pH-responsive polymeric micelle carriers for siRNA drugs.

The ability of small interfering RNA (siRNA) to efficiently silence the expression of specific genes provides the basis for exciting new therapies based on RNA interference (RNAi). The efficient intracellular delivery of siRNA from cell uptake through the endosomal trafficking pathways into the cytoplasm remains a significant challenge. Previously we described the synthesis of a new family of diblock copolymer siRNA carriers using controlled reversible addition-fragmentation chain transfer (RAFT) polymerization. The carriers were composed of a positively charged block of dimethylaminoethyl methacrylate (DMAEMA) to mediate siRNA binding and a second pH-responsive endosome releasing block composed of DMAEMA and propylacrylic acid (PAA) in roughly equimolar ratios and butyl methacylate (BMA). Here we describe the development of a new generation of siRNA delivery polymers based on this design that exhibit enhanced transfection efficiency and low cytotoxicity. This design incorporates a longer endosomolytic block with increased hydrophobic content to induce micelle formation. These polymers spontaneously form spherical micelles in the size range of 40 nm with CMC (critical micelle concentration) values of approximately 2 µg/mL based on dynamic light scattering (DLS), (1)H NMR, electron microscopy, and selective partitioning of the small molecule pyrene into the hydrophobic micelle core. The siRNA binding to the cationic shell block did not perturb micelle stability or significantly increase particle size. The self-assembly of the diblock copolymers into particles was shown to provide a significant enhancement in mRNA knockdown at siRNA concentrations as low as 12.5 nM. Under these conditions, the micelle-based systems showed an 89% reduction in GAPDH mRNA levels as compared to only 23% (10 nM siRNA) for the nonmicelle system. The reduction in mRNA levels becomes nearly quantitative as the siRNA concentration is increased to 25 nM and higher. Flow cytometry analysis of fluorescent-labeled siRNA showed uptake in 90% of cells and a 3-fold increase in siRNA per cell compared to a standard lipid transfection agent. These results demonstrate the potential utility of this carrier design for siRNA drug delivery.

Structural studies of binding site tryptophan mutants in the high-affinity streptavidin-biotin complex.

Previous thermodynamic and computational studies have pointed to the important energetic role of aromatic contacts in generating the exceptional binding free energy of streptavidin-biotin association. We report here the crystallographic characterization of single site tryptophan mutants in investigating structural consequences of alterations in these aromatic contacts. Four tryptophan residues, Trp79, Trp92, Trp108 and Trp120, play an important role in the hydrophobic binding contributions, which along with a hydrogen bonding network and a flexible binding loop give rise to tight ligand binding (Ka approximately 10(13) M-1). The crystal structures of ligand-free and biotin-bound mutants, W79F, W108F, W120F and W120A, in the resolution range from 1.9 to 2.3 A were determined. Nine data sets for these four different mutants were collected, and structural models were refined to R-values ranging from 0.15 to 0.20. The major question addressed here is how these mutations influence the streptavidin binding site and in particular how they affect the binding mode of biotin in the complex. The overall folding of streptavidin was not significantly altered in any of the tryptophan mutants. With one exception, only minor deviations in the unbound structures were observed. In one crystal form of unbound W79F, there is a coupled shift in the side-chains of Phe29 and Tyr43 toward the mutation site, although in a different crystal form these shifts are not observed. In the bound structures, the orientation of biotin in the binding pocket was not significantly altered in the mutant complex. Compared with the wild-type streptavidin-biotin complex, there were no additional crystallographic water molecules observed for any of the mutants in the binding pocket. These structural studies thus suggest that the thermodynamic alterations can be attributed to the local alterations in binding residue composition, rather than a rearrangement of binding site architectures.

Dynamic intracellular delivery of antibiotics via pH-responsive polymersomes.

