Linker-Functionalized Phosphinate Metal-Organic Frameworks: Adsorbents for the Removal of Emerging Pollutants.

Metal-organic frameworks (MOFs) are attracting increasing attention as adsorbents of contaminants of emerging concern that are difficult to remove by conventional processes. This paper examines how functional groups covering the pore walls of phosphinate-based MOFs affect the adsorption of specific pharmaceutical pollutants (diclofenac, cephalexin, and sulfamethoxazole) and their hydrolytic stability. New structures, isoreticular to the phosphinate MOF ICR-7, are presented. The phenyl ring facing the pore wall of the presented MOFs is modified with dimethylamino groups (ICR-8) and ethyl carboxylate groups (ICR-14). These functionalized MOFs were obtained from two newly synthesized phosphinate linkers containing the respective functional groups. The presence of additional functional groups resulted in higher affinity toward the tested pollutants compared to ICR-7 or activated carbon. However, this modification also comes with a reduced adsorption capacity. Importantly, the introduction of the functional groups enhanced the hydrolytic stability of the MOFs.

Exploring the Isoreticular Continuum between Phosphonate- and Phosphinate-Based Metal-Organic Frameworks.

The rational design of metal-organic frameworks (MOFs) is one of the driving forces behind the great success that this class of materials is experiencing. The so-called isoreticular approach is a key design tool, very often used to tune the size, steric properties, and additional functional groups of the linker used. In this work, we go one step further and show that even linkers with two different coordinating groups, namely, phosphonate and phosphinate, can form isoreticular MOFs. This effectively bridges the gap between MOFs utilizing phosphinate and phosphonate coordinating groups. Using a novel bifunctional ligand, 4-[hydroxy(methyl)phosphoryl]phenylphosphonic acid [H3PPP(Me)], we were able to prepare ICR-12, a MOF isoreticular to already published MOFs containing bisphosphinate linkers (e.g., ICR-4). An isostructural MOF ICR-13 was also successfully prepared using 1,4-benzenediphosphonic acid. We envisage that this strategy can be used to further enlarge the pool of MOFs.

Phosphinate MOFs Formed from Tetratopic Ligands as Proton-Conductive Materials.

Metal-organic frameworks (MOFs) are attracting attention as potential proton conductors. There are two main advantages of MOFs in this application: the possibility of rational design and tuning of the properties and clear conduction pathways given by their crystalline structure. We hereby present two new MOF structures, ICR-10 and ICR-11, based on tetratopic phosphinate ligands. The structures of both MOFs were determined by 3D electron diffraction. They both crystallize in the P3̅ space group and contain arrays of parallel linear pores lined with hydrophilic noncoordinated phosphinate groups. This, together with the adsorbed water molecules, facilitates proton transfer via the Grotthuss mechanism, leading to a proton conductivity of up to 4.26 × 10-4 S cm-1 for ICR-11. The presented study demonstrates the high potential of phosphinate MOFs for the fabrication of proton conductors.

Anisotropy, segmental dynamics and polymorphism of crystalline biogenic carboxylic acids.

Carboxylic acids of the Krebs cycle possess invaluable biochemical significance. Still, there are severe gaps in the availability of thermodynamic and crystallographic data, as well as ambiguities prevailing in the literature on the thermodynamic characterization and polymorph ranking. Providing an unambiguous description of the structure, thermodynamics and polymorphism of their neat crystalline phases requires a complex multidisciplinary approach. This work presents results of an extensive investigation of the structural anisotropy of the thermal expansion and local dynamics within these crystals, obtained from a beneficial cooperation of NMR crystallography and ab initio calculations of non-covalent interactions. The observed structural anisotropy and spin-lattice relaxation times are traced to large spatial variations in the strength of molecular interactions in the crystal lattice, especially in the orientation of the hydrogen bonds. A completely resolved crystal structure for oxaloacetic acid is reported for the first time. Thanks to multi-instrumental calorimetric effort, this work clarifies phase behavior, determines third-law entropies of the crystals, and states definitive polymorph ranking for succinic and fumaric acids. These thermodynamic observations are then interpreted in terms of first-principles quasi-harmonic calculations of cohesive properties. A sophisticated model capturing electronic, thermal, and configurational-entropic effects on the crystal structure approaches captures the subtle Gibbs energy differences governing polymorph ranking for succinic and fumaric acids, representing another success story of computational chemistry.

