Monoolein-Based Wireless Capacitive Sensor for Probing Skin Hydration.

Capacitive humidity sensors typically consist of interdigitated electrodes coated with a dielectric layer sensitive to varying relative humidity levels. Previous studies have investigated different polymeric materials that exhibit changes in conductivity in response to water vapor to design capacitive humidity sensors. However, lipid films like monoolein have not yet been integrated with humidity sensors, nor has the potential use of capacitive sensors for skin hydration measurements been fully explored. This study explores the application of monoolein-coated wireless capacitive sensors for assessing relative humidity and skin hydration, utilizing the sensitive dielectric properties of the monoolein-water system. This sensitivity hinges on the water absorption and release from the surrounding environment. Tested across various humidity levels and temperatures, these novel double functional sensors feature interdigitated electrodes covered with monoolein and show promising potential for wireless detection of skin hydration. The water uptake and rheological behavior of monoolein in response to humidity were evaluated using a quartz crystal microbalance with dissipation monitoring. The findings from these experiments suggest that the capacitance of the system is primarily influenced by the amount of water in the monoolein system, with the lyotropic or physical state of monoolein playing a secondary role. A proof-of-principle demonstration compared the sensor's performance under varying conditions to that of other commercially available skin hydration meters, affirming its effectiveness, reliability, and commercial viability.

Wearable Electronic Tongue for Non-Invasive Assessment of Human Sweat.

Sweat is a promising biofluid in allowing for non-invasive sampling. Here, we investigate the use of a voltammetric electronic tongue, combining different metal electrodes, for the purpose of non-invasive sample assessment, specifically focusing on sweat. A wearable electronic tongue is presented by incorporating metal electrodes on a flexible circuit board and used to non-invasively monitor sweat on the body. The data obtained from the measurements were treated by multivariate data processing. Using principal component analysis to analyze the data collected by the wearable electronic tongue enabled differentiation of sweat samples of different chemical composition, and when combined with 1H-NMR sample differentiation could be attributed to changing analyte concentrations.

Development and evaluation of a physical activity intervention informed by participatory research- a feasibility study.

BACKGROUND: Despite numerous interventions aiming to improve physical activity in socially disadvantaged populations, physical inactivity remains to be a rising challenge to public health globally, as well as, in Sweden. In an effort to address this challenge, a community-based participatory intervention was developed through active community engagement and implemented in a socially disadvantaged neighborhood in Sweden. The current study aims to present the development and initial evaluation of a participatory research driven physical activity intervention. METHODS: Fifteen participants (11 females and 4 males) aged 17-59 years volunteered to participate in the physical activity intervention program. The intervention program was evaluated using a longitudinal mixed methods design measuring health impact changes over time through focus group discussions and quality of life surveys. Further additional biomedical health parameters such as levels of glycosylated hemoglobin, blood pressure, levels of oxygen saturation and body mass index were monitored before and after the intervention. Focus group data were analyzed using content analysis with an inductive approach. The pre-and post-test scores from the survey-based quality of life domains, as well as the health parameters were compared using non-parametric and parametric statistics. RESULTS: Four themes emerged from the analysis of the focus group discussions including sense of fellowship, striving for inclusion and equity, changing the learner perspective and health beyond illness. The scores for the domains Physical Health, Psychological Health, Social Relationships and Health Satisfaction where significantly higher after participation in the physical activity intervention program compared to the pre-test scores (p < .05)s. There were however, no significant changes in the scores for the environmental domain and overall quality of life after intervention compared to that prior to intervention start. Overall, the biomedical health parameters remained stable within the normal ranges during intervention. CONCLUSION: The focus group discussions and results from the surveys and biomedical measures reveal important findings to understand and further develop the intervention program to promote health equity among citizens in disadvantaged areas. Evaluating the feasibility of such an intervention using multiple approaches contributes to effective implementation of it for larger communities in need.

Non-Invasive Electrochemical Biosensors Operating in Human Physiological Fluids.

