Progress and challenges in structural, in situ and operando characterization of single-atom catalysts by X-ray based synchrotron radiation techniques.

Single-atom catalysts (SACs) represent the ultimate size limit of nanoscale catalysts, combining the advantages of homogeneous and heterogeneous catalysts. SACs have isolated single-atom active sites that exhibit high atomic utilization efficiency, unique catalytic activity, and selectivity. Over the past few decades, synchrotron radiation techniques have played a crucial role in studying single-atom catalysis by identifying catalyst structures and enabling the understanding of reaction mechanisms. The profound comprehension of spectroscopic techniques and characteristics pertaining to SACs is important for exploring their catalytic activity origins and devising high-performance and stable SACs for industrial applications. In this review, we provide a comprehensive overview of the recent advances in X-ray based synchrotron radiation techniques for structural characterization and in situ/operando observation of SACs under reaction conditions. We emphasize the correlation between spectral fine features and structural characteristics of SACs, along with their analytical limitations. The development of IMST with spatial and temporal resolution is also discussed along with their significance in revealing the structural characteristics and reaction mechanisms of SACs. Additionally, this review explores the study of active center states using spectral fine characteristics combined with theoretical simulations, as well as spectroscopic analysis strategies utilizing machine learning methods to address challenges posed by atomic distribution inhomogeneity in SACs while envisaging potential applications integrating artificial intelligence seamlessly with experiments for real-time monitoring of single-atom catalytic processes.

Synergistic Sr Activation and Cr Buffering Effect on RuO2 Electronic Structures for Enhancing the Acidic Oxygen Evolution Reaction.

The oxygen evolution reaction (OER) performance of ruthenium-based oxides strongly correlates with the electronic structures of Ru. However, the widely adopted monometal doping method unidirectionally regulates only the electronic structures, often failing to balance the activity and stability. Here, we propose an "elastic electron transfer" strategy to achieve bidirectional optimization of the electronic structures of Sr, Cr codoped RuO2 catalysts for acidic OER. The introduction of electron-withdrawing Sr intrinsically activates the Ru sites by increasing the oxidation state of Ru. Simultaneously, Cr acts as an electron buffer, donating electrons to Ru in the presence of Sr in the as-prepared catalysts and absorbing excess electrons from Sr leaching during the OER. Such a bidirectional regulation feature of Cr prevents overoxidation of Ru and maintains its high oxidation state during the OER. The optimal Ru3Cr1Sr0.175 catalyst exhibits a low overpotential (214 mV @ 10 mA cm-2) and excellent stability (over 300 h).

Defective Tungsten Oxides with Stacking Faults for Proton Exchange Membrane Green-Hydrogen Generation.

Defects can introduce atomic structural modulation and tailor performance of materials. Herein, it demonstrates that semiconductor WO3 with inert electrocatalytic behavior can be activated through defect-induced tensile strains. Structural characterizations reveal that when simply treated in Ar/H2 atmosphere, oxygen vacancies will generate in WO3 and cause defective structures. Stacking faults are found in defects, thus modulating electronic structure and transforming electrocatalytic-inert WO3 into highly active electrocatalysts. Density functional theory (DFT) calculations are performed to calculate *H adsorption energies on various WOx surfaces, revealing the oxygen vacancy composition and strain predicted to optimize the catalytic activity of hydrogen evolution reaction (HER). Such defective tungsten oxides can be integrated into commercial proton exchange membrane (PEM) electrolyser with comparable performance toward Pt-based PEM. This work demonstrates defective metal oxides as promising non-noble metal catalysts for commercial PEM green-hydrogen generation.

Mn-Incorporation-Induced Phase Transition in Bottom-Up Synthesized Colloidal Sub-1-nm Ni(OH)2 Nanosheets for Enhanced Oxygen Evolution Catalysis.

Sub-1-nm structures are attractive for diverse applications owing to their unique properties compared to those of conventional nanomaterials. Transition-metal hydroxides are promising catalysts for oxygen evolution reaction (OER), yet there remains difficulty in directly fabricating these materials within the sub-1-nm regime, and the realization of their composition and phase tuning is even more challenging. Here we define a binary-soft-template-mediated colloidal synthesis of phase-selective Ni(OH)2 ultrathin nanosheets (UNSs) with 0.9 nm thickness induced by Mn incorporation. The synergistic interplay between binary components of the soft template is crucial to their formation. The unsaturated coordination environment and favorable electronic structures of these UNSs, together with in situ phase transition and active site evolution confined by the ultrathin framework, enable efficient and robust OER electrocatalysis. They exhibit a low overpotential of 309 mV at 100 mA cm-2 as well as remarkable long-term stability, representing one of the most high-performance noble-metal-free catalysts.