Reversible addition-fragmentation chain transfer (RAFT) polymerization was employed to prepare a series of copolymers consisting of 2-hdroxyethyl methacrylate (HEMA) and poly(ethylene glycol) methyl ether methacrylate (FWavg ~ 950 Da) (O950) with variable comonomer compositions and molecular weights for use as polymeric scaffolds. Reactivity ratios for the monomer pair were determined to be 1.37 and 0.290 respectively. To these scaffolds trithiocarbonate-based RAFT chain transfer agents (CTAs) were grafted using carbodiimide chemistry. The resultant graft chain transfer agents (gCTA) were subsequently employed to polymerize dimethylaminoethyl methacrylate (DMAEMA) and (HPMA) between degrees of polymerization (DP) of 25 and 200. Kinetic analysis for the polymerization of DMAEMA targeting a DP of 100 from a 34 arm graft gCTA show linear Mn conversion and pseudo first order rate plots with narrow molecular weight distributions that move toward lower elution volumes with monomer conversion. D values for these polymerizations remain low at around 1.20 at monomer conversions as high as 70 %. pH-responsive endosomalytic brushes capable of spontaneously self-assembling into polymersomes were synthesized and a combination of dynamic light scattering (DLS), cryoTEM, and red blood cell hemolysis were employed to evaluate the aqueous solution properties of the polymeric brush as a function of pH. Successful encapsulation of ceftazidime and pH-dependent drug release properties were confirmed by HPLC. Intracellular antibiotic activity of the drug-loaded polymersomes was confirmed in a macrophage coculture model of infection with B. thailandensis and RAW 264.7 cells.

Well-defined single polymer nanoparticles for the antibody-targeted delivery of chemotherapeutic agents.

Aqueous reversible addition-fragmentation chain transfer (RAFT) polymerization was employed to prepare a series of linear copolymers of N,N-dimethylacrylamide (DMA) and 2-hydroxyethylacrylamide (HEAm) with narrow D values over a molecular weight range spanning three orders of magnitude (103 to 106 Da). Trithiocarbonate-based RAFT chain transfer agents (CTAs) were grafted onto these scaffolds using carbodiimide chemistry catalyzed with DMAP. The resultant graft chain transfer agent (gCTA) was subsequently employed to synthesize polymeric brushes with a number of important vinyl monomer classes including acrylamido, methacrylamido, and methacrylate. Brush polymerization kinetics were evaluated for the aqueous RAFT polymerization of DMA from a 10 arm gCTA. Polymeric brushes containing hydroxyl functionality were further functionalized in order to prepare 2nd generation gCTAs which were subsequently employed to prepare polymers with a brushed-brush architecture with molecular weights in excess of 106 Da. These resultant single particle nanoparticles (SNPs) were employed as drug delivery vehicles for the anthracycline-based drug doxorubicin via copolymerization of DMA with a protected carbazate monomer (bocSMA). Cell-specific targeting functionality was also introduced via copolymerization with a biotin-functional monomer (bioHEMA). Drug release of the hydrazone linked doxorubicin was evaluated as function of pH and serum and chemotherapeutic activity was evaluated in SKOV3 ovarian cancer cells.

Nanoparticle distribution during systemic inflammation is size-dependent and organ-specific.

This study comprehensively investigates the changing biodistribution of fluorescent-labelled polystyrene latex bead nanoparticles in a mouse model of inflammation. Since inflammation alters systemic circulatory properties, increases vessel permeability and modulates the immune system, we theorised that systemic inflammation would alter nanoparticle distribution within the body. This has implications for prospective nanocarrier-based therapies targeting inflammatory diseases. Low dose lipopolysaccharide (LPS), a bacterial endotoxin, was used to induce an inflammatory response, and 20 nm, 100 nm or 500 nm polystyrene nanoparticles were administered after 16 hours. HPLC analysis was used to accurately quantify nanoparticle retention by each vital organ, and tissue sections revealed the precise locations of nanoparticle deposition within key tissues. During inflammation, nanoparticles of all sizes redistributed, particularly to the marginal zones of the spleen. We found that LPS-induced inflammation induces splenic macrophage polarisation and alters leukocyte uptake of nanoparticles, with size-dependent effects. In addition, spleen vasculature becomes significantly more permeable following LPS treatment. We conclude that systemic inflammation affects nanoparticle distribution by multiple mechanisms, in a size dependent manner.