Non-invasive healthcare technologies are an important part of research and development nowadays due to the low cost and convenience offered to both healthcare receivers and providers. This work overviews the recent advances in the field of non-invasive electrochemical biosensors operating in secreted human physiological fluids, viz. tears, sweat, saliva, and urine. Described electrochemical devices are based on different electrochemical techniques, viz. amperometry, coulometry, cyclic voltammetry, and impedance spectroscopy. Challenges that confront researchers in this exciting area and key requirements for biodevices are discussed. It is concluded that the field of non-invasive sensing of biomarkers in bodily fluid is highly convoluted. Nonetheless, if the drawbacks are appropriately addressed, and the pitfalls are adroitly circumvented, the approach will most certainly disrupt current clinical and self-monitoring practices.

Halides inhibition of multicopper oxidases studied by FTIR spectroelectrochemistry using azide as an active infrared probe.

An infrared spectroelectrochemical study of Trametes hirsuta laccase and Magnaporthe oryzae bilirubin oxidase has been performed using azide, an inhibitor of multicopper oxidases, as an active infrared probe incorporated into the T2/T3 copper cluster of the enzymes. The redox potential-controlled measurements indicate that N3- stretching IR bands of azide ion bound to the T2/T3 cluster are only detected for the oxidized enzymes, confirming that azide only binds to Cu2+. Moreover, the process of binding/dissociation of azide ion is shown to be reversible. The interaction of halide anions, which also inhibit multicopper oxidases, with the active site of the enzymes was studied by measuring the changes in the azide FTIR bands. Enzymes inhibited by azide respond differently upon addition of fluoride or chloride ions to the sample solution inhibited by azide. Fluoride ions compete with azide for binding at one of the T2/T3 Cu ions, whereas competition from chloride ions is much less evident.

Fully Enzymatic Membraneless Glucose|Oxygen Fuel Cell That Provides 0.275 mA cm(-2) in 5 mM Glucose, Operates in Human Physiological Solutions, and Powers Transmission of Sensing Data.

Coimmobilization of pyranose dehydrogenase as an enzyme catalyst, osmium redox polymers [Os(4,4'-dimethoxy-2,2'-bipyridine)2(poly(vinylimidazole))10Cl](+) or [Os(4,4'-dimethyl-2,2'-bipyridine)2(poly(vinylimidazole))10Cl](+) as mediators, and carbon nanotube conductive scaffolds in films on graphite electrodes provides enzyme electrodes for glucose oxidation. The recombinant enzyme and a deglycosylated form, both expressed in Pichia pastoris, are investigated and compared as biocatalysts for glucose oxidation using flow injection amperometry and voltammetry. In the presence of 5 mM glucose in phosphate-buffered saline (PBS) (50 mM phosphate buffer solution, pH 7.4, with 150 mM NaCl), higher glucose oxidation current densities, 0.41 mA cm(-2), are obtained from enzyme electrodes containing the deglycosylated form of the enzyme. The optimized glucose-oxidizing anode, prepared using deglycosylated enzyme coimmobilized with [Os(4,4'-dimethyl-2,2'-bipyridine)2(poly(vinylimidazole))10Cl](+) and carbon nanotubes, was coupled with an oxygen-reducing bilirubin oxidase on gold nanoparticle dispersed on gold electrode as a biocathode to provide a membraneless fully enzymatic fuel cell. A maximum power density of 275 µW cm(-2) is obtained in 5 mM glucose in PBS, the highest to date under these conditions, providing sufficient power to enable wireless transmission of a signal to a data logger. When tested in whole human blood and unstimulated human saliva maximum power densities of 73 and 6 µW cm(-2) are obtained for the same fuel cell configuration, respectively.

A Nernstian Biosupercapacitor.