Boosting Alkaline Hydrogen Oxidation Kinetics through Interfacial Environments Induced Surface Migration of Adsorbed Hydroxyl.

Constructing bifunctional sites through heterojunction engineering to accelerate water formation has become a pivotal strategy to improve the alkaline hydrogen oxidation reaction (HOR) kinetics, which is mainly focused on the synergistic effect of neighboring sites and the energetics of the surface reaction steps. However, the roles of the surface migration of key intermediates that go beyond the bifunctional mechanism limited to neighboring atoms have usually been ignored. Using the heterostructured Ni3C-Ni catalyst as a model, we found that the rapid surface migration of OHad species from the positively charged Ni3C to the negatively charged Ni component played a decisive role in facilitating water formation. Such unprecedented surface migration of OHad is induced by the large discrepancy between the local surface charge densities and interfacial environments of the Ni3C and Ni components under operating conditions. Benefiting from this, the resultant Ni3C-Ni exhibited outstanding mass activity for the alkaline HOR, which was approximately 19-fold and 21-fold higher than those of Ni and Ni3C, respectively. These findings not only provide novel insights into the alkaline HOR mechanism of heterostructured catalysts but also open new avenues for developing advanced electrocatalysts for alkaline fuel cells.

Circumventing CO2 Reduction Scaling Relations Over the Heteronuclear Diatomic Catalytic Pair.

In the electrochemical CO2 reduction reaction (CO2RR), CO2 activation is always the first step, followed by the subsequent hydrogenation. The catalytic performance of CO2RR is intrinsically restricted by the competition between molecular CO2 activation and CO2 reduction product release. Here, we design a heteronuclear Fe1-Mo1 dual-metal catalytic pair on ordered porous carbon that features a high catalytic performance for driving electrochemical CO2 reduction to CO. Combining real-time near-ambient pressure X-ray photoelectron spectroscopy, operando 57Fe Mössbauer spectroscopy, and in situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy measurements with density functional theory calculations, chemical adsorption of CO2 is observed on the Fe1-Mo1 catalytic pair through a bridge configuration, which prompts the bending of the CO2 molecule for CO2 activation and then facilitates the subsequent hydrogeneration reaction. More importantly, the dynamic adsorption configuration transition from the bridge configuration of CO2 on Fe1-Mo1 to the linear configuration of CO on the Fe1 center results in breaking the scaling relationship in CO2RR, simultaneously promoting the CO2 activation and the CO release.

Recycling Waste Glyceroborate to Aqueous Lubricant for Tribological Applications.

The present study attempts to explore the direct recyclability of glyceroborate from medicine pharmaceutical production wastewater into an aqueous lubricant instead of conventional waste processing methods from the tribological view. In order to determine the tribological feasibility, the physicochemical properties of crude pharmaceutical wastewater are investigated and compared with those of pure glycerol to access their potential lubrication properties. The results demonstrated that the crude pharmaceutical wastewater has better friction-reducing and antiwear properties under the same working conditions. Besides outstanding lubricating properties, the friction-induced formation of borate tribo-film and intermediate FeOOH compound favors lowering of the shear stress between the rubbing surfaces. This finding better provides an alternative to transform glyceroborate from medicine pharmaceutical production wastewater after simple distillation processing to a potential aqueous lubricant.

Oxygen-Inserted Top-Surface Layers of Ni for Boosting Alkaline Hydrogen Oxidation Electrocatalysis.

Precisely tailoring the electronic structures of electrocatalysts to achieve an optimum hydroxide binding energy (OHBE) is vital to the alkaline hydrogen oxidation reaction (HOR). As a promising alternative to the Pt-group metals, considerable efforts have been devoted to exploring highly efficient Ni-based catalysts for alkaline HOR. However, their performances still lack practical competitiveness. Herein, based on insights from the molecular orbital theory and the Hammer-Nørskov d-band model, we propose an ingenious surface oxygen insertion strategy to precisely tailor the electronic structures of Ni electrocatalysts, simultaneously increasing the degree of energy-level alignment between the adsorbed hydroxide (*OH) states and surface Ni d-band and decreasing the degree of anti-bonding filling, which leads to an optimal OHBE. Through the pyrolysis procedure mediated by a metal-organic framework at a low temperature under a reducing atmosphere, the obtained oxygen-inserted two atomic-layer Ni shell-modified Ni metal core nanoparticle (Ni@Oi-Ni) exhibits a remarkable alkaline HOR performance with a record mass activity of 85.63 mA mg-1, which is 40-fold higher than that of the freshly synthesized Ni catalyst. Combining CO stripping experiments with ab initio calculations, we further reveal a linear relationship between the OHBE and the content of inserted oxygen, which thus results in a volcano-type correlation between the OH binding strength and alkaline HOR activity. This work indicates that the oxygen insertion into the top-surface layers is an efficient strategy to regulate the coordination environment and electronic structure of Ni catalysts and identifies the dominate role of OH binding strength in alkaline HOR.

