many works of art are complex systems consisting of a core completed by the overlapping of several painted layers. In this work, we apply an innovative method based on grazing incidence X-ray diffraction (GIXRD) with synchrotron radiation (SR) to investigate polychrome stratigraphies with a completely non-destructive approach. The SR-GIXRD measurements provided direct and unambiguous compositional and stratigraphic information of the crystalline species lying in different layers. The investigations performed on a small fragment sampled from a painted terracotta statue allowed the identification of pigments, fillers, aggregates of the matrix and newly formed decay salts in micrometric-thin paint layers. Furthermore, the great potentiality of this study is the feasibility of depth profile investigations on multi-layered painted samples from cultural heritage objects without resorting to cross sectional analyses. Currently, the method is non-destructive but it can be potentially non-invasive in situations where small moveable artworks can be placed into the measurement chamber of the SR-XRD beamlines. The overall study paves the way to a new scenario of artwork investigations, shedding light on new unexplored approaches for non-destructive studies of cultural heritage objects, their conservation history and their interaction with the environment.

Lu-, Sm-, and Gd-Doped Ceria: A Comparative Approach to Their Structural Properties.

A room temperature structural study has been performed through the whole compositional range of the (Ce1-xLux)O2-x/2 system by synchrotron X-ray diffraction and µ-Raman spectroscopy. Samples were synthesized by thermal treatment in air at 1373 K of coprecipitated mixed oxalates. A CeO2-based solid solution with a fluorite-type structure (F) was found to be stable up to x = 0.4, while at higher Lu content a (F + C) biphasic region was observed, with C being the cubic atomic arrangement typical of sesquioxides of the heaviest rare earths. A comparative approach including also results deriving from other (Ce1-xREx)O2-x/2 systems (RE ≡ Gd and Sm) allowed us to conclude that the compositional extent of the F solid solution is a complex function of RE3+ size and RE compressibility. On this basis, the dependence of ionic conductivity on the RE identity was interpreted as related both to the Ce4+/RE3+ size closeness and to RE compressibility. Ce4+/RE3+ dimensional issues were also revealed to rule the appearance of the hybrid structure observed in the two aforementioned systems, consisting of the intimate intergrowth of C microdomains within the F-based host lattice. Moreover, a more extended definition of F-based solid solution, including also the hybrid structure, is formulated; the latter is meant as a modification of the former, occurring when mainly RE-vacancy aggregates are incorporated into the host lattice in spite of isolated RE ions. By µ-Raman spectroscopy it was possible to demonstrate that the mechanism of oxygen vacancy formation is common to all the systems studied, provided that the structure of the F-based solid solution, also including the hybrid structure, is retained.

Structural features of Sm- and Gd-doped ceria studied by synchrotron X-ray diffraction and µ-Raman spectroscopy.

A structural study of Sm- and Gd-doped ceria was performed with the aim to clarify some unexplained structural features. (Ce1-xREx)O2-x/2 samples (RE ≡ Sm, Gd; x = 0, 0.1, ..., 1) were prepared by coprecipitation of mixed oxalates and subsequent thermal treatment at 1473, 1173, or 1073 K in air; they were then analyzed at room temperature both by synchrotron X-ray diffraction and µ-Raman spectroscopy. Two structural models were adopted to fit the experimental data, namely, a fluoritic one, resembling the CeO2 structure at low RE content, and a hybrid one at higher RE content, intermediate between the CeO2 and the RE2O3 structures. Two main transitions were detected along the compositional range: (a) an RE-dependent transition at the boundary between the fluoritic and the hybrid regions, of a chemical nature; (b) an RE-independent transition within the hybrid region at ∼0.5, having a purely geometrical nature. The presence of two finely interlaced F- and C-based structures within the hybrid region was confirmed, and hints of their composition were obtained by µ-Raman spectroscopy. The obtained results indicate a possible explanation for the non-Vegard behavioral trend of the cell parameters.

In situ reaction furnace for real-time XRD studies.

The new furnace at the Materials Characterization by X-ray Diffraction beamline at Elettra has been designed for powder diffraction measurements at high temperature (up to 1373 K at the present state). Around the measurement region the geometry of the radiative heating element assures a negligible temperature gradient along the capillary and can accommodate either powder samples in capillary or small flat samples. A double capillary holder allows flow-through of gas in the inner sample capillary while the outer one serves as the reaction chamber. The furnace is coupled to a translating curved imaging-plate detector, allowing the collection of diffraction patterns up to 2θ ≃ 130°.

Interfacial Interactions of a Myoglobin/DOPC Hybrid System at the Air-Water Interface and Its Physicochemical Properties.

In the present study, the intermolecular interactions between a water-insoluble phospholipid (DOPC) and water-soluble protein (myoglobin) and the interaction among themselves were investigated at the air-water interface using the Langmuir and Langmuir-Blodgett techniques. The effects of changes in physicochemical factors, like pH and temperature, on these interactions were also examined. Surface pressure-molecular area (π-A) isotherms of the DOPC monolayer at the air-water interface, with and without myoglobin (Myo) revealed the evolution of various physical properties, such as elastic, thermodynamic, and hysteric properties, in response to changes in subphase pH and temperature. With the increment of subphase pH from 5 to 7 at a fixed temperature (20 °C), the DOPC isotherm expanded, and the in-plane elasticity (CS-1) decreased, but no significant presence of hysteresis was encountered in either of the pH values. On the other hand, a diminution of temperature (from 20 to 5 °C) leads to an expansion of monolayers yielding low elasticity and significant hysteresis. The incorporation of Myo molecules within the DOPC monolayer decreased the CS-1 value of the DOPC monolayer. Such a decrement in CS-1 was also encountered while increasing the pH and decreasing the temperature (T) of the subphase in the absence of Myo. Systematic expansion of DOPC isotherm and increased hysteric area with the increase in Myo proportion were observed and the atomic force microscopy (AFM) observations suggested a strong conjugation between Myo and DOPC in the mixed monolayer. The denaturation effect of Myo molecules was studied using AFM at different temperatures. Furthermore, the Myo molecules were found to be most surface active at pH = 7, which is very close to its isoelectric point. These observations come up with the interaction mechanism between biomolecules under dynamically varied conditions.