We propose the very first "Nernstian biosupercapacitor", a biodevice based on only one redox polymer: poly(vinyl imidazole-co-allylamine)[Os(bpy)2 Cl], and two biocatalysts. At the bioanode PQQ-dependent glucose dehydrogenase reduces the Os3+ moieties at the polymer to Os2+ shifting the Nernst potential of the Os3+ /Os2+ redox couple to negative values. Concomitantly, at the biocathode the reduction of O2 by means of bilirubin oxidase embedded in the same redox polymer leads to the oxidation of Os2+ to Os3+ shifting the Nernst potential to higher values. Despite the use of just one redox polymer an open circuit voltage of more than 0.45 V was obtained during charging and the charge is stored in the redox polymer at both the bioanode and the biocathode. By connecting both electrodes via a predefined resistor a high power density is obtained for a short time exceeding the steady state power of a corresponding biofuel cell by a factor of 8.

Effect of the L499M mutation of the ascomycetous Botrytis aclada laccase on redox potential and catalytic properties.

Laccases are members of a large family of multicopper oxidases that catalyze the oxidation of a wide range of organic and inorganic substrates accompanied by the reduction of dioxygen to water. These enzymes contain four Cu atoms per molecule organized into three sites: T1, T2 and T3. In all laccases, the T1 copper ion is coordinated by two histidines and one cysteine in the equatorial plane and is covered by the side chains of hydrophobic residues in the axial positions. The redox potential of the T1 copper ion influences the enzymatic reaction and is determined by the nature of the axial ligands and the structure of the second coordination sphere. In this work, the laccase from the ascomycete Botrytis aclada was studied, which contains conserved Ile491 and nonconserved Leu499 residues in the axial positions. The three-dimensional structures of the wild-type enzyme and the L499M mutant were determined by X-ray crystallography at 1.7 Šresolution. Crystals suitable for X-ray analysis could only be grown after deglycosylation. Both structures did not contain the T2 copper ion. The catalytic properties of the enzyme were characterized and the redox potentials of both enzyme forms were determined: E0 = 720 and 580 mV for the wild-type enzyme and the mutant, respectively. Since the structures of the wild-type and mutant forms are very similar, the change in the redox potential can be related to the L499M mutation in the T1 site of the enzyme.

Bioelectrochemical oxidation of water.

The electrolysis of water provides a link between electrical energy and hydrogen, a high energy density fuel and a versatile energy carrier, but the process is very expensive. Indeed, the main challenge is to reduce energy consumption for large-scale applications using efficient renewable catalysts that can be produced at low cost. Here we present for the first time that laccase can catalyze electrooxidation of H2O to molecular oxygen. Native and laboratory-evolved laccases immobilized onto electrodes serve as bioelectrocatalytic systems with low overpotential and a high O2 evolution ratio against H2O2 production during H2O electrolysis. Our results open new research ground on H2O splitting, as they overcome serious practical limitations associated with artificial electrocatalysts currently used for O2 evolution.

Interfacial behavior and activity of laccase and bilirubin oxidase on bare gold surfaces.

Two blue multicopper oxidases (MCOs) (viz. Trametes hirsuta laccase (ThLc) and Myrothecium verrucaria bilirubin oxidase (MvBOx)) were immobilized on bare polycrystalline gold (Au) surfaces by direct adsorption from both dilute and concentrated enzyme solutions. The adsorption was studied in situ by means of null ellipsometry. Moreover, both enzyme-modified and bare Au electrodes were investigated in detail by atomic force microscopy (AFM) as well as electrochemically. When adsorbed from dilute solutions (0.125 and 0.25 mg mL⁻¹ in the cases of ThLc and MvBOx, respectively), the amounts of enzyme per unit area were determined to be ca. 1.7 and 4.8 pmol cm⁻², whereas the protein film thicknesses were determined to be 29 and 30 Å for ThLc and MvBOx, respectively. A well-pronounced bioelectrocatalytic reduction of molecular oxygen (O2) was observed on MvBOx/Au biocathodes, whereas this was not the case for ThLc-modified Au electrodes (i.e., adsorbed ThLc was catalytically inactive). The initially observed apparent k(cat)(app) values for adsorbed MvBOx and the enzyme in solution were found to be very close to each other (viz. 54 and 58 s⁻¹, respectively (pH 7.4, 25 °C)). However, after 3 h of operation of MvBOx/Au biocathodes, kcatapp dropped to 23 s⁻¹. On the basis of the experimental results, conformational changes of the enzymes (in all likelihood, their flattening on the Au surface) were suggested to explain the deactivation of MCOs on the bare Au electrodes.

