Aerogels for Phase-Change Materials in Functional and Multifunctional Composites: A Review.

Phase-change materials (PCMs) have gained more attention during the last few decades. As the main function of these materials is to store and release energy in the form of latent heat during phase transitions, they perfectly fulfill the direction of modern research focused on energy-related topics. Although they have basic energy-related properties, recent research shows a need to upgrade those materials in terms of improving their common drawbacks like shape stability, leakage, and poor conductivity. The research related to PCM-based composites leads to imparting some additional functional properties such as different types of conversion abilities or extra performance such as shape memory and thermal protection. Together with a new emerging material group-aerogels (AGs), extra-light and highly porous matrices-PCMs could become functional and multifunctional materials. AG-PCM composites could be implemented in a large variety of applications in different sectors like energy, buildings, medical, defense, space technologies, and more. This study aims to help summarize current trends, methods, and works on PCM-aerogel composites in terms of developing new functional materials, especially for energy conversion purposes but also for improved conductivity, mechanical properties, and flame retardancy.

Aging Process of Biocomposites with the PLA Matrix Modified with Different Types of Cellulose.

In the modern world, many products are disposable or have a very short lifespan, while at the same time, those products are made from materials that will remain in the environment in the form of waste for hundreds or even thousands of years. It is a serious problem; non-biodegradable polymer wastes are part of environmental pollution and generate microplastics, which accumulate in the organisms of living beings. One of the proposed solutions is biodegradable polymers and their composites. In our work, three types of polylactide-based composites with plant-derived fillers: microcellulose powder, short flax fibers, and wood flour at 2 wt.% were prepared. Poly(lactic acid) (PLA)-based biocomposite properties were characterized in terms of mechanical and surface properties together with microscopic analysis and Fourier-transform infrared spectroscopy (FTIR), before and after a UV (ultraviolet)-light-aging process to determine the effects of each cellulose-based additive on the UV-induced degradation process. This research shows that the addition of a cellulose additive can improve the properties of the material in terms of the UV-aging process, but the form of the chosen cellulose form plays a crucial role in this case. The testing of physicochemical properties demonstrated that not only can mechanical properties be improved, but also the time of degradation under UV light exposure can be controlled by the proper selection of the reinforcing phase and the parameters of the extrusion and injection molding process. The obtained results turned out to be very interesting, not only in terms of the cost reduction of the biocomposites themselves, as mainly the waste from the wood industry was used as a low-cost filler, but also that the additive delays the aging process occurring during UV light exposure. Even a small, 2 wt.% addition of some of the tested forms of cellulose delayed surface degradation, which is one of the most important factors affecting the biodegradation process.