Structural studies of the streptavidin binding loop.

The streptavidin-biotin complex provides the basis for many important biotechnological applications and is an interesting model system for studying high-affinity protein-ligand interactions. We report here crystallographic studies elucidating the conformation of the flexible binding loop of streptavidin (residues 45 to 52) in the unbound and bound forms. The crystal structures of unbound streptavidin have been determined in two monoclinic crystal forms. The binding loop generally adopts an open conformation in the unbound species. In one subunit of one crystal form, the flexible loop adopts the closed conformation and an analysis of packing interactions suggests that protein-protein contacts stabilize the closed loop conformation. In the other crystal form all loops adopt an open conformation. Co-crystallization of streptavidin and biotin resulted in two additional, different crystal forms, with ligand bound in all four binding sites of the first crystal form and biotin bound in only two subunits in a second. The major change associated with binding of biotin is the closure of the surface loop incorporating residues 45 to 52. Residues 49 to 52 display a 3(10) helical conformation in unbound subunits of our structures as opposed to the disordered loops observed in other structure determinations of streptavidin. In addition, the open conformation is stabilized by a beta-sheet hydrogen bond between residues 45 and 52, which cannot occur in the closed conformation. The 3(10) helix is observed in nearly all unbound subunits of both the co-crystallized and ligand-free structures. An analysis of the temperature factors of the binding loop regions suggests that the mobility of the closed loops in the complexed structures is lower than in the open loops of the ligand-free structures. The two biotin bound subunits in the tetramer found in the MONO-b1 crystal form are those that contribute Trp 120 across their respective binding pockets, suggesting a structural link between these binding sites in the tetramer. However, there are no obvious signatures of binding site communication observed upon ligand binding, such as quaternary structure changes or shifts in the region of Trp 120. These studies demonstrate that while crystallographic packing interactions can stabilize both the open and closed forms of the flexible loop, in their absence the loop is open in the unbound state and closed in the presence of biotin. If present in solution, the helical structure in the open loop conformation could moderate the entropic penalty associated with biotin binding by contributing an order-to-disorder component to the loop closure.

Ser45 plays an important role in managing both the equilibrium and transition state energetics of the streptavidin-biotin system.

The contribution of the Ser45 hydrogen bond to biotin binding activation and equilibrium thermodynamics was investigated by biophysical and X-ray crystallographic studies. The S45A mutant exhibits a 1,700-fold greater dissociation rate and 907-fold lower equilibrium affinity for biotin relative to wild-type streptavidin at 37 degrees C, indicating a crucial role in binding energetics. The crystal structure of the biotin-bound mutant reveals only small changes from the wild-type bound structure, and the remaining hydrogen bonds to biotin retain approximately the same lengths. No additional water molecules are observed to replace the missing hydroxyl, in contrast to the previously studied D128A mutant. The equilibrium deltaG degrees, deltaH degrees, deltaS degrees, deltaC degrees(p), and activation deltaG++ of S45A at 37 degrees C are 13.7+/-0.1 kcal/mol, -21.1+/-0.5 kcal/mol, -23.7+/-1.8 cal/mol K, -223+/-12 cal/mol K, and 20.0+/-2.5 kcal/mol, respectively. Eyring analysis of the large temperature dependence of the S45A off-rate resolves the deltaH++ and deltaS++ of dissociation, 25.8+/-1.2 kcal/mol and 18.7+/-4.3 cal/mol K. The large increases of deltaH++ and deltaS++ in the mutant, relative to wild-type, indicate that Ser45 could form a hydrogen bond with biotin in the wild-type dissociation transition state, enthalpically stabilizing it, and constraining the transition state entropically. The postulated existence of a Ser45-mediated hydrogen bond in the wild-type streptavidin transition state is consistent with potential of mean force simulations of the dissociation pathway and with molecular dynamics simulations of biotin pullout, where Ser45 is seen to form a hydrogen bond with the ureido oxygen as biotin slips past this residue after breaking the native hydrogen bonds.