Origin of Mangetotransport Properties in APCVD Deposited Tin Oxide Thin Films.

Transparent conducting oxides (TCO) with high electrical conductivity and at the same time high transparency in the visible spectrum are an important class of materials widely used in many devices requiring a transparent contact such as light-emitting diodes, solar cells and display screens. Since the improvement of electrical conductivity usually leads to degradation of optical transparency, a fine-tuning sample preparation process and a better understanding of the correlation between structural and transport properties is necessary for optimizing the properties of TCO for use in such devices. Here we report a structural and magnetotransport study of tin oxide (SnO2), a well-known and commonly used TCO, prepared by a simple and relatively cheap Atmospheric Pressure Chemical Vapour Deposition (APCVD) method in the form of thin films deposited on soda-lime glass substrates. The thin films were deposited at two different temperatures (which were previously found to be close to optimum for our setup), 590 °C and 610 °C, and with (doped) or without (undoped) the addition of fluorine dopants. Scanning Electron Microscopy (SEM) and Grazing Incidence X-ray Diffraction (GIXRD) revealed the presence of inhomogeneity in the samples, on a bigger scale in form of grains (80-200 nm), and on a smaller scale in form of crystallites (10-25 nm). Charge carrier density and mobility extracted from DC resistivity and Hall effect measurements were in the ranges 1-3 × 1020 cm-3 and 10-20 cm2/Vs, which are typical values for SnO2 films, and show a negligible temperature dependence from room temperature down to -269 °C. Such behaviour is ascribed to grain boundary scattering, with the interior of the grains degenerately doped (i.e., the Fermi level is situated well above the conduction band minimum) and with negligible electrostatic barriers at the grain boundaries (due to high dopant concentration). The observed difference for factor 2 in mobility among the thin-film SnO2 samples most likely arises due to the difference in the preferred orientation of crystallites (texture coefficient).

In-Operando Diffraction and Spectroscopic Evaluation of Pure, Zr-, and Ce-Doped Vanadium Dioxide Thermochromic Films Derived via Glycolate Synthesis.

Pure and doped vanadia (VO2, V0.98Zr0.02O2, V0.98Ce0.02O2) samples were prepared by wet chemistry synthesis from vanadyl glycolate intermediate phase and tape casted into films. Combining in-operando grazing incidence synchrotron X-ray diffraction and Raman spectroscopy, we studied the structural evolution of the films under isothermal conditions. The setup allowed assessment of the thermochromic functionality with continuous monitoring of the monoclinic to tetragonal transition in pure and doped vanadia phases, responsible for the transmission and reflection of light in the infrared part of the solar spectrum. The materials characterisation by X-ray diffraction beamline (MCX) goniometer demonstrated ideal performance, combining flexible geometry, high resolution, and the potential to accommodate the multi-channel equipment for in-operando characterisation. This method proved viable for evaluating the relevant structural and physical, and thereof functional properties of these systems. We revealed that dopants reduce the transition temperature by 5 °C on average. The synthetic route of the films was held responsible for the observed phase separation. The more favourable behaviour of cerium-doped sample was attributed to cerium alkoxide behaviour. In addition, structural, microstructural, thermal, and spectroscopic characterisation on powder samples was performed to gain more insight into the development of the phases that are responsible for thermochromic features in a broader range of doping ratios. The influence of the dopants on the extent of the thermochromic transition (transmission to reflection hysteresis) was also evaluated using (micro) structural, thermal and spectroscopic methods of powder samples. Characterisations showed that zirconium doping in 2, 4, and 6 mol% significantly influenced the phase composition and morphology of the precursor. Vanadium oxides other than VO2 can easily crystallise; however, a thermal treatment regime that allowed crystallisation of VO2 as a single phase was established.

Tuning the growth mode of nanowires via the interaction among seeds, substrates and beam fluxes.

The growth mechanism of semiconductor nanowires is still an argument of high interest, and it is becoming clearer, investigation after investigation, that simple pictures fail to describe the complex behaviors observed under different growth conditions. We report here on the growth of semiconductor nanowires, maintaining control over the chemical composition and the physical state of the metallic seeds, and tuning the growth mechanism by varying the growth conditions. We focused on Au-assisted ZnSe nanowires grown by molecular beam epitaxy on GaAs(111)B substrates. We show that at sufficiently high temperatures, the Au seed is strongly affected by the interaction with the substrate and that nanowire growth can occur through two different mechanisms, which have a strong impact on the nanowire's morphology and crystal quality. In particular, ZnSe NWs may exhibit either a uniformly oriented, straight morphology when the nanoparticle seed is liquid, or a kinked, worm-like shape when the nanoparticle seed is switched to a solid phase. This switch, which tunes the nanowire growth mechanism, is achieved by controlling the Zn-to-Se beam pressure ratio at the Au-seed surface. Our results allow a deeper understanding of particle-assisted nanowire growth, and an accurate control of nanowire morphology via the control of the growth mechanism.