Reconstructing Reliable Powder Patterns from Spikelets (Q)CPMG NMR Spectra: Simplification of UWNMR Crystallography Analysis.

Spikelets NMR spectra are very popular as they enable the shortening of experimental time and give the possibility to obtain required NMR parameters for nuclei with ultrawide NMR patterns. Unfortunately, these resulted ssNMR spectra cannot be fitted directly in common software. For this reason, we developed UWNMRSpectralShape (USS) software which transforms spikelets NMR patterns into single continuous lines. Subsequently, these reconstructed spectral envelopes of the (Q)CPMG spikelets patterns can be loaded into common NMR software and automatically fitted, independently of experimental settings. This allows the quadrupole and chemical shift parameters to be accurately determined. Moreover, it makes fitting of spikelets NMR spectra exact, fast and straightforward.

Robust Aluminum and Iron Phosphinate Metal-Organic Frameworks for Efficient Removal of Bisphenol A.

Porous metal-organic frameworks (MOFs) have excellent characteristics for the adsorptive removal of environmental pollutants. Herein, we introduce a new series of highly stable MOFs constructed using Fe3+ and Al3+ metal ions and bisphosphinate linkers. The isoreticular design leads to ICR-2, ICR-6, and ICR-7 MOFs with a honeycomb arrangement of linear pores, surface areas up to 1360 m2 g-1, and high solvothermal stabilities. In most cases, their sorption capacity is retained even after 24 h of reflux in water. The choice of the linkers allows for fine-tuning of the pore sizes and the chemical nature of the pores. This feature can be utilized for the optimization of host-guest interactions between molecules and the pore walls. Water pollution by various endocrine disrupting chemicals has been considered a global threat to public health. In this work, we prove that the chemical stability and hydrophobic nature of the synthesized series of MOFs result in the remarkable sorption properties of these materials for endocrine disruptor bisphenol A.

Gallium Species Incorporated into MOF Structure: Insight into the Formation of a 3D Polycrystalline Gallium-Imidazole Framework.

The formation of a polycrystalline 3D gallium-imidazole framework (MOF) was closely studied in three steps using ssNMR, XRPD, and TGA. In all steps, the reaction products show relatively high temperature stability up to 500 °C. The final product was examined by structural analysis using NMR crystallography combined with TG and BET analyses, which enabled a detailed characterization of the polycrystalline MOF system on the atomic-resolution level. 71Ga ssNMR spectra provided valuable structural information on the coexistence of several distinct gallium species, including a tunable liquid phase. Moreover, using an NMR crystallography approach, two structurally asymmetric units of Ga(Im6)6- incorporated into the thermally stable polycrystalline 3D matrix were identified. Prepared polycrystalline MOF material with polymorphic gallium species is promising for use in catalytic processes.

The Nature of Chemical Bonding in Lewis Adducts as Reflected by 27Al NMR Quadrupolar Coupling Constant: Combined Solid-State NMR and Quantum Chemical Approach.

Lewis acids and Lewis adducts are widely used in the chemical industry because of their high catalytic activity. Their precise geometrical description and understanding of their electronic structure are a crucial step for targeted synthesis and specific use. Herein, we present an experimental/computational strategy based on a solid-state NMR crystallographic approach allowing for detailed structural characterization of a wide range of organoaluminum compounds considerably differing in their chemical constitution. In particular, we focus on the precise measurement and subsequent quantum-chemical analysis of many different 27Al NMR resonances in the extremely broad range of quadrupolar coupling constants from 1 to 50 MHz. In this regard, we have optimized an experimental strategy combining a range of static as well as magic angle spinning experiments allowing reliable detection of the entire set of aluminum sites present in trimesitylaluminum (AlMes3) reaction products. In this way, we have spectroscopically resolved six different products in the resulting polycrystalline mixture. All 27Al NMR resonances are precisely recorded and comprehensively analyzed by a quantum-chemical approach. Interestingly, in some cases the recorded 27Al solid-state NMR spectra show unexpected quadrupolar coupling constant values reaching up to ca. 30 MHz, which are attributed to tetra-coordinated aluminum species (Lewis adducts with trigonal pyramidal geometry). The cause of this unusual behavior is explored by analyzing the natural bond orbitals and complexation energies. The linear correlation between the quadrupolar coupling constant value and the nature of bonds in the Lewis adducts is revealed. Moreover, the 27Al NMR data are shown to be sensitive to the geometry of the tetra-coordinated organoaluminum species. Our findings thus provide a viable approach for the direct identification of Lewis acids and Lewis adducts, not only in the investigated multicomponent organoaluminum compounds but also in inorganic zeolites featuring catalytically active trigonal (AlIII) and strongly perturbed AlIV sites.