Thermodynamic and structural consequences of flexible loop deletion by circular permutation in the streptavidin-biotin system.

A circularly permuted streptavidin (CP51/46) has been designed to remove the flexible polypeptide loop that undergoes an open to closed conformational change when biotin is bound. The original termini have been joined by a tetrapeptide linker, and four loop residues have been removed, resulting in the creation of new N- and C-termini. Isothermal titration calorimetric studies show that the association constant has been reduced approximately six orders of magnitude below that of wild-type streptavidin to 10(7) M(-1). The deltaH degrees of biotin association for CP51/46 is reduced by 11.1 kcal/mol. Crystal structures of CP51/46 and its biotin complex show no significant alterations in the binding site upon removal of the loop. A hydrogen bond between Ser45 and Ser52 found in the absence of biotin is broken in the closed conformation as the side-chain hydroxyl of Ser45 moves to hydrogen bond to a ureido nitrogen of biotin. This is true in both the wild-type and CP51/46 forms of the protein, and the hydrogen bonding interaction might thus help nucleate closure of the loop. The reduced entropic cost of binding biotin to CP51/46 is consistent with the removal of this loop and a reduction in entropic costs associated with loop closure and immobilization. The reduced enthalpic contribution to the free energy of binding is not readily explainable in terms of the molecular structure, as the binding contacts are nearly entirely conserved, and only small differences in solvent accessible surfaces are observed relative to wild-type streptavidin.

Dissociation of tetrameric ions of noncovalent streptavidin complexes formed by electrospray ionization.

The noncovalent tetrameric association of the protein streptavidin formed by electrospray ionization (ESI) mass spectrometry has been observed intact and dissociated in the gas phase. An extended mass-to-charge ratio range quadrupole mass spectrometer was employed to examine the effects of harsher conditions in the ESI atmosphere-vacuum interface region on the streptavidin tetramer. Thermally induced dissociation caused the mass spectra to exhibit a series of complementary monomer and trimer ions that correspond to decomposition of the tetrameric species. Similar results were obtained with tandem mass spectrometric experiments on a Fourier transform ion cyclotron resonance mass spectrometer by application of sustained off-resonance irradiation (SORI) on a selected tetrameric charge state. The technique of single-frequency quadrupole excitation was used to accomplish selected-ion accumulation of the 14 + charge state of the tetramer during ion injection. Subsequent low energy SORI combined with broadband quadrupole cooling produced the 7 + monomer and 7 + trimer species, as well as the 6 + monomer and 8 + trimer complementary ions. The observed asymmetric breakup of the tetramer is qualitatively explained by using physical models.

Two-dimensional crystallization of streptavidin: in pursuit of the molecular origins of structure, morphology, and thermodynamics.

The streptavidin two-dimensional (2D) crystallization model has served as a paradigm for molecular self-assembly at interfaces. We have developed quantitative Brewster angle microscopy for the in situ measurement of spatially resolved relative protein surface densities. This allows investigation of both the thermodynamics and morphologies of 2D crystal growth. For crystal structure analysis, we employ TEM on grown crystals transferred to solid substrates. Comparison of results between commercially available streptavidin, recombinant streptavidin, and site-directed streptavidin mutants has provided insight into the protein protein and protein-lipid interactions that underlie 2D crystallization.

X-ray crystallographic studies of streptavidin mutants binding to biotin.

On the basis of high resolution crystallographic studies of streptavidin and its biotin complex, three principal binding motifs have been identified that contribute to the tight binding. A flexible binding loop can undergo a conformational change from an open to a closed form when biotin is bound. Additional studies described here of unbound wild-type streptavidin have provided structural views of the open conformation. Several tryptophan residues packing around the bound biotin constitute the second binding motif, one dominated by hydrophobic interactions. Mutation of these residues to alanine or phenylalanine have variable effects on the thermodynamics and kinetics of binding, but they generate only small changes in the molecular structure. Hydrogen bonding interactions also contribute significantly to the binding energetics of biotin, and the D128A mutation which breaks a hydrogen bond between the protein and a ureido NH group results in a significant structural alteration that could mimic an intermediate on the dissociation pathway. In this review, we summarize the structural aspects of biotin recognition that have been gained from crystallographic analyses of wild-type and site-directed streptavidin mutants.