Atomically Dispersed Manganese on Biochar Derived from a Hyperaccumulator for Photocatalysis in Organic Pollution Remediation.

Phytoremediation is a potentially cost-effective and environmentally friendly remediation method for environmental pollution. However, the safe treatment and resource utilization of harvested biomass has become a limitation in practical applications. To address this, a novel manganese-carbon-based single-atom catalyst (SAC) method has been developed based on the pyrolysis of a manganese hyperaccumulator, Phytolacca americana. In this method, manganese atoms are dispersed atomically in the carbon matrix and coordinate with N atoms to form a Mn-N4 structure. The SAC developed exhibited a high photooxidation efficiency and excellent stability during the degradation of a common organic pollutant, rhodamine B. The Mn-N4 site was the active center in the transformation of photoelectrons via the transfer of photoelectrons between adsorbed O2 and Mn to produce reactive oxygen species, identified by in situ X-ray absorption fine structure spectroscopy and density functional theory calculations. This work demonstrates an approach that increases potential utilization of biomass during phytoremediation and provides a promising design strategy to synthesize cost-effective SACs for environmental applications.

Strongly Coupled Cobalt Diselenide Monolayers for Selective Electrocatalytic Oxygen Reduction to H2 O2 under Acidic Conditions.

Electrosynthesis of hydrogen peroxide (H2 O2 ) in the acidic environment could largely prevent its decomposition to water, but efficient catalysts that constitute entirely earth-abundant elements are lacking. Here we report the experimental demonstration of narrowing the interlayer gap of metallic cobalt diselenide (CoSe2 ), which creates high-performance catalyst to selectively drive two-electron oxygen reduction toward H2 O2 in an acidic electrolyte. The enhancement of the interlayer coupling between CoSe2 atomic layers offers a favorable surface electronic structure that weakens the critical *OOH adsorption, promoting the energetics for H2 O2 production. Consequently, on the strongly coupled CoSe2 catalyst, we achieved Faradaic efficiency of 96.7 %, current density of 50.04 milliamperes per square centimeter, and product rate of 30.60 mg cm-2 h-1 . Moreover, this catalyst shows no sign of degradation when operating at -63 milliamperes per square centimeter over 100 hours.

A One-Dimensional π-d Conjugated Coordination Polymer for Sodium Storage with Catalytic Activity in Negishi Coupling.

π-d Conjugated coordination polymers (CCPs) have attracted much attention for various applications, although the chemical states and structures of many CCPs are still blurry. Now, a one-dimensional (1D) π-d conjugated coordination polymer for high performance sodium-ion batteries is presented. The chemical states of the obtained coordination polymer are clearly revealed. The electrochemical process undergoes a three-electron reaction and the structure transforms from C=N double bonds and NiII to C-N single bonds and NiI , respectively. Our unintentional experiments provided visual confirmation of NiI . The existence of NiI was further corroborated by its X-ray absorption near-edge structure (XANES) and its catalytic activity in Negishi cross-coupling.

Operando Spectroscopic Identification of Active Sites in NiFe Prussian Blue Analogues as Electrocatalysts: Activation of Oxygen Atoms for Oxygen Evolution Reaction.

Developing highly efficient oxygen evolution reaction (OER) catalysts and understanding their activity are pivotal for electrochemical conversion technologies. Here, we report NiFe Prussian blue analogue (PBA) as a promising electrocatalyst for OER in alkaline conditions. This material has an impressively low overpotential of 258 mV that reaches a current density of 10 mA cm-2. Post-mortem characterization showed that the as-prepared catalyst is entirely transformed into amorphous nickel hydroxide after the electrochemical treatment, and Ni(OH)2 acts as the active species. Operando X-ray spectroscopic studies further found that this in situ generated Ni(OH)2 displays an unique feature that allows deprotonation under applied potential creating NiOOH2- x that contains Ni4+ ions. The deprotonation reaction is reversible and potential-dependent, i.e., the amount of Ni4+ increases with increasing applied potential. Theoretical calculations were used to show that the role of Ni4+ is to trigger oxidized oxygen ions as electrophilic centers with the subsequent activation of anion redox reactions for OER.