Phosphinic Acid Based Linkers: Building Blocks in Metal-Organic Framework Chemistry.

Metal-organic frameworks (MOFs) are a chemically and topologically diverse family of materials composed of inorganic nodes and organic linkers bound together by coordination bonds. Presented here are two significant innovations in this field. The first is the use of a new coordination group, phenylene-1,4-bis(methylphosphinic acid) (PBPA), a phosphinic acid analogue of the commonly used terephtalic acid. Use of this new linker group leads to the formation of a hydrothermally stable and permanently porous MOF structure. The second innovation is the application of electron-diffraction tomography, coupled with dynamic refinement of the EDT data, to the elucidation of the structure of the new material, including the localization of hydrogen atoms.

Unexpected Crystallization Patterns of Zinc Boron Imidazolate Framework ZBIF-1: NMR Crystallography of Integrated Metal-Organic Frameworks.

Framework materials, that is, metal-organic frameworks (MOFs) and inorganic frameworks (zeolites), are porous systems with regular structures that provide valuable properties suitable for sorption, catalysis, molecular sieving, and so on. Herein, an efficient, experimental/computational strategy is presented that allows detailed characterization of a polycrystalline MOF system, namely, zinc boron imidazolate framework ZBIF-1, with two integrated unit cells on the atomic-resolution level. Although high-resolution 1 H, 11 B, 13 C, and 15 N MAS NMR spectra provide valuable structural information on the coexistence of two distinct asymmetric units in the investigated system, an NMR crystallography approach combining X-ray powder diffraction, solid-state NMR spectroscopy, and DFT calculations allowed the exact structure of the secondary crystalline phase to be firmly defined and, furthermore, the mutual interconnectivity of the two crystalline frameworks to be resolved. Thus, this study shows the versatility and efficiency of solid-state NMR crystallography for the investigation of the wide family of MOF materials with their extensive structural complexity.

Ho3+ codoping of GGAG:Ce: a detailed analysis of acceleration of scintillation response and scintillation efficiency loss.

In this study, we investigate the effects of Ho3+ codoping on the luminescence and scintillation properties of GGAG:Ce, with a particular focus on timing properties and scintillator efficiency. The research reveals that Ho3+ codoping and subsequent resonant energy transfer from Ce3+ to Ho3+ can significantly reduce the 5d1 excited state decay time of Ce3+ and shorten scintillation pulses of GGAG:Ce registered by using photomultipliers, although this reduces scintillator efficiency as well. The study presents a detailed analysis of the loss of scintillator efficiency due to Ho3+ codoping, identifying the most significant loss pathways and estimating their impact. The findings suggest that Ho3+ codoping is an effective method for accelerating the scintillation response of GGAG:Ce. Furthermore, the study presents a high level of consistency of the Ce3+ kinetics with the Inokuti-Hirayama model and with results obtained in the previous studies on similar systems, demonstrating the predictability of the effect of RE3+ codoping on scintillator properties.

Quality assessment of niosomal suspensions.

Niosomes are vesicular carriers formed by a bilayer shell, which is composed of non-ionic surfactants with the addition of a structural supporting agent. Cholesterol is typically used as an additive to increase the stability or drug entrapment efficiency of niosomes. Although increasing the amount of cholesterol is reported to improve niosomal properties, an excessive amount of cholesterol may not be accommodated in the bilayer shell, and thus remain in the crystalline form in the niosomal solution. The presence of a crystalline phase is a potential risk for further medical application. Therefore, Tween 80-based niosomes were prepared using a well-established thin-film hydration method and organic phase injection method, followed by their thorough characterization in order to estimate the cholesterol incorporation into the niosomal shell. To detect the crystalline phase in the niosomal suspensions, a novel approach based on depolarized dynamic light scattering combined with cryo-transmission electron microscopy, X-ray diffraction and optical microscopy is used to confirm the presence of cholesterol crystals. This method is fast, quantitative, and allows the sample analysis in a natural liquid environment, thus eliminating biased results influenced by sample drying.