Smart and biofunctional streptavidin.

The high affinity recognition of biotin and biotinylated molecules has made streptavidin one of the most important components in diagnostics and laboratory kits. While it is extremely useful as the native protein, there are many applications where its function can be improved re-engineering the subunits. We review here our efforts to construct streptavidin tetramers that have 'smart' recognition capabilities, and which display functional peptide sequences. These smart and biofunctional streptavidin derivatives can 'talk' to cells, and 'listen' to external signals which control capture and release of biotinylated molecules.

Development of new biotin/streptavidin reagents for pretargeting.

The high affinity of biotin for streptavidin has made this pair of molecules very useful for in vivo applications. To optimize reagents for one potential in vivo application, antibody-based pretargeting of cancer, we have prepared a number of new biotin and streptavidin derivatives. The derivatives developed include new radiolabeled biotin reagents, new protein biotinylation reagents, and new biotin multimers for cross-linking and/or polymerization of streptavidin. We have also modified streptavidin by site-directed mutation and chemical modification to improve its in vivo characteristics, and have developed new reagents for cross-linking antibody fragments with streptavidin. A brief overview of these new reagents is provided.

Streptavidin-biotin binding energetics.

The high affinity energetics in the streptavidin-biotin system provide an excellent model system for studying how proteins balance enthalpic and entropic components to generate an impressive overall free energy for ligand binding. We review here concerted site-directed mutagenesis, biophysical, and computational studies of aromatic and hydrogen bonding interaction energetics between streptavidin and biotin. These results also have provided insight into how streptavidin builds a large activation barrier to dissociation by managing the enthalpic and entropic activation components. Finally, we review recent studies of the biotin dissociation pathway that address the fundamental question of how ligands exit protein binding pockets.

The design and synthesis of polymers for eukaryotic membrane disruption.

The intracellular trafficking of drugs is critical to the efficacy of drugs that are susceptible to attack by lysosomal enzymes. It is therefore an important goal to design and synthesize molecules which can enhance the transport of endocytosed drugs from the endosomal compartments to the cytoplasm. The pH of an endosome is lower than that of the cytosol by one to two pH units, depending on the stage of endosomal development. This pH gradient is a key factor in the design of membrane-disruptive polymers which could enhance the endosomal release of drugs. Such polymers should disrupt lipid bilayer membranes at pH 6.5 and below, but should be non-lytic at pH 7.4. We have designed and synthesized pH-sensitive synthetic polymers which efficiently disrupt red blood cells within a sharply defined pH range. One of these polymers, poly(ethyl acrylic acid) (PEAAc) has been previously shown to disrupt synthetic vesicles in a pH-dependent fashion [6]. PEAAc hemolyzes red blood cells with an activity of 10(7) molecules per red blood cell, which is as efficient on a molar basis as the peptide melittin. The mechanism of RBC hemolysis by PEAAc is consistent with the colloid osmotic mechanism. PEAAc's hemolytic activity rises rapidly as the pH decreases from 6.3 to 5.0, and there is no hemolytic activity at pH 7.4. A related polymer, poly(propyl acrylic acid) (PPAAc), was synthesized to test whether making the pendant alkyl group more hydrophobic by adding one methylene group would increase the hemolytic activity. PPAAc was found to disrupt red blood cells 15 times more efficiently than PEAAc at pH 6.1. PPAAc was also not active at pH 7.4 and displayed a pH-dependent hemolysis that was shifted toward higher pH's. Random 1:1 copolymers of ethyl acrylate (EA) and acrylic acid (AAc) (which contain random -COOH and -C(2)H(5) groups that are present and regularly repeat in PEAAc) also displayed significant hemolytic activity, with an efficiency close to PEAAc. These results demonstrate that pH-sensitive synthetic polymers can be molecularly engineered to efficiently disrupt eukaryotic membranes within defined and narrow pH ranges. Thus, these polymers might serve as endosomal disruptive agents with specificities for early or late endosomes.