Effect of Protection Polymer Coatings on the Performance of an Amperometric Galactose Biosensor in Human Plasma.

Galactose monitoring in individuals allows the prevention of harsh health conditions related to hereditary metabolic diseases like galactosemia. Current methods of galactose detection need development to obtain cheaper, more reliable, and more specific sensors. Enzyme-containing amperometric sensors based on galactose oxidase activity are a promising approach, which can be enhanced by means of their inclusion in a redox polymer coating. This strategy simultaneously allows the immobilization of the biocatalyst to the electroactive surface and hosts the electron shuttling units. An additional deposition of capping polymers prevents external interferences like ascorbic or uric acid as well as biofouling when measuring in physiological fuels. This work studies the protection effect of poly(2-methacryloyloxyethyl phosphorylcholine-co-glycidyl methacrylate (MPC) and polyvinylimidazole-polysulfostyrene (P(VI-SS)) when incorporated in the biosensor design for the detection of galactose in human plasma.

Miniature biofuel cell as a potential power source for glucose-sensing contact lenses.

A microscale membrane-less biofuel cell, capable of generating electrical energy from human lachrymal liquid, was developed by utilizing the ascorbate and oxygen naturally present in tears as fuel and oxidant. The biodevice is based on three-dimensional nanostructured gold electrodes covered with abiotic (conductive organic complex) and biological (redox enzyme) materials functioning as efficient anodic and cathodic catalysts, respectively. Three-dimensional nanostructured electrodes were fabricated by modifying 100 µm gold wires with 17 nm gold nanoparticles, which were further modified with tetrathiafulvalene-tetracyanoquinodimethane conducting complex to create the anode and with Myrothecium verrucaria bilirubin oxidase to create the biocathode. When operated in human tears, the biodevice exhibited the following characteristics: an open circuit voltage of 0.54 V, a maximal power density of 3.1 µW cm(-2) at 0.25 V and 0.72 µW cm(-2) at 0.4 V, with a stable current density output of over 0.55 µA cm(-2) at 0.4 V for 6 h of continuous operation. These findings support our proposition that an ascorbate/oxygen biofuel cell could be a suitable power source for glucose-sensing contact lenses to be used for continuous health monitoring by diabetes patients.

Biofuel cells for biomedical applications: colonizing the animal kingdom.

Interdisciplinary research has combined the efforts of many scientists and engineers to gain an understanding of biotic and abiotic electrochemical processes, materials properties, biomedical, and engineering approaches for the development of alternative power-generating and/or energy-harvesting devices, aiming to solve health-related issues and to improve the quality of human life. This review intends to recapitulate the principles of biofuel cell development and the progress over the years, thanks to the contribution of cross-disciplinary researchers that have combined knowledge and innovative ideas to the field. The emergence of biofuel cells, as a response to the demand of electrical power devices that can operate under physiological conditions, are reviewed. Implantable biofuel cells operating inside living organisms have been envisioned for over fifty years, but few reports of implanted devices have existed up until very recently. The very first report of an implanted biofuel cell (implanted in a grape) was published only in 2003 by Adam Heller and his coworkers. This work was a result of earlier scientific efforts of this group to "wire" enzymes to the electrode surface. The last couple of years have, however, seen a multitude of biofuel cells being implanted and operating in different living organisms, including mammals. Herein, the evolution of the biofuel concept, the understanding and employment of catalyst and biocatalyst processes to mimic biological processes, are explored. These potentially green technology biodevices are designed to be applied for biomedical applications to power nano- and microelectronic devices, drug delivery systems, biosensors, and many more.

Optimization of a membraneless glucose/oxygen enzymatic fuel cell based on a bioanode with high coulombic efficiency and current density.

