Association between genetic variants in key vitamin-D-pathway genes and external apical root resorption linked to orthodontic treatment.

This study evaluated the association between single-nucleotide polymorphisms (SNPs) in vitamin-D-related genes and the amount of external apical root resorption linked to orthodontic treatment. One hundred and forty-three individuals were assessed. The amount of external apical root resorption of upper central incisors (EARRinc ) and lower first molars (EARRmol ) were evaluated in radiographs. Seven SNPs were genotyped across four genes including the vitamin D receptor [VDR], group-specific component [GC], cytochrome P450 family 27 subfamily B member 1 [CYP27B1], and cytochrome P450 family 24 subfamily A member 1 [CYP24A1]. Linear regressions were implemented to determine allele-effects on external apical root resorption. Individuals carrying the AA genotype in VDR rs2228570 had a 21% higher EARRmol than those having AG and GG genotypes (95% CI: 1.03,1.40). EARRmol in heterozygous rs2228570, was 12% lower than for homozygotes (95%CI: 0.78,0.99). Participants with the CCG haplotype (rs1544410-rs7975232-rs731236) in VDR had an EARRmol 16% lower than those who did not carry this haplotype. Regarding CYP27B1 rs4646536, EARRinc in participants who had at least one G allele was 42% lower than for homozygotes AA (95%CI: 0.37,0.93). Although these results did not remain significant after multiple testing adjustment, potential associations may still be suggested. Further replication studies are needed to confirm or refute these findings.

Three-dimensional localization of impacted teeth using magnetic resonance imaging.

Impacted teeth remain embedded in the jawbone beyond the normal eruption time with completed root growth. They can often get infected or damage neighboring teeth. Information about the three-dimensional position of impacted teeth is invaluable in orthodontic diagnosis and treatment planning. The purpose of this prospective study was to assess the feasibility of using magnetic resonance imaging (MRI) for the three-dimensional localization of impacted teeth in children and adults. The study included 39 patients from the pediatric age group with different tooth impactions and seven adults with impacted wisdom teeth. MRI yielded a clear separation between impacted teeth and the surrounding tissue, and the position and angulation of impacted teeth in all three spatial dimensions could be assessed. Compared to conventional radiography, dental MRI provides the advantage of full volumetric morphology accompanied by complete elimination of ionizing radiation, which is particularly relevant for repeated examinations of the pediatric group.

Cortisol daily rhythm in saliva of healthy school children.

AIM: To investigate the daily rhythm of cortisol levels in saliva of school children. SUBJECTS AND METHODS: Probands (10-14 years, both genders) were recruited via personal contact and school visits. Exclusion criteria included hormonal and dental treatments during the trial, pharmaceuticals containing cortisol, or poor oral hygiene. Each volunteer collected 20 saliva samples during one day at defined times starting immediately after waking up and ending at night. Additionally, they completed a sampling diary. Saliva samples were analysed in duplicate using a commercial cortisol luminescence kit. RESULTS: Cortisol concentration in saliva followed a daily rhythm. Within 20 minutes after waking up cortisol reached the highest level of 9.69 (+/-3.89) nmol/L. After 90 minutes cortisol concentration decreased linearly by 50% and stagnated at 4.14 (+/-1.93) nmol/L for 3 to 8 hours. Thereafter, levels decreased gradually reaching almost zero after 14 hours. Overall, no gender-specific differences in saliva cortisol levels were observed except for 3 time points: 3, 10 and 11 hours after waking. CONCLUSION: This study establishes guidelines for a normal secretion pattern, plus explores pain level measurements and their correlation to saliva cortisol levels in this age group.

Conventionally ligated versus self-ligating metal brackets--a comparative study.

The purpose of this study was to compare the frictional properties of four self-ligating metal brackets, Speed, Damon 2, In-Ovation, and Time, with those of three conventionally ligated metal brackets, Time, Victory Twin, and Discovery. The self-ligating Time bracket can also be used as a conventionally ligated bracket. Friction was tested 20 times for each bracket/wire combination using a Zwick testing machine with stainless steel wires in three different wire dimensions (0.017 x 0.025, 0.018 x 0.025, and 0.019 x 0.025 inches). All brackets had a 0.022 inch slot and the prescription of an upper first premolar. The data were statistically analysed with unsigned comparisons of all bracket/wire combinations using the Mann-Whitney U-test and the Games-Howell post hoc test. The results showed almost all brackets to have the lowest frictional force with a wire dimension of 0.018 x 0.025 inch. Friction of the self-ligating brackets using wire with a dimension of 0.018 x 0.025 inches was 45-48 per cent lower than with 0.017 x 0.025 and 0.019 x 0.025 inch wires. Friction of the conventionally ligated brackets showed a 14 per cent or less reduced friction with 0.018 x 0.025 inch wire compared with 0.017 x 0.025 and 0.019 x 0.025 inch wires. The self-ligating metal brackets showed lower frictional forces with a 0.018 x 0.025 inch wire than conventionally ligated brackets, whereas conventionally ligated brackets showed lower friction with 0.017 x 0.025 and 0.019 x 0.025 inch wire. Friction values vary with different bracket/archwire combinations and, therefore, the choice of a bracket system for treatment should consider the correct wire dimension to produce the lowest possible frictional forces.