Molecular engineering of proteins and polymers for targeting and intracellular delivery of therapeutics.

There are many protein and DNA based therapeutics under development in the biotechnology and pharmaceutical industries. Key delivery challenges remain before many of these biomolecular therapeutics reach the clinic. Two important barriers are the effective targeting of drugs to specific tissues and cells and the subsequent intracellular delivery to appropriate cellular compartments. In this review, we summarize protein engineering work aimed at improving the stability and refolding efficiency of antibody fragments used in targeting, and at constructing new streptavidin variants which may offer improved performance in pre-targeting delivery strategies. In addition, we review recent work with pH-responsive polymers that mimic the membrane disruptive properties of viruses and toxins. These polymers could serve as alternatives to fusogenic peptides in gene therapy formulations and to enhance the intracellular delivery of protein therapeutics that function in the cytoplasm.

Constrained cell recognition peptides engineered into streptavidin.

Streptavidin is widely used as an adaptor molecule in diagnostics, separations, and laboratory assay applications. We have here engineered cell adhesive peptides into the three-dimensional scaffolding of streptavidin to convert streptavidin into a functional protein. The mutations did not alter refolding or tetramer assembly and the slow biotin dissociation rate of wild-type streptavidin was retained. The peptide targets were hexapeptide sequences derived from osteopontin and fibronectin that contain the RGD cell adhesion sequence. Cell binding assays directly demonstrated that rat aortic endothelial cells and human melanoma cells adhered to surfaces coated with either of the two RGD streptavidin mutants in a dose-dependent fashion. Wild-type streptavidin displayed no significant cell binding activity. Inhibition studies with soluble RGD peptides confirmed that the cell adhesion was RGD mediated. Further inhibition studies with antibodies directed against alphavbeta3 demonstrated that the RGD-streptavidin interaction was primarily mediated by this integrin with melanoma cells. These results demonstrate that peptide recognition sequences can be engineered into accessible surface regions of streptavidin without disrupting biotin binding properties. This approach to introducing secondary functional activities into streptavidin may improve streptavidin's utility in existing applications or provide new technology opportunities.

Engineered chimeric streptavidin tetramers as novel tools for bioseparations and drug delivery.

We report the construction of chimeric streptavidin tetramers that are composed of subunits of both wild-type (WT) streptavidin and genetically-engineered streptavidin variants designed for enhanced bioseparation and drug delivery performance. Subunit mixing is accomplished by guanidine thiocyanateinduced denaturation of an equimolar mixture of WT streptavidin and the respective site-directed mutant, followed by renaturation and reassociation of mixed tetramers. In the first example, we demonstrate the mixing of WT subunits with an Asn49Cys (N49C) mutant. The WT/n49C tetramers can be used for site-specific and stoichiometric attachment of therapeutics/imaging agents or targeting proteins through the genetically-engineered thiol while retaining unhindered access to biotin-binding at the WT subunits. Second, we demonstrate that the His127Cys mutation (H127C) results in a streptavidin mutant that forms a disulfide-linked dimer under non-reducing conditions. Mixing of H127C and WT streptavidin subunits results in chimeric tetramers where both the stoichiometry (WT:H127C::1:1) and subunit architecture is controlled by the unique disulfide bridge engineered into H127C. In the third example, WT subunits were mixed with the subunits of a site-directed mutant, Trp120Ala (W120A), which displays a biotin dissociation constant that is enhanced by more than 10(4) compared to WT streptavidin. The W120 biotin-binding affinity is sufficiently high (Ka approximately equal to 10(7) M-1) to immobilize the mutant on a biotinagarose affinity chromatography column, but the engineered off-rate allows for facile elution with excess biotin at physiological pH, whereas WT streptavidin is irreversibly immobilized on the column. We demonstrate that the purified WT/W120A chimeric tetramers combine the advantages of both subunits, allowing for irreversible immobilization of biotinylated targets at the WT subunit, while retaining the reversible separation capabilities of the W120A subunits via biotin-agarose affinity chromatography.