A Compressed-Sensing Based Blind Deconvolution Method for Image Deblurring in Dental Cone-Beam Computed Tomography.

In cone-beam computed tomography (CBCT), reconstructed images are inherently degraded, restricting its image performance, due mainly to imperfections in the imaging process resulting from detector resolution, noise, X-ray tube's focal spot, and reconstruction procedure as well. Thus, the recovery of CBCT images from their degraded version is essential for improving image quality. In this study, we investigated a compressed-sensing (CS)-based blind deconvolution method to solve the blurring problem in CBCT where both the image to be recovered and the blur kernel (or point-spread function) of the imaging system are simultaneously recursively identified. We implemented the proposed algorithm and performed a systematic simulation and experiment to demonstrate the feasibility of using the algorithm for image deblurring in dental CBCT. In the experiment, we used a commercially available dental CBCT system that consisted of an X-ray tube, which was operated at 90 kVp and 5 mA, and a CMOS flat-panel detector with a 200-µm pixel size. The image characteristics were quantitatively investigated in terms of the image intensity, the root-mean-square error, the contrast-to-noise ratio, and the noise power spectrum. The results indicate that our proposed method effectively reduced the image blur in dental CBCT, excluding repetitious measurement of the system's blur kernel.

Eliminating artifacts in single-grid phase-contrast x-ray imaging for improving image quality.

In this study, we propose a modification to a single-grid phase-contrast x-ray imaging (PCXI) system using a Fourier domain analysis technique to extract absorption, scattering, and differential phase-contrast images. The proposed modification is to rotate the x-ray grid in the image plane to achieve spectral separation between the desired information and the moiré artifact, which is introduced by the superposition of the periodic image of the grid shadow and the periodic sampling by the detector. In addition, we performed some system optimization by adjusting distances between source, object, grid, and detector to further improve image quality. This optimization aimed to increase the spectral spacing between the primary spectrum (lower frequency) and the harmonics of the spectrum (higher frequency) used to extract the various image contrasts. The table-top setup used in the experiment consisted of a focused-linear grid with a 200-lines/inch strip density, a microfocus x-ray tube with a 55-µm focal spot size, and a CMOS flat-panel detector with a 49.5-µm pixel size. The x-ray grid was rotated at 27.8° with respect to the detector and the sample was placed as close as possible to the x-ray tube. Our results indicated that the proposed method effectively eliminated the PCXI artifacts, thus improving image quality.

Removal of selected metal ions from aqueous solution using modified corncobs.

The objective of this study was to convert corncobs to metal ion adsorbents for wastewater treatment. Ground corncobs were modified with either 0.6 M citric acid (CA) or 1.0 M phosphoric acid (PA) to help improve their natural adsorption capacity. The effect of a combination of wash and modification treatment was tested for corncob adsorption efficiency with five different metal ions (cadmium, copper, lead, nickel, zinc) individually or in a mixed solution containing each metal at a 20 mM concentration. Results were compared to those of commercial resins Amberlite IRC-718, Amberlite 200, Duolite GT-73 and carboxymethylcellulose (CMC). Modified corncobs showed the same adsorption efficiency as Duolite GT-73 for cadmium, copper, nickel and zinc ions and had greater adsorption than CMC for nickel and zinc ions. For mixed metals, the modified corncobs exhibited the same adsorption efficiency as Duolite GT-73 for cadmium and copper ions and the same or higher adsorption than Amberlite IRC-718 for lead ions. Adsorption capacities of modified samples were compared to those of Amberlite IRC-718, Amberlite 200 and Duolite GT-73. Commercial resins generally had higher adsorption capacities than modified corncobs. However, the adsorption capacity of modified corncobs for copper and lead ions was equivalent to Duolite GT-73, but was lower than for Amberlite IRC-718 or Amberlite 200. Depending on the specific metal ion and the presence or absence of other metal ions, chemically modified corncobs were at least equivalent in adsorption properties to all of the commercial cation exchange resins examined in this study.

Microbial Transformation of Squalene: Terminal Methyl Group Oxidation by Corynebacterium sp.

Corynebacterium sp. strain SY-79 was isolated from soil, using squalene as a carbon source. Microbiological properties of this bacterium are described. The metabolic product of this bacterium from squalene was identified as 2,6,10,15,19, 23-hexamethyl-2,6,10,14,18,22-tetracosahexaenedioic acid (squalenedioic acid).

Oxidation of acyclic terpenoids by Corynebacterium sp.

Squalene analogs such as lycopersene, geranylfarnesyl, digeranyl, and 2-hydroxy-2,3-dihydrosqualene and terpene alcohol derivatives such as farnesyl benzyl ether, farnesyl pivalate, geranylgeranyl pivalate, geranyl pivalate, and geranyl benzyl ether were oxidized by Corynebacterium sp. strain SY-79, which was isolated from soil by using squalene as a carbon source. Lycopersene and geranylfarnesyl gave no major product. Digeranyl, geranyl benzyl ether, and geranyl pivalate gave terminal oxidation products, and 2-hydroxy-2,3-dihydrosqualene, farnesyl benzyl ether, farnesyl pivalate, and geranylgeranyl pivalate were degraded to give lower molecular carboxylic acids. Strain SY-79 showed promising oxidative activities toward acyclic terpenes, although the metabolites obtained were variable, depending upon the structure of the substrate.

Formation of methionine from alpha-amino-n-butyric acid and 5'-methylthioadenosine in the rat.

Adult rats may utilize two metabolites of methionine for the biosynthesis of this essential amino acid. In separate experiments methionine, labeled with 14C or with 35S was observed in plasma and urine following the administration of [2-14C]-alpha-amino-n-butyric acid or [35S]-5'-methylthioadenosine by stomach tube. Although alpha-amino-n-butyric acid (ABA) or homoserine, alone or with dietary sodium sulfate, choline, and/or S-methylcysteine, was not utilized for growth, weight loss in weanling rats was decreased by dietary cysteine when fed as an additive to a basal methionine-free, cysteine-free, labile methyl-free, sulfur-free diet. Following the addition of 10 mg ABA and 28 mg 5'-methylthioadenosine/day to the basal diet, growth response was equivalent to that occurring in rats receiving 27 mg of methionine/day with the basal diet. The implications of these findings for adaptation to protein restriction and a discussion of equilibrium and steady state conditions related to the increase in methionine content in the blood are presented.