After initial testing and optimization of anode biocatalysts, a membraneless glucose/oxygen enzymatic biofuel cell possessing high coulombic efficiency and power output was fabricated and characterized. Two sugar oxidizing enzymes, namely, pyranose dehydrogenase from Agaricus meleagris (AmPDH) and flavodehydrogenase domains of various cellobiose dehydrogenases (DH(CDH)) were tested during the pre-screening. The enzymes were mixed, "wired" and entrapped in a low-potential Os-complex-modified redox-polymer hydrogel immobilized on graphite. This anode was used in combination with a cathode based on bilirubin oxidase from Myrothecium verrucaria adsorbed on graphite. Optimization showed that the current density for the mixed enzyme electrode could be further improved by using a genetically engineered variant of the non-glycosylated flavodehydrogenase domain of cellobiose dehydrogenase from Corynascus thermophilus expressed in E. coli (ngDH(CtCDHC310Y)) with a high glucose-turnover rate in combination with an Os-complex-modified redox polymer with a high concentration of Os complexes as well as a low-density graphite electrode. The optimized biofuel cell with the AmPDH/ngDH(CtCDHC310Y) anode showed not only a similar maximum voltage as with the biofuel cell based only on the ngDH(CtCDHC310Y) anode (0.55 V) but also a substantially improved maximum power output (20 µW cm(-2)) at 300 mV cell voltage in air-saturated physiological buffer. Most importantly, the estimated half-life of the mixed biofuel cell can reach up to 12 h, which is apparently longer than that of a biofuel cell in which the bioanode is based on only one single enzyme.

Flexible micro(bio)sensors for quantitative analysis of bioanalytes in a nanovolume of human lachrymal liquid.

A flexible electrochemical micro(bio)sensor has been designed for determination of several biological compounds, specifically, ascorbate, dopamine, and glucose, in human lachrymal liquid (tears). The microsensor for simultaneous determination of ascorbate and dopamine concentrations was based on a gold microwire modified with the tetrathiafulvalen-7,7,8,8-tetracyanoquinodimethane complex as a catalyst. To monitor glucose concentration in tears, glucose dehydrogenase was immobilized on a gold microwire modified with carbon nanotubes and an osmium redox polymer. A capillary microcell was constructed for sampling tears. The cell had a working volume of 60-100 nL with a sampling deviation of 6.7%. To check if the microcell was properly filled with buffer or tear sample, a control electrode was introduced into the construction. The electrode was used to measure the electrical resistance of a fully filled nanovolume cell. The mechanical flexibility is one of the most important features of the prototype and allowed direct collection of tears with minimized risk of damage to the eye.

Electronic Tongue for Direct Assessment of SARS-CoV-2-Free and Infected Human Saliva-A Feasibility Study.

An electronic tongue is a powerful analytical instrument based on an array of non-selective chemical sensors with a partial specificity for data gathering and advanced pattern recognition methods for data analysis. Connecting electronic tongues with electrochemical techniques for data collection has led to various applications, mostly within sensing for food quality and environmental monitoring, but also in biomedical research for the analyses of different bioanalytes in human physiological fluids. In this paper, an electronic tongue consisting of six electrodes (viz., gold, platinum, palladium, titanium, iridium, and glassy carbon) was designed and tested in authentic (undiluted, unpretreated) human saliva samples from eight volunteers, collected before and during the COVID-19 pandemic. Investigations of 11 samples using differential pulse voltammetry and a principal component analysis allowed us to distinguish between SARS-CoV-2-free and infected authentic human saliva. This work, as a proof-of-principle demonstration, provides a new perspective for the use of electronic tongues in the field of enzyme-free electrochemical biosensing, highlighting their potential for future applications in non-invasive biomedical analyses.

Health and quality of life among women after participation in a CBPR-informed physical activity intervention: with a pandemic perspective.