Ritually induced growth disturbances and deformities of the orofacial system--a contribution to cranial morphogenesis.

Numerous ritual acts involving the skull result in orofacial changes. The present study focuses on ritual acts of Brazilian Zoé Indians. A distinct deformation effect of the ritual act (wearing a lip-plug) on the morphology of the orofacial system is demonstrated and documented using jaw models. The studies show that the lip-plug significantly influences tooth position and jaw growth. While the maxilla displays palatal displacement of the lateral incisors and elevation of the palate, retraction occurs in the mandible depending upon plug size. Additionally, both the plug and the nutritional habits of the Indians induce marked abrasion of all teeth. Moreover, it is shown that the duration of lip-plug wear is an essential determinant of sustained orofacial changes.

The in vitro viability and growth of fibroblasts cultured in the presence of different bone grafting materials (NanoBone and Straumann Bone Ceramic).

Different clinical applications, including dentistry, are making increasing demands on bone grafting material. In the present study we have analysed the viability, proliferation and growth characteristics of fibroblasts cultured in vitro together with two different bone grafting materials, NanoBone and Straumann Bone Ceramic, over a period of 24 and 28 days respectively. Viability was measured at least every 72 hours by using the alamarBlue assay, a test that measures quantitatively cell proliferation and viability but does not require cell fixation or extraction. After one week of culture fibroblast viability was as high as in controls for both grafting materials and remained high (> 90%) for the duration of the experiment. Cell growth was evaluated microscopically. Scanning electron microscopy revealed a dense fibroblast growth at the surface of both bone grafting materials after three weeks of in vitro culture. Generally, our in vitro analyses contribute to further insights into cell - scaffold interactions.

The morphological and clinical relevance of mandibular and maxillary bone structures for implantation.

Tooth loss, which interrupts the biocybernetic feedback circuit of the masticatory system, changes the structures of the jaw bone: such changes are termed "inactivity atrophy". The mandible is subject to vertical atrophy and the maxilla is primarily subject to horizontal atrophy. The mandible possesses more compact bone, the maxilla more spongy; the resorption directions also differ (mandible: towards the oral aspect; maxilla: towards the vestibular). An implant helps to restore the biocybernetic feedback system. The amount of available bone, bone structure, and topographic conditions are crucial factors influencing implant success. Osseointegration is performed at an early stage (which includes bleeding, granulation tissue, foreign-body recognition, interactions) and at a late stage (so-called osseous bridging, development of fibrous and lamellar bone).

The ultrastructure and processing properties of Straumann Bone Ceramic and NanoBone.

The ultrastructure, fundamental chemistry, and processing modes of fully synthetic bone grafting materials are relevant to the reconstruction of osseous defects. Rapid progress in the profitable market of biomaterials has led to the development of various bone substitutes. Despite all these efforts, an ideal and full substitute of autologous bone is not yet in sight. With regard to anorganic calcium phosphate ceramics, Straumann Bone Ceramic and NanoBone are compared. These have a similar composition and are osteoconductive, which indispensably requires contact with well-vascularised bone.

Bone graft substitutes in periodontal and peri-implant bone regeneration.

Regenerative medicine provides different therapy alternatives alongside gold standard autogenous grafts for the treatment of periodontal or peri-implant osseous defects. Continuing progress in the field of alloplastic bone substitutes has yielded promising solutions to the appropriate indications with the membrane technique either alone or in combination with enamel matrix derivatives. Their clinical outcomes, however, still require critical discussion.

Histological and fluorescence microscopic examination of the bone/implant interface in orthodontic miniscrews (Mondeal).