Formation of ibrutinib solvates: so similar, yet so different.

The transformation processes of non-solvated ibrutinib into a series of halogenated benzene solvates are explored in detail here. The transformation was studied in real time by X-ray powder diffraction in a glass capillary. Crystal structures of chlorobenzene, bromobenzene and iodobenzene solvates are isostructural, whereas the structure of fluorobenzene solvate is different. Four different mechanisms for transformation were discovered despite the similarity in the chemical nature of the solvents and crystal structures of the solvates formed. These mechanisms include direct transformations and transformations with either a crystalline or an amorphous intermediate phase. The binding preference of each solvate in the crystal structure of the solvates was examined in competitive slurry experiments and further confirmed by interaction strength calculations. Overall, the presented system and online X-ray powder diffraction measurement provide unique insights into the formation of solvates.

Impact of Solvent-Drug Interactions on the Desolvation of a Pharmaceutical Solvate.

In drug manufacturing, solvent-based methods are used for the crystallization of active pharmaceutical ingredients (APIs). Often, the solvent interacts with the API resulting in the formation of a new solid compound, the solvate. When desolvation occurs upon heating, it might result in the formation of new solid forms with significantly different physicochemical properties. Therefore, in this work, we study the desolvation kinetics by combining in situ powder X-ray diffraction (PXRD), all-atom molecular dynamics (MD) simulations, and macroscopic solid-state reaction kinetics modeling. The fluorobenzene (FB) solvate of Bruton's tyrosine kinase inhibitor Ibrutinib (IBR) was used as a model system. While the macroscopic solid-state modeling provides information about the desolvation kinetics, the MD simulations were used to trace individual FB molecules inside the crystal lattice. The activation energy of confined solvent diffusion, obtained by MD simulations, agrees well with results of the macroscopic solid-state reaction kinetics modeling. In addition, MD simulations provided detailed information about the IBR-FB interactions at the nanoscale. The mechanism revealed is that the solvent molecules diffusion, controlled by distinct open-close gating conformational changes of the drug, triggers the desolvation throughout the crystal lattice.

Long-chain mercury carboxylates relevant to saponification in oil and tempera paintings: XRPD and ssNMR complementary study of their crystal structures.

Saponification, resulting from pigment-binder interactions, is one of the most endangering phenomena affecting the appearance and stability of painted works of art. The crystallization of metal carboxylates (soaps) in paint layers is recently assumed as the most critical point for the development of undesirable changes induced by saponification, however, the factors triggering it are not fully understood. The red pigment cinnabar (HgS) has been suspected of contributing to saponification, however, the paucity of reliable reference structural data limited the experimental research of its effect at the molecular level. Within this study we synthesized mercury(II) carboxylates of the formula Hg(C16)x(C18)2-x (x = 0.0; 0.2; 0.5; 0.8; 1.0; 1.2; 1.5; 1.8; 2.0) where C16 and C18 are hexadecanoate (palmitate) and octadecanoate (stearate), respectively, and characterize them by combination of X-ray powder diffraction (XRPD) and 13C and 199Hg solid state NMR (ssNMR). For a more detailed interpretation of their structural and thermal behavior, Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) were used. The crystal structure of the studied mercury carboxylates was described on the basis of complementary ssNMR and XRPD measurements, Rietveld refinement and DFT calculations. All the subjected compounds crystallize in a monoclinic lattice of the C2/c symmetry. Mercury atoms are arranged in a slightly distorted square antiprismatic geometry and are monodentatically bonded to carboxylate anions. The structural disorder at the aliphatic end of the stearic acid chains was detected in the mixed carboxylates. Within the paper, the structural (dis)similarity with the corresponding lead carboxylates is discussed. The synthesized and characterized mercury carboxylates were applied to describe neo-formed mercury soaps in a model experiment simulating an egg-based paint system.