The lack of culturally and contextually oriented interventions promoting physical activity (PA) has led to increased physical inactivity among women living in disadvantaged neighbourhoods in Sweden. In this study one such intervention informed by community-based participatory research (CBPR) has been evaluated among 34 women from a disadvantaged neighbourhood before and during COVID-19. Health-related quality of life (HRQOL), behavioural and biomedical outcomes were assessed directly prior and post-intervention, followed by evaluations at 6-months and 18-months follow-up during COVID-19. The results revealed that HRQOL, particularly psychological, social, and environmental health significantly increased post-intervention compared to prior to intervention but reversed back at 6-months follow-up. Perceived health satisfaction and environmental health increased at 18-months follow-up during COVID-19. Participation in PA improved post-intervention and at 6-months follow-up. Everyday activities and fruit and vegetable intake continued to increase through all timepoints. Systolic blood pressure significantly decreased post-intervention and 6-months follow-up; blood flow rate increased significantly at all timepoints. Overall, the findings underscores the potential effectiveness of CBPR approaches in promoting and sustaining healthy lifestyles, even during acute situations such as the COVID-19. It may even serve as a future model for promoting health and addressing health disparities in similar groups.

Continuous ex vivo glucose sensing in human physiological fluids using an enzymatic sensor in a vein replica.

Managing blood glucose can affect important clinical outcomes during the intraoperative phase of surgery. However, currently available instruments for glucose monitoring during surgery are few and not optimized for the specific application. Here we report an attempt to exploit an enzymatic sensor in a vein replica that could continuously monitor glucose level in an authentic human bloodstream. First, detailed investigations of the superficial venous systems of volunteers were carried out using ocular and palpating examinations, as well as advanced ultrasound measurements. Second, a tubular glucose-sensitive biosensor mimicking a venous system was designed and tested. Almost ideal linear dependence of current output on glucose concentration in phosphate buffer saline was obtained in the range 2.2-22.0 mM, whereas the dependence in human plasma was less linear. Finally, the developed biosensor was investigated in whole blood under homeostatic conditions. A specific correlation was found between the current output and glucose concentration at the initial stage of the biodevice operation. However, with time, blood coagulation during measurements negatively affected the performance of the biodevice. When the experimental results were remodeled to predict the response without the influence of blood coagulation, the sensor output closely followed the blood glucose level.

Gold nanoparticles as electronic bridges for laccase-based biocathodes.

Direct electron transfer (DET) reactions between redox enzymes and electrodes can be maximized by oriented immobilization of the enzyme molecules onto an electroactive surface modified with functionalized gold nanoparticles (AuNPs). Here, we present such strategy for obtaining a DET-based laccase (Lc) cathode for O(2) electroreduction at low overpotentials. The stable nanostructured enzymatic electrode is based on the step-by-step covalent attachment of AuNPs and Lc molecules to porous graphite electrodes using the diazonium salt reduction strategy. Oriented immobilization of the enzyme molecules on adequately functionalized AuNPs allows establishing very fast DET with the electrode via their Cu T1 site. The measured electrocatalytic waves of O(2) reduction can be deconvoluted into two contributions. The one at lower overpotentials corresponds to immobilized Lc molecules that are efficiently wired by the AuNPs with a heterogeneous electron transfer rate constant k(0) ≫ 400 s(-1).

Developing and evaluating non-invasive healthcare technologies for a group of female participants from a socioeconomically disadvantaged area.

When compared to the general population, socioeconomically disadvantaged communities frequently experience compromised health. Monitoring the divide is challenging since standardized biomedical tests are linguistically and culturally inappropriate. The aim of this study was to develop and test a unique mobile biomedical testbed based on non-invasive analysis, as well as to explore the relationships between the objective health measures and subjective health outcomes, as evaluated with the World Health Organization Quality of Life survey. The testbed was evaluated in a socioeconomically disadvantaged neighborhood in Malmö, which has been listed as one of the twelve most vulnerable districts in Sweden. The study revealed that compared to conventional protocols the less intrusive biomedical approach was highly appreciated by the participants. Surprisingly, the collected biomedical data illustrated that the apparent health of the participants from the ethnically diverse low-income neighborhood was comparable to the general Swedish population. Statistically significant correlations between perceived health and biomedical data were disclosed, even though the dependences found were complex, and recognition of the manifest complexity needs to be included in further research. Our results validate the potential of non-invasive technologies in combination with advanced statistical analysis, especially when combined with linguistically and culturally appropriate healthcare methodologies, allowing participants to appreciate the significance of the different parameters to evaluate and monitor aspects of health.