The temporary nature of orthodontic implants demands optimisation of size and design in order to minimise damage and risk to the patient. Slender and shorter miniscrews offer the advantage over conventional implants of easier and more ubiquitous positioning with minimised risk of injury to neighbouring anatomical structures such as tooth roots, nerves or vessels. The question is raised, however, as to what extent these advantages are gained at the price of diminished stability or a more unfavourable bone interface. In order to evaluate the screw/bone interface, 14 orthodontic miniscrews (Mondeal Medical Systems, diameter: 1.5 mm, length: 9 mm) were inserted into the right and left mandibles of 7 pigs (Sus scrofa domestica). Bone fluorochromes were administered in a defined order for polychrome sequencing. The samples gathered after 70 days were analysed using histological techniques and fluorescence microscopy. The lower part of the self-tapping thread displayed undisturbed bone apposition. Fluorescence microscopy revealed remodelling and bone apposition within the thread grooves.

The use of ceramic drills on a zirconium oxide basis in bone preparation.

The favourable mechanical properties and high biocompatibility of the newly developed mixed ceramics composed of zirconium oxide and aluminium oxide have continuously extended the scope of their application. Rotating instruments on a zirconium oxide basis are regarded as superior to metal burs in dentoalveolar surgery in terms of favourable temperature effects on the surrounding bone tissue and the economic advantage that they wear slowly, enabling them to be used repeatedly. In this study ten round burs made of zirconium oxide and aluminium oxide mixed ceramics were used for typical dental-alveolar preparation types on an explanted pig jaw. Prior to the first and following the tenth application a scanning electron microscopic (SEM) analysis of possible wear signs was conducted. However, this revealed no evidence of wear or resulting loss of sharpness.

Bacterial colonisation of interior implant threads with and without sealing.

Premature loss of dental implants is due, apart from mechanical factors, to germrelated inflammation. Gaps and hollow spaces within the implant system, for example the gap between implant and abutment in the two-part implant system, may provide a bacterial reservoir causing or maintaining inflammation. The bacterial spectrum involved is similar to that found in periodontitis. This in vitro study aimed to scrutinise the capability of Porphyromonas gingivalis (DSM 20709), the bacterium blamed for inducing peri-implantitis, to pass the implant/abutment gap in titanium implant systems used for orthodontic anchorage and to remain vital in the interior. Additionally, the in vitro effectiveness of gutta percha for gap sealing was examined. Twelve titanium implants (Straumann, diameter: 3.3 mm, length 5.5 mm) were provided with abutments at a defined torque (20 Ncm), six of which were sealed with gutta percha before screwing in the abutment. Subsequently the implants were placed in a nutrient solution (thioglycolate boullion with haemin-menadione solution) that contained Porphyromonas gingivalis. Microbiological specimens were sampled from the implant interiors after 24 and 72 hours and analysed using culture methods. There was evidence that penetration of the periodontal pathogen Porphyromonas gingivalis to the implant interior may occur as early as after 24 hours. Microbes were also detected in the interior of implants sealed with gutta percha. The abutment/implant interface in vitro provides a microbiological leakage for the prospective peri-implantitis-inducing bacterium Porphyromonas gingivalis. Survival of the bacterium is possible in the interior, so that development of a bacterial reservoir is assumed. This in vitro trial produced no evidence that sealing with gutta percha is an effective means to prevent secondary bacterial colonisation in the implant interior.

The application of bone graft substitutes for alveolar ridge preservation after orthodontic extractions and for augmentation of residual cleft defects.

The use of bone substitute materials in orthodontics is to be considered prior to orthodontic space closure after tooth extraction during the treatment of marked crowding as well as for treatment of residual defects in cleft-lip-and-palate children. In both cases the common objective is structure preservation or augmentation of the alveolar ridge. The demands to be made on the synthetic bone graft substitute comprise not just complication-free and safe use but also the chance of early tooth movement into the treated defect area with sufficient stability of the new tooth position.

Requirements and infection prophylaxis for internally cooled implant drills.

Implant site preparation is crucially important to long-term success. Heat generation during drilling is unfavourable, since bone is relatively susceptible to heat, depending on its vascularisation and microstructure. Numerous factors such as drilling pressure, number of revolutions, drill design, wear and material, drilling depth and cooling influence heat generation. Internally cooled drills are, therefore, increasingly used, even though the improved cooling effect compared to conventional externally cooled drills is controversial. Internally cooled drills may have the disadvantage of a germ reservoir developing in the cooling channel. This study aimed to examine the effects of disinfection and sterilisation of internally cooled drills. After contamination of the cooling channel with suitable bioindicators (Enterococcus faecium, ATCC 6057 and spores of Bacillus stearothermophilus, ATCC 7953), the drills were disinfected (disinfection solution ID 220, Dürr Dental) and autoclaved (Webeco, E5S90, 134 degrees C, 2.6 bar, 5 min). Disinfection was not completely effective except after pre-cleaning. By means of sterilisation all spores of Bacillus stearothermophilus were completely killed. Internally cooled drills can be successfully disinfected by means of this hygienic procedure routinely used in dental practice and no source of infection is created.