In situ single iron atom doping on Bi2WO6 monolayers triggers efficient photo-fenton reaction.

Developing an efficient photocatalytic system for hydrogen peroxide (H2O2) activation in Fenton-like processes holds significant promise for advancing water purification technologies. However, challenges such as high carrier recombination rates, limited active sites, and suboptimal H2O2 activation efficiency impede optimal performance. Here we show that single-iron-atom dispersed Bi2WO6 monolayers (SIAD-BWOM), designed through a facile hydrothermal approach, can offer abundant active sites for H2O2 activation. The SIAD-BWOM catalyst demonstrates superior photo-Fenton degradation capabilities, particularly for the persistent pesticide dinotefuran (DNF), showcasing its potential in addressing recalcitrant organic pollutants. We reveal that the incorporation of iron atoms in place of tungsten within the electron-rich [WO4]2- layers significantly facilitates electron transfer processes and boosts the Fe(II)/Fe(III) cycle efficiency. Complementary experimental investigations and theoretical analyses further elucidate how the atomically dispersed iron induces lattice strain in the Bi2WO6 monolayer, thereby modulating the d-band center of iron to improve H2O2 adsorption and activation. Our research provides a practical framework for developing advanced photo-Fenton catalysts, which can be used to treat emerging and refractory organic pollutants more effectively.

Machine Learning-Assistant Colorimetric Sensor Arrays for Intelligent and Rapid Diagnosis of Urinary Tract Infection.

Urinary tract infections (UTIs), which can lead to pyelonephritis, urosepsis, and even death, are among the most prevalent infectious diseases worldwide, with a notable increase in treatment costs due to the emergence of drug-resistant pathogens. Current diagnostic strategies for UTIs, such as urine culture and flow cytometry, require time-consuming protocols and expensive equipment. We present here a machine learning-assisted colorimetric sensor array based on recognition of ligand-functionalized Fe single-atom nanozymes (SANs) for the identification of microorganisms at the order, genus, and species levels. Colorimetric sensor arrays are built from the SAN Fe1-NC functionalized with four types of recognition ligands, generating unique microbial identification fingerprints. By integrating the colorimetric sensor arrays with a trained computational classification model, the platform can identify more than 10 microorganisms in UTI urine samples within 1 h. Diagnostic accuracy of up to 97% was achieved in 60 UTI clinical samples, holding great potential for translation into clinical practice applications.

Restraining the escape of lattice oxygen enables superior cyclic performance towards high-voltage Ni-rich cathodes.

Layered Ni-rich cathodes, operating at high voltage with superior cyclic performance, are required to develop future high-energy Li-ion batteries. However, the worst lattice oxygen escape at the high-voltage region easily causes structural instability, rapid capacity fading and safety issues upon cycling. Here, we report a dual-track strategy to fully restrain the escape of lattice oxygen from Ni-rich cathodes within 2.7-4.5 V by one-step Ta doping and CeO2 coating according to their different diffusion energy barriers. The doped Ta can alleviate the charge compensation of oxygen anions as a positive charge centre to reduce the lattice oxygen escape and induce the formation of elongated primary particles, significantly inhibiting microcrack generation and propagation. Additionally, the layer of CeO2 coating effectively captures the remaining escaped oxygen and then the captured oxygen feeds back into the lattice during subsequent discharge. The resultant Ni-rich cathode enables a capacity of 231.3 mAh g-1 with a high initial coulombic efficiency of 93.5%. A pouch-type full cell comprising this cathode and a graphite anode exhibits >1000 times life cycles at 1C in the 2.7-4.5 V range, with 90.9% capacity retention.

Defect-Engineered Cu-Based Nanomaterials for Efficient CO2 Reduction over Ultrawide Potential Window.

High conversion efficiency over a wide operating potential window is important for the practical application of CO2 reduction electrocatalysis, yet that remains a huge challenge in differentiating the competing CO2 reduction and H2 evolution. Here we introduce point defects (Sn doping) and planar defects (grain boundary) into the Cu substrate. This multidimensional defect integration strategy guides the fabrication of highly diluted SnCu polycrystal, which exhibits high Faradaic efficiencies (>95%) toward CO2 electroreduction over an ultrawide potential window (ΔE = 1.3 V). The theoretical study indicates that the introduction of Sn doping and grain boundary synergistically provides an optimized electronic effect, which helps suppress H2 evolution and promotes the hydrogenation of *CO2.