10-Methyl-isoalloxazine 5-oxide from synchrotron powder diffraction data.

THE TITLE COMPOUND [SYSTEMATIC NAME: 10-methyl-benzo[g]pteridine-2,4(3H,10H)-dione 5-oxide], C(11)H(8)N(4)O(3), consists of a large rigid isoalloxazine group which is approximately planar (r.m.s. deviation = 0.037 Å). In the crystal, inter-molecular N-H⋯O hydrogen bonds link the mol-ecules into centrosymmetric dimers. Dimers related by translation along the c axis form stacks through π-π inter-actions [centroid-centroid distances = 3.560 (5) and 3.542 (5) Å]. Weak inter-molecular C-H⋯O inter-actions further consolidate the crystal packing.

Alaptide from synchrotron powder diffraction data.

THE TITLE COMPOUND [SYSTEMATIC NAME: (8S)-8-methyl-6,9-diaza-spiro-[4.5]decane-7,10-dione], C(9)H(14)N(2)O(2), consists of two connected rings, viz. a piperazine-2,5-dione (DKP) ring and a five-membered ring. The DKP ring adopts a slight boat conformation and the bonded methyl group is in an equatorial position. The five-membered ring is in an envelope conformation. In the crystal structure, inter-molecular N-H⋯O hydrogen bonds link mol-ecules into chains running parallel to the c axis.

CrystalCMP: automatic comparison of molecular structures.

This article describes new developments in the CrystalCMP software. In particular, an automatic procedure for comparison of molecular packing is presented. The key components are an automated procedure for fragment selection and the replacement of the angle calculation by root-mean-square deviation of atomic positions. The procedure was tested on a large data set taken from the Cambridge Structural Database (CSD) and the results of all the comparisons were saved as an HTML page, which is freely available on the web. The analysis of the results allowed estimation of the threshold for identification of identical packing and allowed duplicates and entries with potentially incorrect space groups to be found in the CSD.

Transferring Lithium Ions in the Nanochannels of Flexible Metal-Organic Frameworks Featuring Superchaotropic Metallacarborane Guests: Mechanism of Ionic Conductivity at Atomic Resolution.

Metal-organic frameworks (MOFs), owing to their unique architecture, attract consistent attention in the design of high-performance Li battery materials. Here, we report a new category of ion-conducting crystalline materials for all-solid-state electrolytes based on an MIL53(Al) framework featuring a superchaotropic metallacarborane (Li+CoD-) salt and present the first quantitative data on Li+ ion sites, local dynamics, chemical exchange, and the formation of charge-transfer pathways. We used multinuclear solid-state nuclear magnetic resonance (ss-NMR) spectroscopy to examine the mechanism of ionic conductivity at atomic resolution and to elucidate order-disorder processes, framework-ion interactions, and framework breathing during the loading of Li+CoD- species and transfer of Li+ ions. In this way, the MIL53(Al)@LiCoD framework was found to adopt an open-pore conformation accompanied by a minor fraction of narrow-pore channels. The inserted Li+ ions have two states (free and bound), which both exhibit extensive motions. Both types of Li+ ions form mutually communicating chains, which are large enough to enable efficient long-range charge transfer and macroscopic conductivity. The superchaotropic anions undergo high-amplitude uniaxial rotation motions supporting the transfer of Li+ cations along them, while the fluctuations of MOF aromatic linkers support the penetration of Li+ through the channel walls. Our findings provide a detailed atomic-resolution insight into the mechanism of ionic conductivity and thus have significant implications for the design of the next generation of energy-related materials.

Methyl-ergometrine maleate from synchrotron powder diffraction data.

The title compound {systematic name: 9,10-didehydro-N-[1-(hydroxy-meth-yl)prop-yl]-d-lysergamide maleate}, C(20)H(26)N(3)O(2) (+)·C(4)H(3)O(4) (-), contains a large rigid ergolene group. This group consists of an indole plane connected to a six-membered carbon ring adopting an envelope conformation and N-methyl-tetra-hydro-pyridine where the methyl group is in an equatorial position. In the crystal, inter-molecular N-H⋯O, O-H⋯N and O-H⋯O hydrogen bonds form an extensive three-dimensional hydrogen-bonding network, which holds the cations and anions together.