The biodegradation of hydroxyapatite bone graft substitutes in vivo.

Hydroxyapatite (HA) ceramics are widely used for bone reconstruction. They are osteoconductive and serve as structural scaffolds for the deposition of new bone. Generally, scaffold materials should be degradable as they affect the mechanical properties of the reconstructed bone negatively. Degradation by osteoclasts during the bone remodelling process is desirable but often does not take place. In the current study we analysed by light microscopy the degradation of two granular HA implants in critically sized defects in the mandibula of Goettingen mini-pigs five weeks after implantation. Bio-Oss consists of sintered bovine bone and NanoBone is a synthetic HA produced in a sol-gel process in the presence of SiO2. We found that both biomaterials were degraded by osteoclasts with ruffled borders and acid phosphatase activity. The osteoclasts created resorption lacunae and resorptive trails and contained mineral particles. Frequently, resorption surfaces were in direct contact with bone formative surfaces on one granule. Granules, especially of NanoBone, were also covered by osteoclasts if located in vascularised connective tissue distant from bone tissue. However, this usually occurred without the creation of resorption lacunae. The former defect margins consisted of newly formed bone often without remnants of bone substitutes. Our results show that the degradation of both biomaterials corresponds to the natural bone degradation processes and suggest the possibility of complete resorption during bone remodelling.

The manufacture of synthetic non-sintered and degradable bone grafting substitutes.

A new synthetic bone grafting substitute (NanoBone, ARTOSS GmbH, Germany) is presented. This is produced by a new technique, the sol-gel-method. This bone grafting substitute consists of nanocrystalline hydroxyapatite (HA) and nanostructured silica (SiO2). By achieving a highly porous structure good osteoconductivity can be seen. In addition, the material will be completely biodegraded and new own bone is formed. It has been demonstrated that NanoBone is biodegraded by osteoclasts in a manner comparable to the natural bone remodelling process.

Bone functions and the requirements for bone grafts and substitutes in the orofacial region.

Bone is the largest calcium storage, has distinctive plasticity and adaptability and is part of the supporting tissue. An adequate composition is thus necessary. The bone matrix consists of organic and anorganic structures. Osteoblasts, osteoclasts and osteocytes are responsible for bone formation, resorption and metabolism. The periosteum, endosteum and bone tissue are a functional unit and provide protection, nutrition and growth. Bone is subject to continuous remodelling.

The survival and proliferation of fibroblasts on orthodontic miniscrews with different surface treatment: an in vitro study.

It is of fundamental importance for prosthodontic and orthodontic applications that there is a short osseointegration time of dental implants without inflammation of the surrounding tissue. In addition to the chemical properties of the implant material, the surface morphology is an equally critical parameter. The objective of this work was to study the effect of two simple surface treatments on the survival and proliferation of fibroblasts. Three groups of orthodontic miniscrews (Mondeal) were used. One group was given an airflow (EMS, Schweiz) treatment, the second was sand-blasted in the area of the threading and a third group served as a control. After preparation sterilised screws were cultured in vitro with fibroblasts (L-929). The metabolic cell activity on the implant surface was determined after 24, 48 and 120 hours using the alamarBlue assay and a count of DAPI labelled fibroblasts was performed with a fluorescence microscope. After 24 hours, but not at 48 hours and 120 hours, the metabolic activity of the fibroblasts was slightly decreased for the airflow screw group. Generally, no significant difference was found regarding metabolic activity and proliferation of fibroblasts within the different groups.

The clinical application of a new synthetic bone grafting material in oral and maxillofacial surgery.

A novel bone formation material based on hydroxyapatite-xerogel is presented. With the use of the innovative sol-gel technology this material is produced in the low-temperature range by the addition of silicon dioxide; in its structure it mimics to a great extent the natural bone matrix. This results in high osteoconductivity and an osteoprotective effect as well as in complete biodegradation corresponding to bone formation in the course of natural bone remodelling. Two case reports are presented.

Wound management after the application of bone grafting substitutes in the orofacial region.

Surgical dressing after the application of bone grafting material depends on the type and size of the defect. A complete and tension-free wound closure has proved to be successful. In this context the infection problem needs special attention. Bone graft substitutes with an adequate surface structure, porosity and chemical properties, in combination with sufficient blood circulation, hold osteoconductive potential. They serve as a guide rail for the osteoblast-induced formation of new bone tissue, which at best may lead to complete replacement of the grafting material.