Atomic high-spin cobalt(II) center for highly selective electrochemical CO reduction to CH3OH.

In this work, via engineering the conformation of cobalt active center in cobalt phthalocyanine molecular catalyst, the catalytic efficiency of electrochemical carbon monoxide reduction to methanol can be dramatically tuned. Based on a collection of experimental investigations and density functional theory calculations, it reveals that the electron rearrangement of the Co 3d orbitals of cobalt phthalocyanine from the low-spin state (S = 1/2) to the high-spin state (S = 3/2), induced by molecular conformation change, is responsible for the greatly enhanced CO reduction reaction performance. Operando attenuated total reflectance surface-enhanced infrared absorption spectroscopy measurements disclose accelerated hydrogenation of CORR intermediates, and kinetic isotope effect validates expedited proton-feeding rate over cobalt phthalocyanine with high-spin state. Further natural population analysis and density functional theory calculations demonstrate that the high spin Co2+ can enhance the electron backdonation via the dxz/dyz-2π* bond and weaken the C-O bonding in *CO, promoting hydrogenation of CORR intermediates.

Efficient acidic hydrogen evolution in proton exchange membrane electrolyzers over a sulfur-doped marcasite-type electrocatalyst.

Large-scale deployment of proton exchange membrane (PEM) water electrolyzers has to overcome a cost barrier resulting from the exclusive adoption of platinum group metal (PGM) catalysts. Ideally, carbon-supported platinum used at cathode should be replaced with PGM-free catalysts, but they often undergo insufficient activity and stability subjecting to corrosive acidic conditions. Inspired by marcasite existed under acidic environments in nature, we report a sulfur doping-driven structural transformation from pyrite-type cobalt diselenide to pure marcasite counterpart. The resultant catalyst drives hydrogen evolution reaction with low overpotential of 67 millivolts at 10 milliamperes per square centimeter and exhibits no degradation after 1000 hours of testing in acid. Moreover, a PEM electrolyzer with this catalyst as cathode runs stably over 410 hours at 1 ampere per square centimeter and 60°C. The marked properties arise from sulfur doping that not only triggers formation of acid-resistant marcasite structure but also tailors electronic states (e.g., work function) for improved hydrogen diffusion and electrocatalysis.

Dopant triggered atomic configuration activates water splitting to hydrogen.

Finding highly efficient hydrogen evolution reaction (HER) catalysts is pertinent to the ultimate goal of transformation into a net-zero carbon emission society. The design principles for such HER catalysts lie in the well-known structure-property relationship, which guides the synthesis procedure that creates catalyst with target properties such as catalytic activity. Here we report a general strategy to synthesize 10 kinds of single-atom-doped CoSe2-DETA (DETA = diethylenetriamine) nanobelts. By systematically analyzing these products, we demonstrate a volcano-shape correlation between HER activity and Co atomic configuration (ratio of Co-N bonds to Co-Se bonds). Specifically, Pb-CoSe2-DETA catalyst reaches current density of 10 mA cm-2 at 74 mV in acidic electrolyte (0.5 M H2SO4, pH ~0.35). This striking catalytic performance can be attributed to its optimized Co atomic configuration induced by single-atom doping.

Modulating Hydrogen Adsorption via Charge Transfer at the Semiconductor-Metal Heterointerface for Highly Efficient Hydrogen Evolution Catalysis.

Designing and synthesizing highly efficient and stable electrocatalysts for hydrogen evolution reaction (HER) is important for realizing the hydrogen economy. Tuning the electronic structure of the electrocatalysts is essential to achieve optimal HER activity, and interfacial engineering is an effective strategy to induce electron transfer in a heterostructure interface to optimize HER kinetics. In this study, ultrafine RhP2 /Rh nanoparticles are synthesized with a well-defined semiconductor-metal heterointerface embedded in N,P co-doped graphene (RhP2 /Rh@NPG) via a one-step pyrolysis. RhP2 /Rh@NPG exhibits outstanding HER performances under all pH conditions. Electrochemical characterization and first principles density functional theory calculations reveal that the RhP2 /Rh heterointerface induces electron transfer from metallic Rh to semiconductive RhP2 , which increases the electron density on the Rh atoms in RhP2 and weakens the hydrogen adsorption on RhP2 , thereby accelerating the HER kinetics. Moreover, the interfacial electron transfer activates the dual-site synergistic effect of Rh and P of RhP2 in neutral and alkaline environments, thereby promoting reorganization of interfacial water molecules for faster HER kinetics.